Skip to content
Modified lib of sandeepmistry arduino-LoRa for STM32F103
Branch: master
Clone or download
Permalink
Type Name Latest commit message Commit time
Failed to load latest commit information.
examples first commit Jan 24, 2018
src first commit Jan 24, 2018
.travis.yml first commit Jan 24, 2018
API.md first commit Jan 24, 2018
LICENSE first commit Jan 24, 2018
README.md Update README.md Jan 24, 2018
antenna types.jpg added recommend antenna details May 16, 2018
keywords.txt first commit Jan 24, 2018
library.properties first commit Jan 24, 2018

README.md

Arduino LoRa For STM32F103CB

Build Status

An Arduino library for sending and receiving data using LoRa radios.

Semtech SX1276/77/78/79 wiring

Semtech SX1276/77/78/79 Arduino(STM32F103CB)
VCC 3.3V
GND GND
SCK SCK
MISO MISO
MOSI MOSI
NSS PA4
NRESET PC13
DIO0 PA1
DIO1 PB13
DIO2 PB12
Charger Header J4 Battery 3.7V Li
1 +
2 -
Charge Value Arduino(STM32F103CB)
Divinder 430K/1.5M PA0

Board Header Details

Header J1 Pins Arduino(STM32F103CB)
1 3.3V
2 PB9
3 PB8
4 GND
5 GND
6 PB1
7 PB0
8 GND
9 PA2
10 PA3
11 PB10
12 PB11
13 GND
Header J2 Pins Arduino(STM32F103CB)
1 5V
2 GND
3 PB5
4 PB4
5 PB3
6 PA15
7 PA12
8 PA11
9 PA8
10 PB15
11 PB14
12 GND
13 GND
Header J3 Pins Arduino(STM32F103CB)
1 3.3V
2 SWIO
3 SWCLK
4 GND
Header J5 Pins Arduino(STM32F103CB)
1 3.3V
2 GND
3 PB6/SCL
4 PB7/SDA
Header J7 Row One Pins Arduino(STM32F103CB) Header J7 Row Two Pins Arduino(STM32F103CB)
1 3.3V 2 3.3V
3 BOOT0 4 BOOT1
5 GND 6 GND

NOTES: While Programming through on board USB (CH340 USB to UART Driver required in windows) connected to STM32F103CB's PA10/USART1_RX and PA9/USART1_TX select the following in Arduino IDE

| Board :Generic STM32F103C Series |

| Variant : STM32F103CB(20k RAM,128k Flash) |

| CPU Speed:72MHz Normal |

| Upload Meathod: Serial |

| Port should be picked as per windows (Com 1,2,3 etc) |

To add STM32 board to arduino ide use https://github.com/rogerclarkmelbourne/Arduino_STM32

Header J7 should be set as following for programming

Pin 1 --- Pin 3 Short using Jumper

Pin 4 --- Pin 6 Short using Jumper

Press reset pin S3 before pressing upload button

Header J7 should be set as following to run application program

Pin 3 --- Pin 5 Short using Jumper

Pin 4 --- Pin 6 Short using Jumper

Press reset pin S3 after this

NSS, NRESET, and DIO0 pins can be changed by using LoRa.setPins(ss, reset, dio0). DIO0 pin is optional, it is only needed for receive callback mode. If DIO0 pin is used, it must be interrupt capable via attachInterrupt(...).

Installation

Using the Arduino IDE Library Manager

  1. Choose Sketch -> Include Library -> Manage Libraries...
  2. Type LoRa into the search box.
  3. Click the row to select the library.
  4. Click the Install button to install the library.

Using Git

cd ~/Documents/Arduino/libraries/
git clone https://github.com/sandeepmistry/arduino-LoRa LoRa

API

See API.md.

Examples

See examples folder.

FAQ

1) Initilizating the LoRa radio is failing

Please check the wiring you are using matches what's listed in Semtech SX1276/77/78/79 wiring. You can also use LoRa.setPins(ss, reset, dio0) to change the default pins used. Some logic level converters cannot operate at 8 MHz, you can call LoRa.setSPIFrequency(frequency) to lower the SPI frequency used by the library. Both API's must be called before LoRa.begin(...).

2) Can other radios see the packets I'm sending?

Yes, any LoRa radio that are configured with the same radio parameters and in range can see the packets you send.

3) Is the data I'm sending encrypted?

No, all data is sent unencrypted. If want your packet data to be encrypted, you must encrypt it before passing it into this library, followed by decrypting on the receiving end.

4) How does this library differ from LoRaWAN libraries?

This library exposes the LoRa radio directly, and allows you to send data to any radios in range with same radio parameters. All data is broadcasted and there is no addressing. LoRaWAN builds on top of LoRA, but adds addressing, encryption, and additional layers. It also requires a LoRaWAN gateway and LoRaWAN network and application server.

License

This libary is licensed under the MIT Licence.

arduino-LoRa-STM32

You can’t perform that action at this time.