forked from openwrt/openwrt
Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
ramips: add support for DomyWifi DM202/DM203/DW22D
Specifications: * SOC: MT7620A + MT7610E * ROM: 16 MiB spi flash (W25Q128FVSG) * RAM: 128 MiB DDR2 (W971GG6KB-25) * WAN: 10/100M *1 * LAN: 10/100M *4 * USB: Type-A USB2.0 *1 * SD: MicroSD *1 * Button: Reset *1 * Antennas: 2.4 GHz *2 + 5 GHz *1 * TTL Baudrate: 57600 * U-Boot Recovery: IP: 10.10.10.123, Server: 10.10.10.3 Installation: * Web UI Update 1. Open http://192.168.10.1/upgrade.html in the browser. 2. Rename firmware to a short name like firmware.bin and then upload it. 3. Fill in the password column with the following content: password | mtd -x mIp2osnRG3qZGdIlQPh1 -r write /tmp/firmware.bin firmware * TFTP + U-Boot 1. Connect device with a TTL cable. 2. Press "2" when booting to select "Load system code then write to Flash via TFTP". 3. Upload firmware by tftpd64, it will boot when write instruction is executed. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
- Loading branch information
1 parent
0914328
commit a73a826
Showing
7 changed files
with
255 additions
and
0 deletions.
There are no files selected for viewing
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Original file line number | Diff line number | Diff line change |
---|---|---|
@@ -0,0 +1,189 @@ | ||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT | ||
|
||
#include "mt7620a.dtsi" | ||
|
||
#include <dt-bindings/gpio/gpio.h> | ||
#include <dt-bindings/input/input.h> | ||
|
||
/ { | ||
aliases { | ||
led-boot = &led_system_amber; | ||
led-failsafe = &led_system_amber; | ||
led-running = &led_system_green; | ||
led-upgrade = &led_system_amber; | ||
}; | ||
|
||
keys { | ||
compatible = "gpio-keys"; | ||
|
||
reset { | ||
label = "reset"; | ||
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; | ||
linux,code = <KEY_RESTART>; | ||
}; | ||
}; | ||
|
||
leds { | ||
compatible = "gpio-leds"; | ||
|
||
led_system_green: system_green { | ||
label = "green:system"; | ||
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; | ||
}; | ||
|
||
led_system_amber: system_amber { | ||
label = "amber:system"; | ||
gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; | ||
}; | ||
|
||
internet_green { | ||
label = "green:internet"; | ||
gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; | ||
}; | ||
|
||
internet_amber { | ||
label = "amber:internet"; | ||
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; | ||
}; | ||
|
||
lan1 { | ||
label = "amber:lan1"; | ||
gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; | ||
}; | ||
|
||
lan2 { | ||
label = "amber:lan2"; | ||
gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; | ||
}; | ||
|
||
lan3 { | ||
label = "amber:lan3"; | ||
gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; | ||
}; | ||
|
||
lan4 { | ||
label = "amber:lan4"; | ||
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; | ||
}; | ||
|
||
wan { | ||
label = "amber:wan"; | ||
gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; | ||
}; | ||
|
||
wlan2g { | ||
label = "green:wlan2g"; | ||
gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; | ||
linux,default-trigger = "phy1tpt"; | ||
}; | ||
}; | ||
}; | ||
|
||
&gpio1 { | ||
status = "okay"; | ||
}; | ||
|
||
&gpio3 { | ||
status = "okay"; | ||
}; | ||
|
||
&spi0 { | ||
status = "okay"; | ||
|
||
flash@0 { | ||
compatible = "jedec,spi-nor"; | ||
reg = <0>; | ||
spi-max-frequency = <80000000>; | ||
m25p,fast-read; | ||
|
||
partitions { | ||
compatible = "fixed-partitions"; | ||
#address-cells = <1>; | ||
#size-cells = <1>; | ||
|
||
partition@0 { | ||
label = "bootloader"; | ||
reg = <0x0 0x30000>; | ||
read-only; | ||
}; | ||
|
||
partition@30000 { | ||
label = "config"; | ||
reg = <0x30000 0x10000>; | ||
read-only; | ||
}; | ||
|
||
factory: partition@40000 { | ||
label = "factory"; | ||
reg = <0x40000 0x10000>; | ||
read-only; | ||
}; | ||
|
||
partition@50000 { | ||
compatible = "denx,uimage"; | ||
label = "firmware"; | ||
reg = <0x50000 0xfb0000>; | ||
}; | ||
}; | ||
}; | ||
}; | ||
|
||
&state_default { | ||
gpio { | ||
groups = "uartf", "rgmii1", "wled"; | ||
function = "gpio"; | ||
}; | ||
}; | ||
|
||
ðernet { | ||
pinctrl-names = "default"; | ||
pinctrl-0 = <&ephy_pins>; | ||
|
||
mediatek,portmap = "wllll"; | ||
|
||
nvmem-cells = <&macaddr_factory_28>; | ||
nvmem-cell-names = "mac-address"; | ||
}; | ||
|
||
&sdhci { | ||
status = "okay"; | ||
}; | ||
|
||
&ehci { | ||
status = "okay"; | ||
}; | ||
|
||
&ohci { | ||
status = "okay"; | ||
}; | ||
|
||
&pcie { | ||
status = "okay"; | ||
}; | ||
|
||
&pcie0 { | ||
wifi@0,0 { | ||
reg = <0x0000 0 0 0 0>; | ||
mediatek,mtd-eeprom = <&factory 0x8000>; | ||
ieee80211-freq-limit = <5000000 6000000>; | ||
|
||
led { | ||
led-sources = <0>; | ||
led-active-low; | ||
}; | ||
}; | ||
}; | ||
|
||
&wmac { | ||
ralink,mtd-eeprom = <&factory 0x0>; | ||
}; | ||
|
||
&factory { | ||
compatible = "nvmem-cells"; | ||
#address-cells = <1>; | ||
#size-cells = <1>; | ||
|
||
macaddr_factory_28: macaddr@28 { | ||
reg = <0x28 0x6>; | ||
}; | ||
}; |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Original file line number | Diff line number | Diff line change |
---|---|---|
@@ -0,0 +1,8 @@ | ||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT | ||
|
||
#include "mt7620a_domywifi.dtsi" | ||
|
||
/ { | ||
compatible = "domywifi,dm202", "ralink,mt7620a-soc"; | ||
model = "DomyWifi DM202"; | ||
}; |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Original file line number | Diff line number | Diff line change |
---|---|---|
@@ -0,0 +1,8 @@ | ||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT | ||
|
||
#include "mt7620a_domywifi.dtsi" | ||
|
||
/ { | ||
compatible = "domywifi,dm203", "ralink,mt7620a-soc"; | ||
model = "DomyWifi DM203"; | ||
}; |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Original file line number | Diff line number | Diff line change |
---|---|---|
@@ -0,0 +1,8 @@ | ||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT | ||
|
||
#include "mt7620a_domywifi.dtsi" | ||
|
||
/ { | ||
compatible = "domywifi,dw22d", "ralink,mt7620a-soc"; | ||
model = "DomyWifi DW22D"; | ||
}; |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters