Light Mixer made in MAXMSPJITTER. Uses ENTTEC DMXUSBPRO. TapTools XML file for the lighting patch.
Switch branches/tags
Nothing to show
Clone or download
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Failed to load latest commit information.
ARTICA_BW-smaller.jpg
ARTICA_DMX_CONTROL.maxpat
CUELIST
EINSTEIN_whitestroke.png
README.md
artica_dmx.xml
cueList.maxpat
dmx_channel_display.maxpat
dmx_channel_page copy.maxpat
dmx_channel_page.maxpat
dmx_cue_page.maxpat
dmx_dmxusbpro.maxpat
dmx_message_router.maxpat
dmx_message_router_8th.maxpat
dmx_message_router_holder.maxpat
dmx_multiplier.maxpat
dmx_sub_master.maxpat
dmx_sub_master_page.maxpat
number_ramp.maxpat
number_ramp_double.maxpat
number_ramp_single.maxpat
p1.json
scaler.maxpat
xml_list_parser.maxpat
xml_parser.maxpat
xml_parser_holder.maxpat
xml_parser_populater.maxpat

README.md

maxmsp_dmx_control

DMX Controller / Light Mixer made in MAXMSPJITTER. Author: Guilherme Martins, ARTICACC http://artica.cc

Source code available at: http://github.com/artica/maxmsp_dmx_control



Hardware used:ENTTEC DMXUSBPRO. DMX interface Max object: dmxusbpro


INSTRUCTIONS:


Connect the ENTTEC DMXUSBPRO.

Run ARTICA_DMX_CONTROL.maxpat

Wait until 2 Windows fully open, might take a couple of seconds or even minutes, depending on your CPU power.

Window 1: ARTICA_DMX_CONTROL | Submasters and Cues Window 2: DMX_CHANNEL_PAGE | Channels and ENTTEC detector

Click OPENXML button and select the "DMX_LIGHT_PATCH.xml" file

Move sliders and look and the 2nd window and see if the DMX channels change accordingly


ENTTEC:


Tap the "menu" button on the window 2, and select the serial port


XML:


TapTools XML external is used to parse xml file. This XML file is your light patch. Each <sub_#> defines the DMX channels and values assigned to the Submaster #.


CUES:


This cue system is very basic and will be updated asap. Basically you can define an IN and OUT time ramp for each Submaster and record it on a .JSON file. Altouth the file is automatically readed, you can always use the red and blue button to record and read the LIGHT_CUELIST.JSON file. Use the PREV and NEXT button to walk through the cues.