Skip to content
master
Switch branches/tags
Code

Latest commit

 

Git stats

Files

Permalink
Failed to load latest commit information.
Type
Name
Latest commit message
Commit time
 
 
 
 

zbx-hpsmartarray

PowerShell script for monitoring HP SmartArray RAID controllers (Zabbix)

Zabbix Share page: https://share.zabbix.com/storage-devices/hp/hp-smart-array-controller
Also you can contact me with Telegram: @asand3r

alt_text

zbx-hpsmartarray provides possibility to make Low Level Discovery of HP Smart Array components, such as controllers, logical and physical drives. Also you can request health status of each discovered component. The script wrote with PowerShell and works from version 3.0. To communicate with Smart Array it's using HP Array Configuration Utility or HP Smart Storage Administrator toolkit which you must install yourself.

Latest stable version: 0.4.8

Please, read Requirements and Installation section in Wiki before use. Need to edit zabbix_agentd.conf file.

Notice

Please, attend! Version 0.4 works only with PowerShell v3.0 and above becouse contains ConvertTo-JSON cmdlet. For now, v0.3.x and v0.4 are same in syntax and functionality, so if you have only PowerShell v2.0, you must use v0.3.x without care.

Dependencies

  • HP Array Configuration Utility or HP Smart Storage Administrator

Feautres

Low Level Discovery:

  • physical disks
  • virtual disks
  • controllers

Component status:

  • physical disks
  • virtual disks
  • controllers (main status, cache status and battery status)

Supported arguments

-action
What we want to do - make LLD or get component health status (takes: lld, health)
-part
Smart array component - controller, logical drive or physical drive (takes: ctrl, ld, pd)
-partid
Part of target, depends of context:

  • controllers: main controller status, it's battery or cache status (takes: main, batt, cache);
  • logical drives: id of logical drive (takes: 1, 2, 3, 4 etc);
  • physical drives: id of physical drive (takes: 1E:1:1..2E:1:12 etc)

-ctrlid
Controller id. By default it's slot number where controller installed (before v0.3 it was s/n).
-version
Print script version and exit.

Usage

You can find more examples on Wiki page, but I placed some cases here too.

  • LLD of enclosures, controllers, virtual disks and physical disks:
PS C:\> .\zbx-hpsmartarray.ps1 -action lld -part ctrl

{"data":[{"{#VDISKNAME}":"vDisk01"},{"{#VDISKNAME}":"vDisk02"},"{#CTRL.SLOT}":"0"}]}
  • Request health status of one component. E.g. disk '2E:1:12':
PS C:\> .\zbx-hpsmartarray.ps1 -action health -ctrlid 0 -part pd -identity 2E:1:12

Rebuilding

Or just using positional parameters:

PS C:\> .\zbx-hpsmartarray.ps1 healthd 0 pd 2E:1:12

Rebuilding

Zabbix templates

In addition I've attached preconfigured Zabbix Template here, so you can use it in your environment. It's using Low Level Discovery functionality.
Have fun and rate it on share.zabbix.com if you like it. =)

Tested with:
HP SmartArray P800, Smart Array P420i, Smart Array P440ar, Smart Array B110i

About

PowerShell script for monitoring HP SmartArray RAID controllers (Zabbix)

Resources

License

Stars

Watchers

Forks

Packages

No packages published