Mouse Control Functions
The Screen and Mouse Position
Locations on your screen are referred to by X and Y Cartesian coordinates. The X coordinate starts at 0 on the left side and increases going right. Unlike in mathematics, the Y coordinate starts at 0 on the top and increases going down.
0,0 X increases --> +---------------------------+ | | Y increases | | | | 1920 x 1080 screen | | | | V | | | | +---------------------------+ 1919, 1079
The pixel at the top-left corner is at coordinates 0, 0. If your screen's resolution is 1920 x 1080, the pixel in the lower right corner will be 1919, 1079 (since the coordinates begin at 0, not 1).
The screen resolution size is returned by the
size() function as a tuple of two integers. The current X and Y coordinates of the mouse cursor are returned by the
>>> pyautogui.size() (1920, 1080) >>> pyautogui.position() (187, 567)
Here is a short Python 3 program that will constantly print out the position of the mouse cursor:
#! python3 import pyautogui, sys print('Press Ctrl-C to quit.') try: while True: x, y = pyautogui.position() positionStr = 'X: ' + str(x).rjust(4) + ' Y: ' + str(y).rjust(4) print(positionStr, end='') print('\b' * len(positionStr), end='', flush=True) except KeyboardInterrupt: print('\n')
Here is the Python 2 version:
#! python import pyautogui, sys print('Press Ctrl-C to quit.') try: while True: x, y = pyautogui.position() positionStr = 'X: ' + str(x).rjust(4) + ' Y: ' + str(y).rjust(4) print positionStr, print '\b' * (len(positionStr) + 2), sys.stdout.flush() except KeyboardInterrupt: print '\n'
To check if XY coordinates are on the screen, pass them (either as two integer arguments or a single tuple/list arguments with two integers) to the
onScreen() function, which will return
True if they are within the screen's boundaries and
False if not. For example:
>>> pyautogui.onScreen(0, 0) True >>> pyautogui.onScreen(0, -1) False >>> pyautogui.onScreen(0, 99999999) False >>> pyautogui.size() (1920, 1080) >>> pyautogui.onScreen(1920, 1080) False >>> pyautogui.onScreen(1919, 1079) True
moveTo() function will move the mouse cursor to the X and Y integer coordinates you pass it. The
None value can be passed for a coordinate to mean "the current mouse cursor position". For example:
>>> pyautogui.moveTo(100, 200) # moves mouse to X of 100, Y of 200. >>> pyautogui.moveTo(None, 500) # moves mouse to X of 100, Y of 500. >>> pyautogui.moveTo(600, None) # moves mouse to X of 600, Y of 500.
Normally the mouse cursor will instantly move to the new coordinates. If you want the mouse to gradually move to the new location, pass a third argument for the duration (in seconds) the movement should take. For example:
>>> pyautogui.moveTo(100, 200, 2) # moves mouse to X of 100, Y of 200 over 2 seconds
(If the duration is less than
pyautogui.MINIMUM_DURATION the movement will be instant. By default,
pyautogui.MINIMUM_DURATION is 0.1.)
If you want to move the mouse cursor over a few pixels relative to its current position, use the
move() function. This function has similar parameters as
moveTo(). For example:
>>> pyautogui.moveTo(100, 200) # moves mouse to X of 100, Y of 200. >>> pyautogui.move(0, 50) # move the mouse down 50 pixels. >>> pyautogui.move(-30, 0) # move the mouse left 30 pixels. >>> pyautogui.move(-30, None) # move the mouse left 30 pixels.
drag() functions have similar parameters as the
move() functions. In addition, they have a
button keyword which can be set to
'right' for which mouse button to hold down while dragging. For example:
>>> pyautogui.dragTo(100, 200, button='left') # drag mouse to X of 100, Y of 200 while holding down left mouse button >>> pyautogui.dragTo(300, 400, 2, button='left') # drag mouse to X of 300, Y of 400 over 2 seconds while holding down left mouse button >>> pyautogui.drag(30, 0, 2, button='right') # drag the mouse left 30 pixels over 2 seconds while holding down the right mouse button
Tween / Easing Functions
Tweening is an extra feature to make the mouse movements fancy. You can probably skip this section if you don't care about this.
A tween or easing function dictates the progress of the mouse as it moves to its destination. Normally when moving the mouse over a duration of time, the mouse moves directly towards the destination in a straight line at a constant speed. This is known as a linear tween or linear easing function.
PyAutoGUI has other tweening functions available in the
pyautogui module. The
pyautogui.easeInQuad function can be passed for the 4th argument to
drag() functions to have the mouse cursor start off moving slowly and then speeding up towards the destination. The total duration is still the same as the argument passed to the function. The
pyautogui.easeOutQuad is the reverse: the mouse cursor starts moving fast but slows down as it approaches the destination. The
pyautogui.easeOutElastic will overshoot the destination and "rubber band" back and forth until it settles at the destination.
>>> pyautogui.moveTo(100, 100, 2, pyautogui.easeInQuad) # start slow, end fast >>> pyautogui.moveTo(100, 100, 2, pyautogui.easeOutQuad) # start fast, end slow >>> pyautogui.moveTo(100, 100, 2, pyautogui.easeInOutQuad) # start and end fast, slow in middle >>> pyautogui.moveTo(100, 100, 2, pyautogui.easeInBounce) # bounce at the end >>> pyautogui.moveTo(100, 100, 2, pyautogui.easeInElastic) # rubber band at the end
These tweening functions are copied from Al Sweigart's PyTweening module: https://pypi.python.org/pypi/PyTweening https://github.com/asweigart/pytweening This module does not have to be installed to use the tweening functions.
If you want to create your own tweening function, define a function that takes a single float argument between
0.0 (representing the start of the mouse travelling) and
1.0 (representing the end of the mouse travelling) and returns a float value between
click() function simulates a single, left-button mouse click at the mouse's current position. A "click" is defined as pushing the button down and then releasing it up. For example:
>>> pyautogui.click() # click the mouse
To combine a
moveTo() call before the click, pass integers for the
y keyword argument:
>>> pyautogui.click(x=100, y=200) # move to 100, 200, then click the left mouse button.
To specify a different mouse button to click, pass
'right'``for the ``button keyword argument:
>>> pyautogui.click(button='right') # right-click the mouse
To do multiple clicks, pass an integer to the
clicks keyword argument. Optionally, you can pass a float or integer to the
interval keyword argument to specify the amount of pause between the clicks in seconds. For example:
>>> pyautogui.click(clicks=2) # double-click the left mouse button >>> pyautogui.click(clicks=2, interval=0.25) # double-click the left mouse button, but with a quarter second pause in between clicks >>> pyautogui.click(button='right', clicks=3, interval=0.25) ## triple-click the right mouse button with a quarter second pause in between clicks
As a convenient shortcut, the
doubleClick() function will perform a double click of the left mouse button. It also has the optional
button keyword arguments. For example:
>>> pyautogui.doubleClick() # perform a left-button double click
There is also a
tripleClick() function with similar optional keyword arguments.
rightClick() function has optional
y keyword arguments.
The mouseDown() and mouseUp() Functions
Mouse clicks and drags are composed of both pressing the mouse button down and releasing it back up. If you want to perform these actions separately, call the
mouseUp() functions. They have the same
button. For example:
>>> pyautogui.mouseDown(); pyautogui.mouseUp() # does the same thing as a left-button mouse click >>> pyautogui.mouseDown(button='right') # press the right button down >>> pyautogui.mouseUp(button='right', x=100, y=200) # move the mouse to 100, 200, then release the right button up.
The mouse scroll wheel can be simulated by calling the
scroll() function and passing an integer number of "clicks" to scroll. The amount of scrolling in a "click" varies between platforms. Optionally, integers can be passed for the the
y keyword arguments to move the mouse cursor before performing the scroll. For example:
>>> pyautogui.scroll(10) # scroll up 10 "clicks" >>> pyautogui.scroll(-10) # scroll down 10 "clicks" >>> pyautogui.scroll(10, x=100, y=100) # move mouse cursor to 100, 200, then scroll up 10 "clicks"
On OS X and Linux platforms, PyAutoGUI can also perform horizontal scrolling by calling the hscroll() function. For example:
>>> pyautogui.hscroll(10) # scroll right 10 "clicks" >>> pyautogui.hscroll(-10) # scroll left 10 "clicks"
scroll() function is a wrapper for
vscroll(), which performs vertical scrolling.