Permalink
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
Removed min_save_interval: 180s as breaking change in total_daily_energy in ESPhome 2022.8.0 Added preference and flash_write_interval to replace it
136 lines (109 sloc)
2.74 KB
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| substitutions: | |
| device_name: "athom-smart-plug-v2" | |
| friendly_name: "Athom Smart Plug V2" | |
| project_name: "athom.smart-plug-v2" | |
| project_version: "1.0" | |
| relay_restore_mode: RESTORE_DEFAULT_OFF | |
| esphome: | |
| name: "${device_name}" | |
| name_add_mac_suffix: true | |
| project: | |
| name: "${project_name}" | |
| version: "${project_version}" | |
| esp8266: | |
| board: esp8285 | |
| restore_from_flash: true | |
| preferences: | |
| flash_write_interval: 180sec | |
| api: | |
| ota: | |
| logger: | |
| baud_rate: 0 | |
| mdns: | |
| disabled: false | |
| web_server: | |
| port: 80 | |
| wifi: | |
| ap: {} # This spawns an AP with the device name and mac address with no password. | |
| captive_portal: | |
| dashboard_import: | |
| package_import_url: github://athom-tech/athom-configs/athom-smart-plug-v2.yaml | |
| uart: | |
| rx_pin: RX | |
| baud_rate: 4800 | |
| binary_sensor: | |
| - platform: status | |
| name: "${friendly_name} Status" | |
| - platform: gpio | |
| pin: | |
| number: 5 | |
| mode: INPUT_PULLUP | |
| inverted: true | |
| name: "${friendly_name} Power Button" | |
| disabled_by_default: true | |
| on_multi_click: | |
| - timing: | |
| - ON for at most 1s | |
| - OFF for at least 0.2s | |
| then: | |
| - switch.toggle: relay | |
| - timing: | |
| - ON for at least 4s | |
| then: | |
| - button.press: restart_button | |
| sensor: | |
| - platform: uptime | |
| name: "${friendly_name} Uptime Sensor" | |
| - platform: cse7766 | |
| update_interval: 10s | |
| current: | |
| name: "${friendly_name} Current" | |
| filters: | |
| - lambda: if (x < 0.060) return 0.0; else return x; #For the chip will report less than 3w power when no load is connected | |
| voltage: | |
| name: "${friendly_name} Voltage" | |
| power: | |
| name: "${friendly_name} Power" | |
| id: power_sensor | |
| filters: | |
| - lambda: if (x < 3.0) return 0.0; else return x; #For the chip will report less than 3w power when no load is connected | |
| energy: | |
| name: "${friendly_name} Energy" | |
| unit_of_measurement: kWh | |
| filters: | |
| # Multiplication factor from W to kW is 0.001 | |
| - multiply: 0.001 | |
| - platform: total_daily_energy | |
| name: "${friendly_name} Total Daily Energy" | |
| restore: true | |
| power_id: power_sensor | |
| unit_of_measurement: kWh | |
| accuracy_decimals: 3 | |
| filters: | |
| - multiply: 0.001 | |
| button: | |
| - platform: restart | |
| id: restart_button | |
| name: "${friendly_name} Restart" | |
| switch: | |
| - platform: gpio | |
| name: "${friendly_name}" | |
| pin: GPIO12 | |
| id: relay | |
| restore_mode: ${relay_restore_mode} | |
| light: | |
| - platform: status_led | |
| name: "${friendly_name} Status LED" | |
| id: blue_led | |
| disabled_by_default: true | |
| pin: | |
| inverted: true | |
| number: GPIO13 | |
| text_sensor: | |
| - platform: wifi_info | |
| ip_address: | |
| name: "${friendly_name} IP Address" | |
| disabled_by_default: true | |
| time: | |
| - platform: sntp | |
| id: my_time |