Skip to content
This repository has been archived by the owner. It is now read-only.

Zwave devices not responding, motion alarm always on, etc... #2243

Closed
gajdur opened this Issue Feb 16, 2018 · 5 comments

Comments

Projects
None yet
5 participants
@gajdur
Copy link

commented Feb 16, 2018

Homey Version: 1.5.6 exp.
Log: 1119A932B3
Android
2.0 Preview

What did you try to achieve?
Almost all my zwave devices are unreachable, not all together and not always the same.
Fibaro Relais not responding, fibaro motion sensor with alarm always on, fibaro door sensors with tamper or not triggering/responding, neo coolcam motion not triggering and draining one battery per day, couple fibaro roller shutter 2 with venetians not going horisontal anymore when 2% dim.

What did you expect as result?
Nothing from the above

What was the result?
PTP not helping, must deactivate heimdall app, floor heating not working while relais and sensors not working.

Any other remarks
not atm

@pakacom

This comment has been minimized.

Copy link

commented Feb 17, 2018

I have the same problem as you have.
My zigbee motion sensors alarm are always on.
I must deactivate heimdall app also.
#2231

@bvdbos

This comment has been minimized.

Copy link

commented Feb 17, 2018

Is this related to the Heimdall-app? If not : could you look at https://developer.athom.com/tools and see what happens with your zwave-devices (are there many tx-errors, non-working routes etc). Could you heal your powered devices? What happens if you wake up a device (push button once probably...)

@gajdur

This comment has been minimized.

Copy link
Author

commented Feb 17, 2018

Heimdall is working, is zwave or 1.5.6 in general Problem. Reseting and readding not helping. Heal not working. Also with devices at 30cm from Homey.

@TonD83

This comment has been minimized.

Copy link

commented Feb 20, 2018

I have what appears to be the same or similar problem(s). Heal is not working for any nodes. Not even those very close and in line of sight. Adding NEO Coolcam plugs gives a lot of missing device classes, metering is not working only on/off. Re-adding a couple of times gives different results every time.

@jeroenvollenbrock

This comment has been minimized.

Copy link
Member

commented Feb 26, 2018

Closed to combine under #2267

Sign up for free to subscribe to this conversation on GitHub. Already have an account? Sign in.
You can’t perform that action at this time.