[?] Enter the name or absolute path of the firmware you want to analyse : DIR850LB1_FW210WWb03.bin
[?] Enter the brand of the firmware : dlink
[+] Now going to extract the firmware. Hold on..
[+] Firmware : DIR850LB1_FW210WWb03.bin
[+] Brand : dlink
[+] Database image ID : 2
[+] Identifying architecture
[+] Architecture : mipseb
[+] Storing filesystem in database
[+] Building QEMU disk image
[+] Setting up the network connection, please standby
[+] Network interfaces : []
[+] Running the firmware finally
[+] command line : sudo /fat/firmware-analysis-toolkit/firmadyne//scratch/2/run.sh
[*] Press ENTER to run the firmware...
Starting firmware emulation... use Ctrl-a + x to exit
aditya
[    0.000000] Linux version 2.6.32.70 (vagrant@vagrant-ubuntu-trusty-64) (gcc version 5.3.0 (GCC) ) #1 Thu Feb 18 01:39:21 UTC 2016
[    0.000000]
[    0.000000] LINUX started...
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 00019300 (MIPS 24Kc)
[    0.000000] FPU revision is: 00739300
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 00001000 @ 00000000 (reserved)
[    0.000000]  memory: 000ef000 @ 00001000 (ROM data)
[    0.000000]  memory: 0061e000 @ 000f0000 (reserved)
[    0.000000]  memory: 0f8f1000 @ 0070e000 (usable)
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] Wasting 57792 bytes for tracking 1806 unused pages
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x0000ffff
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x0000ffff
[    0.000000] On node 0 totalpages: 65535
[    0.000000] free_area_init_node: node 0, pgdat 806aa3c0, node_mem_map 81000000
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 480 pages used for memmap
[    0.000000]   Normal zone: 60959 pages, LIFO batch:15
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65023
[    0.000000] Kernel command line: root=/dev/sda1 console=ttyS0 nandsim.parts=64,64,64,64,64,64,64,64,64,64 rdinit=/firmadyne/preInit.sh rw debug ignore_loglevel print-fatal-signals=1 user_debug=31 firmadyne.syscall=0
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes.
[    0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 252428k/254916k available (4260k kernel code, 2252k reserved, 1549k data, 220k init, 0k highmem)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:256
[    0.000000] CPU frequency 200.00 MHz
[    0.000000] Console: colour dummy device 80x25
[    0.008000] Calibrating delay loop... 494.59 BogoMIPS (lpj=989184)
[    0.088000] Mount-cache hash table entries: 512
[    0.112000] NET: Registered protocol family 16
[    0.136000] bio: create slab <bio-0> at 0
[    0.140000] vgaarb: loaded
[    0.144000] SCSI subsystem initialized
[    0.148000] libata version 3.00 loaded.
[    0.148000] usbcore: registered new interface driver usbfs
[    0.152000] usbcore: registered new interface driver hub
[    0.152000] usbcore: registered new device driver usb
[    0.160000] pci 0000:00:00.0: reg 14 32bit mmio pref: [0x1000000-0x1ffffff]
[    0.160000] pci 0000:00:0a.1: reg 20 io port: [0x00-0x0f]
[    0.160000] pci 0000:00:0a.2: reg 20 io port: [0x00-0x1f]
[    0.164000] pci 0000:00:0a.3: BAR 8: address space collision on of bridge [0x1100-0x110f]
[    0.168000] pci 0000:00:0a.3: quirk: region 1100-110f claimed by PIIX4 SMB
[    0.168000] pci 0000:00:0b.0: reg 10 io port: [0x00-0x1f]
[    0.172000] pci 0000:00:0b.0: reg 14 32bit mmio: [0x000000-0x00001f]
[    0.176000] pci 0000:00:0b.0: reg 30 32bit mmio pref: [0x000000-0x03ffff]
[    0.180000] pci 0000:00:12.0: reg 10 io port: [0x00-0x1f]
[    0.180000] pci 0000:00:12.0: reg 14 32bit mmio: [0x000000-0x00001f]
[    0.180000] pci 0000:00:12.0: reg 30 32bit mmio pref: [0x000000-0x03ffff]
[    0.180000] pci 0000:00:13.0: reg 10 io port: [0x00-0x1f]
[    0.180000] pci 0000:00:13.0: reg 14 32bit mmio: [0x000000-0x00001f]
[    0.184000] pci 0000:00:13.0: reg 30 32bit mmio pref: [0x000000-0x03ffff]
[    0.188000] pci 0000:00:14.0: reg 10 io port: [0x00-0x1f]
[    0.192000] pci 0000:00:14.0: reg 14 32bit mmio: [0x000000-0x00001f]
[    0.192000] pci 0000:00:14.0: reg 30 32bit mmio pref: [0x000000-0x03ffff]
[    0.192000] pci 0000:00:15.0: reg 10 32bit mmio pref: [0x000000-0x1ffffff]
[    0.192000] pci 0000:00:15.0: reg 14 32bit mmio: [0x000000-0x000fff]
[    0.192000] pci 0000:00:15.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[    0.200000] vgaarb: device added: PCI:0000:00:15.0,decodes=io+mem,owns=none,locks=none
[    0.200000] pci 0000:00:0a.3: BAR 8: bogus alignment [0x1100-0x110f] flags 0x100
[    0.212000] cfg80211: Calling CRDA to update world regulatory domain
[    0.216000] Switching to clocksource MIPS
[    0.220000] Switched to NOHz mode on CPU #0
[    0.220000] NET: Registered protocol family 2
[    0.224000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.228000] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.228000] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[    0.228000] TCP: Hash tables configured (established 8192 bind 8192)
[    0.236000] TCP reno registered
[    0.244000] NET: Registered protocol family 1
[    0.252000] PCI: Enabling device 0000:00:0a.2 (0000 -> 0001)
[    0.296000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.300000] Registering unionfs 2.6 (for 2.6.32.63)
[    0.304000] JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.308000] ROMFS MTD (C) 2007 Red Hat, Inc.
[    0.308000] msgmni has been set to 493
[    0.344000] alg: No test for stdrng (krng)
[    0.452000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.460000] io scheduler noop registered
[    0.460000] io scheduler cfq registered (default)
[    0.460000] firmadyne: devfs: 1, execute: 1, procfs: 1, syscall: 0
[    0.464000] firmadyne: Cannot register character device: watchdog, 0xa, 0x82!
[    0.464000] firmadyne: Cannot register character device: wdt, 0xfd, 0x0!
[    0.616000] PCI: Enabling device 0000:00:15.0 (0000 -> 0002)
[    0.616000] cirrusfb 0000:00:15.0: Cirrus Logic chipset on PCI bus, RAM (4096 kB) at 0x10000000
[    0.852000] Console: switching to colour frame buffer device 80x30
[    0.900000] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.912000] serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.912000] console [ttyS0] enabled, bootconsole disabled
[    0.912000] console [ttyS0] enabled, bootconsole disabled
[    0.916000] serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.924000] brd: module loaded
[    0.928000] loop: module loaded
[    0.932000] ata_piix 0000:00:0a.1: version 2.13
[    0.932000] PCI: Enabling device 0000:00:0a.1 (0000 -> 0001)
[    0.936000] PCI: Setting latency timer of device 0000:00:0a.1 to 64
[    0.944000] scsi0 : ata_piix
[    0.948000] scsi1 : ata_piix
[    0.952000] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x10a0 irq 14
[    0.952000] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x10a8 irq 15
[    0.960000] NAND device: Manufacturer ID: 0x98, Chip ID: 0x39 (Toshiba NAND 128MiB 1,8V 8-bit)
[    0.968000] flash size: 128 MiB
[    0.968000] page size: 512 bytes
[    0.968000] OOB area size: 16 bytes
[    0.968000] sector size: 16 KiB
[    0.968000] pages number: 262144
[    0.968000] pages per sector: 32
[    0.968000] bus width: 8
[    0.968000] bits in sector size: 14
[    0.976000] bits in page size: 9
[    0.976000] bits in OOB size: 4
[    0.976000] flash size with OOB: 135168 KiB
[    0.980000] page address bytes: 4
[    0.980000] sector address bytes: 3
[    0.980000] options: 0x62
[    0.996000] Scanning device for bad blocks
[    1.176000] Creating 11 MTD partitions on "NAND 128MiB 1,8V 8-bit":
[    1.176000] 0x000000000000-0x000000100000 : "NAND simulator partition 0"
[    1.192000] 0x000000100000-0x000000200000 : "NAND simulator partition 1"
[    1.192000] 0x000000200000-0x000000300000 : "NAND simulator partition 2"
[    1.196000] 0x000000300000-0x000000400000 : "NAND simulator partition 3"
[    1.196000] 0x000000400000-0x000000500000 : "NAND simulator partition 4"
[    1.196000] 0x000000500000-0x000000600000 : "NAND simulator partition 5"
[    1.200000] 0x000000600000-0x000000700000 : "NAND simulator partition 6"
[    1.200000] 0x000000700000-0x000000800000 : "NAND simulator partition 7"
[    1.200000] 0x000000800000-0x000000900000 : "NAND simulator partition 8"
[    1.212000] 0x000000900000-0x000000a00000 : "NAND simulator partition 9"
[    1.216000] 0x000000a00000-0x000008000000 : "NAND simulator partition 10"
[    1.220000] Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
[    1.220000] Copyright (c) 1999-2006 Intel Corporation.
[    1.220000] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[    1.224000] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[    1.224000] pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
[    1.224000] PCI: Enabling device 0000:00:0b.0 (0000 -> 0003)
[    1.228000] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[    1.228000] pcnet32: PCnet/PCI II 79C970A at 0x1020, 52:54:00:12:34:56 assigned IRQ 10.
[    1.232000] eth0: registered as PCnet/PCI II 79C970A
[    1.232000] PCI: Enabling device 0000:00:12.0 (0000 -> 0003)
[    1.236000] PCI: Setting latency timer of device 0000:00:12.0 to 64
[    1.236000] pcnet32: PCnet/PCI II 79C970A at 0x1040, 52:54:00:12:34:57 assigned IRQ 10.
[    1.240000] eth1: registered as PCnet/PCI II 79C970A
[    1.240000] PCI: Enabling device 0000:00:13.0 (0000 -> 0003)
[    1.248000] PCI: Setting latency timer of device 0000:00:13.0 to 64
[    1.248000] pcnet32: PCnet/PCI II 79C970A at 0x1060, 52:54:00:12:34:58 assigned IRQ 10.
[    1.252000] eth2: registered as PCnet/PCI II 79C970A
[    1.252000] PCI: Enabling device 0000:00:14.0 (0000 -> 0003)
[    1.256000] PCI: Setting latency timer of device 0000:00:14.0 to 64
[    1.256000] pcnet32: PCnet/PCI II 79C970A at 0x1080, 52:54:00:12:34:59 assigned IRQ 11.
[    1.260000] eth3: registered as PCnet/PCI II 79C970A
[    1.260000] pcnet32: 4 cards_found.
[    1.268000] PPP generic driver version 2.4.2
[    1.268000] PPP Deflate Compression module registered
[    1.280000] ata1.01: NODEV after polling detection
[    1.292000] ata2.01: NODEV after polling detection
[    1.296000] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    1.296000] ata1.00: ATA-7: QEMU HARDDISK, 2.5+, max UDMA/100
[    1.300000] ata1.00: 2097152 sectors, multi 16: LBA48
[    1.300000] ata2.00: configured for UDMA/33
[    1.304000] ata1.00: configured for UDMA/33
[    1.324000] scsi 0:0:0:0: Direct-Access     ATA      QEMU HARDDISK    2.5+ PQ: 0 ANSI: 5
[    1.340000] sd 0:0:0:0: [sda] 2097152 512-byte logical blocks: (1.07 GB/1.00 GiB)
[    1.344000] scsi 1:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    1.348000] sd 0:0:0:0: [sda] Write Protect is off
[    1.348000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.348000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.356000]  sda: sda1
[    1.384000] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.392000] PPP MPPE Compression module registered
[    1.392000] NET: Registered protocol family 24
[    1.392000] PPPoL2TP kernel driver, V1.0
[    1.392000] tun: Universal TUN/TAP device driver, 1.6
[    1.396000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.396000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.396000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.400000] uhci_hcd: USB Universal Host Controller Interface driver
[    1.400000] PCI: Setting latency timer of device 0000:00:0a.2 to 64
[    1.404000] uhci_hcd 0000:00:0a.2: UHCI Host Controller
[    1.408000] uhci_hcd 0000:00:0a.2: new USB bus registered, assigned bus number 1
[    1.412000] uhci_hcd 0000:00:0a.2: irq 11, io base 0x00001000
[    1.420000] usb usb1: configuration #1 chosen from 1 choice
[    1.424000] hub 1-0:1.0: USB hub found
[    1.428000] hub 1-0:1.0: 2 ports detected
[    1.432000] Initializing USB Mass Storage driver...
[    1.436000] usbcore: registered new interface driver usb-storage
[    1.436000] USB Mass Storage support registered.
[    1.440000] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.440000] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.444000] mice: PS/2 mouse device common for all mice
[    1.464000] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    1.472000] rtc0: alarms up to one day, 242 bytes nvram
[    1.472000] i2c /dev entries driver
[    1.472000] piix4_smbus 0000:00:0a.3: SMBus Host Controller at 0x1100, revision 0
[    1.476000] sdhci: Secure Digital Host Controller Interface driver
[    1.476000] sdhci: Copyright(c) Pierre Ossman
[    1.480000] usbcore: registered new interface driver hiddev
[    1.484000] usbcore: registered new interface driver usbhid
[    1.492000] usbhid: v2.6:USB HID core driver
[    1.492000] Netfilter messages via NETLINK v0.30.
[    1.492000] nf_conntrack version 0.5.0 (3947 buckets, 15788 max)
[    1.496000] ctnetlink v0.93: registering with nfnetlink.
[    1.500000] IPv4 over IPv4 tunneling driver
[    1.504000] GRE over IPv4 tunneling driver
[    1.508000] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.508000] arp_tables: (C) 2002 David S. Miller
[    1.508000] TCP cubic registered
[    1.508000] Initializing XFRM netlink socket
[    1.508000] NET: Registered protocol family 10
[    1.532000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    1.540000] IPv6 over IPv4 tunneling driver
[    1.544000] NET: Registered protocol family 17
[    1.552000] Bridge firewalling registered
[    1.552000] Ebtables v2.0 registered
[    1.556000] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
[    1.556000] All bugs added by David S. Miller <davem@redhat.com>
[    1.560000] lib80211: common routines for IEEE802.11 drivers
[    1.560000] lib80211_crypt: registered algorithm 'NULL'
[    1.572000] rtc_cmos rtc_cmos: setting system clock to 2018-11-16 08:05:17 UTC (1542355517)
[    1.588000] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.800000] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input1
[    1.880000] UDF-fs: No partition found (1)
[    1.880000] List of all partitions:
[    1.880000] 1f00            1024 mtdblock0 (driver?)
[    1.880000] 1f01            1024 mtdblock1 (driver?)
[    1.880000] 1f02            1024 mtdblock2 (driver?)
[    1.880000] 1f03            1024 mtdblock3 (driver?)
[    1.880000] 1f04            1024 mtdblock4 (driver?)
[    1.880000] 1f05            1024 mtdblock5 (driver?)
[    1.880000] 1f06            1024 mtdblock6 (driver?)
[    1.880000] 1f07            1024 mtdblock7 (driver?)
[    1.880000] 1f08            1024 mtdblock8 (driver?)
[    1.880000] 1f09            1024 mtdblock9 (driver?)
[    1.880000] 1f0a          120832 mtdblock10 (driver?)
[    1.880000] 0800         1048576 sda driver: sd
[    1.880000]   0801         1047552 sda1
[    1.880000] No filesystem could mount root, tried:  ext3 ext2 ext4 cramfs squashfs vfat iso9660 romfs udf
[    1.880000] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(8,1)