This repository was archived by the owner on Feb 25, 2024. It is now read-only.
Dashboard disable mode for updating M365 firmware #50
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
If you power on the scooter with the brake and throttle engaged, the dashboard is disabled and the TX/RX pins go to hi impedance state. By this way you can update de M365 firmware without disconnecting the dashboard. A new power cycle reset this status.
Contributor
|
@augisbud Looks like terrible hack but it really works ;) However it's hard to guess how someone is going to do that. One hand at brake lever, another holding the throttle.. The button to be pressed with a tongue? 😛 |
Contributor
Author
|
LOL, i do it in 15min before going to work, so may have some grammatical errors and not very optimized code, but it works... About the you need "three hands" i prefer this way instead use only one hand, but don´t worry you can turn on the scooter and then engage the brake and throttle, you have some seconds before the LCD logo comes out for entering in this mode. Description updated ;) |
Closed
villamany
commented
Apr 30, 2019
Sign up for free
to subscribe to this conversation on GitHub.
Already have an account?
Sign in.
3 participants
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Turn on the scooter and immediately engage and hold the throttle and brake before the logo disappears from the dashboard LCD. You will enter on dashboard disabled mode.
The Arduino TX/RX pins will go to hi impedance state leaving the communication BUS free.
By this way you can update de M365 firmware without disconnecting the dashboard or any cable.
A new power cycle will reset the dashboard to normal mode.
