External hard drive problem

[f5Qz]

I just got my ROCK 64 with the jessie-openmediavault-rock64-0.6.25-193-arm64.img image from https://github.com/ayufan-rock64/linux-build/releases/tag/0.6.25

But the external hard (http://en.sharkoon.com/product/1685/10394#specs) drive isnt recognized.

What is going on? The hard drive works fine with Openmediavault on raspberry pi & OdroidXU4.

Also tried it with the jessie-openmediavault-rock64-0.6.25-193-armhf.img image.

EDIT: On USB3.0 port

root@rock64:~# sudo fdisk -l

Disk /dev/ram0: 4 MiB, 4194304 bytes, 8192 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/mtdblock0: 4 MiB, 4161536 bytes, 8128 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/mtdblock1: 256 KiB, 262144 bytes, 512 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
GPT PMBR size mismatch (4458495 != 15359999) will be corrected by w(rite).

Disk /dev/mmcblk1: 7.3 GiB, 7864320000 bytes, 15360000 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 824DA7D1-B7E7-49CA-A273-69A1E8B9785F

Device          Start      End  Sectors  Size Type
/dev/mmcblk1p1     64     8063     8000  3.9M Linux filesystem
/dev/mmcblk1p2   8064     8191      128   64K Linux filesystem
/dev/mmcblk1p3   8192    16383     8192    4M Linux filesystem
/dev/mmcblk1p4  16384    24575     8192    4M Linux filesystem
/dev/mmcblk1p5  24576    32767     8192    4M Linux filesystem
/dev/mmcblk1p6  32768   262143   229376  112M Microsoft basic data
/dev/mmcblk1p7 262144 15359966 15097823  7.2G Linux filesystem

At around 900 seconds I powered off and on the HD...

root@rock64:~# dmesg | grep usb
[    0.614193] usbcore: registered new interface driver usbfs
[    0.614793] usbcore: registered new interface driver hub
[    0.615433] usbcore: registered new device driver usb
[    1.161801] phy phy-ff450000.syscon:usb2-phy@100.0: Looking up phy-supply from device tree
[    1.161918] vcc_host1_5v: could not add device link phy-ff450000.syscon:usb2-phy@100.0 err -2
[    1.162519] phy phy-ff450000.syscon:usb2-phy@100.1: Looking up phy-supply from device tree
[    1.162629] vcc_host1_5v: could not add device link phy-ff450000.syscon:usb2-phy@100.1 err -2
[    1.163102] rockchip-usb2phy ff450000.syscon:usb2-phy@100: GPIO lookup for consumer otg-vbus
[    1.163120] rockchip-usb2phy ff450000.syscon:usb2-phy@100: using device tree for GPIO lookup
[    1.163139] of_get_named_gpiod_flags: can't parse 'otg-vbus-gpios' property of node '/syscon@ff450000/usb2-phy@100[0]'
[    1.163155] of_get_named_gpiod_flags: can't parse 'otg-vbus-gpio' property of node '/syscon@ff450000/usb2-phy@100[0]'
[    1.163171] rockchip-usb2phy ff450000.syscon:usb2-phy@100: using lookup tables for GPIO lookup
[    1.163186] rockchip-usb2phy ff450000.syscon:usb2-phy@100: lookup for GPIO otg-vbus failed
[    1.163201] rockchip-usb2phy ff450000.syscon:usb2-phy@100: vbus_drv is not assigned
[    1.164774] rockchip-u3phy ff470000.usb3-phy: GPIO lookup for consumer vbus-drv
[    1.164793] rockchip-u3phy ff470000.usb3-phy: using device tree for GPIO lookup
[    1.164811] of_get_named_gpiod_flags: can't parse 'vbus-drv-gpios' property of node '/usb3-phy@ff470000[0]'
[    1.164829] of_get_named_gpiod_flags: can't parse 'vbus-drv-gpio' property of node '/usb3-phy@ff470000[0]'
[    1.164843] rockchip-u3phy ff470000.usb3-phy: using lookup tables for GPIO lookup
[    1.164858] rockchip-u3phy ff470000.usb3-phy: lookup for GPIO vbus-drv failed
[    1.164872] rockchip-u3phy ff470000.usb3-phy: vbus_drv is not assigned
[    1.165945] phy phy-ff470000.usb3-phy.2: Looking up phy-supply from device tree
[    1.165965] phy phy-ff470000.usb3-phy.2: Looking up phy-supply property in node /usb3-phy@ff470000/utmi@ff470000 failed
[    1.166405] phy phy-ff470000.usb3-phy.3: Looking up phy-supply from device tree
[    1.166427] phy phy-ff470000.usb3-phy.3: Looking up phy-supply property in node /usb3-phy@ff470000/pipe@ff478000 failed
[    1.168184] rockchip-u3phy ff470000.usb3-phy: Rockchip u3phy initialized successfully
[    1.601869] usbcore: registered new interface driver udl
[    2.252837] usbcore: registered new interface driver cdc_ether
[    2.252900] usbcore: registered new interface driver rndis_host
[    2.255119] phy phy-ff470000.usb3-phy.2: u3phy u2 power on
[    2.255145] phy phy-ff470000.usb3-phy.3: u3phy u3 power on
[    2.256290] dwc2 ff580000.usb: Looking up vusb_d-supply from device tree
[    2.256303] dwc2 ff580000.usb: Looking up vusb_d-supply property in node /usb@ff580000 failed
[    2.256318] ff580000.usb supply vusb_d not found, using dummy regulator
[    2.256418] dwc2 ff580000.usb: Looking up vusb_a-supply from device tree
[    2.256429] dwc2 ff580000.usb: Looking up vusb_a-supply property in node /usb@ff580000 failed
[    2.256438] ff580000.usb supply vusb_a not found, using dummy regulator
[    2.269039] dwc2 ff580000.usb: DWC OTG Controller
[    2.269106] dwc2 ff580000.usb: new USB bus registered, assigned bus number 1
[    2.269153] dwc2 ff580000.usb: irq 43, io mem 0xff580000
[    2.269451] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.269461] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.269469] usb usb1: Product: DWC OTG Controller
[    2.269477] usb usb1: Manufacturer: Linux 4.4.114-rockchip-ayufan-193 dwc2_hsotg
[    2.269485] usb usb1: SerialNumber: ff580000.usb
[    2.339882] ehci-platform ff5c0000.usb: EHCI Host Controller
[    2.340258] ehci-platform ff5c0000.usb: new USB bus registered, assigned bus number 2
[    2.340412] ehci-platform ff5c0000.usb: irq 44, io mem 0xff5c0000
[    2.346124] ehci-platform ff5c0000.usb: USB 2.0 started, EHCI 1.00
[    2.346421] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.346432] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.346440] usb usb2: Product: EHCI Host Controller
[    2.346448] usb usb2: Manufacturer: Linux 4.4.114-rockchip-ayufan-193 ehci_hcd
[    2.346455] usb usb2: SerialNumber: ff5c0000.usb
[    2.348661] ohci-platform ff5d0000.usb: Generic Platform OHCI controller
[    2.348982] ohci-platform ff5d0000.usb: new USB bus registered, assigned bus number 3
[    2.349160] ohci-platform ff5d0000.usb: irq 45, io mem 0xff5d0000
[    2.404377] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    2.404387] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.404395] usb usb3: Product: Generic Platform OHCI controller
[    2.404404] usb usb3: Manufacturer: Linux 4.4.114-rockchip-ayufan-193 ohci_hcd
[    2.404411] usb usb3: SerialNumber: ff5d0000.usb
[    2.407569] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    2.407579] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.407587] usb usb4: Product: xHCI Host Controller
[    2.407595] usb usb4: Manufacturer: Linux 4.4.114-rockchip-ayufan-193 xhci-hcd
[    2.407603] usb usb4: SerialNumber: xhci-hcd.9.auto
[    2.409479] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.409661] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003
[    2.409672] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.409680] usb usb5: Product: xHCI Host Controller
[    2.409688] usb usb5: Manufacturer: Linux 4.4.114-rockchip-ayufan-193 xhci-hcd
[    2.409696] usb usb5: SerialNumber: xhci-hcd.9.auto
[    2.412820] usbcore: registered new interface driver iforce
[    2.412930] usbcore: registered new interface driver xpad
[    2.413499] usbcore: registered new interface driver usbtouchscreen
[    2.460412] usbcore: registered new interface driver uvcvideo
[    2.467045] usbcore: registered new interface driver bfusb
[    2.467181] usbcore: registered new interface driver btusb
[    2.519667] of_get_named_gpiod_flags: parsed 'gpios' property of node '/switches/usb-switch[0]' - status (0)
[    2.520720] usbcore: registered new interface driver usbhid
[    2.520723] usbhid: USB HID core driver
[    2.523452] usbcore: registered new interface driver snd-usb-audio
[   13.435160] usb 5-1: device not accepting address 2, error -62
[   24.283144] usb 5-1: device not accepting address 3, error -62
[   24.320263] usb usb5-port1: attempt power cycle
[   25.360147] usb usb5-port1: cannot disable (err = -32)
[   25.394161] usb usb5-port1: cannot disable (err = -32)
[  889.555166] usb 5-1: device not accepting address 5, error -62
[  900.419178] usb 5-1: device not accepting address 6, error -62
[  900.464160] usb usb5-port1: attempt power cycle
[  901.502224] usb usb5-port1: cannot disable (err = -32)
[  901.549246] usb usb5-port1: cannot disable (err = -32)

[LargePrime]

https://forum.pine64.org/showthread.php?tid=4925

[shortyishere]

Have same problem.

[pfeerick]

a dmesg | grep usb won't show enough info, as a bunch of the messages don't mention USB. Better to do a dmesg -w or dmesg -wH and then plug in the drive, and then capture all the messages shown then.

For example, this is what I get when plugged into the USB3 port (just note it is a v1 rock64, with a fault in the USB3 line, so may have 'non-standard' errors/messages) when running 0.6.25 armhf OMV 3 with a USB powered Samsung M3 USB3 hard drive:

[ 4082.470709] xhci-hcd xhci-hcd.9.auto: Cannot set link state.
[ 4082.470709] xhci-hcd xhci-hcd.9.auto: Cannot set link state.
[ 4082.475721] usb usb5-port1: cannot disable (err = -32)
[ 4082.475721] usb usb5-port1: cannot disable (err = -32)
[ 4082.891658] usb usb4-port1: Cannot enable. Maybe the USB cable is bad?
[ 4082.891658] usb usb4-port1: Cannot enable. Maybe the USB cable is bad?
[ 4083.249674] usb 4-1: new high-speed USB device number 5 using xhci-hcd
[ 4083.249674] usb 4-1: new high-speed USB device number 5 using xhci-hcd
[ 4083.377932] usb 4-1: New USB device found, idVendor=04e8, idProduct=61b6
[ 4083.390815] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4083.403720] usb 4-1: Product: Samsung M3 Portable
[ 4083.377932] usb 4-1: New USB device found, idVendor=04e8, idProduct=61b6
[ 4083.390815] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4083.403720] usb 4-1: Product: Samsung M3 Portable
[ 4083.416276] usb 4-1: Manufacturer: Samsung M3 Portable
[ 4083.428825] usb 4-1: SerialNumber: 91E27DDC1200012F
[ 4083.416276] usb 4-1: Manufacturer: Samsung M3 Portable
[ 4083.428825] usb 4-1: SerialNumber: 91E27DDC1200012F
[ 4083.436707] usb-storage 4-1:1.0: USB Mass Storage device detected
[ 4083.436707] usb-storage 4-1:1.0: USB Mass Storage device detected
[ 4083.442461] scsi host2: usb-storage 4-1:1.0
[ 4083.442461] scsi host2: usb-storage 4-1:1.0
[ 4083.974809] xhci-hcd xhci-hcd.9.auto: Cannot set link state.
[ 4083.974809] xhci-hcd xhci-hcd.9.auto: Cannot set link state.
[ 4083.979872] usb usb5-port1: cannot disable (err = -32)
[ 4083.979872] usb usb5-port1: cannot disable (err = -32)
[ 4084.448244] scsi 2:0:0:0: Direct-Access     Samsung  M3 Portable      1301 PQ: 0 ANSI: 6
[ 4084.448244] scsi 2:0:0:0: Direct-Access     Samsung  M3 Portable      1301 PQ: 0 ANSI: 6
[ 4084.455268] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 4084.455268] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 4084.462091] sd 2:0:0:0: [sda] Write Protect is off
[ 4084.462091] sd 2:0:0:0: [sda] Write Protect is off
[ 4084.4664[ 4084.466931] sd 2:0:0:0: [sda] No Caching mode page found
16] sd 2:0:0:0: [sda] Mode Sense: 33 00 00 08
[ 4084.466931] sd 2:0:0:0: [sda] No Caching mode page found
[ 4084.471750] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 4084.471750] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 4084.769176]  sda: sda1
[ 4084.769176]  sda: sda1
[ 4084.776482] sd 2:0:0:0: [sda] Attached SCSI disk
[ 4084.776482] sd 2:0:0:0: [sda] Attached SCSI disk

My problem here though is that although it is visible in OMV as a device, and is mounted (although it is a NTFS drive), it won't list when I try to create a shared folder against it. I'll have to try on another drive, ext4 formatted, just incase that is the real issue in my case.

[pfeerick]

Maybe an even more insidious error than I thought... a USB3 flash drive with a NTFS filesystem also mounted fine, but actually showed up in the devices list when I went to create the shared folder!! WTF? 😕

Whoops: I had said an hour ago that it was no different when I just nuked the Samsung HDD and re-formatted it as ext4 in OMV... it did all the work of making the new file system and it still doesn't appear in the 'devices' drop down... but that was wrong... I just realised before pulling the plug on the drive that it wasn't mounted. I mounted it and it now appears in the devices list. 😮

[f5Qz]

Power-on ExternalHD on USB3.0 port after reboot.

Im not sure which specified hardware version I have. I ordered it mid February, so it should be a fairly recent model.

root@rock64:~# dmesg -wH
[Mar22 16:16] Booting Linux on physical CPU 0x0
[  +0.000000] Initializing cgroup subsys cpuset
[  +0.000000] Initializing cgroup subsys cpu
[  +0.000000] Initializing cgroup subsys cpuacct
[  +0.000000] Linux version 4.4.77-rockchip-ayufan-136 (root@713b8312374e) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.4) ) #1 SMP Thu Oct 12 09:14:48 UTC 2017
[  +0.000000] Boot CPU: AArch64 Processor [410fd034]
[  +0.000000] earlycon: Early serial console at MMIO32 0xff130000 (options '')
[  +0.000000] bootconsole [uart0] enabled
[  +0.000000] On node 0 totalpages: 523776
[  +0.000000]   DMA zone: 8184 pages used for memmap
[  +0.000000]   DMA zone: 0 pages reserved
[  +0.000000]   DMA zone: 523776 pages, LIFO batch:31
[  +0.000000] psci: probing for conduit method from DT.
[  +0.000000] psci: PSCIv1.0 detected in firmware.
[  +0.000000] psci: Using standard PSCI v0.2 function IDs
[  +0.000000] psci: MIGRATE_INFO_TYPE not supported.
[  +0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc07ff4e000 s46504 r8192 d31320 u86016
[  +0.000000] pcpu-alloc: s46504 r8192 d31320 u86016 alloc=21*4096
[  +0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[  +0.000000] Detected VIPT I-cache on CPU0
[  +0.000000] CPU features: enabling workaround for ARM erratum 845719
[  +0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 515592
[  +0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff130000 rw root=LABEL=linux-root rootwait rootfstype=ext4 init=/sbin/init coherent_pool=1M ethaddr=1e:c5:ec:5c:8f:fa eth1addr=1e:c5:ec:5c:8f:1a serial=87d9cb75058e39e
[  +0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[  +0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[  +0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[  +0.000000] software IO TLB [mem 0x79400000-0x7d400000] (64MB) mapped at [ffffffc079400000-ffffffc07d3fffff]
[  +0.000000] Memory: 1969420K/2095104K available (11390K kernel code, 1466K rwdata, 4124K rodata, 1152K init, 747K bss, 125684K reserved, 0K cma-reserved)
[  +0.000000] Virtual kernel memory layout:
    modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
    vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000   (   246 GB)
      .init : 0xffffff8008fb0000 - 0xffffff80090d0000   (  1152 KB)
      .text : 0xffffff8008080000 - 0xffffff8008ba0000   ( 11392 KB)
    .rodata : 0xffffff8008ba0000 - 0xffffff8008fb0000   (  4160 KB)
      .data : 0xffffff80090d0000 - 0xffffff800923e808   (  1467 KB)
    vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8 GB maximum)
              0xffffffbdc0008000 - 0xffffffbdc2000000   (    31 MB actual)
    fixed   : 0xffffffbffe7fd000 - 0xffffffbffec00000   (  4108 KB)
    PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000   (    16 MB)
    memory  : 0xffffffc000200000 - 0xffffffc080000000   (  2046 MB)
[  +0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[  +0.000000] Hierarchical RCU implementation.
[  +0.000000]   Build-time adjustment of leaf fanout to 64.
[  +0.000000]   RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[  +0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[  +0.000000] NR_IRQS:64 nr_irqs:64 0
[  +0.000000] GIC: Using split EOI/Deactivate mode
[  +0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[  +0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[  +0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[  +0.001582] Console: colour dummy device 80x25
[  +0.000410] console [tty0] enabled
[  +0.000323] bootconsole [uart0] disabled
[  +0.000397] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
[  +0.000037] pid_max: default: 32768 minimum: 301
[  +0.000139] Security Framework initialized
[  +0.000021] Yama: becoming mindful.
[  +0.000034] AppArmor: AppArmor disabled by boot time parameter
[  +0.000084] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[  +0.000028] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[  +0.000863] Initializing cgroup subsys io
[  +0.000034] Initializing cgroup subsys memory
[  +0.000048] Initializing cgroup subsys devices
[  +0.000027] Initializing cgroup subsys freezer
[  +0.000025] Initializing cgroup subsys net_cls
[  +0.000025] Initializing cgroup subsys perf_event
[  +0.000026] Initializing cgroup subsys net_prio
[  +0.000032] Initializing cgroup subsys hugetlb
[  +0.000022] Initializing cgroup subsys pids
[  +0.000062] ftrace: allocating 42863 entries in 168 pages
[  +0.117556] sched-energy: CPU device node has no sched-energy-costs
[  +0.000037] Invalid sched_group_energy for CPU0
[  +0.000017] CPU0: update cpu_capacity 1024
[  +0.000068] ASID allocator initialised with 65536 entries
[  +0.005314] Detected VIPT I-cache on CPU1
[  +0.000057] Invalid sched_group_energy for CPU1
[  +0.000005] CPU1: update cpu_capacity 1024
[  +0.000005] CPU1: Booted secondary processor [410fd034]
[  +0.000787] Detected VIPT I-cache on CPU2
[  +0.000047] Invalid sched_group_energy for CPU2
[  +0.000005] CPU2: update cpu_capacity 1024
[  +0.000004] CPU2: Booted secondary processor [410fd034]
[  +0.000750] Detected VIPT I-cache on CPU3
[  +0.000044] Invalid sched_group_energy for CPU3
[  +0.000006] CPU3: update cpu_capacity 1024
[  +0.000004] CPU3: Booted secondary processor [410fd034]
[  +0.000130] Brought up 4 CPUs
[  +0.000296] SMP: Total of 4 processors activated.
[  +0.000036] CPU: All CPU(s) started at EL2
[  +0.000061] alternatives: patching kernel code
[  +0.000254] Invalid sched_group_energy for CPU3
[  +0.000032] Invalid sched_group_energy for Cluster3
[  +0.000029] Invalid sched_group_energy for CPU2
[  +0.000027] Invalid sched_group_energy for Cluster2
[  +0.000027] Invalid sched_group_energy for CPU1
[  +0.000028] Invalid sched_group_energy for Cluster1
[  +0.000054] Invalid sched_group_energy for CPU0
[  +0.000029] Invalid sched_group_energy for Cluster0
[  +0.000724] devtmpfs: initialized
[  +0.016639] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[  +0.000078] futex hash table entries: 1024 (order: 4, 65536 bytes)
[  +0.000645] xor: measuring software checksum speed
[  +0.009269]    8regs     :  1080.000 MB/sec
[  +0.010093]    8regs_prefetch:   968.000 MB/sec
[  +0.010096]    32regs    :  1352.000 MB/sec
[  +0.010096]    32regs_prefetch:  1116.000 MB/sec
[  +0.000031] xor: using function: 32regs (1352.000 MB/sec)
[  +0.000081] pinctrl core: initialized pinctrl subsystem
[  +0.000407] regulator-dummy: no parameters
[  +0.000917] NET: Registered protocol family 16
[  +0.003674] cpuidle: using governor ladder
[  +0.004034] cpuidle: using governor menu
[  +0.000050] Registered FIQ tty driver
[  +0.000462] vdso: 2 pages (1 code @ ffffff8008ba6000, 1 data @ ffffff80090d4000)
[  +0.000076] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[  +0.000503] DMA: preallocated 1024 KiB pool for atomic allocations
[  +0.013859] gpiochip_add: registered GPIOs 0 to 31 on device: gpio0
[  +0.000142] gpiochip_add: registered GPIOs 32 to 63 on device: gpio1
[  +0.000129] gpiochip_add: registered GPIOs 64 to 95 on device: gpio2
[  +0.000163] gpiochip_add: registered GPIOs 96 to 127 on device: gpio3
[  +0.009518] genirq: Setting trigger mode 8 for irq 176 failed (gic_set_type+0x0/0x68)
[  +0.058597] console [ttyFIQ0] enabled
[  +0.000669] Registered fiq debugger ttyFIQ0
[  +0.034965] raid6: int64x1  gen()   187 MB/s
[  +0.017185] raid6: int64x1  xor()   181 MB/s
[  +0.017193] raid6: int64x2  gen()   292 MB/s
[  +0.017227] raid6: int64x2  xor()   275 MB/s
[  +0.017226] raid6: int64x4  gen()   468 MB/s
[  +0.017137] raid6: int64x4  xor()   337 MB/s
[  +0.017300] raid6: int64x8  gen()   332 MB/s
[  +0.017036] raid6: int64x8  xor()   265 MB/s
[  +0.017208] raid6: neonx1   gen()   359 MB/s
[  +0.017187] raid6: neonx1   xor()   363 MB/s
[  +0.017208] raid6: neonx2   gen()   562 MB/s
[  +0.017217] raid6: neonx2   xor()   488 MB/s
[  +0.017228] raid6: neonx4   gen()   757 MB/s
[  +0.017156] raid6: neonx4   xor()   574 MB/s
[  +0.017190] raid6: neonx8   gen()   773 MB/s
[  +0.017208] raid6: neonx8   xor()   576 MB/s
[  +0.000401] raid6: using algorithm neonx8 gen() 773 MB/s
[  +0.000490] raid6: .... xor() 576 MB/s, rmw enabled
[  +0.000470] raid6: using intx1 recovery algorithm
[  +0.000917] mpp venc_srv: mpp_probe enter
[  +0.000438] mpp venc_srv: init success
[  +0.001021] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc-phy-regulator[0]'
[  +0.000037] vcc_phy: no parameters
[  +0.000236] reg-fixed-voltage vcc-phy-regulator: vcc_phy supplying 0uV
[  +0.000265] of_get_named_gpiod_flags: parsed 'gpio' property of node '/sdmmc-regulator[0]' - status (0)
[  +0.000065] reg-fixed-voltage sdmmc-regulator: Looking up vin-supply from device tree
[  +0.000022] vcc_sd: unable to resolve supply
[  +0.000015] vcc_sd: 3300 mV
[  +0.000228] reg-fixed-voltage sdmmc-regulator: Looking up vin-supply from device tree
[  +0.000021] vcc_sd: unable to resolve supply
[  +0.000018] reg-fixed-voltage sdmmc-regulator: vcc_sd supplying 3300000uV
[  +0.000124] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc-sys[0]'
[  +0.000035] vcc_sys: 5000 mV
[  +0.000204] reg-fixed-voltage sdmmc-regulator: Looking up vin-supply from device tree
[  +0.000021] vcc_sd: unable to resolve supply
[  +0.000016] reg-fixed-voltage vcc-sys: vcc_sys supplying 5000000uV
[  +0.000627] iommu: Adding device ff350000.vpu-service to group 0
[  +0.000691] iommu: Adding device ff360000.rkvdec to group 1
[  +0.000593] iommu: Adding device ff330000.h265e to group 2
[  +0.000607] iommu: Adding device ff340000.vepu to group 3
[  +0.000578] iommu: Adding device ff370000.vop to group 4
[  +0.001426] rk_iommu ff360480.iommu: can't get aclk
[  +0.000510] rk_iommu ff360480.iommu: can't get hclk
[  +0.000628] rk_iommu ff330200.iommu: can't get aclk
[  +0.000489] rk_iommu ff330200.iommu: can't get hclk
[  +0.000814] rk_iommu ff373f00.iommu: can't get aclk
[  +0.000486] rk_iommu ff373f00.iommu: can't get hclk
[  +0.001086] SCSI subsystem initialized
[  +0.000662] usbcore: registered new interface driver usbfs
[  +0.000605] usbcore: registered new interface driver hub
[  +0.000607] usbcore: registered new device driver usb
[  +0.000600] media: Linux media interface: v0.10
[  +0.000487] Linux video capture interface: v2.00
[  +0.000552] pps_core: LinuxPPS API ver. 1 registered
[  +0.000468] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[  +0.000972] PTP clock support registered
[  +0.002038] Advanced Linux Sound Architecture Driver Initialized.
[  +0.001440] Bluetooth: Core ver 2.21
[  +0.000420] NET: Registered protocol family 31
[  +0.000445] Bluetooth: HCI device and connection manager initialized
[  +0.000596] Bluetooth: HCI socket layer initialized
[  +0.000480] Bluetooth: L2CAP socket layer initialized
[  +0.000502] Bluetooth: SCO socket layer initialized
[  +0.001178] NetLabel: Initializing
[  +0.000361] NetLabel:  domain hash size = 128
[  +0.000409] NetLabel:  protocols = UNLABELED CIPSOv4
[  +0.000533] NetLabel:  unlabeled traffic allowed by default
[  +0.000986] rockchip-cpuinfo cpuinfo: Serial          : 87d9cb75058e39e1
[  +0.001356] clocksource: Switched to clocksource arch_sys_counter
[  +0.100220] NET: Registered protocol family 2
[  +0.001285] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[  +0.000921] TCP bind hash table entries: 16384 (order: 7, 524288 bytes)
[  +0.001378] TCP: Hash tables configured (established 16384 bind 16384)
[  +0.000750] UDP hash table entries: 1024 (order: 4, 98304 bytes)
[  +0.000722] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes)
[  +0.001039] NET: Registered protocol family 1
[  +0.000918] RPC: Registered named UNIX socket transport module.
[  +0.000557] RPC: Registered udp transport module.
[  +0.000467] RPC: Registered tcp transport module.
[  +0.000445] RPC: Registered tcp NFSv4.1 backchannel transport module.
[  +0.000629] PCI: CLS 0 bytes, default 64
[  +0.000282] Trying to unpack rootfs image as initramfs...
[  +0.329296] Freeing initrd memory: 4156K (ffffffc07db0b000 - ffffffc07df1a000)
[  +0.001504] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[  +0.001984] kvm [1]: 8-bit VMID
[  +0.000315] kvm [1]: Hyp mode initialized successfully
[  +0.000941] kvm [1]: interrupt-controller@ff814000 IRQ43
[  +0.000833] kvm [1]: timer IRQ3
[  +0.004469] audit: initializing netlink subsys (disabled)
[  +0.000606] audit: type=2000 audit(0.958:1): initialized
[  +0.001808] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[  +0.013879] VFS: Disk quotas dquot_6.6.0
[  +0.000633] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[  +0.004953] NFS: Registering the id_resolver key type
[  +0.000558] Key type id_resolver registered
[  +0.000401] Key type id_legacy registered
[  +0.000417] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[  +0.001706] fuse init (API version 7.23)
[  +0.001482] JFS: nTxBlock = 8192, nTxLock = 65536
[  +0.007693] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[  +0.003453] Key type big_key registered
[  +0.000532]
TEE Core Framework initialization (ver 1:0.1)
[  +0.000673] TEE armv7 Driver initialization
[  +0.000849] tz_tee_probe: name="armv7sec", id=0, pdev_name="armv7sec.0"
[  +0.000635] TEE core: Alloc the misc device "opteearmtz00" (id=0)
[  +0.000944] TEE Core: Register the misc device "opteearmtz00" (id=0,minor=62)
[  +0.006982] NET: Registered protocol family 38
[  +0.000470] Key type asymmetric registered
[  +0.000433] Asymmetric key parser 'x509' registered
[  +0.000776] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[  +0.000988] io scheduler noop registered
[  +0.000563] io scheduler deadline registered (default)
[  +0.000548] io scheduler cfq registered
[  +0.001738] phy phy-ff450000.syscon:usb2-phy@100.0: Looking up phy-supply from device tree
[  +0.000021] phy phy-ff450000.syscon:usb2-phy@100.0: Looking up phy-supply property in node /syscon@ff450000/usb2-phy@100/host-port failed
[  +0.000572] phy phy-ff450000.syscon:usb2-phy@100.1: Looking up phy-supply from device tree
[  +0.000020] phy phy-ff450000.syscon:usb2-phy@100.1: Looking up phy-supply property in node /syscon@ff450000/usb2-phy@100/otg-port failed
[  +0.000399] rockchip-usb2phy ff450000.syscon:usb2-phy@100: GPIO lookup for consumer otg-vbus
[  +0.000016] rockchip-usb2phy ff450000.syscon:usb2-phy@100: using device tree for GPIO lookup
[  +0.000040] of_get_named_gpiod_flags: parsed 'otg-vbus-gpios' property of node '/syscon@ff450000/usb2-phy@100[0]' - status (0)
[  +0.000796] rockchip-u3phy ff470000.usb3-phy: GPIO lookup for consumer vbus-drv
[  +0.000017] rockchip-u3phy ff470000.usb3-phy: using device tree for GPIO lookup
[  +0.000032] of_get_named_gpiod_flags: parsed 'vbus-drv-gpios' property of node '/usb3-phy@ff470000[0]' - status (0)
[  +0.000437] phy phy-ff470000.usb3-phy.2: Looking up phy-supply from device tree
[  +0.000019] phy phy-ff470000.usb3-phy.2: Looking up phy-supply property in node /usb3-phy@ff470000/utmi@ff470000 failed
[  +0.000450] phy phy-ff470000.usb3-phy.3: Looking up phy-supply from device tree
[  +0.000019] phy phy-ff470000.usb3-phy.3: Looking up phy-supply property in node /usb3-phy@ff470000/pipe@ff478000 failed
[  +0.001612] rockchip-u3phy ff470000.usb3-phy: Rockchip u3phy initialized successfully
[  +0.001262] phy phy-ff430000.hdmiphy.4: Looking up phy-supply from device tree
[  +0.000019] phy phy-ff430000.hdmiphy.4: Looking up phy-supply property in node /hdmiphy@ff430000 failed
[  +0.002949] rk-vcodec ff350000.vpu-service: probe device
[  +0.000541] rk-vcodec ff350000.vpu-service: vpu mmu dec ffffffc079372c10
[  +0.000932] rk-vcodec ff350000.vpu-service: allocator is drm
[  +0.000629] rk-vcodec ff350000.vpu-service: checking hw id 0
[  +0.001217] rk-vcodec ff350000.vpu-service: init success
[  +0.001302] rk-vcodec ff360000.rkvdec: probe device
[  +0.000541] rk-vcodec ff360000.rkvdec: vpu mmu dec ffffffc079373410
[  +0.000884] rk-vcodec ff360000.rkvdec: allocator is drm
[  +0.000572] rk-vcodec ff360000.rkvdec: checking hw id 3410
[  +0.001206] rk-vcodec ff360000.rkvdec: init success
[  +0.000922] probe device ff330000.h265e
[  +0.000771] mpp_dev ff330000.h265e: try to get iommu dev ffffffc079373c10
[  +0.001078] mpp_dev ff330000.h265e: resource ready, register device
[  +0.000911] probe device ff340000.vepu
[  +0.000727] mpp_dev ff340000.vepu: try to get iommu dev ffffffc079394410
[  +0.000963] rockchip_mpp_vepu_reset_init:143: No aclk reset resource define
[  +0.000668] rockchip_mpp_vepu_reset_init:148: No hclk reset resource define
[  +0.000647] mpp_dev ff340000.vepu: resource ready, register device
[  +0.003728] dma-pl330 ff1f0000.dmac: Loaded driver for PL330 DMAC-241330
[  +0.000656] dma-pl330 ff1f0000.dmac:  DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[  +0.001833] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
[  +0.003534] [drm:drm_core_init] Initialized drm 1.1.0 20060810
[  +0.003766] rockchip-vop ff370000.vop: invalid resource
[  +0.000510] rockchip-vop ff370000.vop: failed to get vop lut registers
[  +0.000633] rockchip-vop ff370000.vop: invalid resource
[  +0.000511] rockchip-vop ff370000.vop: failed to get vop cabc lut registers
[  +0.000890] rockchip-drm display-subsystem: bound ff370000.vop (ops 0xffffff8008c61338)
[  +0.001144] i2c i2c-4: of_i2c: modalias failure on /hdmi@ff3c0000/ports
[  +0.000623] dwhdmi-rockchip ff3c0000.hdmi: registered DesignWare HDMI I2C bus driver
[  +0.000821] dwhdmi-rockchip ff3c0000.hdmi: Detected HDMI TX controller v2.11a with HDCP (inno_dw_hdmi_phy2)
[  +0.001938] rockchip-drm display-subsystem: bound ff3c0000.hdmi (ops 0xffffff8008c5bd28)
[  +0.000799] [drm:drm_vblank_init] Supports vblank timestamp caching Rev 2 (21.10.2013).
[  +0.000758] [drm:drm_vblank_init] No driver support for vblank timestamp query.
[  +0.000750] rockchip-drm display-subsystem: failed to parse display resources
[  +0.277488] Console: switching to colour frame buffer device 240x67
[  +0.051039] rockchip-drm display-subsystem: fb0:  frame buffer device
[  +0.009775] Unable to detect cache hierarchy from DT for CPU 0
[  +0.002135] brd: module loaded
[  +0.010126] loop: module loaded
[  +0.001509] zram: Added device: zram0
[  +0.000840] lkdtm: No crash points registered, enable through debugfs
[  +0.002535] rockchip-spi ff190000.spi: Failed to request TX DMA channel
[  +0.000887] rockchip-spi ff190000.spi: Failed to request RX DMA channel
[  +0.001792] m25p80 spi32766.0: gd25q128 (16384 Kbytes)
[  +0.000754] 6 ofpart partitions found on MTD device spi32766.0
[  +0.000762] Creating 6 MTD partitions on "spi32766.0":
[  +0.000703] 0x000000000000-0x000000008000 : "system"
[  +0.001179] 0x000000008000-0x000000400000 : "loader"
[  +0.001097] 0x000000400000-0x0000007c0000 : "reserved"
[  +0.001126] 0x0000007c0000-0x000000800000 : "vendor"
[  +0.001130] 0x000000800000-0x000000c00000 : "uboot"
[  +0.001111] 0x000000c00000-0x000001000000 : "atf"
[  +0.003000] rk_gmac-dwmac ff540000.eth: Looking up phy-supply from device tree
[  +0.000159] rk_gmac-dwmac ff540000.eth: clock input or output? (input).
[  +0.000900] rk_gmac-dwmac ff540000.eth: TX delay(0x26).
[  +0.000699] rk_gmac-dwmac ff540000.eth: RX delay(0x11).
[  +0.000890] rk_gmac-dwmac ff540000.eth: clock input from PHY
[  +0.000747] rk_gmac-dwmac ff540000.eth: init for RGMII
[  +0.005873] stmmac - user ID: 0x10, Synopsys ID: 0x35
[  +0.000645]  Ring mode enabled
[  +0.000418]  DMA HW capability register supported
[  +0.000581]  Normal descriptors
[  +0.000467]  RX Checksum Offload Engine supported (type 2)
[  +0.000702]  TX Checksum insertion supported
[  +0.000559]  Wake-Up On Lan supported
[  +0.000537]  Enable RX Mitigation via HW Watchdog Timer
[  +0.000859] of_get_named_gpiod_flags: parsed 'snps,reset-gpio' property of node '/eth@ff540000[0]' - status (0)
[  +0.078103] libphy: stmmac: probed
[  +0.000486] eth%d: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active
[  +0.000840] eth%d: PHY ID 001cc916 at 1 IRQ POLL (stmmac-0:01)
[  +0.002049] Rockchip WiFi SYS interface (V1.00) ...
[  +0.000796] usbcore: registered new interface driver cdc_ether
[  +0.000810] usbcore: registered new interface driver rndis_host
[  +0.002732] phy phy-ff470000.usb3-phy.2: u3phy u2 power on
[  +0.000845] phy phy-ff470000.usb3-phy.3: u3phy u3 power on
[  +0.001728] dwc2 ff580000.usb: Looking up vusb_d-supply from device tree
[  +0.000019] dwc2 ff580000.usb: Looking up vusb_d-supply property in node /usb@ff580000 failed
[  +0.000019] ff580000.usb supply vusb_d not found, using dummy regulator
[  +0.001004] dwc2 ff580000.usb: Looking up vusb_a-supply from device tree
[  +0.000019] dwc2 ff580000.usb: Looking up vusb_a-supply property in node /usb@ff580000 failed
[  +0.000014] ff580000.usb supply vusb_a not found, using dummy regulator
[  +0.157008] dwc2 ff580000.usb: DWC OTG Controller
[  +0.000654] dwc2 ff580000.usb: new USB bus registered, assigned bus number 1
[  +0.011634] dwc2 ff580000.usb: irq 40, io mem 0x00000000
[  +0.011598] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[  +0.011518] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  +0.011451] usb usb1: Product: DWC OTG Controller
[  +0.011127] usb usb1: Manufacturer: Linux 4.4.77-rockchip-ayufan-136 dwc2_hsotg
[  +0.011454] usb usb1: SerialNumber: ff580000.usb
[  +0.012031] hub 1-0:1.0: USB hub found
[  +0.011180] hub 1-0:1.0: 1 port detected
[  +0.012469] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[  +0.011569] ehci-pci: EHCI PCI platform driver
[  +0.011265] ehci-platform: EHCI generic platform driver
[  +0.013736] ehci-platform ff5c0000.usb: EHCI Host Controller
[  +0.011490] ehci-platform ff5c0000.usb: new USB bus registered, assigned bus number 2
[  +0.011501] ehci-platform ff5c0000.usb: irq 41, io mem 0xff5c0000
[  +0.016126] ehci-platform ff5c0000.usb: USB 2.0 started, EHCI 1.00
[  +0.011221] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[  +0.010946] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  +0.010863] usb usb2: Product: EHCI Host Controller
[  +0.010526] usb usb2: Manufacturer: Linux 4.4.77-rockchip-ayufan-136 ehci_hcd
[  +0.010756] usb usb2: SerialNumber: ff5c0000.usb
[  +0.011465] hub 2-0:1.0: USB hub found
[  +0.010354] hub 2-0:1.0: 1 port detected
[  +0.010831] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[  +0.010371] ohci-platform: OHCI generic platform driver
[  +0.010633] ohci-platform ff5d0000.usb: Generic Platform OHCI controller
[  +0.010608] ohci-platform ff5d0000.usb: new USB bus registered, assigned bus number 3
[  +0.010530] ohci-platform ff5d0000.usb: irq 42, io mem 0xff5d0000
[  +0.065120] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[  +0.010364] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  +0.010424] usb usb3: Product: Generic Platform OHCI controller
[  +0.010292] usb usb3: Manufacturer: Linux 4.4.77-rockchip-ayufan-136 ohci_hcd
[  +0.010410] usb usb3: SerialNumber: ff5d0000.usb
[  +0.011164] hub 3-0:1.0: USB hub found
[  +0.010235] hub 3-0:1.0: 1 port detected
[  +0.011309] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
[  +0.010687] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 4
[  +0.010737] xhci-hcd xhci-hcd.8.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x00210010
[  +0.010822] xhci-hcd xhci-hcd.8.auto: irq 180, io mem 0xff600000
[  +0.010800] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[  +0.010777] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  +0.010902] usb usb4: Product: xHCI Host Controller
[  +0.010764] usb usb4: Manufacturer: Linux 4.4.77-rockchip-ayufan-136 xhci-hcd
[  +0.011050] usb usb4: SerialNumber: xhci-hcd.8.auto
[  +0.011775] hub 4-0:1.0: USB hub found
[  +0.011133] hub 4-0:1.0: 1 port detected
[  +0.011457] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
[  +0.011456] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 5
[  +0.011521] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM.
[  +0.011776] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003
[  +0.011495] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  +0.011550] usb usb5: Product: xHCI Host Controller
[  +0.011294] usb usb5: Manufacturer: Linux 4.4.77-rockchip-ayufan-136 xhci-hcd
[  +0.011634] usb usb5: SerialNumber: xhci-hcd.8.auto
[  +0.012418] hub 5-0:1.0: USB hub found
[  +0.011635] hub 5-0:1.0: 1 port detected
[  +0.013636] usbcore: registered new interface driver usbtouchscreen
[  +0.012350] i2c /dev entries driver
[  +0.014161] rk808 1-0018: Pmic Chip id: 0x8050
[  +0.012536] rk808 1-0018: source: on=0x40, off=0x00
[  +0.017034] rk808 1-0018: Looking up vcc1-supply from device tree
[  +0.000169] DCDC_REG1: supplied by vcc_sys
[  +0.011443] vcc_sys: could not add device link regulator.4 err -2
[  +0.002612] vdd_logic: 712 <--> 1450 mV at 1100 mV
[  +0.000343] reg-fixed-voltage sdmmc-regulator: Looking up vin-supply from device tree
[  +0.000041] vcc_sd: unable to resolve supply
[  +0.000030] rk808 1-0018: Looking up vcc2-supply from device tree
[  +0.000105] DCDC_REG2: supplied by vcc_sys
[  +0.011301] vcc_sys: could not add device link regulator.5 err -2
[  +0.002136] vdd_arm: 712 <--> 1450 mV at 1100 mV
[  +0.000300] reg-fixed-voltage sdmmc-regulator: Looking up vin-supply from device tree
[  +0.000036] vcc_sd: unable to resolve supply
[  +0.000029] rk808 1-0018: Looking up vcc3-supply from device tree
[  +0.000103] DCDC_REG3: supplied by vcc_sys
[  +0.011294] vcc_sys: could not add device link regulator.6 err -2
[  +0.001461] vcc_ddr: at 5000 mV
[  +0.000287] reg-fixed-voltage sdmmc-regulator: Looking up vin-supply from device tree
[  +0.000039] vcc_sd: unable to resolve supply
[  +0.000031] rk808 1-0018: Looking up vcc4-supply from device tree
[  +0.000105] DCDC_REG4: supplied by vcc_sys
[  +0.011146] vcc_sys: could not add device link regulator.7 err -2
[  +0.001310] vcc_io: 3300 mV
[  +0.000335] reg-fixed-voltage sdmmc-regulator: Looking up vin-supply from device tree
[  +0.000036] vcc_sd: supplied by vcc_io
[  +0.011216] rk808 1-0018: Looking up vcc5-supply from device tree
[  +0.000030] LDO_REG1: supplied by vcc_io
[  +0.011123] vcc_io: could not add device link regulator.8 err -2
[  +0.002419] vcc_18: 1800 mV
[  +0.000334] rk808 1-0018: Looking up vcc5-supply from device tree
[  +0.000035] LDO_REG2: supplied by vcc_io
[  +0.010986] vcc_io: could not add device link regulator.9 err -2
[  +0.002392] vcc18_emmc: 1800 mV
[  +0.000355] rk808 1-0018: Looking up vcc6-supply from device tree
[  +0.000123] LDO_REG3: supplied by vcc_sys
[  +0.010896] vcc_sys: could not add device link regulator.10 err -2
[  +0.002413] vdd_10: 1000 mV
[  +0.000347] rk808 1-0018: register rk8050 regulators
[  +0.011127] gpiochip_find_base: found new base at 510
[  +0.000162] gpiochip_add: registered GPIOs 510 to 511 on device: rk8xx-gpio
[  +0.000016] rk8xx-gpio rk8xx-gpio: register rk8050 gpio successful
[  +0.013196] input: rk8xx_pwrkey as /devices/platform/ff160000.i2c/i2c-1/1-0018/input/input0
[  +0.012049] rk808-rtc rk808-rtc: device is disabled
[  +0.011148] rk808-rtc: probe of rk808-rtc failed with error -22
[  +0.011215] rk3x-i2c ff160000.i2c: Initialized RK3xxx I2C bus at ffffff800a25a000
[  +0.013037] IR NEC protocol handler initialized
[  +0.012083] usbcore: registered new interface driver uvcvideo
[  +0.011345] USB Video Class driver (1.1.1)
[  +0.011673] rockchip-iodomain ff100000.syscon:io-domains: Looking up vccio1-supply from device tree
[  +0.000138] rockchip-iodomain ff100000.syscon:io-domains: Looking up vccio2-supply from device tree
[  +0.000630] rockchip-iodomain ff100000.syscon:io-domains: Looking up vccio3-supply from device tree
[  +0.000136] rockchip-iodomain ff100000.syscon:io-domains: Looking up vccio4-supply from device tree
[  +0.000568] rockchip-iodomain ff100000.syscon:io-domains: Looking up vccio5-supply from device tree
[  +0.000094] rockchip-iodomain ff100000.syscon:io-domains: Looking up vccio6-supply from device tree
[  +0.000083] rockchip-iodomain ff100000.syscon:io-domains: Looking up pmuio-supply from device tree
[  +0.001881] rockchip-thermal ff250000.tsadc: Missing tshut mode property, using default (cru)
[  +0.011883] rockchip-thermal ff250000.tsadc: Missing tshut-polarity property, using default (low)
[  +0.013513] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[  +0.012051] Bluetooth: Virtual HCI driver ver 1.5
[  +0.011841] Bluetooth: HCI UART driver ver 2.3
[  +0.011590] Bluetooth: HCI UART protocol H4 registered
[  +0.011491] Bluetooth: HCI UART protocol LL registered
[  +0.011369] Bluetooth: HCI UART protocol ATH3K registered
[  +0.011699] usbcore: registered new interface driver bfusb
[  +0.011408] usbcore: registered new interface driver btusb
[  +0.011506] cpu cpu0: Looking up cpu-supply from device tree
[  +0.000551] cpu cpu0: Looking up cpu-supply from device tree
[  +0.000224] cpu cpu0: Looking up cpu-supply from device tree
[  +0.002028] sdhci: Secure Digital Host Controller Interface driver
[  +0.011373] sdhci: Copyright(c) Pierre Ossman
[  +0.011313] Synopsys Designware Multimedia Card Interface Driver
[  +0.012488] dwmmc_rockchip ff520000.rksdmmc: IDMAC supports 32-bit address mode.
[  +0.007246] dwmmc_rockchip ff520000.rksdmmc: Using internal DMA controller.
[  +0.007103] dwmmc_rockchip ff520000.rksdmmc: Version ID is 270a
[  +0.006991] dwmmc_rockchip ff520000.rksdmmc: DW MMC controller at irq 37,32 bit host data width,256 deep fifo
[  +0.007546] dwmmc_rockchip ff520000.rksdmmc: Looking up vmmc-supply from device tree
[  +0.000411] dwmmc_rockchip ff520000.rksdmmc: Looking up vqmmc-supply from device tree
[  +0.000552] dwmmc_rockchip ff520000.rksdmmc: GPIO lookup for consumer wp
[  +0.000008] dwmmc_rockchip ff520000.rksdmmc: using device tree for GPIO lookup
[  +0.000010] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/rksdmmc@ff520000[0]'
[  +0.000007] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/rksdmmc@ff520000[0]'
[  +0.000007] dwmmc_rockchip ff520000.rksdmmc: using lookup tables for GPIO lookup
[  +0.000007] dwmmc_rockchip ff520000.rksdmmc: lookup for GPIO wp failed
[  +0.010989] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[  +0.017051] dwmmc_rockchip ff520000.rksdmmc: 1 slots initialized
[  +0.006611] dwmmc_rockchip ff500000.rksdmmc: IDMAC supports 32-bit address mode.
[  +0.006312] dwmmc_rockchip ff500000.rksdmmc: Using internal DMA controller.
[  +0.006137] dwmmc_rockchip ff500000.rksdmmc: Version ID is 270a
[  +0.006151] dwmmc_rockchip ff500000.rksdmmc: DW MMC controller at irq 38,32 bit host data width,256 deep fifo
[  +0.006561] dwmmc_rockchip ff500000.rksdmmc: Looking up vmmc-supply from device tree
[  +0.000192] dwmmc_rockchip ff500000.rksdmmc: Looking up vqmmc-supply from device tree
[  +0.000086] dwmmc_rockchip ff500000.rksdmmc: GPIO lookup for consumer cd
[  +0.000007] dwmmc_rockchip ff500000.rksdmmc: using device tree for GPIO lookup
[  +0.000020] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/rksdmmc@ff500000[0]' - status (0)
[  +0.000032] dwmmc_rockchip ff500000.rksdmmc: Got CD GPIO
[  +0.005739] dwmmc_rockchip ff500000.rksdmmc: GPIO lookup for consumer wp
[  +0.000007] dwmmc_rockchip ff500000.rksdmmc: using device tree for GPIO lookup
[  +0.000009] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/rksdmmc@ff500000[0]'
[  +0.000006] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/rksdmmc@ff500000[0]'
[  +0.000006] dwmmc_rockchip ff500000.rksdmmc: using lookup tables for GPIO lookup
[  +0.000007] dwmmc_rockchip ff500000.rksdmmc: lookup for GPIO wp failed
[  +0.010067] mmc_host mmc0: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0)
[  +0.006166] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[  +0.017342] dwmmc_rockchip ff500000.rksdmmc: 1 slots initialized
[  +0.012060] sdhci-pltfm: SDHCI platform and OF driver helper
[  +0.001478] mmc_host mmc0: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0)
[  +0.023096] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/standby-led[0]' - status (0)
[  +0.000623] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/power-led[0]' - status (0)
[  +0.000182] of_get_named_gpiod_flags: parsed 'gpios' property of node '/switches/usb-switch[0]' - status (0)
[  +0.000308] hidraw: raw HID events driver (C) Jiri Kosina
[  +0.006834] mmc_host mmc0: Bus speed (slot 0) = 100000Hz (slot req 100000Hz, actual 100000HZ div = 0)
[  +0.008697] usbcore: registered new interface driver usbhid
[  +0.007446] usbhid: USB HID core driver
[  +0.007514] usbcore: registered new interface driver snd-usb-audio
[  +0.007314] rk3328-codec ff410000.codec: spk_depop_time use default value.
[  +0.009765] u32 classifier
[  +0.005760] Netfilter messages via NETLINK v0.30.
[  +0.005950] ip_set: protocol 6
[  +0.005818] Initializing XFRM netlink socket
[  +0.006293] NET: Registered protocol family 10
[  +0.006771] NET: Registered protocol family 17
[  +0.002957] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
[  +0.000060] mmc1: new SDHC card at address 0001
[  +0.000507] mmcblk1: mmc1:0001 ASTC 7.32 GiB
[  +0.009747]  mmcblk1: p1 p2 p3 p4 p5 p6 p7
[  +0.016066] NET: Registered protocol family 15
[  +0.005803] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[  +0.006680] Bridge firewalling registered
[  +0.006072] Bluetooth: RFCOMM socket layer initialized
[  +0.006097] Bluetooth: RFCOMM ver 1.11
[  +0.005883] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[  +0.006144] Bluetooth: HIDP socket layer initialized
[  +0.006138] 8021q: 802.1Q VLAN Support v1.8
[  +0.006098] [WLAN_RFKILL]: Enter rfkill_wlan_init
[  +0.006345] [BT_RFKILL]: Enter rfkill_rk_init
[  +0.006284] Key type dns_resolver registered
[  +0.006730] Registered cp15_barrier emulation handler
[  +0.006293] Registered setend emulation handler
[  +0.006892] registered taskstats version 1
[  +0.008001] Btrfs loaded, integrity-checker=on
[  +0.006219] BTRFS: selftest: Running btrfs free space cache tests
[  +0.006249] BTRFS: selftest: Running extent only tests
[  +0.006101] BTRFS: selftest: Running bitmap only tests
[  +0.006013] BTRFS: selftest: Running bitmap and extent tests
[  +0.005992] BTRFS: selftest: Running space stealing from bitmap to extent
[  +0.006940] BTRFS: selftest: Free space cache tests finished
[  +0.005944] BTRFS: selftest: Running extent buffer operation tests
[  +0.000639] BTRFS: selftest: Running btrfs_split_item tests
[  +0.011210] BTRFS: selftest: Running find delalloc tests
[  +0.007541] vendor storage:20160801 ret = 0
[  +0.210225] BTRFS: selftest: Running btrfs_get_extent tests
[  +0.006022] BTRFS: selftest: Running hole first btrfs_get_extent test
[  +0.006196] BTRFS: selftest: Running outstanding_extents tests
[  +0.006208] BTRFS: selftest: Running qgroup tests
[  +0.005770] BTRFS: selftest: Qgroup basic add
[  +0.005742] BTRFS: selftest: Qgroup multiple refs test
[  +0.017359] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/hdmi-sound[0]'
[  +0.000011] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/hdmi-sound[0]'
[  +0.000424] asoc-simple-card hdmi-sound: i2s-hifi <-> ff000000.i2s mapping ok
[  +0.007180] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/sound[0]'
[  +0.000012] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/sound[0]'
[  +0.020440] asoc-simple-card sound: rk3328-hifi <-> ff010000.i2s mapping ok
[  +0.008026] asoc-simple-card sound: snd-soc-dummy-dai <-> ff010000.i2s mapping ok
[  +0.008997] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/spdif-sound[0]'
[  +0.000013] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/spdif-sound[0]'
[  +0.000426] asoc-simple-card spdif-sound: dit-hifi <-> ff030000.spdif mapping ok
[  +0.006882] hctosys: unable to open rtc device (rtc0)
[  +0.025081] rockchip-pm-domain ff100000.syscon:power-controller: failed to get ack on domain 'pd_video', val=0x10040
[  +0.016540] rockchip-pm-domain ff100000.syscon:power-controller: failed to get ack on domain 'pd_vpu', val=0x10040
[  +0.006392] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 414; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '-a58dd56', rk_ko_ver is '5', built at '09:12:53', on 'Oct 12 2017'.
[  +0.007787] mali-utgard ff300000.gpu: mali_platform_device->num_resources = 9
[  +0.006397] mali-utgard ff300000.gpu: resource[0].start = 0x0x00000000ff300000
[  +0.006390] mali-utgard ff300000.gpu: resource[1].start = 0x0x00000000ff300000
[  +0.006339] mali-utgard ff300000.gpu: resource[2].start = 0x0x0000000000000011
[  +0.006311] mali-utgard ff300000.gpu: resource[3].start = 0x0x0000000000000012
[  +0.006227] mali-utgard ff300000.gpu: resource[4].start = 0x0x0000000000000013
[  +0.006146] mali-utgard ff300000.gpu: resource[5].start = 0x0x0000000000000014
[  +0.006032] mali-utgard ff300000.gpu: resource[6].start = 0x0x0000000000000015
[  +0.006024] mali-utgard ff300000.gpu: resource[7].start = 0x0x0000000000000016
[  +0.005908] mali-utgard ff300000.gpu: resource[8].start = 0x0x0000000000000017
[  +0.005840] D : [File] : drivers/gpu/arm/mali400/mali/platform/rk/rk.c; [Line] : 518; [Func] : mali_platform_device_init(); to add platform_specific_data to platform_device_of_mali.
[  +0.006905] mali-utgard ff300000.gpu: Looking up mali-supply from device tree
[  +0.002010] Mali: Mali device driver loaded
[  +0.007099] ALSA device list:
[  +0.005610]   #0: HDMI
[  +0.005393]   #1: I2S
[  +0.005309]   #2: SPDIF
[  +0.005845] Freeing unused kernel memory: 1152K (ffffff8008fb0000 - ffffff80090d0000)
[  +0.040817] systemd-udevd[166]: starting version 215
[  +0.006996] random: systemd-udevd: uninitialized urandom read (16 bytes read, 11 bits of entropy available)
[  +0.491679] random: lvm: uninitialized urandom read (4 bytes read, 25 bits of entropy available)
[  +5.739280] EXT4-fs (mmcblk1p7): 1 orphan inode deleted
[  +0.017491] EXT4-fs (mmcblk1p7): recovery complete
[  +0.031833] EXT4-fs (mmcblk1p7): mounted filesystem with writeback data mode. Opts: (null)
[  +0.411870] random: systemd: uninitialized urandom read (16 bytes read, 77 bits of entropy available)
[  +0.025330] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[  +0.019654] systemd[1]: Detected architecture 'arm64'.
[  +0.042596] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.007870] usb usb5-port1: cannot disable (err = -32)
[  +0.079515] systemd[1]: Failed to insert module 'autofs4'
[  +0.033911] systemd[1]: Set hostname to <rock64>.
[  +0.178908] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 82 bits of entropy available)
[Mar22 16:17] random: systemd: uninitialized urandom read (16 bytes read, 88 bits of entropy available)
[  +0.014560] random: systemd: uninitialized urandom read (16 bytes read, 88 bits of entropy available)
[  +0.013991] random: systemd: uninitialized urandom read (16 bytes read, 88 bits of entropy available)
[  +0.028088] random: systemd: uninitialized urandom read (16 bytes read, 89 bits of entropy available)
[  +0.008378] random: systemd: uninitialized urandom read (16 bytes read, 89 bits of entropy available)
[  +0.007987] random: systemd: uninitialized urandom read (16 bytes read, 89 bits of entropy available)
[  +0.358686] systemd[1]: Cannot add dependency job for unit syncthing-inotify@syncthing.service, ignoring: Unit syncthing-inotify@syncthing.service failed to load: No such file or directory.
[  +0.020401] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[  +0.022906] systemd[1]: Expecting device dev-ttyFIQ0.device...
[  +0.008628] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[  +0.008694] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[  +0.007167] systemd[1]: Starting Remote File Systems (Pre).
[  +0.007122] systemd[1]: Reached target Remote File Systems (Pre).
[  +0.007483] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[  +0.007044] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[  +0.007071] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[  +0.006973] systemd[1]: Starting Swap.
[  +0.006683] systemd[1]: Reached target Swap.
[  +0.006764] systemd[1]: Expecting device dev-disk-by\x2did-ata\x2dWDC_WD3201ABYS\x2d01B9A0_WD\x2dWCARW3198910\x2dpart1.device...
[  +0.007697] systemd[1]: Starting Root Slice.
[  +0.007404] systemd[1]: Created slice Root Slice.
[  +0.007080] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[  +0.007333] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[  +0.007473] systemd[1]: Starting Delayed Shutdown Socket.
[  +0.007220] systemd[1]: Listening on Delayed Shutdown Socket.
[  +0.007330] systemd[1]: Starting Journal Socket (/dev/log).
[  +0.007319] systemd[1]: Listening on Journal Socket (/dev/log).
[  +0.007396] systemd[1]: Starting Device-mapper event daemon FIFOs.
[  +0.007336] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[  +0.007466] systemd[1]: Starting LVM2 metadata daemon socket.
[  +0.007305] systemd[1]: Listening on LVM2 metadata daemon socket.
[  +0.007408] systemd[1]: Starting udev Control Socket.
[  +0.007195] systemd[1]: Listening on udev Control Socket.
[  +0.007105] systemd[1]: Starting udev Kernel Socket.
[  +0.007072] systemd[1]: Listening on udev Kernel Socket.
[  +0.006856] systemd[1]: Starting User and Session Slice.
[  +0.006662] systemd[1]: Created slice User and Session Slice.
[  +0.006737] systemd[1]: Starting Journal Socket.
[  +0.006660] systemd[1]: Listening on Journal Socket.
[  +0.006753] systemd[1]: Starting System Slice.
[  +0.006700] systemd[1]: Created slice System Slice.
[  +0.006808] systemd[1]: Starting Increase datagram queue length...
[  +0.008496] systemd[1]: Starting system-systemd\x2dfsck.slice.
[  +0.007236] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[  +0.007216] systemd[1]: Starting Restore / save the current clock...
[  +0.011531] systemd[1]: Starting Nameserver information manager...
[  +0.008906] systemd[1]: Mounting POSIX Message Queue File System...
[  +0.008642] systemd[1]: Mounting Huge Pages File System...
[  +0.008477] systemd[1]: Starting udev Coldplug all Devices...
[  +0.030671] systemd[1]: Started Set Up Additional Binary Formats.
[  +0.031178] systemd[1]: Starting Load Kernel Modules...
[  +0.009195] systemd[1]: Mounting Debug File System...
[  +0.009086] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[  +0.009346] systemd[1]: Starting system-syncthing.slice.
[  +0.006916] systemd[1]: Created slice system-syncthing.slice.
[  +0.006732] systemd[1]: Starting system-openvpn.slice.
[  +0.006808] systemd[1]: Created slice system-openvpn.slice.
[  +0.006593] systemd[1]: Starting system-getty.slice.
[  +0.006672] systemd[1]: Created slice system-getty.slice.
[  +0.006402] systemd[1]: Starting system-serial\x2dgetty.slice.
[  +0.006526] systemd[1]: Created slice system-serial\x2dgetty.slice.
[  +0.006359] systemd[1]: Starting Remount Root and Kernel File Systems...
[  +0.008046] systemd[1]: Starting Slices.
[  +0.006073] systemd[1]: Reached target Slices.
[  +0.006017] systemd[1]: Expecting device dev-disk-by\x2dlabel-boot.device...
[  +0.007811] systemd[1]: Mounted Debug File System.
[  +0.006286] systemd[1]: Mounted Huge Pages File System.
[  +0.006255] systemd[1]: Mounted POSIX Message Queue File System.
[  +0.007162] systemd[1]: Started Increase datagram queue length.
[  +0.007656] systemd[1]: Started Restore / save the current clock.
[  +0.012627] systemd[1]: Started Load Kernel Modules.
[  +0.008631] systemd[1]: Started Create list of required static device nodes for the current kernel.
[  +0.008352] systemd[1]: Started Remount Root and Kernel File Systems.
[  +0.009135] systemd[1]: Started Nameserver information manager.
[  +0.011415] systemd[1]: Started udev Coldplug all Devices.
[  +0.006540] systemd[1]: Time has been changed
[  +0.113963] systemd[1]: Starting udev Wait for Complete Device Initialization...
[  +0.024574] systemd[1]: Starting Initial Check File System Quotas...
[  +0.026115] systemd[1]: Started Various fixups to make systemd work better on Debian.
[  +0.006026] systemd[1]: Starting Load/Save Random Seed...
[  +0.021541] systemd[1]: Starting Create Static Device Nodes in /dev...
[  +0.012027] systemd[1]: Mounting FUSE Control File System...
[  +0.016309] systemd[1]: Starting Apply Kernel Variables...
[  +0.012716] systemd[1]: Mounting Configuration File System...
[  +0.013367] systemd[1]: Starting Syslog Socket.
[  +0.006488] systemd[1]: Listening on Syslog Socket.
[  +0.005508] systemd[1]: Starting Journal Service...
[  +0.007914] systemd[1]: Started Journal Service.
[  +0.181118] systemd-udevd[306]: starting version 215
[  +0.825230] FAT-fs (mmcblk1p6): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[  +0.149180] FAT-fs (mmcblk1p6): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[  +0.276156] random: nonblocking pool is initialized
[  +0.451759] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.015960] usb usb5-port1: cannot disable (err = -32)
[  +5.671953] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.016025] usb usb5-port1: cannot disable (err = -32)
[  +1.188064] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.016077] usb usb5-port1: cannot disable (err = -32)
[Mar22 16:18] systemd-journald[303]: Received request to flush runtime journal from PID 1
[  +0.200184] ip_tables: (C) 2000-2006 Netfilter Core Team
[  +0.070663] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[  +0.407768] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.016891] usb usb5-port1: cannot disable (err = -32)
[  +1.174237] rk_gmac-dwmac ff540000.eth: rk_get_eth_addr: mac address: 1e:c5:ec:5c:8f:fa
[  +0.017241] eth0: device MAC address 1e:c5:ec:5c:8f:fa
[  +4.069130] rk_gmac-dwmac ff540000.eth eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[  +8.399302] tun: Universal TUN/TAP device driver, 1.6
[  +0.007420] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[  +3.238472] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.006084] usb usb5-port1: cannot disable (err = -32)
[  +2.967028] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.000707] usb usb5-port1: cannot disable (err = -32)
[  +1.431289] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.000659] usb usb5-port1: cannot disable (err = -32)
[  +4.089608] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.000864] usb usb5-port1: cannot disable (err = -32)
[Mar22 16:19] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.000645] usb usb5-port1: cannot disable (err = -32)

[f5Qz]

So it seems to work only when you power off and on the external hard drive a few times...

Booting when power-on:

root@rock64:~# dmesg -wH
[Mar22 16:18] Booting Linux on physical CPU 0x0
[  +0.000000] Initializing cgroup subsys cpuset
[  +0.000000] Initializing cgroup subsys cpu
[  +0.000000] Initializing cgroup subsys cpuacct
[  +0.000000] Linux version 4.4.77-rockchip-ayufan-136 (root@713b8312374e) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.4) ) #1 SMP Thu Oct 12 09:14:48 UTC 2017
[  +0.000000] Boot CPU: AArch64 Processor [410fd034]
[  +0.000000] earlycon: Early serial console at MMIO32 0xff130000 (options '')
[  +0.000000] bootconsole [uart0] enabled
[  +0.000000] On node 0 totalpages: 523776
[  +0.000000]   DMA zone: 8184 pages used for memmap
[  +0.000000]   DMA zone: 0 pages reserved
[  +0.000000]   DMA zone: 523776 pages, LIFO batch:31
[  +0.000000] psci: probing for conduit method from DT.
[  +0.000000] psci: PSCIv1.0 detected in firmware.
[  +0.000000] psci: Using standard PSCI v0.2 function IDs
[  +0.000000] psci: MIGRATE_INFO_TYPE not supported.
[  +0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc07ff4e000 s46504 r8192 d31320 u86016
[  +0.000000] pcpu-alloc: s46504 r8192 d31320 u86016 alloc=21*4096
[  +0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[  +0.000000] Detected VIPT I-cache on CPU0
[  +0.000000] CPU features: enabling workaround for ARM erratum 845719
[  +0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 515592
[  +0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff130000 rw root=LABEL=linux-root rootwait rootfstype=ext4 init=/sbin/init coherent_pool=1M ethaddr=1e:c5:ec:5c:8f:fa eth1addr=1e:c5:ec:5c:8f:1a serial=87d9cb75058e39e
[  +0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[  +0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[  +0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[  +0.000000] software IO TLB [mem 0x79400000-0x7d400000] (64MB) mapped at [ffffffc079400000-ffffffc07d3fffff]
[  +0.000000] Memory: 1969420K/2095104K available (11390K kernel code, 1466K rwdata, 4124K rodata, 1152K init, 747K bss, 125684K reserved, 0K cma-reserved)
[  +0.000000] Virtual kernel memory layout:
    modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
    vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000   (   246 GB)
      .init : 0xffffff8008fb0000 - 0xffffff80090d0000   (  1152 KB)
      .text : 0xffffff8008080000 - 0xffffff8008ba0000   ( 11392 KB)
    .rodata : 0xffffff8008ba0000 - 0xffffff8008fb0000   (  4160 KB)
      .data : 0xffffff80090d0000 - 0xffffff800923e808   (  1467 KB)
    vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8 GB maximum)
              0xffffffbdc0008000 - 0xffffffbdc2000000   (    31 MB actual)
    fixed   : 0xffffffbffe7fd000 - 0xffffffbffec00000   (  4108 KB)
    PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000   (    16 MB)
    memory  : 0xffffffc000200000 - 0xffffffc080000000   (  2046 MB)
[  +0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[  +0.000000] Hierarchical RCU implementation.
[  +0.000000]   Build-time adjustment of leaf fanout to 64.
[  +0.000000]   RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[  +0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[  +0.000000] NR_IRQS:64 nr_irqs:64 0
[  +0.000000] GIC: Using split EOI/Deactivate mode
[  +0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[  +0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[  +0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[  +0.001585] Console: colour dummy device 80x25
[  +0.000409] console [tty0] enabled
[  +0.000323] bootconsole [uart0] disabled
[  +0.000397] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
[  +0.000038] pid_max: default: 32768 minimum: 301
[  +0.000139] Security Framework initialized
[  +0.000022] Yama: becoming mindful.
[  +0.000035] AppArmor: AppArmor disabled by boot time parameter
[  +0.000082] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[  +0.000028] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[  +0.000864] Initializing cgroup subsys io
[  +0.000032] Initializing cgroup subsys memory
[  +0.000047] Initializing cgroup subsys devices
[  +0.000027] Initializing cgroup subsys freezer
[  +0.000025] Initializing cgroup subsys net_cls
[  +0.000024] Initializing cgroup subsys perf_event
[  +0.000026] Initializing cgroup subsys net_prio
[  +0.000032] Initializing cgroup subsys hugetlb
[  +0.000023] Initializing cgroup subsys pids
[  +0.000061] ftrace: allocating 42863 entries in 168 pages
[  +0.117638] sched-energy: CPU device node has no sched-energy-costs
[  +0.000035] Invalid sched_group_energy for CPU0
[  +0.000018] CPU0: update cpu_capacity 1024
[  +0.000068] ASID allocator initialised with 65536 entries
[  +0.005287] Detected VIPT I-cache on CPU1
[  +0.000057] Invalid sched_group_energy for CPU1
[  +0.000006] CPU1: update cpu_capacity 1024
[  +0.000005] CPU1: Booted secondary processor [410fd034]
[  +0.000791] Detected VIPT I-cache on CPU2
[  +0.000045] Invalid sched_group_energy for CPU2
[  +0.000005] CPU2: update cpu_capacity 1024
[  +0.000005] CPU2: Booted secondary processor [410fd034]
[  +0.000740] Detected VIPT I-cache on CPU3
[  +0.000045] Invalid sched_group_energy for CPU3
[  +0.000005] CPU3: update cpu_capacity 1024
[  +0.000005] CPU3: Booted secondary processor [410fd034]
[  +0.000128] Brought up 4 CPUs
[  +0.000303] SMP: Total of 4 processors activated.
[  +0.000036] CPU: All CPU(s) started at EL2
[  +0.000062] alternatives: patching kernel code
[  +0.000254] Invalid sched_group_energy for CPU3
[  +0.000032] Invalid sched_group_energy for Cluster3
[  +0.000027] Invalid sched_group_energy for CPU2
[  +0.000028] Invalid sched_group_energy for Cluster2
[  +0.000028] Invalid sched_group_energy for CPU1
[  +0.000027] Invalid sched_group_energy for Cluster1
[  +0.000052] Invalid sched_group_energy for CPU0
[  +0.000029] Invalid sched_group_energy for Cluster0
[  +0.000719] devtmpfs: initialized
[  +0.016633] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[  +0.000081] futex hash table entries: 1024 (order: 4, 65536 bytes)
[  +0.000649] xor: measuring software checksum speed
[  +0.009285]    8regs     :  1080.000 MB/sec
[  +0.010094]    8regs_prefetch:   968.000 MB/sec
[  +0.010096]    32regs    :  1352.000 MB/sec
[  +0.010097]    32regs_prefetch:  1116.000 MB/sec
[  +0.000031] xor: using function: 32regs (1352.000 MB/sec)
[  +0.000080] pinctrl core: initialized pinctrl subsystem
[  +0.000401] regulator-dummy: no parameters
[  +0.000916] NET: Registered protocol family 16
[  +0.003681] cpuidle: using governor ladder
[  +0.004034] cpuidle: using governor menu
[  +0.000050] Registered FIQ tty driver
[  +0.000464] vdso: 2 pages (1 code @ ffffff8008ba6000, 1 data @ ffffff80090d4000)
[  +0.000073] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[  +0.000501] DMA: preallocated 1024 KiB pool for atomic allocations
[  +0.013860] gpiochip_add: registered GPIOs 0 to 31 on device: gpio0
[  +0.000142] gpiochip_add: registered GPIOs 32 to 63 on device: gpio1
[  +0.000130] gpiochip_add: registered GPIOs 64 to 95 on device: gpio2
[  +0.000163] gpiochip_add: registered GPIOs 96 to 127 on device: gpio3
[  +0.009516] genirq: Setting trigger mode 8 for irq 176 failed (gic_set_type+0x0/0x68)
[  +0.058608] console [ttyFIQ0] enabled
[  +0.000668] Registered fiq debugger ttyFIQ0
[  +0.035037] raid6: int64x1  gen()   187 MB/s
[  +0.017098] raid6: int64x1  xor()   181 MB/s
[  +0.017234] raid6: int64x2  gen()   292 MB/s
[  +0.017189] raid6: int64x2  xor()   275 MB/s
[  +0.017228] raid6: int64x4  gen()   468 MB/s
[  +0.017153] raid6: int64x4  xor()   337 MB/s
[  +0.017278] raid6: int64x8  gen()   332 MB/s
[  +0.017144] raid6: int64x8  xor()   267 MB/s
[  +0.017112] raid6: neonx1   gen()   359 MB/s
[  +0.017272] raid6: neonx1   xor()   365 MB/s
[  +0.017117] raid6: neonx2   gen()   562 MB/s
[  +0.017246] raid6: neonx2   xor()   488 MB/s
[  +0.017211] raid6: neonx4   gen()   757 MB/s
[  +0.017150] raid6: neonx4   xor()   574 MB/s
[  +0.017196] raid6: neonx8   gen()   773 MB/s
[  +0.017213] raid6: neonx8   xor()   576 MB/s
[  +0.000402] raid6: using algorithm neonx8 gen() 773 MB/s
[  +0.000489] raid6: .... xor() 576 MB/s, rmw enabled
[  +0.000470] raid6: using intx1 recovery algorithm
[  +0.000918] mpp venc_srv: mpp_probe enter
[  +0.000437] mpp venc_srv: init success
[  +0.001026] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc-phy-regulator[0]'
[  +0.000037] vcc_phy: no parameters
[  +0.000237] reg-fixed-voltage vcc-phy-regulator: vcc_phy supplying 0uV
[  +0.000263] of_get_named_gpiod_flags: parsed 'gpio' property of node '/sdmmc-regulator[0]' - status (0)
[  +0.000066] reg-fixed-voltage sdmmc-regulator: Looking up vin-supply from device tree
[  +0.000023] vcc_sd: unable to resolve supply
[  +0.000015] vcc_sd: 3300 mV
[  +0.000228] reg-fixed-voltage sdmmc-regulator: Looking up vin-supply from device tree
[  +0.000021] vcc_sd: unable to resolve supply
[  +0.000017] reg-fixed-voltage sdmmc-regulator: vcc_sd supplying 3300000uV
[  +0.000123] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc-sys[0]'
[  +0.000035] vcc_sys: 5000 mV
[  +0.000205] reg-fixed-voltage sdmmc-regulator: Looking up vin-supply from device tree
[  +0.000021] vcc_sd: unable to resolve supply
[  +0.000016] reg-fixed-voltage vcc-sys: vcc_sys supplying 5000000uV
[  +0.000640] iommu: Adding device ff350000.vpu-service to group 0
[  +0.000687] iommu: Adding device ff360000.rkvdec to group 1
[  +0.000592] iommu: Adding device ff330000.h265e to group 2
[  +0.000607] iommu: Adding device ff340000.vepu to group 3
[  +0.000578] iommu: Adding device ff370000.vop to group 4
[  +0.001422] rk_iommu ff360480.iommu: can't get aclk
[  +0.000506] rk_iommu ff360480.iommu: can't get hclk
[  +0.000623] rk_iommu ff330200.iommu: can't get aclk
[  +0.000489] rk_iommu ff330200.iommu: can't get hclk
[  +0.000814] rk_iommu ff373f00.iommu: can't get aclk
[  +0.000486] rk_iommu ff373f00.iommu: can't get hclk
[  +0.001090] SCSI subsystem initialized
[  +0.000667] usbcore: registered new interface driver usbfs
[  +0.000605] usbcore: registered new interface driver hub
[  +0.000606] usbcore: registered new device driver usb
[  +0.000598] media: Linux media interface: v0.10
[  +0.000487] Linux video capture interface: v2.00
[  +0.000553] pps_core: LinuxPPS API ver. 1 registered
[  +0.000468] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[  +0.000974] PTP clock support registered
[  +0.002038] Advanced Linux Sound Architecture Driver Initialized.
[  +0.001446] Bluetooth: Core ver 2.21
[  +0.000419] NET: Registered protocol family 31
[  +0.000445] Bluetooth: HCI device and connection manager initialized
[  +0.000596] Bluetooth: HCI socket layer initialized
[  +0.000480] Bluetooth: L2CAP socket layer initialized
[  +0.000505] Bluetooth: SCO socket layer initialized
[  +0.001177] NetLabel: Initializing
[  +0.000356] NetLabel:  domain hash size = 128
[  +0.000409] NetLabel:  protocols = UNLABELED CIPSOv4
[  +0.000535] NetLabel:  unlabeled traffic allowed by default
[  +0.000983] rockchip-cpuinfo cpuinfo: Serial          : 87d9cb75058e39e1
[  +0.001355] clocksource: Switched to clocksource arch_sys_counter
[  +0.100354] NET: Registered protocol family 2
[  +0.001291] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[  +0.000927] TCP bind hash table entries: 16384 (order: 7, 524288 bytes)
[  +0.001376] TCP: Hash tables configured (established 16384 bind 16384)
[  +0.000754] UDP hash table entries: 1024 (order: 4, 98304 bytes)
[  +0.000725] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes)
[  +0.001045] NET: Registered protocol family 1
[  +0.000911] RPC: Registered named UNIX socket transport module.
[  +0.000555] RPC: Registered udp transport module.
[  +0.000474] RPC: Registered tcp transport module.
[  +0.000444] RPC: Registered tcp NFSv4.1 backchannel transport module.
[  +0.000629] PCI: CLS 0 bytes, default 64
[  +0.000281] Trying to unpack rootfs image as initramfs...
[  +0.329089] Freeing initrd memory: 4156K (ffffffc07db0b000 - ffffffc07df1a000)
[  +0.001508] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[  +0.001978] kvm [1]: 8-bit VMID
[  +0.000314] kvm [1]: Hyp mode initialized successfully
[  +0.000944] kvm [1]: interrupt-controller@ff814000 IRQ43
[  +0.000829] kvm [1]: timer IRQ3
[  +0.004472] audit: initializing netlink subsys (disabled)
[  +0.000605] audit: type=2000 audit(0.958:1): initialized
[  +0.001811] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[  +0.013889] VFS: Disk quotas dquot_6.6.0
[  +0.000632] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[  +0.004957] NFS: Registering the id_resolver key type
[  +0.000545] Key type id_resolver registered
[  +0.000401] Key type id_legacy registered
[  +0.000415] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[  +0.001704] fuse init (API version 7.23)
[  +0.001485] JFS: nTxBlock = 8192, nTxLock = 65536
[  +0.007556] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[  +0.003505] Key type big_key registered
[  +0.000494]
TEE Core Framework initialization (ver 1:0.1)
[  +0.000702] TEE armv7 Driver initialization
[  +0.000846] tz_tee_probe: name="armv7sec", id=0, pdev_name="armv7sec.0"
[  +0.000639] TEE core: Alloc the misc device "opteearmtz00" (id=0)
[  +0.000944] TEE Core: Register the misc device "opteearmtz00" (id=0,minor=62)
[  +0.006992] NET: Registered protocol family 38
[  +0.000471] Key type asymmetric registered
[  +0.000394] Asymmetric key parser 'x509' registered
[  +0.000808] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[  +0.000991] io scheduler noop registered
[  +0.000560] io scheduler deadline registered (default)
[  +0.000550] io scheduler cfq registered
[  +0.001745] phy phy-ff450000.syscon:usb2-phy@100.0: Looking up phy-supply from device tree
[  +0.000021] phy phy-ff450000.syscon:usb2-phy@100.0: Looking up phy-supply property in node /syscon@ff450000/usb2-phy@100/host-port failed
[  +0.000622] phy phy-ff450000.syscon:usb2-phy@100.1: Looking up phy-supply from device tree
[  +0.000021] phy phy-ff450000.syscon:usb2-phy@100.1: Looking up phy-supply property in node /syscon@ff450000/usb2-phy@100/otg-port failed
[  +0.000413] rockchip-usb2phy ff450000.syscon:usb2-phy@100: GPIO lookup for consumer otg-vbus
[  +0.000016] rockchip-usb2phy ff450000.syscon:usb2-phy@100: using device tree for GPIO lookup
[  +0.000042] of_get_named_gpiod_flags: parsed 'otg-vbus-gpios' property of node '/syscon@ff450000/usb2-phy@100[0]' - status (0)
[  +0.000745] rockchip-u3phy ff470000.usb3-phy: GPIO lookup for consumer vbus-drv
[  +0.000016] rockchip-u3phy ff470000.usb3-phy: using device tree for GPIO lookup
[  +0.000032] of_get_named_gpiod_flags: parsed 'vbus-drv-gpios' property of node '/usb3-phy@ff470000[0]' - status (0)
[  +0.000400] phy phy-ff470000.usb3-phy.2: Looking up phy-supply from device tree
[  +0.000018] phy phy-ff470000.usb3-phy.2: Looking up phy-supply property in node /usb3-phy@ff470000/utmi@ff470000 failed
[  +0.000521] phy phy-ff470000.usb3-phy.3: Looking up phy-supply from device tree
[  +0.000019] phy phy-ff470000.usb3-phy.3: Looking up phy-supply property in node /usb3-phy@ff470000/pipe@ff478000 failed
[  +0.001638] rockchip-u3phy ff470000.usb3-phy: Rockchip u3phy initialized successfully
[  +0.001275] phy phy-ff430000.hdmiphy.4: Looking up phy-supply from device tree
[  +0.000019] phy phy-ff430000.hdmiphy.4: Looking up phy-supply property in node /hdmiphy@ff430000 failed
[  +0.002935] rk-vcodec ff350000.vpu-service: probe device
[  +0.000540] rk-vcodec ff350000.vpu-service: vpu mmu dec ffffffc079372c10
[  +0.000919] rk-vcodec ff350000.vpu-service: allocator is drm
[  +0.000642] rk-vcodec ff350000.vpu-service: checking hw id 0
[  +0.001203] rk-vcodec ff350000.vpu-service: init success
[  +0.001300] rk-vcodec ff360000.rkvdec: probe device
[  +0.000537] rk-vcodec ff360000.rkvdec: vpu mmu dec ffffffc079373410
[  +0.000886] rk-vcodec ff360000.rkvdec: allocator is drm
[  +0.000568] rk-vcodec ff360000.rkvdec: checking hw id 3410
[  +0.001220] rk-vcodec ff360000.rkvdec: init success
[  +0.000921] probe device ff330000.h265e
[  +0.000773] mpp_dev ff330000.h265e: try to get iommu dev ffffffc079373c10
[  +0.001075] mpp_dev ff330000.h265e: resource ready, register device
[  +0.000913] probe device ff340000.vepu
[  +0.000722] mpp_dev ff340000.vepu: try to get iommu dev ffffffc079394410
[  +0.000963] rockchip_mpp_vepu_reset_init:143: No aclk reset resource define
[  +0.000672] rockchip_mpp_vepu_reset_init:148: No hclk reset resource define
[  +0.000643] mpp_dev ff340000.vepu: resource ready, register device
[  +0.003730] dma-pl330 ff1f0000.dmac: Loaded driver for PL330 DMAC-241330
[  +0.000656] dma-pl330 ff1f0000.dmac:  DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[  +0.001837] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
[  +0.003530] [drm:drm_core_init] Initialized drm 1.1.0 20060810
[  +0.003752] rockchip-vop ff370000.vop: invalid resource
[  +0.000510] rockchip-vop ff370000.vop: failed to get vop lut registers
[  +0.000631] rockchip-vop ff370000.vop: invalid resource
[  +0.000494] rockchip-vop ff370000.vop: failed to get vop cabc lut registers
[  +0.000901] rockchip-drm display-subsystem: bound ff370000.vop (ops 0xffffff8008c61338)
[  +0.001121] i2c i2c-4: of_i2c: modalias failure on /hdmi@ff3c0000/ports
[  +0.000643] dwhdmi-rockchip ff3c0000.hdmi: registered DesignWare HDMI I2C bus driver
[  +0.000817] dwhdmi-rockchip ff3c0000.hdmi: Detected HDMI TX controller v2.11a with HDCP (inno_dw_hdmi_phy2)
[  +0.001938] rockchip-drm display-subsystem: bound ff3c0000.hdmi (ops 0xffffff8008c5bd28)
[  +0.000797] [drm:drm_vblank_init] Supports vblank timestamp caching Rev 2 (21.10.2013).
[  +0.000741] [drm:drm_vblank_init] No driver support for vblank timestamp query.
[  +0.000769] rockchip-drm display-subsystem: failed to parse display resources
[  +0.277431] Console: switching to colour frame buffer device 240x67
[  +0.051027] rockchip-drm display-subsystem: fb0:  frame buffer device
[  +0.008946] Unable to detect cache hierarchy from DT for CPU 0
[  +0.002152] brd: module loaded
[  +0.010129] loop: module loaded
[  +0.001507] zram: Added device: zram0
[  +0.000851] lkdtm: No crash points registered, enable through debugfs
[  +0.002539] rockchip-spi ff190000.spi: Failed to request TX DMA channel
[  +0.000888] rockchip-spi ff190000.spi: Failed to request RX DMA channel
[  +0.001802] m25p80 spi32766.0: gd25q128 (16384 Kbytes)
[  +0.000752] 6 ofpart partitions found on MTD device spi32766.0
[  +0.000761] Creating 6 MTD partitions on "spi32766.0":
[  +0.000680] 0x000000000000-0x000000008000 : "system"
[  +0.001198] 0x000000008000-0x000000400000 : "loader"
[  +0.001105] 0x000000400000-0x0000007c0000 : "reserved"
[  +0.001129] 0x0000007c0000-0x000000800000 : "vendor"
[  +0.001136] 0x000000800000-0x000000c00000 : "uboot"
[  +0.001110] 0x000000c00000-0x000001000000 : "atf"
[  +0.002996] rk_gmac-dwmac ff540000.eth: Looking up phy-supply from device tree
[  +0.000158] rk_gmac-dwmac ff540000.eth: clock input or output? (input).
[  +0.000901] rk_gmac-dwmac ff540000.eth: TX delay(0x26).
[  +0.000698] rk_gmac-dwmac ff540000.eth: RX delay(0x11).
[  +0.000887] rk_gmac-dwmac ff540000.eth: clock input from PHY
[  +0.000746] rk_gmac-dwmac ff540000.eth: init for RGMII
[  +0.005866] stmmac - user ID: 0x10, Synopsys ID: 0x35
[  +0.000646]  Ring mode enabled
[  +0.000419]  DMA HW capability register supported
[  +0.000581]  Normal descriptors
[  +0.000467]  RX Checksum Offload Engine supported (type 2)
[  +0.000702]  TX Checksum insertion supported
[  +0.000560]  Wake-Up On Lan supported
[  +0.000537]  Enable RX Mitigation via HW Watchdog Timer
[  +0.000856] of_get_named_gpiod_flags: parsed 'snps,reset-gpio' property of node '/eth@ff540000[0]' - status (0)
[  +0.077923] libphy: stmmac: probed
[  +0.000516] eth%d: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active
[  +0.000839] eth%d: PHY ID 001cc916 at 1 IRQ POLL (stmmac-0:01)
[  +0.002048] Rockchip WiFi SYS interface (V1.00) ...
[  +0.000770] usbcore: registered new interface driver cdc_ether
[  +0.000836] usbcore: registered new interface driver rndis_host
[  +0.002743] phy phy-ff470000.usb3-phy.2: u3phy u2 power on
[  +0.000843] phy phy-ff470000.usb3-phy.3: u3phy u3 power on
[  +0.001739] dwc2 ff580000.usb: Looking up vusb_d-supply from device tree
[  +0.000020] dwc2 ff580000.usb: Looking up vusb_d-supply property in node /usb@ff580000 failed
[  +0.000017] ff580000.usb supply vusb_d not found, using dummy regulator
[  +0.001000] dwc2 ff580000.usb: Looking up vusb_a-supply from device tree
[  +0.000019] dwc2 ff580000.usb: Looking up vusb_a-supply property in node /usb@ff580000 failed
[  +0.000014] ff580000.usb supply vusb_a not found, using dummy regulator
[  +0.157108] dwc2 ff580000.usb: DWC OTG Controller
[  +0.000654] dwc2 ff580000.usb: new USB bus registered, assigned bus number 1
[  +0.011642] dwc2 ff580000.usb: irq 40, io mem 0x00000000
[  +0.011608] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[  +0.011529] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  +0.011462] usb usb1: Product: DWC OTG Controller
[  +0.011142] usb usb1: Manufacturer: Linux 4.4.77-rockchip-ayufan-136 dwc2_hsotg
[  +0.011468] usb usb1: SerialNumber: ff580000.usb
[  +0.012053] hub 1-0:1.0: USB hub found
[  +0.011235] hub 1-0:1.0: 1 port detected
[  +0.012457] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[  +0.011598] ehci-pci: EHCI PCI platform driver
[  +0.011283] ehci-platform: EHCI generic platform driver
[  +0.013783] ehci-platform ff5c0000.usb: EHCI Host Controller
[  +0.011501] ehci-platform ff5c0000.usb: new USB bus registered, assigned bus number 2
[  +0.011509] ehci-platform ff5c0000.usb: irq 41, io mem 0xff5c0000
[  +0.016863] ehci-platform ff5c0000.usb: USB 2.0 started, EHCI 1.00
[  +0.011245] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[  +0.010973] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  +0.010876] usb usb2: Product: EHCI Host Controller
[  +0.010549] usb usb2: Manufacturer: Linux 4.4.77-rockchip-ayufan-136 ehci_hcd
[  +0.010776] usb usb2: SerialNumber: ff5c0000.usb
[  +0.011488] hub 2-0:1.0: USB hub found
[  +0.010373] hub 2-0:1.0: 1 port detected
[  +0.010848] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[  +0.010397] ohci-platform: OHCI generic platform driver
[  +0.010642] ohci-platform ff5d0000.usb: Generic Platform OHCI controller
[  +0.010626] ohci-platform ff5d0000.usb: new USB bus registered, assigned bus number 3
[  +0.010541] ohci-platform ff5d0000.usb: irq 42, io mem 0xff5d0000
[  +0.064902] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[  +0.010384] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  +0.010452] usb usb3: Product: Generic Platform OHCI controller
[  +0.010313] usb usb3: Manufacturer: Linux 4.4.77-rockchip-ayufan-136 ohci_hcd
[  +0.010433] usb usb3: SerialNumber: ff5d0000.usb
[  +0.011259] hub 3-0:1.0: USB hub found
[  +0.010254] hub 3-0:1.0: 1 port detected
[  +0.011328] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
[  +0.010667] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 4
[  +0.010774] xhci-hcd xhci-hcd.8.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x00210010
[  +0.010877] xhci-hcd xhci-hcd.8.auto: irq 180, io mem 0xff600000
[  +0.010842] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[  +0.010811] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  +0.010940] usb usb4: Product: xHCI Host Controller
[  +0.010785] usb usb4: Manufacturer: Linux 4.4.77-rockchip-ayufan-136 xhci-hcd
[  +0.011068] usb usb4: SerialNumber: xhci-hcd.8.auto
[  +0.012023] hub 4-0:1.0: USB hub found
[  +0.010987] hub 4-0:1.0: 1 port detected
[  +0.011443] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
[  +0.011467] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 5
[  +0.011582] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM.
[  +0.011787] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003
[  +0.011524] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  +0.011585] usb usb5: Product: xHCI Host Controller
[  +0.011333] usb usb5: Manufacturer: Linux 4.4.77-rockchip-ayufan-136 xhci-hcd
[  +0.011674] usb usb5: SerialNumber: xhci-hcd.8.auto
[  +0.012485] hub 5-0:1.0: USB hub found
[  +0.011617] hub 5-0:1.0: 1 port detected
[  +0.013670] usbcore: registered new interface driver usbtouchscreen
[  +0.012386] i2c /dev entries driver
[  +0.014232] rk808 1-0018: Pmic Chip id: 0x8050
[  +0.012561] rk808 1-0018: source: on=0x40, off=0x00
[  +0.017072] rk808 1-0018: Looking up vcc1-supply from device tree
[  +0.000169] DCDC_REG1: supplied by vcc_sys
[  +0.011482] vcc_sys: could not add device link regulator.4 err -2
[  +0.002609] vdd_logic: 712 <--> 1450 mV at 1100 mV
[  +0.000345] reg-fixed-voltage sdmmc-regulator: Looking up vin-supply from device tree
[  +0.000039] vcc_sd: unable to resolve supply
[  +0.000029] rk808 1-0018: Looking up vcc2-supply from device tree
[  +0.000107] DCDC_REG2: supplied by vcc_sys
[  +0.011365] vcc_sys: could not add device link regulator.5 err -2
[  +0.002118] vdd_arm: 712 <--> 1450 mV at 1100 mV
[  +0.000303] reg-fixed-voltage sdmmc-regulator: Looking up vin-supply from device tree
[  +0.000036] vcc_sd: unable to resolve supply
[  +0.000029] rk808 1-0018: Looking up vcc3-supply from device tree
[  +0.000103] DCDC_REG3: supplied by vcc_sys
[  +0.011330] vcc_sys: could not add device link regulator.6 err -2
[  +0.001293] vcc_ddr: at 5000 mV
[  +0.000280] reg-fixed-voltage sdmmc-regulator: Looking up vin-supply from device tree
[  +0.000039] vcc_sd: unable to resolve supply
[  +0.000031] rk808 1-0018: Looking up vcc4-supply from device tree
[  +0.000102] DCDC_REG4: supplied by vcc_sys
[  +0.011161] vcc_sys: could not add device link regulator.7 err -2
[  +0.001298] vcc_io: 3300 mV
[  +0.000336] reg-fixed-voltage sdmmc-regulator: Looking up vin-supply from device tree
[  +0.000036] vcc_sd: supplied by vcc_io
[  +0.011245] rk808 1-0018: Looking up vcc5-supply from device tree
[  +0.000029] LDO_REG1: supplied by vcc_io
[  +0.011144] vcc_io: could not add device link regulator.8 err -2
[  +0.002418] vcc_18: 1800 mV
[  +0.000332] rk808 1-0018: Looking up vcc5-supply from device tree
[  +0.000036] LDO_REG2: supplied by vcc_io
[  +0.010993] vcc_io: could not add device link regulator.9 err -2
[  +0.002384] vcc18_emmc: 1800 mV
[  +0.000352] rk808 1-0018: Looking up vcc6-supply from device tree
[  +0.000125] LDO_REG3: supplied by vcc_sys
[  +0.010910] vcc_sys: could not add device link regulator.10 err -2
[  +0.002392] vdd_10: 1000 mV
[  +0.000344] rk808 1-0018: register rk8050 regulators
[  +0.011153] gpiochip_find_base: found new base at 510
[  +0.000161] gpiochip_add: registered GPIOs 510 to 511 on device: rk8xx-gpio
[  +0.000016] rk8xx-gpio rk8xx-gpio: register rk8050 gpio successful
[  +0.013153] input: rk8xx_pwrkey as /devices/platform/ff160000.i2c/i2c-1/1-0018/input/input0
[  +0.012522] rk808-rtc rk808-rtc: device is disabled
[  +0.011169] rk808-rtc: probe of rk808-rtc failed with error -22
[  +0.011223] rk3x-i2c ff160000.i2c: Initialized RK3xxx I2C bus at ffffff800a25a000
[  +0.013001] IR NEC protocol handler initialized
[  +0.011796] usbcore: registered new interface driver uvcvideo
[  +0.011376] USB Video Class driver (1.1.1)
[  +0.011775] rockchip-iodomain ff100000.syscon:io-domains: Looking up vccio1-supply from device tree
[  +0.000142] rockchip-iodomain ff100000.syscon:io-domains: Looking up vccio2-supply from device tree
[  +0.000628] rockchip-iodomain ff100000.syscon:io-domains: Looking up vccio3-supply from device tree
[  +0.000134] rockchip-iodomain ff100000.syscon:io-domains: Looking up vccio4-supply from device tree
[  +0.000578] rockchip-iodomain ff100000.syscon:io-domains: Looking up vccio5-supply from device tree
[  +0.000095] rockchip-iodomain ff100000.syscon:io-domains: Looking up vccio6-supply from device tree
[  +0.000084] rockchip-iodomain ff100000.syscon:io-domains: Looking up pmuio-supply from device tree
[  +0.001857] rockchip-thermal ff250000.tsadc: Missing tshut mode property, using default (cru)
[  +0.011864] rockchip-thermal ff250000.tsadc: Missing tshut-polarity property, using default (low)
[  +0.013505] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[  +0.012045] Bluetooth: Virtual HCI driver ver 1.5
[  +0.012069] Bluetooth: HCI UART driver ver 2.3
[  +0.011612] Bluetooth: HCI UART protocol H4 registered
[  +0.011501] Bluetooth: HCI UART protocol LL registered
[  +0.011367] Bluetooth: HCI UART protocol ATH3K registered
[  +0.011522] usbcore: registered new interface driver bfusb
[  +0.011496] usbcore: registered new interface driver btusb
[  +0.011488] cpu cpu0: Looking up cpu-supply from device tree
[  +0.000680] cpu cpu0: Looking up cpu-supply from device tree
[  +0.000236] cpu cpu0: Looking up cpu-supply from device tree
[  +0.002009] sdhci: Secure Digital Host Controller Interface driver
[  +0.011348] sdhci: Copyright(c) Pierre Ossman
[  +0.011362] Synopsys Designware Multimedia Card Interface Driver
[  +0.012452] dwmmc_rockchip ff520000.rksdmmc: IDMAC supports 32-bit address mode.
[  +0.007304] dwmmc_rockchip ff520000.rksdmmc: Using internal DMA controller.
[  +0.007130] dwmmc_rockchip ff520000.rksdmmc: Version ID is 270a
[  +0.006990] dwmmc_rockchip ff520000.rksdmmc: DW MMC controller at irq 37,32 bit host data width,256 deep fifo
[  +0.007423] dwmmc_rockchip ff520000.rksdmmc: Looking up vmmc-supply from device tree
[  +0.000092] dwmmc_rockchip ff520000.rksdmmc: Looking up vqmmc-supply from device tree
[  +0.000574] dwmmc_rockchip ff520000.rksdmmc: GPIO lookup for consumer wp
[  +0.000009] dwmmc_rockchip ff520000.rksdmmc: using device tree for GPIO lookup
[  +0.000012] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/rksdmmc@ff520000[0]'
[  +0.000009] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/rksdmmc@ff520000[0]'
[  +0.000008] dwmmc_rockchip ff520000.rksdmmc: using lookup tables for GPIO lookup
[  +0.000008] dwmmc_rockchip ff520000.rksdmmc: lookup for GPIO wp failed
[  +0.010831] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[  +0.018035] dwmmc_rockchip ff520000.rksdmmc: 1 slots initialized
[  +0.008008] dwmmc_rockchip ff500000.rksdmmc: IDMAC supports 32-bit address mode.
[  +0.008927] dwmmc_rockchip ff500000.rksdmmc: Using internal DMA controller.
[  +0.008716] dwmmc_rockchip ff500000.rksdmmc: Version ID is 270a
[  +0.008695] dwmmc_rockchip ff500000.rksdmmc: DW MMC controller at irq 38,32 bit host data width,256 deep fifo
[  +0.009244] dwmmc_rockchip ff500000.rksdmmc: Looking up vmmc-supply from device tree
[  +0.000189] dwmmc_rockchip ff500000.rksdmmc: Looking up vqmmc-supply from device tree
[  +0.000092] dwmmc_rockchip ff500000.rksdmmc: GPIO lookup for consumer cd
[  +0.000009] dwmmc_rockchip ff500000.rksdmmc: using device tree for GPIO lookup
[  +0.000055] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/rksdmmc@ff500000[0]' - status (0)
[  +0.000038] dwmmc_rockchip ff500000.rksdmmc: Got CD GPIO
[  +0.007201] dwmmc_rockchip ff500000.rksdmmc: GPIO lookup for consumer wp
[  +0.000009] dwmmc_rockchip ff500000.rksdmmc: using device tree for GPIO lookup
[  +0.000011] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/rksdmmc@ff500000[0]'
[  +0.000008] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/rksdmmc@ff500000[0]'
[  +0.000008] dwmmc_rockchip ff500000.rksdmmc: using lookup tables for GPIO lookup
[  +0.000009] dwmmc_rockchip ff500000.rksdmmc: lookup for GPIO wp failed
[  +0.010769] mmc_host mmc0: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0)
[  +0.007691] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[  +0.018570] dwmmc_rockchip ff500000.rksdmmc: 1 slots initialized
[  +0.007440] sdhci-pltfm: SDHCI platform and OF driver helper
[  +0.007641] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/standby-led[0]' - status (0)
[  +0.000674] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/power-led[0]' - status (0)
[  +0.000188] of_get_named_gpiod_flags: parsed 'gpios' property of node '/switches/usb-switch[0]' - status (0)
[  +0.000234] hidraw: raw HID events driver (C) Jiri Kosina
[  +0.007274] mmc_host mmc0: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0)
[  +0.008119] usbcore: registered new interface driver usbhid
[  +0.007309] usbhid: USB HID core driver
[  +0.008603] usbcore: registered new interface driver snd-usb-audio
[  +0.007469] rk3328-codec ff410000.codec: spk_depop_time use default value.
[  +0.010101] u32 classifier
[  +0.005709] Netfilter messages via NETLINK v0.30.
[  +0.005838] ip_set: protocol 6
[  +0.005659] mmc_host mmc0: Bus speed (slot 0) = 100000Hz (slot req 100000Hz, actual 100000HZ div = 0)
[  +0.006531] Initializing XFRM netlink socket
[  +0.006284] NET: Registered protocol family 10
[  +0.006861] NET: Registered protocol family 17
[  +0.005772] NET: Registered protocol family 15
[  +0.005371] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
[  +0.000061] mmc1: new SDHC card at address 0001
[  +0.000583] mmcblk1: mmc1:0001 ASTC 7.32 GiB
[  +0.009743]  mmcblk1: p1 p2 p3 p4 p5 p6 p7
[  +0.013377] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[  +0.006702] Bridge firewalling registered
[  +0.006022] Bluetooth: RFCOMM socket layer initialized
[  +0.006049] Bluetooth: RFCOMM ver 1.11
[  +0.005841] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[  +0.006126] Bluetooth: HIDP socket layer initialized
[  +0.006119] 8021q: 802.1Q VLAN Support v1.8
[  +0.006045] [WLAN_RFKILL]: Enter rfkill_wlan_init
[  +0.006303] [BT_RFKILL]: Enter rfkill_rk_init
[  +0.006270] Key type dns_resolver registered
[  +0.006681] Registered cp15_barrier emulation handler
[  +0.006272] Registered setend emulation handler
[  +0.006842] registered taskstats version 1
[  +0.008000] Btrfs loaded, integrity-checker=on
[  +0.006193] BTRFS: selftest: Running btrfs free space cache tests
[  +0.006212] BTRFS: selftest: Running extent only tests
[  +0.006083] BTRFS: selftest: Running bitmap only tests
[  +0.005984] BTRFS: selftest: Running bitmap and extent tests
[  +0.005961] BTRFS: selftest: Running space stealing from bitmap to extent
[  +0.006915] BTRFS: selftest: Free space cache tests finished
[  +0.005927] BTRFS: selftest: Running extent buffer operation tests
[  +0.000640] BTRFS: selftest: Running btrfs_split_item tests
[  +0.011175] BTRFS: selftest: Running find delalloc tests
[  +0.007817] vendor storage:20160801 ret = 0
[  +0.209324] BTRFS: selftest: Running btrfs_get_extent tests
[  +0.006000] BTRFS: selftest: Running hole first btrfs_get_extent test
[  +0.006156] BTRFS: selftest: Running outstanding_extents tests
[  +0.006184] BTRFS: selftest: Running qgroup tests
[  +0.005729] BTRFS: selftest: Qgroup basic add
[  +0.005694] BTRFS: selftest: Qgroup multiple refs test
[  +0.017232] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/hdmi-sound[0]'
[  +0.000012] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/hdmi-sound[0]'
[  +0.000434] asoc-simple-card hdmi-sound: i2s-hifi <-> ff000000.i2s mapping ok
[  +0.007199] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/sound[0]'
[  +0.000011] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/sound[0]'
[  +0.020444] asoc-simple-card sound: rk3328-hifi <-> ff010000.i2s mapping ok
[  +0.006440] asoc-simple-card sound: snd-soc-dummy-dai <-> ff010000.i2s mapping ok
[  +0.007257] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/spdif-sound[0]'
[  +0.000012] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/spdif-sound[0]'
[  +0.000385] asoc-simple-card spdif-sound: dit-hifi <-> ff030000.spdif mapping ok
[  +0.006867] hctosys: unable to open rtc device (rtc0)
[  +0.025175] rockchip-pm-domain ff100000.syscon:power-controller: failed to get ack on domain 'pd_video', val=0x10040
[  +0.016550] rockchip-pm-domain ff100000.syscon:power-controller: failed to get ack on domain 'pd_vpu', val=0x10040
[  +0.006372] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 414; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '-a58dd56', rk_ko_ver is '5', built at '09:12:53', on 'Oct 12 2017'.
[  +0.007764] mali-utgard ff300000.gpu: mali_platform_device->num_resources = 9
[  +0.006353] mali-utgard ff300000.gpu: resource[0].start = 0x0x00000000ff300000
[  +0.006360] mali-utgard ff300000.gpu: resource[1].start = 0x0x00000000ff300000
[  +0.006312] mali-utgard ff300000.gpu: resource[2].start = 0x0x0000000000000011
[  +0.006288] mali-utgard ff300000.gpu: resource[3].start = 0x0x0000000000000012
[  +0.006199] mali-utgard ff300000.gpu: resource[4].start = 0x0x0000000000000013
[  +0.006118] mali-utgard ff300000.gpu: resource[5].start = 0x0x0000000000000014
[  +0.005955] mali-utgard ff300000.gpu: resource[6].start = 0x0x0000000000000015
[  +0.005956] mali-utgard ff300000.gpu: resource[7].start = 0x0x0000000000000016
[  +0.005835] mali-utgard ff300000.gpu: resource[8].start = 0x0x0000000000000017
[  +0.005783] D : [File] : drivers/gpu/arm/mali400/mali/platform/rk/rk.c; [Line] : 518; [Func] : mali_platform_device_init(); to add platform_specific_data to platform_device_of_mali.
[  +0.006929] mali-utgard ff300000.gpu: Looking up mali-supply from device tree
[  +0.001940] Mali: Mali device driver loaded
[  +0.007103] ALSA device list:
[  +0.005587]   #0: HDMI
[  +0.005427]   #1: I2S
[  +0.005401]   #2: SPDIF
[  +0.005977] Freeing unused kernel memory: 1152K (ffffff8008fb0000 - ffffff80090d0000)
[  +0.040290] systemd-udevd[167]: starting version 215
[  +0.007097] random: systemd-udevd: uninitialized urandom read (16 bytes read, 11 bits of entropy available)
[  +4.029640] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +5.232001] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +0.217936] usb 5-1: device not accepting address 2, error -62
[  +5.398060] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +5.232007] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +0.217931] usb 5-1: device not accepting address 3, error -62
[  +5.398064] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +5.232003] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +0.217953] usb 5-1: device not accepting address 4, error -62
[  +5.398048] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[Mar22 16:19] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +0.217947] usb 5-1: device not accepting address 5, error -62
[  +0.038120] usb usb5-port1: unable to enumerate USB device
[  +0.167266] random: lvm: uninitialized urandom read (4 bytes read, 35 bits of entropy available)
[  +5.761521] EXT4-fs (mmcblk1p7): 1 orphan inode deleted
[  +0.017385] EXT4-fs (mmcblk1p7): recovery complete
[  +0.031326] EXT4-fs (mmcblk1p7): mounted filesystem with writeback data mode. Opts: (null)
[  +0.418662] random: systemd: uninitialized urandom read (16 bytes read, 76 bits of entropy available)
[  +0.025239] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[  +0.019799] systemd[1]: Detected architecture 'arm64'.
[  +0.122377] systemd[1]: Failed to insert module 'autofs4'
[  +0.034377] systemd[1]: Set hostname to <rock64>.
[  +0.195535] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 82 bits of entropy available)
[  +0.260618] random: systemd: uninitialized urandom read (16 bytes read, 87 bits of entropy available)
[  +0.014977] random: systemd: uninitialized urandom read (16 bytes read, 87 bits of entropy available)
[  +0.014711] random: systemd: uninitialized urandom read (16 bytes read, 87 bits of entropy available)
[  +0.033760] random: systemd: uninitialized urandom read (16 bytes read, 88 bits of entropy available)
[  +0.008743] random: systemd: uninitialized urandom read (16 bytes read, 88 bits of entropy available)
[  +0.008393] random: systemd: uninitialized urandom read (16 bytes read, 88 bits of entropy available)
[  +0.383956] systemd[1]: Cannot add dependency job for unit syncthing-inotify@syncthing.service, ignoring: Unit syncthing-inotify@syncthing.service failed to load: No such file or directory.
[  +0.021343] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[  +0.023774] systemd[1]: Expecting device dev-ttyFIQ0.device...
[  +0.008965] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[  +0.009136] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[  +0.007445] systemd[1]: Starting Remote File Systems (Pre).
[  +0.007401] systemd[1]: Reached target Remote File Systems (Pre).
[  +0.007828] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[  +0.007330] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[  +0.007301] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[  +0.007223] systemd[1]: Starting Swap.
[  +0.006893] systemd[1]: Reached target Swap.
[  +0.006962] systemd[1]: Expecting device dev-disk-by\x2did-ata\x2dWDC_WD3201ABYS\x2d01B9A0_WD\x2dWCARW3198910\x2dpart1.device...
[  +0.007836] systemd[1]: Starting Root Slice.
[  +0.007544] systemd[1]: Created slice Root Slice.
[  +0.007199] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[  +0.007357] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[  +0.007536] systemd[1]: Starting Delayed Shutdown Socket.
[  +0.007003] systemd[1]: Listening on Delayed Shutdown Socket.
[  +0.006848] systemd[1]: Starting Journal Socket (/dev/log).
[  +0.006844] systemd[1]: Listening on Journal Socket (/dev/log).
[  +0.006933] systemd[1]: Starting Device-mapper event daemon FIFOs.
[  +0.006937] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[  +0.007160] systemd[1]: Starting LVM2 metadata daemon socket.
[  +0.007031] systemd[1]: Listening on LVM2 metadata daemon socket.
[  +0.007208] systemd[1]: Starting udev Control Socket.
[  +0.007061] systemd[1]: Listening on udev Control Socket.
[  +0.007168] systemd[1]: Starting udev Kernel Socket.
[  +0.007108] systemd[1]: Listening on udev Kernel Socket.
[  +0.006991] systemd[1]: Starting User and Session Slice.
[  +0.006864] systemd[1]: Created slice User and Session Slice.
[  +0.006899] systemd[1]: Starting Journal Socket.
[  +0.006799] systemd[1]: Listening on Journal Socket.
[  +0.006932] systemd[1]: Starting System Slice.
[  +0.006878] systemd[1]: Created slice System Slice.
[  +0.006896] systemd[1]: Starting Increase datagram queue length...
[  +0.008506] systemd[1]: Starting system-systemd\x2dfsck.slice.
[  +0.007172] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[  +0.006978] systemd[1]: Starting Restore / save the current clock...
[  +0.011717] systemd[1]: Starting Nameserver information manager...
[  +0.008695] systemd[1]: Mounting POSIX Message Queue File System...
[  +0.008727] systemd[1]: Mounting Huge Pages File System...
[  +0.008539] systemd[1]: Starting udev Coldplug all Devices...
[  +0.040357] systemd[1]: Started Set Up Additional Binary Formats.
[  +0.021567] systemd[1]: Starting Load Kernel Modules...
[  +0.008699] systemd[1]: Mounting Debug File System...
[  +0.008921] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[  +0.013036] systemd[1]: Starting system-syncthing.slice.
[  +0.007045] systemd[1]: Created slice system-syncthing.slice.
[  +0.006747] systemd[1]: Starting system-openvpn.slice.
[  +0.006942] systemd[1]: Created slice system-openvpn.slice.
[  +0.006576] systemd[1]: Starting system-getty.slice.
[  +0.006678] systemd[1]: Created slice system-getty.slice.
[  +0.006547] systemd[1]: Starting system-serial\x2dgetty.slice.
[  +0.006664] systemd[1]: Created slice system-serial\x2dgetty.slice.
[  +0.006586] systemd[1]: Starting Remount Root and Kernel File Systems...
[  +0.008097] systemd[1]: Starting Slices.
[  +0.006043] systemd[1]: Reached target Slices.
[  +0.005999] systemd[1]: Expecting device dev-disk-by\x2dlabel-boot.device...
[  +0.007829] systemd[1]: Mounted Debug File System.
[  +0.006200] systemd[1]: Mounted Huge Pages File System.
[  +0.006227] systemd[1]: Mounted POSIX Message Queue File System.
[  +0.007135] systemd[1]: Started Increase datagram queue length.
[  +0.007684] systemd[1]: Started Restore / save the current clock.
[  +0.012570] systemd[1]: Started Load Kernel Modules.
[  +0.008449] systemd[1]: Started Create list of required static device nodes for the current kernel.
[  +0.007978] systemd[1]: Started Remount Root and Kernel File Systems.
[  +0.009700] systemd[1]: Started Nameserver information manager.
[  +0.011094] systemd[1]: Started udev Coldplug all Devices.
[  +0.006414] systemd[1]: Time has been changed
[  +0.113623] systemd[1]: Starting udev Wait for Complete Device Initialization...
[  +0.023662] systemd[1]: Starting Initial Check File System Quotas...
[  +0.022082] systemd[1]: Started Various fixups to make systemd work better on Debian.
[  +0.007229] systemd[1]: Starting Load/Save Random Seed...
[  +0.009164] systemd[1]: Starting Create Static Device Nodes in /dev...
[  +0.018727] systemd[1]: Mounting FUSE Control File System...
[  +0.008157] systemd[1]: Starting Apply Kernel Variables...
[  +0.008334] systemd[1]: Mounting Configuration File System...
[  +0.008317] systemd[1]: Starting Syslog Socket.
[  +0.005844] systemd[1]: Listening on Syslog Socket.
[  +0.005494] systemd[1]: Starting Journal Service...
[  +0.008001] systemd[1]: Started Journal Service.
[  +0.193257] systemd-udevd[307]: starting version 215
[  +0.939317] FAT-fs (mmcblk1p6): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[  +0.037239] FAT-fs (mmcblk1p6): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[  +0.164158] random: nonblocking pool is initialized
[Mar22 16:20] systemd-journald[299]: Received request to flush runtime journal from PID 1
[  +0.177517] ip_tables: (C) 2000-2006 Netfilter Core Team
[  +0.054259] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[  +1.558183] rk_gmac-dwmac ff540000.eth: rk_get_eth_addr: mac address: 1e:c5:ec:5c:8f:fa
[  +0.016678] eth0: device MAC address 1e:c5:ec:5c:8f:fa
[  +4.079531] rk_gmac-dwmac ff540000.eth eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[  +7.840300] tun: Universal TUN/TAP device driver, 1.6
[  +0.007079] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>

HD Power-off:
*nothing

HD Power-on:

[Mar22 16:23] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +5.216053] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +0.201958] usb 5-1: device not accepting address 6, error -62
[Mar22 16:24] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +5.216189] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +0.201928] usb 5-1: device not accepting address 7, error -62
[  +5.382123] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +5.216133] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +0.201905] usb 5-1: device not accepting address 8, error -62
[  +5.382216] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +5.216043] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +0.201981] usb 5-1: device not accepting address 9, error -62
[  +0.022164] usb usb5-port1: unable to enumerate USB device
[  +5.391885] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +5.216201] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +0.201957] usb 5-1: device not accepting address 10, error -62
[  +5.382145] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +5.216083] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +0.201957] usb 5-1: device not accepting address 11, error -62
[  +5.382134] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[Mar22 16:25] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +0.200954] usb 5-1: device not accepting address 12, error -62
[  +5.383231] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +5.216131] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +0.201945] usb 5-1: device not accepting address 13, error -62
[  +0.022121] usb usb5-port1: unable to enumerate USB device
[  +5.392033] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +5.216103] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +0.201913] usb 5-1: device not accepting address 14, error -62
[  +5.382211] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +5.216077] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +0.201942] usb 5-1: device not accepting address 15, error -62
[  +5.382177] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +5.216114] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +0.201903] usb 5-1: device not accepting address 16, error -62
[  +5.382169] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +5.216366] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +0.201667] usb 5-1: device not accepting address 17, error -62
[  +0.022122] usb usb5-port1: unable to enumerate USB device
[Mar22 16:26] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +5.216146] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +0.201840] usb 5-1: device not accepting address 18, error -62
[  +5.382240] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +5.216106] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +0.201919] usb 5-1: device not accepting address 19, error -62
[  +5.382203] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +5.215937] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +0.200970] usb 5-1: device not accepting address 20, error -62
[  +5.383271] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +5.216000] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +0.206924] usb 5-1: device not accepting address 21, error -62
[  +0.027075] usb usb5-port1: unable to enumerate USB device
[  +5.398181] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +5.232111] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +0.218831] usb 5-1: device not accepting address 22, error -62
[  +5.397266] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[Mar22 16:27] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +0.218833] usb 5-1: device not accepting address 23, error -62

Power-off:

[  +0.218902] usb 5-1: Device not responding to setup address.
[  +0.206961] usb 5-1: device not accepting address 27, error -71
[  +0.006192] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.006302] usb usb5-port1: cannot disable (err = -32)
[  +2.921692] usb usb5-port1: Cannot enable. Maybe the USB cable is bad?
[  +0.018301] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.018369] usb usb5-port1: cannot disable (err = -32)
[  +2.521335] usb usb5-port1: Cannot enable. Maybe the USB cable is bad?
[  +0.018283] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.018482] usb usb5-port1: cannot disable (err = -32)
[  +0.018223] usb usb5-port1: unable to enumerate USB device
[  +0.006374] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.006270] usb usb5-port1: cannot disable (err = -32)
[  +3.442481] usb usb5-port1: Cannot enable. Maybe the USB cable is bad?
[  +0.018007] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.019230] usb usb5-port1: cannot disable (err = -32)
[  +2.520785] usb usb5-port1: Cannot enable. Maybe the USB cable is bad?
[  +0.017978] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.018518] usb usb5-port1: cannot disable (err = -32)
[  +2.521607] usb usb5-port1: Cannot enable. Maybe the USB cable is bad?
[  +0.017984] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.018508] usb usb5-port1: cannot disable (err = -32)
[  +2.521477] usb usb5-port1: Cannot enable. Maybe the USB cable is bad?
[  +0.018106] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.018305] usb usb5-port1: cannot disable (err = -32)
[  +2.521665] usb usb5-port1: Cannot enable. Maybe the USB cable is bad?
[  +0.018099] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.018300] usb usb5-port1: cannot disable (err = -32)
[  +0.018399] usb usb5-port1: unable to enumerate USB device
[  +0.006376] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.006184] usb usb5-port1: cannot disable (err = -32)
[Mar22 16:28] usb usb5-port1: Cannot enable. Maybe the USB cable is bad?
[  +0.017092] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.013000] usb usb5-port1: cannot disable (err = -32)
[  +2.525905] usb usb5-port1: Cannot enable. Maybe the USB cable is bad?
[  +0.017978] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.019059] usb usb5-port1: cannot disable (err = -32)
[  +2.520008] usb usb5-port1: Cannot enable. Maybe the USB cable is bad?
[  +0.018091] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.018715] usb usb5-port1: cannot disable (err = -32)
[  +2.532246] usb usb5-port1: Cannot enable. Maybe the USB cable is bad?
[  +0.018080] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.018706] usb usb5-port1: cannot disable (err = -32)
[  +2.529223] usb usb5-port1: Cannot enable. Maybe the USB cable is bad?
[  +0.006213] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.006156] usb usb5-port1: cannot disable (err = -32)
[  +0.006069] usb usb5-port1: unable to enumerate USB device
[  +0.006128] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.006116] usb usb5-port1: cannot disable (err = -32)

Power-on:

[  +1.982541] usb 5-1: new SuperSpeed USB device number 50 using xhci-hcd
[  +0.017804] usb 5-1: New USB device found, idVendor=174c, idProduct=55aa
[  +0.006027] usb 5-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[  +0.006017] usb 5-1: Product: External HDD
[  +0.005786] usb 5-1: Manufacturer: 01234567890123456789012345678901234567890123
[  +0.000007] usb 5-1: SerialNumber: 201308070213
[  +0.054472] usb-storage 5-1:1.0: USB Mass Storage device detected
[  +0.007789] usb-storage 5-1:1.0: Quirks match for vid 174c pid 55aa: 400000
[  +0.006204] scsi host0: usb-storage 5-1:1.0
[  +0.007704] usbcore: registered new interface driver usb-storage
[  +0.010628] usbcore: registered new interface driver uas
[Mar22 16:29] scsi 0:0:0:0: Direct-Access     WDC WD32 01ABYS-01B9A0    13.0 PQ: 0 ANSI: 5
[  +0.008819] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[  +0.006626] sd 0:0:0:0: [sda] Write Protect is off
[  +0.005948] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
[  +0.000468] sd 0:0:0:0: [sda] No Caching mode page found
[  +0.005943] sd 0:0:0:0: [sda] Assuming drive cache: write through
[  +0.067591]  sda: sda1
[  +0.007358] sd 0:0:0:0: [sda] Attached SCSI disk
[  +0.542894] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: user_xattr,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,acl

[dkryder]

maybe go back to earlier release version to see if that works for you.

[f5Qz]

Looks like a similar problem: #123

[f5Qz]

Anyone any ideas how to fix this?

jessie-openmediavault-rock64-0.5.15-136-armhf.img

Turning on and off the hard drive a few times makes it work. But is should recognise on boot obviously...

[  +0.006130] usb usb5-port1: cannot disable (err = -32)
[  +1.222895] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.007061] usb usb5-port1: cannot disable (err = -32)
[  +1.301986] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.006539] usb usb5-port1: cannot disable (err = -32)
[Mar27 20:26] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.006334] usb usb5-port1: cannot disable (err = -32)
[ +22.915402] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.000997] usb usb5-port1: cannot disable (err = -32)
[ +25.746442] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.000975] usb usb5-port1: cannot disable (err = -32)
[Mar27 20:27] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.000993] usb usb5-port1: cannot disable (err = -32)
[Mar27 20:28] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.000994] usb usb5-port1: cannot disable (err = -32)
[Mar27 20:29] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.000973] usb usb5-port1: cannot disable (err = -32)
[ +19.414341] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.000826] usb usb5-port1: cannot disable (err = -32)
[Mar27 20:30] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.000975] usb usb5-port1: cannot disable (err = -32)
[Mar27 20:31] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.000989] usb usb5-port1: cannot disable (err = -32)
[Mar27 20:33] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.000625] usb usb5-port1: cannot disable (err = -32)
[Mar27 20:34] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.000662] usb usb5-port1: cannot disable (err = -32)
[ +41.853443] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.001120] usb usb5-port1: cannot disable (err = -32)
[Mar27 20:35] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.001126] usb usb5-port1: cannot disable (err = -32)
[ +29.718343] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.000927] usb usb5-port1: cannot disable (err = -32)
[  +1.204267] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.001954] usb usb5-port1: cannot disable (err = -32)
[  +9.059169] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.001089] usb usb5-port1: cannot disable (err = -32)
[Mar27 20:36] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.001125] usb usb5-port1: cannot disable (err = -32)
[Mar27 20:37] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.001346] usb usb5-port1: cannot disable (err = -32)
[Mar27 20:38] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.001323] usb usb5-port1: cannot disable (err = -32)
[  +1.196744] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.001487] usb usb5-port1: cannot disable (err = -32)
[ +38.355296] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.001314] usb usb5-port1: cannot disable (err = -32)
[Mar27 20:40] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.001371] usb usb5-port1: cannot disable (err = -32)
[ +29.995103] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.001101] usb usb5-port1: cannot disable (err = -32)
[Mar27 20:41] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.001330] usb usb5-port1: cannot disable (err = -32)
[ +19.989129] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.001335] usb usb5-port1: cannot disable (err = -32)
[Mar27 20:42] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.001341] usb usb5-port1: cannot disable (err = -32)
[  +1.202664] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.018718] usb usb5-port1: cannot disable (err = -32)
[Mar27 20:44] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.019053] usb usb5-port1: cannot disable (err = -32)
[ +40.660799] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.018685] usb usb5-port1: cannot disable (err = -32)
[Mar27 20:46] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.019019] usb usb5-port1: cannot disable (err = -32)
[Mar27 20:47] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.006564] usb usb5-port1: cannot disable (err = -32)
[Mar27 20:48] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.018923] usb usb5-port1: cannot disable (err = -32)
[Mar27 20:49] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.019101] usb usb5-port1: cannot disable (err = -32)
[ +16.277967] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.006342] usb usb5-port1: cannot disable (err = -32)
[Mar27 21:30] xhci-hcd xhci-hcd.8.auto: port 0 resume PLC timeout
[  +5.742867] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +5.232322] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +0.218864] usb 5-1: device not accepting address 2, error -62
[Mar27 21:31] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +5.232182] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +0.207003] usb 5-1: device not accepting address 3, error -62
[  +5.409325] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +0.207016] usb 5-1: Device not responding to setup address.
[  +0.206919] usb 5-1: device not accepting address 4, error -71
[  +0.006232] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.006210] usb usb5-port1: cannot disable (err = -32)
[  +5.365865] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +5.216288] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +0.207000] usb 5-1: device not accepting address 5, error -62
[  +0.027109] usb usb5-port1: unable to enumerate USB device
[ +18.534735] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +5.216250] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +0.206943] usb 5-1: device not accepting address 6, error -62
[  +5.395727] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +5.229836] xhci-hcd xhci-hcd.8.auto: Timeout while waiting for setup device command
[  +0.218966] usb 5-1: device not accepting address 7, error -62
[  +0.018411] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  +0.018858] usb usb5-port1: cannot disable (err = -32)
[Mar27 21:32] usb 5-1: new SuperSpeed USB device number 8 using xhci-hcd
[  +0.029930] usb 5-1: New USB device found, idVendor=174c, idProduct=55aa
[  +0.018513] usb 5-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[  +0.013358] usb 5-1: Product: External HDD
[  +0.006015] usb 5-1: Manufacturer: 01234567890123456789012345678901234567890123
[  +0.006308] usb 5-1: SerialNumber: 201308070213
[  +0.059266] usb-storage 5-1:1.0: USB Mass Storage device detected
[  +0.007795] usb-storage 5-1:1.0: Quirks match for vid 174c pid 55aa: 400000
[  +0.006389] scsi host0: usb-storage 5-1:1.0
[  +0.006746] usbcore: registered new interface driver usb-storage
[  +0.010794] usbcore: registered new interface driver uas
[  +6.364552] scsi 0:0:0:0: Direct-Access     WDC WD32 01ABYS-01B9A0    13.0 PQ: 0 ANSI: 5
[  +0.007974] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[  +0.007000] sd 0:0:0:0: [sda] Write Protect is off
[  +0.006170] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
[  +0.000435] sd 0:0:0:0: [sda] No Caching mode page found
[  +0.006158] sd 0:0:0:0: [sda] Assuming drive cache: write through
[  +0.080574]  sda: sda1
[  +0.007636] sd 0:0:0:0: [sda] Attached SCSI disk
[  +1.791350] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: user_xattr,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,acl
[Mar27 21:33] ip6_tables: (C) 2000-2006 Netfilter Core Team

[f5Qz]

I bought another external HD (WD Elements Desktop) but there seems the be the same problem.

So it isnt a problem with this specific external HD.

Any help?

EDIT1:

As is this post: https://forum.pine64.org/showthread.php?tid=5456&pid=34403#pid34403

With the stretch-minimal-rock64-0.6.28-197-arm64.img image the usb harddrive seems to be working without problems.

EDIT2:
It only seems to work on initial boot. After second boot same problem...

[ +16.277967] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[ +0.006342] usb usb5-port1: cannot disable (err = -32)

[f5Qz]

I followed these steps: https://forum.pine64.org/showthread.php?tid=5137&pid=32107#pid32107

I added "options usb-storage quirks=0x174c:0x55aa:u" to /etc/modprobe.d/rk3328-usb-storage-quirks.conf. But it is still doesnt work without turning on and off the hard drive on USB 3.0.

Connecting the ExternalHD to the USB2.0 port works immediately.

I'm on: jessie-openmediavault-rock64-0.6.30-208-armhf.img

root@rock64:~# dmesg -wH

[Apr 4 11:48] Booting Linux on physical CPU 0x0
[  +0.000000] Initializing cgroup subsys cpuset
[  +0.000000] Initializing cgroup subsys cpu
[  +0.000000] Initializing cgroup subsys cpuacct
[  +0.000000] Linux version 4.4.120-rockchip-ayufan-208 (root@612d9be805e8) (gcc version 7.2.0 (Ubuntu/Linaro 7.2.0-6ubuntu1) ) #1 SMP Sun Apr 1 18:26:21 UTC 2018
[  +0.000000] Boot CPU: AArch64 Processor [410fd034]
[  +0.000000] On node 0 totalpages: 523776
[  +0.000000]   DMA zone: 8184 pages used for memmap
[  +0.000000]   DMA zone: 0 pages reserved
[  +0.000000]   DMA zone: 523776 pages, LIFO batch:31
[  +0.000000] psci: probing for conduit method from DT.
[  +0.000000] psci: PSCIv1.0 detected in firmware.
[  +0.000000] psci: Using standard PSCI v0.2 function IDs
[  +0.000000] psci: MIGRATE_INFO_TYPE not supported.
[  +0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc07ff3c000 s46248 r8192 d31576 u86016
[  +0.000000] pcpu-alloc: s46248 r8192 d31576 u86016 alloc=21*4096
[  +0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[  +0.000000] Detected VIPT I-cache on CPU0
[  +0.000000] CPU features: enabling workaround for ARM erratum 845719
[  +0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 515592
[  +0.000000] Kernel command line: earlyprintk=uart8250-32bit,0xff130000 rw root=LABEL=linux-root rootwait rootfstype=ext4 panic=10 init=/sbin/init coherent_pool=1M ethaddr=1e:c5:ec:5c:8f:fa eth1addr=1e:c5:ec:5c:8f:1a serial=87d9cb75058e39e cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1
[  +0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[  +0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[  +0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[  +0.000000] software IO TLB [mem 0x79400000-0x7d400000] (64MB) mapped at [ffffffc079400000-ffffffc07d3fffff]
[  +0.000000] Memory: 1967804K/2095104K available (11838K kernel code, 1574K rwdata, 4328K rodata, 1152K init, 752K bss, 127300K reserved, 0K cma-reserved)
[  +0.000000] Virtual kernel memory layout:
                  modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
                  vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000   (   246 GB)
                    .init : 0xffffff8009050000 - 0xffffff8009170000   (  1152 KB)
                    .text : 0xffffff8008080000 - 0xffffff8008c10000   ( 11840 KB)
                  .rodata : 0xffffff8008c10000 - 0xffffff8009050000   (  4352 KB)
                    .data : 0xffffff8009170000 - 0xffffff80092f9808   (  1575 KB)
                  vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8 GB maximum)
                            0xffffffbdc0008000 - 0xffffffbdc2000000   (    31 MB actual)
                  fixed   : 0xffffffbffe7fb000 - 0xffffffbffec00000   (  4116 KB)
                  PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000   (    16 MB)
                  memory  : 0xffffffc000200000 - 0xffffffc080000000   (  2046 MB)
[  +0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[  +0.000000] Hierarchical RCU implementation.
[  +0.000000]   Build-time adjustment of leaf fanout to 64.
[  +0.000000]   RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[  +0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[  +0.000000] NR_IRQS:64 nr_irqs:64 0
[  +0.000000] GIC: Using split EOI/Deactivate mode
[  +0.000000] rockchip_mmc_get_phase: invalid clk rate
[  +0.000000] rockchip_mmc_get_phase: invalid clk rate
[  +0.000000] rockchip_mmc_get_phase: invalid clk rate
[  +0.000000] rockchip_mmc_get_phase: invalid clk rate
[  +0.000000] rockchip_mmc_get_phase: invalid clk rate
[  +0.000000] rockchip_mmc_get_phase: invalid clk rate
[  +0.000000] rockchip_mmc_get_phase: invalid clk rate
[  +0.000000] rockchip_mmc_get_phase: invalid clk rate
[  +0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[  +0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[  +0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[  +0.001115] Console: colour dummy device 80x25
[  +0.001983] console [tty0] enabled
[  +0.000058] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
[  +0.000084] pid_max: default: 32768 minimum: 301
[  +0.000195] Security Framework initialized
[  +0.000046] Yama: becoming mindful.
[  +0.000066] AppArmor: AppArmor disabled by boot time parameter
[  +0.000102] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[  +0.000050] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[  +0.001004] Initializing cgroup subsys io
[  +0.000062] Initializing cgroup subsys memory
[  +0.000074] Initializing cgroup subsys devices
[  +0.000053] Initializing cgroup subsys freezer
[  +0.000052] Initializing cgroup subsys net_cls
[  +0.000049] Initializing cgroup subsys perf_event
[  +0.000052] Initializing cgroup subsys net_prio
[  +0.000057] Initializing cgroup subsys hugetlb
[  +0.000049] Initializing cgroup subsys pids
[  +0.000089] ftrace: allocating 44508 entries in 174 pages
[  +0.128638] sched-energy: CPU device node has no sched-energy-costs
[  +0.000070] Invalid sched_group_energy for CPU0
[  +0.000041] CPU0: update cpu_capacity 1024
[  +0.000111] ASID allocator initialised with 32768 entries
[  +0.006258] Detected VIPT I-cache on CPU1
[  +0.000074] Invalid sched_group_energy for CPU1
[  +0.000007] CPU1: update cpu_capacity 1024
[  +0.000005] CPU1: Booted secondary processor [410fd034]
[  +0.000779] Detected VIPT I-cache on CPU2
[  +0.000053] Invalid sched_group_energy for CPU2
[  +0.000007] CPU2: update cpu_capacity 1024
[  +0.000004] CPU2: Booted secondary processor [410fd034]
[  +0.000746] Detected VIPT I-cache on CPU3
[  +0.000052] Invalid sched_group_energy for CPU3
[  +0.000005] CPU3: update cpu_capacity 1024
[  +0.000005] CPU3: Booted secondary processor [410fd034]
[  +0.000115] Brought up 4 CPUs
[  +0.000462] SMP: Total of 4 processors activated.
[  +0.000050] CPU: All CPU(s) started at EL2
[  +0.000077] alternatives: patching kernel code
[  +0.000324] Invalid sched_group_energy for CPU3
[  +0.000048] Invalid sched_group_energy for Cluster3
[  +0.000040] Invalid sched_group_energy for CPU2
[  +0.000040] Invalid sched_group_energy for Cluster2
[  +0.000041] Invalid sched_group_energy for CPU1
[  +0.000041] Invalid sched_group_energy for Cluster1
[  +0.000041] Invalid sched_group_energy for CPU0
[  +0.000040] Invalid sched_group_energy for Cluster0
[  +0.001014] devtmpfs: initialized
[  +0.022222] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[  +0.000115] futex hash table entries: 1024 (order: 4, 65536 bytes)
[  +0.000712] xor: measuring software checksum speed
[  +0.010024]    8regs     :  1080.000 MB/sec
[  +0.010083]    8regs_prefetch:   968.000 MB/sec
[  +0.010083]    32regs    :  1456.000 MB/sec
[  +0.010085]    32regs_prefetch:  1224.000 MB/sec
[  +0.000043] xor: using function: 32regs (1456.000 MB/sec)
[  +0.000073] pinctrl core: initialized pinctrl subsystem
[  +0.000482] regulator-dummy: no parameters
[  +0.001100] NET: Registered protocol family 16
[  +0.004551] cpuidle: using governor ladder
[  +0.004028] cpuidle: using governor menu
[  +0.000062] Registered FIQ tty driver
[  +0.000766] vdso: 2 pages (1 code @ ffffff8008c16000, 1 data @ ffffff8009174000)
[  +0.000104] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[  +0.000732] DMA: preallocated 1024 KiB pool for atomic allocations
[  +0.019041] gpiochip_add_data: registered GPIOs 0 to 31 on device: gpio0
[  +0.000153] gpiochip_add_data: registered GPIOs 32 to 63 on device: gpio1
[  +0.000133] gpiochip_add_data: registered GPIOs 64 to 95 on device: gpio2
[  +0.000146] gpiochip_add_data: registered GPIOs 96 to 127 on device: gpio3
[  +0.051286] raid6: int64x1  gen()   191 MB/s
[  +0.017014] raid6: int64x1  xor()   142 MB/s
[  +0.017175] raid6: int64x2  gen()   316 MB/s
[  +0.017115] raid6: int64x2  xor()   242 MB/s
[  +0.017168] raid6: int64x4  gen()   472 MB/s
[  +0.017106] raid6: int64x4  xor()   312 MB/s
[  +0.017205] raid6: int64x8  gen()   386 MB/s
[  +0.017213] raid6: int64x8  xor()   304 MB/s
[  +0.017211] raid6: neonx1   gen()   351 MB/s
[  +0.017105] raid6: neonx1   xor()   316 MB/s
[  +0.017241] raid6: neonx2   gen()   539 MB/s
[  +0.017123] raid6: neonx2   xor()   445 MB/s
[  +0.017155] raid6: neonx4   gen()   742 MB/s
[  +0.017166] raid6: neonx4   xor()   556 MB/s
[  +0.017208] raid6: neonx8   gen()   761 MB/s
[  +0.017153] raid6: neonx8   xor()   566 MB/s
[  +0.000044] raid6: using algorithm neonx8 gen() 761 MB/s
[  +0.000040] raid6: .... xor() 566 MB/s, rmw enabled
[  +0.000041] raid6: using intx1 recovery algorithm
[  +0.000593] mpp venc_srv: mpp_probe enter
[  +0.000072] mpp venc_srv: init success
[  +0.000428] rockchip-pm rockchip-suspend: not set sleep mode config
[  +0.000049] rockchip-pm rockchip-suspend: not set wakeup-config
[  +0.000047] rockchip-pm rockchip-suspend: not set pwm-regulator-config
[  +0.001086] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc-phy-regulator[0]'
[  +0.000052] vcc_phy: no parameters
[  +0.000327] reg-fixed-voltage vcc-phy-regulator: vcc_phy supplying 0uV
[  +0.000095] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc-sys[0]'
[  +0.000030] vcc_sys: 5000 mV
[  +0.000348] reg-fixed-voltage vcc-sys: vcc_sys supplying 5000000uV
[  +0.000388] of_get_named_gpiod_flags: parsed 'gpio' property of node '/sdmmc-regulator[0]' - status (0)
[  +0.000081] reg-fixed-voltage sdmmc-regulator: Looking up vin-supply from device tree
[  +0.000024] vcc_sd: unable to resolve supply
[  +0.000014] vcc_sd: 3300 mV
[  +0.000254] reg-fixed-voltage sdmmc-regulator: Looking up vin-supply from device tree
[  +0.000024] vcc_sd: regulator get failed, ret=-517
[  +0.000094] reg-fixed-voltage sdmmc-regulator: Looking up vin-supply from device tree
[  +0.000022] vcc_sd: unable to resolve supply
[  +0.000017] reg-fixed-voltage sdmmc-regulator: vcc_sd supplying 3300000uV
[  +0.000299] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc-host-5v-regulator[0]' - status (0)
[  +0.000068] reg-fixed-voltage vcc-host-5v-regulator: Looking up vin-supply from device tree
[  +0.000062] vcc_host_5v: supplied by vcc_sys
[  +0.000052] vcc_sys: could not add device link regulator.4 err -2
[  +0.000084] vcc_host_5v: at 5000 mV
[  +0.000331] reg-fixed-voltage sdmmc-regulator: Looking up vin-supply from device tree
[  +0.000027] vcc_sd: unable to resolve supply
[  +0.000018] reg-fixed-voltage vcc-host-5v-regulator: vcc_host_5v supplying 0uV
[  +0.000333] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc-host1-5v-regulator[0]' - status (0)
[  +0.000069] reg-fixed-voltage vcc-host1-5v-regulator: Looking up vin-supply from device tree
[  +0.000058] vcc_host1_5v: supplied by vcc_sys
[  +0.000054] vcc_sys: could not add device link regulator.5 err -2
[  +0.000072] vcc_host1_5v: at 5000 mV
[  +0.000301] reg-fixed-voltage sdmmc-regulator: Looking up vin-supply from device tree
[  +0.000027] vcc_sd: unable to resolve supply
[  +0.000018] reg-fixed-voltage vcc-host1-5v-regulator: vcc_host1_5v supplying 0uV
[  +0.000983] iommu: Adding device ff350000.vpu_service to group 0
[  +0.000149] iommu: Adding device ff351000.avsd to group 1
[  +0.000174] iommu: Adding device ff360000.rkvdec to group 2
[  +0.000129] iommu: Adding device ff330000.h265e to group 3
[  +0.000124] iommu: Adding device ff340000.vepu to group 4
[  +0.000136] iommu: Adding device ff370000.vop to group 5
[  +0.000139] iommu: Adding device ff3a0000.iep to group 6
[  +0.001249] rk_iommu ff360480.iommu: can't get aclk
[  +0.000063] rk_iommu ff360480.iommu: can't get hclk
[  +0.001966] SCSI subsystem initialized
[  +0.000416] usbcore: registered new interface driver usbfs
[  +0.000122] usbcore: registered new interface driver hub
[  +0.000189] usbcore: registered new device driver usb
[  +0.000202] media: Linux media interface: v0.10
[  +0.000098] Linux video capture interface: v2.00
[  +0.000164] pps_core: LinuxPPS API ver. 1 registered
[  +0.000068] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[  +0.000103] PTP clock support registered
[  +0.002080] Advanced Linux Sound Architecture Driver Initialized.
[  +0.001040] Bluetooth: Core ver 2.21
[  +0.000102] NET: Registered protocol family 31
[  +0.000041] Bluetooth: HCI device and connection manager initialized
[  +0.000055] Bluetooth: HCI socket layer initialized
[  +0.000048] Bluetooth: L2CAP socket layer initialized
[  +0.000082] Bluetooth: SCO socket layer initialized
[  +0.000832] NetLabel: Initializing
[  +0.000045] NetLabel:  domain hash size = 128
[  +0.000039] NetLabel:  protocols = UNLABELED CIPSOv4
[  +0.000109] NetLabel:  unlabeled traffic allowed by default
[  +0.000682] rockchip-cpuinfo cpuinfo: Serial          : 87d9cb75058e39e1
[  +0.001340] clocksource: Switched to clocksource arch_sys_counter
[  +0.106827] NET: Registered protocol family 2
[  +0.000960] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[  +0.000373] TCP bind hash table entries: 16384 (order: 7, 524288 bytes)
[  +0.000758] TCP: Hash tables configured (established 16384 bind 16384)
[  +0.000290] UDP hash table entries: 1024 (order: 4, 98304 bytes)
[  +0.000193] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes)
[  +0.000553] NET: Registered protocol family 1
[  +0.000723] RPC: Registered named UNIX socket transport module.
[  +0.000054] RPC: Registered udp transport module.
[  +0.000039] RPC: Registered tcp transport module.
[  +0.000041] RPC: Registered tcp NFSv4.1 backchannel transport module.
[  +0.000068] PCI: CLS 0 bytes, default 64
[  +0.000378] Trying to unpack rootfs image as initramfs...
[  +0.380299] Freeing initrd memory: 4928K
[  +0.001303] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[  +0.001697] kvm [1]: 8-bit VMID
[  +0.000045] kvm [1]: Hyp mode initialized successfully
[  +0.000581] kvm [1]: interrupt-controller@ff814000 IRQ46
[  +0.000426] kvm [1]: timer IRQ3
[  +0.004303] audit: initializing netlink subsys (disabled)
[  +0.000143] audit: type=2000 audit(0.990:1): initialized
[  +0.001386] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[  +0.013523] VFS: Disk quotas dquot_6.6.0
[  +0.000354] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[  +0.003203] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[  +0.002364] NFS: Registering the id_resolver key type
[  +0.000137] Key type id_resolver registered
[  +0.000042] Key type id_legacy registered
[  +0.000067] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[  +0.001247] fuse init (API version 7.23)
[  +0.001412] JFS: nTxBlock = 8192, nTxLock = 65536
[  +0.010138] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[  +0.003189] Key type big_key registered
[  +0.000166]
              TEE Core Framework initialization (ver 1:0.1)
[  +0.000109] TEE armv7 Driver initialization
[  +0.000666] tz_tee_probe: name="armv7sec", id=0, pdev_name="armv7sec.0"
[  +0.000052] TEE core: Alloc the misc device "opteearmtz00" (id=0)
[  +0.000420] TEE Core: Register the misc device "opteearmtz00" (id=0,minor=62)
[  +0.005823] NET: Registered protocol family 38
[  +0.000116] Key type asymmetric registered
[  +0.000052] Asymmetric key parser 'x509' registered
[  +0.000425] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[  +0.000346] io scheduler noop registered
[  +0.000056] io scheduler deadline registered (default)
[  +0.000117] io scheduler cfq registered
[  +0.001889] phy phy-ff450000.syscon:usb2-phy@100.0: Looking up phy-supply from device tree
[  +0.000172] vcc_host1_5v: could not add device link phy-ff450000.syscon:usb2-phy@100.0 err -2
[  +0.000662] phy phy-ff450000.syscon:usb2-phy@100.1: Looking up phy-supply from device tree
[  +0.000167] vcc_host1_5v: could not add device link phy-ff450000.syscon:usb2-phy@100.1 err -2
[  +0.000542] phy phy-ff450000.syscon:usb2-phy@100.1: Looking up vbus-supply from device tree
[  +0.000023] phy phy-ff450000.syscon:usb2-phy@100.1: Looking up vbus-supply property in node /syscon@ff450000/usb2-phy@100/otg-port failed
[  +0.000027] phy phy-ff450000.syscon:usb2-phy@100.1: Failed to get VBUS supply regulator
[  +0.001149] rockchip-u3phy ff470000.usb3-phy: Looking up vbus-supply from device tree
[  +0.000026] rockchip-u3phy ff470000.usb3-phy: Looking up vbus-supply property in node /usb3-phy@ff470000 failed
[  +0.000028] rockchip-u3phy ff470000.usb3-phy: Failed to get VBUS supply regulator
[  +0.000565] phy phy-ff470000.usb3-phy.2: Looking up phy-supply from device tree
[  +0.000020] phy phy-ff470000.usb3-phy.2: Looking up phy-supply property in node /usb3-phy@ff470000/utmi@ff470000 failed
[  +0.000495] phy phy-ff470000.usb3-phy.3: Looking up phy-supply from device tree
[  +0.000021] phy phy-ff470000.usb3-phy.3: Looking up phy-supply property in node /usb3-phy@ff470000/pipe@ff478000 failed
[  +0.001804] rockchip-u3phy ff470000.usb3-phy: Rockchip u3phy initialized successfully
[  +0.000807] phy phy-ff430000.hdmiphy.4: Looking up phy-supply from device tree
[  +0.000021] phy phy-ff430000.hdmiphy.4: Looking up phy-supply property in node /hdmiphy@ff430000 failed
[  +0.003268] rk-vcodec vpu_combo: Looking up vcodec-supply from device tree
[  +0.000025] rk-vcodec vpu_combo: Looking up vcodec-supply property in node /vpu_combo failed
[  +0.000024] rk-vcodec vpu_combo: no regulator for vcodec
[  +0.000396] rk-vcodec vpu_combo: failed on clk_get clk_cabac
[  +0.000060] rk-vcodec vpu_combo: failed on clk_get clk_core
[  +0.000136] platform ff350000.vpu_service: probe device
[  +0.000108] platform ff350000.vpu_service: vpu mmu dec ffffffc078834810
[  +0.000463] platform ff350000.vpu_service: allocator is drm
[  +0.000138] platform ff350000.vpu_service: checking hw id 0
[  +0.001095] platform ff351000.avsd: probe device
[  +0.000176] platform ff351000.avsd: vpu mmu dec ffffffc078834810
[  +0.000455] platform ff351000.avsd: allocator is drm
[  +0.000098] platform ff351000.avsd: checking hw id 6731
[  +0.002339] rk-vcodec vpu_combo: could not find power_model node
[  +0.000061] rk-vcodec vpu_combo: init success
[  +0.000496] rk-vcodec ff360000.rkvdec: Looking up vcodec-supply from device tree
[  +0.000038] rk-vcodec ff360000.rkvdec: vcodec regulator not ready, retry
[  +0.001110] probe device ff330000.h265e
[  +0.000467] mpp_dev ff330000.h265e: try to get iommu dev ffffffc078836410
[  +0.000613] mpp_dev ff330000.h265e: resource ready, register device
[  +0.000662] probe device ff340000.vepu
[  +0.000454] mpp_dev ff340000.vepu: try to get iommu dev ffffffc078836c10
[  +0.000512] mpp_dev ff340000.vepu: resource ready, register device
[  +0.003600] dma-pl330 ff1f0000.dmac: Loaded driver for PL330 DMAC-241330
[  +0.000066] dma-pl330 ff1f0000.dmac:  DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[  +0.001321] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
[  +0.003192] ff130000.serial: ttyS2 at MMIO 0xff130000 (irq = 13, base_baud = 1500000) is a 16550A
[  +0.118813] console [ttyS2] enabled
[  +0.002191] [drm] Initialized drm 1.1.0 20060810
[  +0.004426] [drm] Rockchip DRM driver version: v1.0.0
[  +0.000823] rockchip-drm display-subsystem: devfreq is not set
[  +0.001096] rockchip-vop ff370000.vop: invalid resource
[  +0.000532] rockchip-vop ff370000.vop: failed to get vop lut registers
[  +0.000614] rockchip-vop ff370000.vop: invalid resource
[  +0.000514] rockchip-vop ff370000.vop: failed to get vop cabc lut registers
[  +0.001000] rockchip-drm display-subsystem: bound ff370000.vop (ops 0xffffff8008cdc448)
[  +0.001240] i2c i2c-4: of_i2c: modalias failure on /hdmi@ff3c0000/ports
[  +0.000659] dwhdmi-rockchip ff3c0000.hdmi: registered DesignWare HDMI I2C bus driver
[  +0.000905] dwhdmi-rockchip ff3c0000.hdmi: Detected HDMI TX controller v2.11a with HDCP (inno_dw_hdmi_phy2)
[  +0.002278] rockchip-drm display-subsystem: bound ff3c0000.hdmi (ops 0xffffff8008cd3310)
[  +0.000821] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[  +0.000619] [drm] No driver support for vblank timestamp query.
[  +0.000687] rockchip-drm display-subsystem: failed to parse display resources
[  +0.227641] rockchip-vop ff370000.vop: [drm:vop_crtc_enable] Update mode to 1920*1080
[  +0.088289] Console: switching to colour frame buffer device 240x67
[  +0.068350] rockchip-drm display-subsystem: fb0:  frame buffer device
[  +0.007665] usbcore: registered new interface driver udl
[  +0.004030] Unable to detect cache hierarchy for CPU 0
[  +0.002734] brd: module loaded
[  +0.012158] loop: module loaded
[  +0.001031] lkdtm: No crash points registered, enable through debugfs
[  +0.003398] rockchip-spi ff190000.spi: no high_speed pinctrl state
[  +0.002123] m25p80 spi32766.0: gd25q128 (16384 Kbytes)
[  +0.000781] 2 ofpart partitions found on MTD device spi32766.0
[  +0.000785] Creating 2 MTD partitions on "spi32766.0":
[  +0.000698] 0x000000008000-0x000000400000 : "loader"
[  +0.002691] 0x0000007c0000-0x000000800000 : "vendor"
[  +0.005660] force_sf_dma_mode is ignored if force_thresh_dma_mode is set.
[  +0.000986] rk_gmac-dwmac ff540000.ethernet: Looking up phy-supply from device tree
[  +0.000223] rk_gmac-dwmac ff540000.ethernet: clock input or output? (input).
[  +0.000953] rk_gmac-dwmac ff540000.ethernet: TX delay(0x24).
[  +0.000764] rk_gmac-dwmac ff540000.ethernet: RX delay(0x18).
[  +0.000776] rk_gmac-dwmac ff540000.ethernet: integrated PHY? (no).
[  +0.001063] rk_gmac-dwmac ff540000.ethernet: cannot get clock clk_mac_speed
[  +0.000924] rk_gmac-dwmac ff540000.ethernet: clock input from PHY
[  +0.005829] rk_gmac-dwmac ff540000.ethernet: init for RGMII
[  +0.000925] stmmac - user ID: 0x10, Synopsys ID: 0x35
[  +0.000676]  Ring mode enabled
[  +0.000422]  DMA HW capability register supported
[  +0.000595]  Normal descriptors
[  +0.000470]  RX Checksum Offload Engine supported (type 2)
[  +0.000707]  Wake-Up On Lan supported
[  +0.000571]  Enable RX Mitigation via HW Watchdog Timer
[  +0.000949] of_get_named_gpiod_flags: parsed 'snps,reset-gpio' property of node '/ethernet@ff540000[0]' - status (0)
[  +0.075262] libphy: stmmac: probed
[  +0.000529] eth%d: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active
[  +0.000840] eth%d: PHY ID 001cc916 at 1 IRQ POLL (stmmac-0:01)
[  +0.002838] Rockchip WiFi SYS interface (V1.00) ...
[  +0.000912] usbcore: registered new interface driver cdc_ether
[  +0.000860] usbcore: registered new interface driver rndis_host
[  +0.003523] phy phy-ff470000.usb3-phy.2: u3phy u2 power on
[  +0.000801] phy phy-ff470000.usb3-phy.3: u3phy u3 power on
[  +0.002239] dwc2 ff580000.usb: Looking up vusb_d-supply from device tree
[  +0.000029] dwc2 ff580000.usb: Looking up vusb_d-supply property in node /usb@ff580000 failed
[  +0.000028] ff580000.usb supply vusb_d not found, using dummy regulator
[  +0.000993] dwc2 ff580000.usb: Looking up vusb_a-supply from device tree
[  +0.000019] dwc2 ff580000.usb: Looking up vusb_a-supply property in node /usb@ff580000 failed
[  +0.000018] ff580000.usb supply vusb_a not found, using dummy regulator
[  +0.013707] dwc2 ff580000.usb: DWC OTG Controller
[  +0.000751] dwc2 ff580000.usb: new USB bus registered, assigned bus number 1
[  +0.001015] dwc2 ff580000.usb: irq 43, io mem 0xff580000
[  +0.001067] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[  +0.012827] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  +0.012691] usb usb1: Product: DWC OTG Controller
[  +0.012306] usb usb1: Manufacturer: Linux 4.4.120-rockchip-ayufan-208 dwc2_hsotg
[  +0.012588] usb usb1: SerialNumber: ff580000.usb
[  +0.013577] hub 1-0:1.0: USB hub found
[  +0.012531] hub 1-0:1.0: 1 port detected
[  +0.014016] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[  +0.012803] ehci-pci: EHCI PCI platform driver
[  +0.012497] ehci-platform: EHCI generic platform driver
[  +0.015353] ehci-platform ff5c0000.usb: EHCI Host Controller
[  +0.013151] ehci-platform ff5c0000.usb: new USB bus registered, assigned bus number 2
[  +0.013193] ehci-platform ff5c0000.usb: irq 44, io mem 0xff5c0000
[  +0.017746] ehci-platform ff5c0000.usb: USB 2.0 started, EHCI 1.00
[  +0.012834] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[  +0.012538] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  +0.012493] usb usb2: Product: EHCI Host Controller
[  +0.012161] usb usb2: Manufacturer: Linux 4.4.120-rockchip-ayufan-208 ehci_hcd
[  +0.012337] usb usb2: SerialNumber: ff5c0000.usb
[  +0.013214] hub 2-0:1.0: USB hub found
[  +0.011994] hub 2-0:1.0: 1 port detected
[  +0.012636] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[  +0.012045] ohci-platform: OHCI generic platform driver
[  +0.012564] ohci-platform ff5d0000.usb: Generic Platform OHCI controller
[  +0.012519] ohci-platform ff5d0000.usb: new USB bus registered, assigned bus number 3
[  +0.012224] ohci-platform ff5d0000.usb: irq 45, io mem 0xff5d0000
[  +0.066683] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[  +0.011756] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  +0.011659] usb usb3: Product: Generic Platform OHCI controller
[  +0.011590] usb usb3: Manufacturer: Linux 4.4.120-rockchip-ayufan-208 ohci_hcd
[  +0.011783] usb usb3: SerialNumber: ff5d0000.usb
[  +0.012824] hub 3-0:1.0: USB hub found
[  +0.011630] hub 3-0:1.0: 1 port detected
[  +0.013182] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
[  +0.012135] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 4
[  +0.012118] xhci-hcd xhci-hcd.9.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x00210010
[  +0.012042] xhci-hcd xhci-hcd.9.auto: irq 181, io mem 0xff600000
[  +0.011904] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[  +0.011837] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  +0.011829] usb usb4: Product: xHCI Host Controller
[  +0.011535] usb usb4: Manufacturer: Linux 4.4.120-rockchip-ayufan-208 xhci-hcd
[  +0.011849] usb usb4: SerialNumber: xhci-hcd.9.auto
[  +0.012949] hub 4-0:1.0: USB hub found
[  +0.011871] hub 4-0:1.0: 1 port detected
[  +0.012389] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
[  +0.012353] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 5
[  +0.012503] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM.
[  +0.012640] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003
[  +0.012345] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  +0.012397] usb usb5: Product: xHCI Host Controller
[  +0.012176] usb usb5: Manufacturer: Linux 4.4.120-rockchip-ayufan-208 xhci-hcd
[  +0.012519] usb usb5: SerialNumber: xhci-hcd.9.auto
[  +0.013549] hub 5-0:1.0: USB hub found
[  +0.012389] hub 5-0:1.0: 1 port detected
[  +0.015099] usbcore: registered new interface driver iforce
[  +0.012637] usbcore: registered new interface driver xpad
[  +0.012931] usbcore: registered new interface driver usbtouchscreen
[  +0.013808] i2c /dev entries driver
[  +0.015734] rk808 1-0018: Pmic Chip id: 0x8050
[  +0.013450] rk808 1-0018: source: on=0x40, off=0x00
[  +0.019031] rk808 1-0018: Looking up vcc1-supply from device tree
[  +0.000236] DCDC_REG1: supplied by vcc_sys
[  +0.012338] vcc_sys: could not add device link regulator.6 err -2
[  +0.002698] vdd_logic: 712 <--> 1450 mV at 1100 mV
[  +0.000588] reg-fixed-voltage sdmmc-regulator: Looking up vin-supply from device tree
[  +0.000064] vcc_sd: unable to resolve supply
[  +0.000041] rk808 1-0018: Looking up vcc2-supply from device tree
[  +0.000199] DCDC_REG2: supplied by vcc_sys
[  +0.012105] vcc_sys: could not add device link regulator.7 err -2
[  +0.002189] vdd_arm: 712 <--> 1450 mV at 1100 mV
[  +0.000568] reg-fixed-voltage sdmmc-regulator: Looking up vin-supply from device tree
[  +0.000063] vcc_sd: unable to resolve supply
[  +0.000041] rk808 1-0018: Looking up vcc3-supply from device tree
[  +0.000250] DCDC_REG3: supplied by vcc_sys
[  +0.012030] vcc_sys: could not add device link regulator.8 err -2
[  +0.001353] vcc_ddr: at 5000 mV
[  +0.000556] reg-fixed-voltage sdmmc-regulator: Looking up vin-supply from device tree
[  +0.000057] vcc_sd: unable to resolve supply
[  +0.000041] rk808 1-0018: Looking up vcc4-supply from device tree
[  +0.000197] DCDC_REG4: supplied by vcc_sys
[  +0.011883] vcc_sys: could not add device link regulator.9 err -2
[  +0.001367] vcc_io: 3300 mV
[  +0.000549] reg-fixed-voltage sdmmc-regulator: Looking up vin-supply from device tree
[  +0.000057] vcc_sd: supplied by vcc_io
[  +0.012019] rk808 1-0018: Looking up vcc5-supply from device tree
[  +0.000053] LDO_REG1: supplied by vcc_io
[  +0.011736] vcc_io: could not add device link regulator.10 err -2
[  +0.002474] vdd_18: 1800 mV
[  +0.001055] rk808 1-0018: Looking up vcc5-supply from device tree
[  +0.000062] LDO_REG2: supplied by vcc_io
[  +0.011585] vcc_io: could not add device link regulator.11 err -2
[  +0.002481] vcc18_emmc: 1800 mV
[  +0.001056] rk808 1-0018: Looking up vcc6-supply from device tree
[  +0.000238] LDO_REG3: supplied by vcc_sys
[  +0.011551] vcc_sys: could not add device link regulator.12 err -2
[  +0.002486] vdd_10: 1000 mV
[  +0.001096] rk808 1-0018: register rk8050 regulators
[  +0.011948] gpiochip_find_base: found new base at 510
[  +0.000216] gpiochip_add_data: registered GPIOs 510 to 511 on device: rk8xx-gpio
[  +0.000018] rk8xx-gpio rk8xx-gpio: register rk8050 gpio successful
[  +0.014023] input: rk8xx_pwrkey as /devices/platform/ff160000.i2c/i2c-1/1-0018/input/input0
[  +0.022781] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0
[  +0.012977] rk3x-i2c ff160000.i2c: Initialized RK3xxx I2C bus at ffffff800a334000
[  +0.014430] IR NEC protocol handler initialized
[  +0.011872] IR RC5(x/sz) protocol handler initialized
[  +0.011849] IR RC6 protocol handler initialized
[  +0.011693] IR JVC protocol handler initialized
[  +0.011669] IR Sony protocol handler initialized
[  +0.011652] IR SANYO protocol handler initialized
[  +0.011577] IR Sharp protocol handler initialized
[  +0.011521] IR MCE Keyboard/mouse protocol handler initialized
[  +0.000014] IR XMP protocol handler initialized
[  +0.001035] usbcore: registered new interface driver uvcvideo
[  +0.000006] USB Video Class driver (1.1.1)
[  +0.000771] rockchip-iodomain ff100000.syscon:io-domains: Looking up vccio1-supply from device tree
[  +0.000194] rockchip-iodomain ff100000.syscon:io-domains: Looking up vccio2-supply from device tree
[  +0.000801] rockchip-iodomain ff100000.syscon:io-domains: Looking up vccio3-supply from device tree
[  +0.000127] rockchip-iodomain ff100000.syscon:io-domains: Looking up vccio4-supply from device tree
[  +0.000596] rockchip-iodomain ff100000.syscon:io-domains: Looking up vccio5-supply from device tree
[  +0.000087] rockchip-iodomain ff100000.syscon:io-domains: Looking up vccio6-supply from device tree
[  +0.000136] rockchip-iodomain ff100000.syscon:io-domains: Looking up pmuio-supply from device tree
[  +0.005551] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[  +0.000025] Bluetooth: Virtual HCI driver ver 1.5
[  +0.000221] Bluetooth: HCI UART driver ver 2.3
[  +0.000010] Bluetooth: HCI UART protocol H4 registered
[  +0.000004] Bluetooth: HCI UART protocol LL registered
[  +0.000005] Bluetooth: HCI UART protocol ATH3K registered
[  +0.000187] usbcore: registered new interface driver bfusb
[  +0.000118] usbcore: registered new interface driver btusb
[  +0.000541] cpu cpu0: cpu_leakage=9
[  +0.000041] cpu cpu0: cpu_leakage=9
[  +0.000020] cpu cpu0: cpu_leakage-volt-sel=1
[  +0.000070] cpu cpu0: Looking up cpu-supply from device tree
[  +0.000878] cpu cpu0: Looking up cpu-supply from device tree
[  +0.000293] cpu cpu0: Looking up cpu-supply from device tree
[  +0.002458] sdhci: Secure Digital Host Controller Interface driver
[  +0.000004] sdhci: Copyright(c) Pierre Ossman
[  +0.000010] Synopsys Designware Multimedia Card Interface Driver
[  +0.002011] dwmmc_rockchip ff520000.dwmmc: IDMAC supports 32-bit address mode.
[  +0.000058] dwmmc_rockchip ff520000.dwmmc: Using internal DMA controller.
[  +0.000017] dwmmc_rockchip ff520000.dwmmc: Version ID is 270a
[  +0.000102] dwmmc_rockchip ff520000.dwmmc: DW MMC controller at irq 40,32 bit host data width,256 deep fifo
[  +0.000037] dwmmc_rockchip ff520000.dwmmc: 'clock-freq-min-max' property was deprecated.
[  +0.000021] dwmmc_rockchip ff520000.dwmmc: Looking up vmmc-supply from device tree
[  +0.000167] dwmmc_rockchip ff520000.dwmmc: Looking up vqmmc-supply from device tree
[  +0.000795] dwmmc_rockchip ff520000.dwmmc: GPIO lookup for consumer wp
[  +0.000009] dwmmc_rockchip ff520000.dwmmc: using device tree for GPIO lookup
[  +0.000016] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@ff520000[0]'
[  +0.000010] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@ff520000[0]'
[  +0.000007] dwmmc_rockchip ff520000.dwmmc: using lookup tables for GPIO lookup
[  +0.000012] dwmmc_rockchip ff520000.dwmmc: lookup for GPIO wp failed
[  +0.011250] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[  +0.011099] dwmmc_rockchip ff520000.dwmmc: 1 slots initialized
[  +0.001124] dwmmc_rockchip ff500000.dwmmc: IDMAC supports 32-bit address mode.
[  +0.000062] dwmmc_rockchip ff500000.dwmmc: Using internal DMA controller.
[  +0.000016] dwmmc_rockchip ff500000.dwmmc: Version ID is 270a
[  +0.000091] dwmmc_rockchip ff500000.dwmmc: DW MMC controller at irq 41,32 bit host data width,256 deep fifo
[  +0.000038] dwmmc_rockchip ff500000.dwmmc: 'clock-freq-min-max' property was deprecated.
[  +0.000017] dwmmc_rockchip ff500000.dwmmc: Looking up vmmc-supply from device tree
[  +0.000220] dwmmc_rockchip ff500000.dwmmc: Looking up vqmmc-supply from device tree
[  +0.000135] dwmmc_rockchip ff500000.dwmmc: GPIO lookup for consumer cd
[  +0.000009] dwmmc_rockchip ff500000.dwmmc: using device tree for GPIO lookup
[  +0.000015] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/dwmmc@ff500000[0]'
[  +0.000012] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/dwmmc@ff500000[0]'
[  +0.000008] dwmmc_rockchip ff500000.dwmmc: using lookup tables for GPIO lookup
[  +0.000009] dwmmc_rockchip ff500000.dwmmc: lookup for GPIO cd failed
[  +0.000014] dwmmc_rockchip ff500000.dwmmc: GPIO lookup for consumer wp
[  +0.000008] dwmmc_rockchip ff500000.dwmmc: using device tree for GPIO lookup
[  +0.000010] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@ff500000[0]'
[  +0.000010] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@ff500000[0]'
[  +0.000007] dwmmc_rockchip ff500000.dwmmc: using lookup tables for GPIO lookup
[  +0.000009] dwmmc_rockchip ff500000.dwmmc: lookup for GPIO wp failed
[  +0.011157] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[  +0.011089] dwmmc_rockchip ff500000.dwmmc: 1 slots initialized
[  +0.000323] sdhci-pltfm: SDHCI platform and OF driver helper
[  +0.001005] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/standby-led[0]' - status (0)
[  +0.000870] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/power-led[0]' - status (0)
[  +0.000441] of_get_named_gpiod_flags: parsed 'gpios' property of node '/switches/usb-switch[0]' - status (0)
[  +0.000640] hidraw: raw HID events driver (C) Jiri Kosina
[  +0.001632] usbcore: registered new interface driver usbhid
[  +0.000006] usbhid: USB HID core driver
[  +0.000555] ashmem: initialized
[  +0.001778] rockchip-dmc dmc: Looking up center-supply from device tree
[  +0.000396] rockchip-dmc dmc: unable to get devfreq-event device : dfi
[  +0.003724] usbcore: registered new interface driver snd-usb-audio
[  +0.002793] rk3328-codec ff410000.codec: spk_depop_time use default value.
[  +0.005933] rockchip-pinctrl pinctrl: pin gpio0-27 already requested by vcc-host1-5v-regulator; cannot claim for ff030000.spdif
[  +0.000015] rockchip-pinctrl pinctrl: pin-27 (ff030000.spdif) status -22
[  +0.000014] rockchip-pinctrl pinctrl: could not request pin 27 (gpio0-27) from group spdifm0-tx  on device rockchip-pinctrl
[  +0.000008] rockchip-spdif ff030000.spdif: Error applying setting, reverse things back
[  +0.002465] u32 classifier
[  +0.000025] Netfilter messages via NETLINK v0.30.
[  +0.000107] ip_set: protocol 6
[  +0.000377] Initializing XFRM netlink socket
[  +0.001238] NET: Registered protocol family 10
[  +0.002344] NET: Registered protocol family 17
[  +0.000048] NET: Registered protocol family 15
[  +0.000134] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[  +0.000051] Bridge firewalling registered
[  +0.000248] Bluetooth: RFCOMM socket layer initialized
[  +0.000106] Bluetooth: RFCOMM ver 1.11
[  +0.000029] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[  +0.000017] Bluetooth: HIDP socket layer initialized
[  +0.000114] 8021q: 802.1Q VLAN Support v1.8
[  +0.000052] [WLAN_RFKILL]: Enter rfkill_wlan_init
[  +0.000645] [BT_RFKILL]: Enter rfkill_rk_init
[  +0.000428] Key type dns_resolver registered
[  +0.002083] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
[  +0.000171] mmc1: new SDHC card at address 0001
[  +0.000351] Registered cp15_barrier emulation handler
[  +0.000025] Registered setend emulation handler
[  +0.001028] mmcblk1: mmc1:0001 ASTC 7.32 GiB
[  +0.000778] registered taskstats version 1
[  +0.004388] Btrfs loaded, integrity-checker=on
[  +0.000195] BTRFS: selftest: Running btrfs free space cache tests
[  +0.000048] BTRFS: selftest: Running extent only tests
[  +0.000032] BTRFS: selftest: Running bitmap only tests
[  +0.000036] BTRFS: selftest: Running bitmap and extent tests
[  +0.000051] BTRFS: selftest: Running space stealing from bitmap to extent
[  +0.001778] BTRFS: selftest: Free space cache tests finished
[  +0.000008] BTRFS: selftest: Running extent buffer operation tests
[  +0.000000] BTRFS: selftest: Running btrfs_split_item tests
[  +0.000097] BTRFS: selftest: Running find delalloc tests
[  +0.004466]  mmcblk1: p1 p2 p3 p4 p5 p6 p7
[  +0.474998] BTRFS: selftest: Running btrfs_get_extent tests
[  +0.000429] BTRFS: selftest: Running hole first btrfs_get_extent test
[  +0.000066] BTRFS: selftest: Running outstanding_extents tests
[  +0.000134] BTRFS: selftest: Running qgroup tests
[  +0.000005] BTRFS: selftest: Qgroup basic add
[  +0.000185] BTRFS: selftest: Qgroup multiple refs test
[  +0.454980] rk-vcodec ff360000.rkvdec: Looking up vcodec-supply from device tree
[  +0.000176] rk-vcodec ff360000.rkvdec: parent devfreq retry
[  +0.009300] rockchip-dmc dmc: Looking up center-supply from device tree
[  +0.000249] rockchip-dmc dmc: current ATF version 0x101!
[  +0.008333] rockchip-dmc dmc: read tf version 0x101!
[  +0.010204] rockchip-dmc dmc: ddr_leakage=9
[  +0.006987] rockchip-dmc dmc: ddr_leakage-volt-sel=1
[  +0.007404] rockchip-dmc dmc: failed to get vop bandwidth to dmc rate
[  +0.013663] devfreq dmc: Couldn't update frequency transition information.
[  +0.006370] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/hdmi-sound[0]'
[  +0.000011] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/hdmi-sound[0]'
[  +0.000546] asoc-simple-card hdmi-sound: i2s-hifi <-> ff000000.i2s mapping ok
[  +0.006995] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/sound[0]'
[  +0.000012] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/sound[0]'
[  +0.020741] asoc-simple-card sound: rk3328-hifi <-> ff010000.i2s mapping ok
[  +0.006386] asoc-simple-card sound: snd-soc-dummy-dai <-> ff010000.i2s mapping ok
[  +0.007295] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/spdif-sound[0]'
[  +0.000012] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/spdif-sound[0]'
[  +0.000457] asoc-simple-card spdif-sound: dit-hifi <-> ff030000.spdif mapping ok
[  +0.006844] rk-vcodec ff360000.rkvdec: Looking up vcodec-supply from device tree
[  +0.000085] rk-vcodec ff360000.rkvdec: parent devfreq is ok
[  +0.006123] rk-vcodec ff360000.rkvdec: rkvdec_leakage=9
[  +0.005598] rk-vcodec ff360000.rkvdec: rkvdec_leakage-volt-sel=1
[  +0.005939] rk-vcodec ff360000.rkvdec: probe device
[  +0.005454] rk-vcodec ff360000.rkvdec: vpu mmu dec ffffffc078835c10
[  +0.005839] rk-vcodec ff360000.rkvdec: allocator is drm
[  +0.005442] rk-vcodec ff360000.rkvdec: checking hw id 3410
[  +0.006028] rk-vcodec ff360000.rkvdec: init success
[  +0.007451] rk808-rtc rk808-rtc: setting system clock to 2016-01-21 08:50:20 UTC (1453366220)
[  +0.005757] of_cfs_init
[  +0.005116] of_cfs_init: OK
[  +0.016020] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 415; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '-2ed8b386', rk_ko_ver is '5', built at '18:22:05', on 'Apr  1 2018'.
[  +0.007302] mali-utgard ff300000.gpu: mali_platform_device->num_resources = 9
[  +0.005838] mali-utgard ff300000.gpu: resource[0].start = 0x0x00000000ff300000
[  +0.005774] mali-utgard ff300000.gpu: resource[1].start = 0x0x00000000ff300000
[  +0.005628] mali-utgard ff300000.gpu: resource[2].start = 0x0x0000000000000012
[  +0.005543] mali-utgard ff300000.gpu: resource[3].start = 0x0x0000000000000013
[  +0.005495] mali-utgard ff300000.gpu: resource[4].start = 0x0x0000000000000014
[  +0.005455] mali-utgard ff300000.gpu: resource[5].start = 0x0x0000000000000015
[  +0.005407] mali-utgard ff300000.gpu: resource[6].start = 0x0x0000000000000016
[  +0.005372] mali-utgard ff300000.gpu: resource[7].start = 0x0x0000000000000017
[  +0.005366] mali-utgard ff300000.gpu: resource[8].start = 0x0x0000000000000018
[  +0.005379] D : [File] : drivers/gpu/arm/mali400/mali/platform/rk/rk.c; [Line] : 617; [Func] : mali_platform_device_init(); to add platform_specific_data to platform_device_of_mali.
[  +0.006443] mali-utgard ff300000.gpu: gpu_leakage=9
[  +0.005265] mali-utgard ff300000.gpu: gpu_leakage-volt-sel=1
[  +0.005356] mali-utgard ff300000.gpu: Looking up mali-supply from device tree
[  +0.001899] Mali: Mali device driver loaded
[  +0.006579] ALSA device list:
[  +0.005111]   #0: HDMI
[  +0.004966]   #1: I2S
[  +0.004906]   #2: SPDIF
[  +0.005090] of_dma_request_slave_channel: dma-names property of node '/serial@ff130000' missing or empty
[  +0.005689] ttyS2 - failed to request DMA
[  +0.005655] Freeing unused kernel memory: 1152K
[  +0.034275] random: systemd-udevd: uninitialized urandom read (16 bytes read, 12 bits of entropy available)
[  +0.003414] random: udevadm: uninitialized urandom read (16 bytes read, 12 bits of entropy available)
[  +0.000159] random: udevadm: uninitialized urandom read (16 bytes read, 12 bits of entropy available)
[  +0.000045] random: udevadm: uninitialized urandom read (16 bytes read, 12 bits of entropy available)
[  +0.000285] random: udevadm: uninitialized urandom read (16 bytes read, 12 bits of entropy available)
[  +0.000277] random: udevadm: uninitialized urandom read (16 bytes read, 12 bits of entropy available)
[  +0.000291] random: udevadm: uninitialized urandom read (16 bytes read, 12 bits of entropy available)
[  +0.000307] random: udevadm: uninitialized urandom read (16 bytes read, 12 bits of entropy available)
[  +0.000519] random: udevadm: uninitialized urandom read (16 bytes read, 12 bits of entropy available)
[  +0.000928] random: udevadm: uninitialized urandom read (16 bytes read, 12 bits of entropy available)
[  +0.022855] devfreq ff300000.gpu: Couldn't update frequency transition information.
[  +1.692309] vendor storage:20160801 ret = -1
[  +2.110067] xhci-hcd xhci-hcd.9.auto: Timeout while waiting for setup device command
[Apr 4 11:49] xhci-hcd xhci-hcd.9.auto: Timeout while waiting for setup device command
[  +0.215948] usb 5-1: device not accepting address 2, error -62
[  +5.400174] xhci-hcd xhci-hcd.9.auto: Timeout while waiting for setup device command
[  +5.231945] xhci-hcd xhci-hcd.9.auto: Timeout while waiting for setup device command
[  +0.216878] usb 5-1: device not accepting address 3, error -62
[  +0.036071] usb usb5-port1: attempt power cycle
[  +1.022138] xhci-hcd xhci-hcd.9.auto: Cannot set link state.
[  +0.015920] usb usb5-port1: cannot disable (err = -32)
[  +0.016017] xhci-hcd xhci-hcd.9.auto: Cannot set link state.
[  +0.006891] usb usb5-port1: cannot disable (err = -32)
[  +0.023448] md: linear personality registered for level -1
[  +0.011203] md: multipath personality registered for level -4
[  +0.011145] md: raid0 personality registered for level 0
[  +0.011334] md: raid1 personality registered for level 1
[  +0.009638] async_tx: api initialized (async)
[  +0.010897] md: raid6 personality registered for level 6
[  +0.006018] md: raid5 personality registered for level 5
[  +0.005749] md: raid4 personality registered for level 4
[  +0.015652] md: raid10 personality registered for level 10
[  +0.624340] EXT4-fs (mmcblk1p7): mounted filesystem with writeback data mode. Opts: (null)
[  +0.831086] systemd[1]: System time before build time, advancing clock.
[  +0.190941] ip_tables: (C) 2000-2006 Netfilter Core Team
[  +0.043932] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[  +0.009101] systemd[1]: Detected architecture arm64.
[  +0.038731] systemd[1]: Set hostname to <rock64>.
[  +1.651795] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[  +0.021356] systemd[1]: Listening on Journal Socket.
[  +0.009805] systemd[1]: Reached target Swap.
[  +0.010123] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[  +0.009993] systemd[1]: Listening on LVM2 metadata daemon socket.
[  +0.010047] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[  +0.009910] systemd[1]: Listening on RPCbind Server Activation Socket.
[  +0.010219] systemd[1]: Listening on Journal Audit Socket.
[  +0.009292] systemd[1]: Created slice User and Session Slice.
[  +0.009955] systemd[1]: Created slice System Slice.
[  +0.011822] systemd[1]: Starting Remount Root and Kernel File Systems...
[  +0.012924] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[  +0.011836] systemd[1]: Created slice system-getty.slice.
[  +0.012708] systemd[1]: Mounting Debug File System...
[  +0.011625] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[  +0.009891] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[  +0.009619] systemd[1]: Reached target Encrypted Volumes.
[  +0.009267] systemd[1]: Listening on udev Control Socket.
[  +0.009514] systemd[1]: Created slice system-serial\x2dgetty.slice.
[  +0.008303] systemd[1]: Listening on udev Kernel Socket.
[  +0.008718] systemd[1]: Created slice system-syncthing.slice.
[  +0.008360] systemd[1]: Listening on fsck to fsckd communication Socket.
[  +0.011047] systemd[1]: Mounting Huge Pages File System...
[  +0.009948] systemd[1]: Mounting NFSD configuration filesystem...
[  +0.028822] systemd[1]: Listening on Journal Socket (/dev/log).
[  +0.010206] systemd[1]: Mounting POSIX Message Queue File System...
[  +0.007994] systemd[1]: Listening on LVM2 poll daemon socket.
[  +0.015188] systemd[1]: Starting Restore / save the current clock...
[  +0.011661] systemd[1]: Starting Nameserver information manager...
[  +0.012229] systemd[1]: Mounting RPC Pipe File System...
[  +0.007226] systemd[1]: Listening on Syslog Socket.
[  +0.011362] systemd[1]: Starting Journal Service...
[  +0.008244] systemd[1]: Reached target Slices.
[  +0.008512] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[  +0.018103] systemd[1]: Starting Load Kernel Modules...
[  +0.016110] systemd[1]: Mounted NFSD configuration filesystem.
[  +0.008265] systemd[1]: Mounted RPC Pipe File System.
[  +0.008024] systemd[1]: Mounted Huge Pages File System.
[  +0.007976] systemd[1]: Mounted Debug File System.
[  +0.007942] systemd[1]: Mounted POSIX Message Queue File System.
[  +0.008929] systemd[1]: Started Remount Root and Kernel File Systems.
[  +0.009836] systemd[1]: Started Create list of required static device nodes for the current kernel.
[  +0.011409] systemd[1]: Started Restore / save the current clock.
[  +0.014143] systemd[1]: Started Load Kernel Modules.
[  +0.012071] systemd[1]: Started Nameserver information manager.
[  +0.019636] systemd[1]: Time has been changed
[  +0.008938] systemd[1]: Started LVM2 metadata daemon.
[  +0.011048] systemd[1]: Starting Apply Kernel Variables...
[  +0.010470] systemd[1]: Mounting Configuration File System...
[  +0.013069] systemd[1]: Mounting FUSE Control File System...
[  +0.021026] systemd[1]: Starting Create Static Device Nodes in /dev...
[  +0.027046] systemd[1]: Starting Initial Check File System Quotas...
[  +0.040499] systemd[1]: Starting udev Coldplug all Devices...
[  +0.014054] systemd[1]: Starting Load/Save Random Seed...
[  +0.011243] systemd[1]: Starting pNFS block layout mapping daemon...
[  +0.011774] systemd[1]: Mounted FUSE Control File System.
[  +0.007920] systemd[1]: Mounted Configuration File System.
[  +0.008255] systemd[1]: Started Journal Service.
[  +0.083529] systemd-journald[305]: Received request to flush runtime journal from PID 1
[  +1.196664] FAT-fs (mmcblk1p6): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[  +0.031520] FAT-fs (mmcblk1p6): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ +11.499992] random: nonblocking pool is initialized
[  +5.747796] xhci-hcd xhci-hcd.9.auto: Timeout while waiting for setup device command
[  +5.231993] xhci-hcd xhci-hcd.9.auto: Timeout while waiting for setup device command
[  +0.217917] usb 5-1: device not accepting address 5, error -62
[  +0.016687] xhci-hcd xhci-hcd.9.auto: Cannot set link state.
[  +0.016775] usb usb5-port1: cannot disable (err = -32)
[  +0.968641] usb 5-1: new SuperSpeed USB device number 6 using xhci-hcd
[  +0.028982] usb 5-1: New USB device found, idVendor=174c, idProduct=55aa
[  +0.017095] usb 5-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[  +0.017049] usb 5-1: Product: External HDD
[  +0.016795] usb 5-1: Manufacturer: 01234567890123456789012345678901234567890123
[  +0.017223] usb 5-1: SerialNumber: 201308070213
[  +0.080534] usb-storage 5-1:1.0: USB Mass Storage device detected
[  +0.009429] usb-storage 5-1:1.0: Quirks match for vid 174c pid 55aa: c00000
[  +0.012170] scsi host0: usb-storage 5-1:1.0
[  +0.014324] usbcore: registered new interface driver usb-storage
[  +0.014634] usbcore: registered new interface driver uas
[  +6.266770] scsi 0:0:0:0: Direct-Access     WDC WD32 01ABYS-01B9A0    13.0 PQ: 0 ANSI: 5
[  +0.021096] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[  +0.018004] sd 0:0:0:0: [sda] Write Protect is off
[  +0.016951] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
[  +0.006667] sd 0:0:0:0: [sda] No Caching mode page found
[  +0.007142] sd 0:0:0:0: [sda] Assuming drive cache: write through
[  +0.063202]  sda: sda1
[  +0.008882] sd 0:0:0:0: [sda] Attached SCSI disk
[  +0.796793] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: user_xattr,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,acl
[  +2.960428] rk_gmac-dwmac ff540000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[Apr 4 11:50] NFSD: starting 90-second grace period (net ffffff8009287800)