Enable kernel modules for RBD and IPVS #33

jmreicha · 2018-08-07T16:47:27Z

The RBD and CEPH modules enable Ceph distributed storage
The IPVS modules enable Kubernetes load balancing via IPVS

Change-Id: I9f2c1b0d8d56a8d3da1774f51a4701212ac6ffff added IPGRE module to enable: (#18) ip tunnel add grx mode gre Change-Id: I26bda9ece68f9f6be1277da0779076694d5d845c ayufan: rockchip_linux_defconfig compile ZRAM as module Change-Id: I2ee48973cb370130cc5d75008a07d5777c69208a ayufan: rockchip_defconfig: disable CONFIG_SCHED_WALT as it makes system unstable Change-Id: Id2a150311fcaad9f11127320558dc3caafb250e4 config: add more USB wifi chipsets (#19) * Add some more USB wifi chipsets to default config. * Fix typo in default config. Added openvswitch kernel module compilation (#22) ayufan: defconfig: add RK805 pinctrl Change-Id: I9144206544db4e86e73a4d553fb8db3aa194c619 ayufan: enable additional realtek devices Change-Id: Ie3598c47154b648540f161ad4aedd597bc33f83f config: Add support for modules/features requested by issues #24 (AUTOFS4), rockchip-linux#54 (DRBD), rockchip-linux#64 (Multiple Routing Tables), rockchip-linux#87 (RTL8188EU), rockchip-linux#107 (iSCSI), rockchip-linux#148 (1-W GPIO) (#24) ayufan: rtl8812au: add Edimax 600 USB adapter Add requested kernel modules/features for issue rockchip-linux#153 and LIRC, PPS GPIO support, remove wifi staging drivers. (#25) Fix compile error (#26) Multiple definition error due to midgard and bifrost both selected ayufan: defconfig: add a bunch of kernel modules Change-Id: I77f5c4809c35b6c74a3bb668487eba93a0a15169 ayufan: rockchip_wlan: revert changes Change-Id: I6aa0bbc24e2fdfb6da350ed167d59c4eea836c2a ayufan: defconfig: enable CONFIG_MEMTEST Change-Id: I82c3d1b2d35fb10172f891571ef600a692ac4e61 ayufan: defconfig: remove unusued kernel configs Change-Id: I2a4a2e5785dd5796bb7404718898127718b86425 ayufan: defconfig: enable initrd in bzip2/lzma/lzo/lz4 Change-Id: I88ea1f8127d8fdadf90dd4428a51a1582adc2687 ayufan: defconfig: enable PWM FAN Change-Id: I87a364e95d937c354e06eb41fead43d8d5cb0b4a external: defconfig: Add support for f2fs and crc32 (#32) Add support for f2fs and it's dependency crc32 to rock64. This patch may or may not need to be included as well due to this bug https://bugs.debian.org/819725 A official patch was added by Debian https://salsa.debian.org/kernel-team/linux/blob/master/debian/patches/bugfix/all/fs-add-module_softdep-declarations-for-hard-coded-cr.patch external: defconfig: enable kernel modules for RBD and IPVS (#33) external: defconfig: Make crc, crc32, f2fs to be compiled into kernel. (#35) This changes crc, crc32, and f2fs to be compiled into the kernel instead of as module. This also fixes the issue of crc32-arm64 not being compiled due to a incorrect driver name. CONFIG_CRYPTO_CRC32_ARM64 became CONFIG_CRYPTO_CRC32_ARM64_CE in newer kernel sources. That's why I had to change that here. ayufan: defconfig: use CONFIG_HZ=250 Change-Id: I8009db93ee7c5af5e7804a004ab03d0ba97d20e2 CONFIG_SQUASHFS_XZ=y (#41) cyberp: defconfig: squashfs xz for snap support defconfig: enable binfmt-misc (#36) ayufan: defconfig: organize with savedefconfig ayufan: defconfig: support tehuti 10gbps adapter ayufan: defconfig: enable usb gadget via configfs ayufan: dts: compile-in audio codecs Change-Id: I7c70870395a10a0eafff006aabc17faf1d33355e

[ Upstream commit 7749112 ] The current number of KVM_IRQCHIP_NUM_PINS results in an order 3 allocation (32kb) for each guest start/restart. This can result in OOM killer activity even with free swap when the memory is fragmented enough: kernel: qemu-system-s39 invoked oom-killer: gfp_mask=0x440dc0(GFP_KERNEL_ACCOUNT|__GFP_COMP|__GFP_ZERO), order=3, oom_score_adj=0 kernel: CPU: 1 PID: 357274 Comm: qemu-system-s39 Kdump: loaded Not tainted 5.4.0-29-generic ayufan-rock64#33-Ubuntu kernel: Hardware name: IBM 8562 T02 Z06 (LPAR) kernel: Call Trace: kernel: ([<00000001f848fe2a>] show_stack+0x7a/0xc0) kernel: [<00000001f8d3437a>] dump_stack+0x8a/0xc0 kernel: [<00000001f8687032>] dump_header+0x62/0x258 kernel: [<00000001f8686122>] oom_kill_process+0x172/0x180 kernel: [<00000001f8686abe>] out_of_memory+0xee/0x580 kernel: [<00000001f86e66b8>] __alloc_pages_slowpath+0xd18/0xe90 kernel: [<00000001f86e6ad4>] __alloc_pages_nodemask+0x2a4/0x320 kernel: [<00000001f86b1ab4>] kmalloc_order+0x34/0xb0 kernel: [<00000001f86b1b62>] kmalloc_order_trace+0x32/0xe0 kernel: [<00000001f84bb806>] kvm_set_irq_routing+0xa6/0x2e0 kernel: [<00000001f84c99a4>] kvm_arch_vm_ioctl+0x544/0x9e0 kernel: [<00000001f84b8936>] kvm_vm_ioctl+0x396/0x760 kernel: [<00000001f875df66>] do_vfs_ioctl+0x376/0x690 kernel: [<00000001f875e304>] ksys_ioctl+0x84/0xb0 kernel: [<00000001f875e39a>] __s390x_sys_ioctl+0x2a/0x40 kernel: [<00000001f8d55424>] system_call+0xd8/0x2c8 As far as I can tell s390x does not use the iopins as we bail our for anything other than KVM_IRQ_ROUTING_S390_ADAPTER and the chip/pin is only used for KVM_IRQ_ROUTING_IRQCHIP. So let us use a small number to reduce the memory footprint. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/20200617083620.5409-1-borntraeger@de.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 6b6382a ] When multiple adapters are present in the system, pci hot-removing second adapter leads to the following warning as both the adapters registered thermal zone device with same thermal zone name/type. Therefore, use unique thermal zone name during thermal zone device initialization. Also mark thermal zone dev NULL once unregistered. [ 414.370143] ------------[ cut here ]------------ [ 414.370944] sysfs group 'power' not found for kobject 'hwmon0' [ 414.371747] WARNING: CPU: 9 PID: 2661 at fs/sysfs/group.c:281 sysfs_remove_group+0x76/0x80 [ 414.382550] CPU: 9 PID: 2661 Comm: bash Not tainted 5.8.0-rc6+ ayufan-rock64#33 [ 414.383593] Hardware name: Supermicro X10SRA-F/X10SRA-F, BIOS 2.0a 06/23/2016 [ 414.384669] RIP: 0010:sysfs_remove_group+0x76/0x80 [ 414.385738] Code: 48 89 df 5b 5d 41 5c e9 d8 b5 ff ff 48 89 df e8 60 b0 ff ff eb cb 49 8b 14 24 48 8b 75 00 48 c7 c7 90 ae 13 bb e8 6a 27 d0 ff <0f> 0b 5b 5d 41 5c c3 0f 1f 00 0f 1f 44 00 00 48 85 f6 74 31 41 54 [ 414.388404] RSP: 0018:ffffa22bc080fcb0 EFLAGS: 00010286 [ 414.389638] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 414.390829] RDX: 0000000000000001 RSI: ffff8ee2de3e9510 RDI: ffff8ee2de3e9510 [ 414.392064] RBP: ffffffffbaef2ee0 R08: 0000000000000000 R09: 0000000000000000 [ 414.393224] R10: 0000000000000000 R11: 000000002b30006c R12: ffff8ee260720008 [ 414.394388] R13: ffff8ee25e0a40e8 R14: ffffa22bc080ff08 R15: ffff8ee2c3be5020 [ 414.395661] FS: 00007fd2a7171740(0000) GS:ffff8ee2de200000(0000) knlGS:0000000000000000 [ 414.396825] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 414.398011] CR2: 00007f178ffe5020 CR3: 000000084c5cc003 CR4: 00000000003606e0 [ 414.399172] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 414.400352] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 414.401473] Call Trace: [ 414.402685] device_del+0x89/0x400 [ 414.403819] device_unregister+0x16/0x60 [ 414.405024] hwmon_device_unregister+0x44/0xa0 [ 414.406112] thermal_remove_hwmon_sysfs+0x196/0x200 [ 414.407256] thermal_zone_device_unregister+0x1b5/0x1f0 [ 414.408415] cxgb4_thermal_remove+0x3c/0x4f [cxgb4] [ 414.409668] remove_one+0x212/0x290 [cxgb4] [ 414.410875] pci_device_remove+0x36/0xb0 [ 414.412004] device_release_driver_internal+0xe2/0x1c0 [ 414.413276] pci_stop_bus_device+0x64/0x90 [ 414.414433] pci_stop_and_remove_bus_device_locked+0x16/0x30 [ 414.415609] remove_store+0x75/0x90 [ 414.416790] kernfs_fop_write+0x114/0x1b0 [ 414.417930] vfs_write+0xcf/0x210 [ 414.419059] ksys_write+0xa7/0xe0 [ 414.420120] do_syscall_64+0x4c/0xa0 [ 414.421278] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 414.422335] RIP: 0033:0x7fd2a686afd0 [ 414.423396] Code: Bad RIP value. [ 414.424549] RSP: 002b:00007fffc1446148 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 414.425638] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007fd2a686afd0 [ 414.426830] RDX: 0000000000000002 RSI: 00007fd2a7196000 RDI: 0000000000000001 [ 414.427927] RBP: 00007fd2a7196000 R08: 000000000000000a R09: 00007fd2a7171740 [ 414.428923] R10: 00007fd2a7171740 R11: 0000000000000246 R12: 00007fd2a6b43400 [ 414.430082] R13: 0000000000000002 R14: 0000000000000001 R15: 0000000000000000 [ 414.431027] irq event stamp: 76300 [ 414.435678] ---[ end trace 13865acb4d5ab00f ]--- Fixes: b187191 ("cxgb4: Add thermal zone support") Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 23c2d49 upstream. The kmemleak_*_phys() apis do not check the address for lowmem's min boundary, while the caller may pass an address below lowmem, which will trigger an oops: # echo scan > /sys/kernel/debug/kmemleak Unable to handle kernel paging request at virtual address ff5fffffffe00000 Oops [#1] Modules linked in: CPU: 2 PID: 134 Comm: bash Not tainted 5.18.0-rc1-next-20220407 ayufan-rock64#33 Hardware name: riscv-virtio,qemu (DT) epc : scan_block+0x74/0x15c ra : scan_block+0x72/0x15c epc : ffffffff801e5806 ra : ffffffff801e5804 sp : ff200000104abc30 gp : ffffffff815cd4e8 tp : ff60000004cfa340 t0 : 0000000000000200 t1 : 00aaaaaac23954cc t2 : 00000000000003ff s0 : ff200000104abc90 s1 : ffffffff81b0ff28 a0 : 0000000000000000 a1 : ff5fffffffe01000 a2 : ffffffff81b0ff28 a3 : 0000000000000002 a4 : 0000000000000001 a5 : 0000000000000000 a6 : ff200000104abd7c a7 : 0000000000000005 s2 : ff5fffffffe00ff9 s3 : ffffffff815cd998 s4 : ffffffff815d0e90 s5 : ffffffff81b0ff28 s6 : 0000000000000020 s7 : ffffffff815d0eb0 s8 : ffffffffffffffff s9 : ff5fffffffe00000 s10: ff5fffffffe01000 s11: 0000000000000022 t3 : 00ffffffaa17db4c t4 : 000000000000000f t5 : 0000000000000001 t6 : 0000000000000000 status: 0000000000000100 badaddr: ff5fffffffe00000 cause: 000000000000000d scan_gray_list+0x12e/0x1a6 kmemleak_scan+0x2aa/0x57e kmemleak_write+0x32a/0x40c full_proxy_write+0x56/0x82 vfs_write+0xa6/0x2a6 ksys_write+0x6c/0xe2 sys_write+0x22/0x2a ret_from_syscall+0x0/0x2 The callers may not quite know the actual address they pass(e.g. from devicetree). So the kmemleak_*_phys() apis should guarantee the address they finally use is in lowmem range, so check the address for lowmem's min boundary. Link: https://lkml.kernel.org/r/20220413122925.33856-1-patrick.wang.shcn@gmail.com Signed-off-by: Patrick Wang <patrick.wang.shcn@gmail.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit bcd7026 ] By keep sending L2CAP_CONF_REQ packets, chan->num_conf_rsp increases multiple times and eventually it will wrap around the maximum number (i.e., 255). This patch prevents this by adding a boundary check with L2CAP_MAX_CONF_RSP Btmon log: Bluetooth monitor ver 5.64 = Note: Linux version 6.1.0-rc2 (x86_64) 0.264594 = Note: Bluetooth subsystem version 2.22 0.264636 @ MGMT Open: btmon (privileged) version 1.22 {0x0001} 0.272191 = New Index: 00:00:00:00:00:00 (Primary,Virtual,hci0) [hci0] 13.877604 @ RAW Open: 9496 (privileged) version 2.22 {0x0002} 13.890741 = Open Index: 00:00:00:00:00:00 [hci0] 13.900426 (...) > ACL Data RX: Handle 200 flags 0x00 dlen 1033 ayufan-rock64#32 [hci0] 14.273106 invalid packet size (12 != 1033) 08 00 01 00 02 01 04 00 01 10 ff ff ............ > ACL Data RX: Handle 200 flags 0x00 dlen 1547 ayufan-rock64#33 [hci0] 14.273561 invalid packet size (14 != 1547) 0a 00 01 00 04 01 06 00 40 00 00 00 00 00 ........@..... > ACL Data RX: Handle 200 flags 0x00 dlen 2061 ayufan-rock64#34 [hci0] 14.274390 invalid packet size (16 != 2061) 0c 00 01 00 04 01 08 00 40 00 00 00 00 00 00 04 ........@....... > ACL Data RX: Handle 200 flags 0x00 dlen 2061 ayufan-rock64#35 [hci0] 14.274932 invalid packet size (16 != 2061) 0c 00 01 00 04 01 08 00 40 00 00 00 07 00 03 00 ........@....... = bluetoothd: Bluetooth daemon 5.43 14.401828 > ACL Data RX: Handle 200 flags 0x00 dlen 1033 ayufan-rock64#36 [hci0] 14.275753 invalid packet size (12 != 1033) 08 00 01 00 04 01 04 00 40 00 00 00 ........@... Signed-off-by: Sungwoo Kim <iam@sung-woo.kim> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit bcd7026 ] By keep sending L2CAP_CONF_REQ packets, chan->num_conf_rsp increases multiple times and eventually it will wrap around the maximum number (i.e., 255). This patch prevents this by adding a boundary check with L2CAP_MAX_CONF_RSP Btmon log: Bluetooth monitor ver 5.64 = Note: Linux version 6.1.0-rc2 (x86_64) 0.264594 = Note: Bluetooth subsystem version 2.22 0.264636 @ MGMT Open: btmon (privileged) version 1.22 {0x0001} 0.272191 = New Index: 00:00:00:00:00:00 (Primary,Virtual,hci0) [hci0] 13.877604 @ RAW Open: 9496 (privileged) version 2.22 {0x0002} 13.890741 = Open Index: 00:00:00:00:00:00 [hci0] 13.900426 (...) > ACL Data RX: Handle 200 flags 0x00 dlen 1033 ayufan-rock64#32 [hci0] 14.273106 invalid packet size (12 != 1033) 08 00 01 00 02 01 04 00 01 10 ff ff ............ > ACL Data RX: Handle 200 flags 0x00 dlen 1547 ayufan-rock64#33 [hci0] 14.273561 invalid packet size (14 != 1547) 0a 00 01 00 04 01 06 00 40 00 00 00 00 00 ........@..... > ACL Data RX: Handle 200 flags 0x00 dlen 2061 ayufan-rock64#34 [hci0] 14.274390 invalid packet size (16 != 2061) 0c 00 01 00 04 01 08 00 40 00 00 00 00 00 00 04 ........@....... > ACL Data RX: Handle 200 flags 0x00 dlen 2061 ayufan-rock64#35 [hci0] 14.274932 invalid packet size (16 != 2061) 0c 00 01 00 04 01 08 00 40 00 00 00 07 00 03 00 ........@....... = bluetoothd: Bluetooth daemon 5.43 14.401828 > ACL Data RX: Handle 200 flags 0x00 dlen 1033 ayufan-rock64#36 [hci0] 14.275753 invalid packet size (12 != 1033) 08 00 01 00 04 01 04 00 40 00 00 00 ........@... Change-Id: Id3b87180787bdded28e876ed0500ca6156579fb8 Signed-off-by: Sungwoo Kim <iam@sung-woo.kim> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> (cherry picked from commit f3fe681) Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

[ Upstream commit bcd7026 ] By keep sending L2CAP_CONF_REQ packets, chan->num_conf_rsp increases multiple times and eventually it will wrap around the maximum number (i.e., 255). This patch prevents this by adding a boundary check with L2CAP_MAX_CONF_RSP Btmon log: Bluetooth monitor ver 5.64 = Note: Linux version 6.1.0-rc2 (x86_64) 0.264594 = Note: Bluetooth subsystem version 2.22 0.264636 @ MGMT Open: btmon (privileged) version 1.22 {0x0001} 0.272191 = New Index: 00:00:00:00:00:00 (Primary,Virtual,hci0) [hci0] 13.877604 @ RAW Open: 9496 (privileged) version 2.22 {0x0002} 13.890741 = Open Index: 00:00:00:00:00:00 [hci0] 13.900426 (...) > ACL Data RX: Handle 200 flags 0x00 dlen 1033 ayufan-rock64#32 [hci0] 14.273106 invalid packet size (12 != 1033) 08 00 01 00 02 01 04 00 01 10 ff ff ............ > ACL Data RX: Handle 200 flags 0x00 dlen 1547 ayufan-rock64#33 [hci0] 14.273561 invalid packet size (14 != 1547) 0a 00 01 00 04 01 06 00 40 00 00 00 00 00 ........@..... > ACL Data RX: Handle 200 flags 0x00 dlen 2061 ayufan-rock64#34 [hci0] 14.274390 invalid packet size (16 != 2061) 0c 00 01 00 04 01 08 00 40 00 00 00 00 00 00 04 ........@....... > ACL Data RX: Handle 200 flags 0x00 dlen 2061 ayufan-rock64#35 [hci0] 14.274932 invalid packet size (16 != 2061) 0c 00 01 00 04 01 08 00 40 00 00 00 07 00 03 00 ........@....... = bluetoothd: Bluetooth daemon 5.43 14.401828 > ACL Data RX: Handle 200 flags 0x00 dlen 1033 ayufan-rock64#36 [hci0] 14.275753 invalid packet size (12 != 1033) 08 00 01 00 04 01 04 00 40 00 00 00 ........@... Signed-off-by: Sungwoo Kim <iam@sung-woo.kim> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 14bb1e8 ] Recently, I frequently hit the following test failure: [root@arch-fb-vm1 bpf]# ./test_progs -n 33/1 test_lookup_update:PASS:skel_open 0 nsec [...] test_lookup_update:PASS:sync_rcu 0 nsec test_lookup_update:FAIL:map1_leak inner_map1 leaked! ayufan-rock64#33/1 btf_map_in_map/lookup_update:FAIL ayufan-rock64#33 btf_map_in_map:FAIL In the test, after map is closed and then after two rcu grace periods, it is assumed that map_id is not available to user space. But the above assumption cannot be guaranteed. After zero or one or two rcu grace periods in different siturations, the actual freeing-map-work is put into a workqueue. Later on, when the work is dequeued, the map will be actually freed. See bpf_map_put() in kernel/bpf/syscall.c. By using workqueue, there is no ganrantee that map will be actually freed after a couple of rcu grace periods. This patch removed such map leak detection and then the test can pass consistently. Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20240322061353.632136-1-yonghong.song@linux.dev Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit af9a873 ] During the stress testing of the jffs2 file system,the following abnormal printouts were found: [ 2430.649000] Unable to handle kernel paging request at virtual address 0069696969696948 [ 2430.649622] Mem abort info: [ 2430.649829] ESR = 0x96000004 [ 2430.650115] EC = 0x25: DABT (current EL), IL = 32 bits [ 2430.650564] SET = 0, FnV = 0 [ 2430.650795] EA = 0, S1PTW = 0 [ 2430.651032] FSC = 0x04: level 0 translation fault [ 2430.651446] Data abort info: [ 2430.651683] ISV = 0, ISS = 0x00000004 [ 2430.652001] CM = 0, WnR = 0 [ 2430.652558] [0069696969696948] address between user and kernel address ranges [ 2430.653265] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 2430.654512] CPU: 2 PID: 20919 Comm: cat Not tainted 5.15.25-g512f31242bf6 ayufan-rock64#33 [ 2430.655008] Hardware name: linux,dummy-virt (DT) [ 2430.655517] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 2430.656142] pc : kfree+0x78/0x348 [ 2430.656630] lr : jffs2_free_inode+0x24/0x48 [ 2430.657051] sp : ffff800009eebd10 [ 2430.657355] x29: ffff800009eebd10 x28: 0000000000000001 x27: 0000000000000000 [ 2430.658327] x26: ffff000038f09d80 x25: 0080000000000000 x24: ffff800009d38000 [ 2430.658919] x23: 5a5a5a5a5a5a5a5a x22: ffff000038f09d80 x21: ffff8000084f0d14 [ 2430.659434] x20: ffff0000bf9a6ac0 x19: 0169696969696940 x18: 0000000000000000 [ 2430.659969] x17: ffff8000b6506000 x16: ffff800009eec000 x15: 0000000000004000 [ 2430.660637] x14: 0000000000000000 x13: 00000001000820a1 x12: 00000000000d1b19 [ 2430.661345] x11: 0004000800000000 x10: 0000000000000001 x9 : ffff8000084f0d14 [ 2430.662025] x8 : ffff0000bf9a6b40 x7 : ffff0000bf9a6b48 x6 : 0000000003470302 [ 2430.662695] x5 : ffff00002e41dcc0 x4 : ffff0000bf9aa3b0 x3 : 0000000003470342 [ 2430.663486] x2 : 0000000000000000 x1 : ffff8000084f0d14 x0 : fffffc0000000000 [ 2430.664217] Call trace: [ 2430.664528] kfree+0x78/0x348 [ 2430.664855] jffs2_free_inode+0x24/0x48 [ 2430.665233] i_callback+0x24/0x50 [ 2430.665528] rcu_do_batch+0x1ac/0x448 [ 2430.665892] rcu_core+0x28c/0x3c8 [ 2430.666151] rcu_core_si+0x18/0x28 [ 2430.666473] __do_softirq+0x138/0x3cc [ 2430.666781] irq_exit+0xf0/0x110 [ 2430.667065] handle_domain_irq+0x6c/0x98 [ 2430.667447] gic_handle_irq+0xac/0xe8 [ 2430.667739] call_on_irq_stack+0x28/0x54 The parameter passed to kfree was 5a5a5a5a, which corresponds to the target field of the jffs_inode_info structure. It was found that all variables in the jffs_inode_info structure were 5a5a5a5a, except for the first member sem. It is suspected that these variables are not initialized because they were set to 5a5a5a5a during memory testing, which is meant to detect uninitialized memory.The sem variable is initialized in the function jffs2_i_init_once, while other members are initialized in the function jffs2_init_inode_info. The function jffs2_init_inode_info is called after iget_locked, but in the iget_locked function, the destroy_inode process is triggered, which releases the inode and consequently, the target member of the inode is not initialized.In concurrent high pressure scenarios, iget_locked may enter the destroy_inode branch as described in the code. Since the destroy_inode functionality of jffs2 only releases the target, the fix method is to set target to NULL in jffs2_i_init_once. Signed-off-by: Wang Yong <wang.yong12@zte.com.cn> Reviewed-by: Lu Zhongjun <lu.zhongjun@zte.com.cn> Reviewed-by: Yang Tao <yang.tao172@zte.com.cn> Cc: Xu Xin <xu.xin16@zte.com.cn> Cc: Yang Yang <yang.yang29@zte.com.cn> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>

Enable kernel modules for RBD and IPVS

0247001

ayufan merged commit 427df30 into ayufan-rock64:release-4.4 Aug 8, 2018

ayufan pushed a commit that referenced this pull request Aug 9, 2018

external: defconfig: enable kernel modules for RBD and IPVS (#33)

64736f4

ayufan pushed a commit that referenced this pull request Sep 29, 2018

external: defconfig: enable kernel modules for RBD and IPVS (#33)

6c4eaf3

ayufan pushed a commit that referenced this pull request Dec 11, 2018

external: defconfig: enable kernel modules for RBD and IPVS (#33)

cd1c31c

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Enable kernel modules for RBD and IPVS #33

Enable kernel modules for RBD and IPVS #33

jmreicha commented Aug 7, 2018

Enable kernel modules for RBD and IPVS #33

Enable kernel modules for RBD and IPVS #33

Conversation

jmreicha commented Aug 7, 2018