Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with
or
.
Download ZIP
Fetching contributors…

Cannot retrieve contributors at this time

6743 lines (6201 sloc) 167.704 kB
/* vi:set ts=8 sts=4 sw=4:
*
* VIM - Vi IMproved by Bram Moolenaar
*
* Do ":help uganda" in Vim to read copying and usage conditions.
* Do ":help credits" in Vim to see a list of people who contributed.
* See README.txt for an overview of the Vim source code.
*/
/*
* ops.c: implementation of various operators: op_shift, op_delete, op_tilde,
* op_change, op_yank, do_put, do_join
*/
#include "vim.h"
/*
* Number of registers.
* 0 = unnamed register, for normal yanks and puts
* 1..9 = registers '1' to '9', for deletes
* 10..35 = registers 'a' to 'z'
* 36 = delete register '-'
* 37 = Selection register '*'. Only if FEAT_CLIPBOARD defined
* 38 = Clipboard register '+'. Only if FEAT_CLIPBOARD and FEAT_X11 defined
*/
/*
* Symbolic names for some registers.
*/
#define DELETION_REGISTER 36
#ifdef FEAT_CLIPBOARD
# define STAR_REGISTER 37
# ifdef FEAT_X11
# define PLUS_REGISTER 38
# else
# define PLUS_REGISTER STAR_REGISTER /* there is only one */
# endif
#endif
#ifdef FEAT_DND
# define TILDE_REGISTER (PLUS_REGISTER + 1)
#endif
#ifdef FEAT_CLIPBOARD
# ifdef FEAT_DND
# define NUM_REGISTERS (TILDE_REGISTER + 1)
# else
# define NUM_REGISTERS (PLUS_REGISTER + 1)
# endif
#else
# define NUM_REGISTERS 37
#endif
/*
* Each yank register is an array of pointers to lines.
*/
static struct yankreg
{
char_u **y_array; /* pointer to array of line pointers */
linenr_T y_size; /* number of lines in y_array */
char_u y_type; /* MLINE, MCHAR or MBLOCK */
#ifdef FEAT_VISUAL
colnr_T y_width; /* only set if y_type == MBLOCK */
#endif
} y_regs[NUM_REGISTERS];
static struct yankreg *y_current; /* ptr to current yankreg */
static int y_append; /* TRUE when appending */
static struct yankreg *y_previous = NULL; /* ptr to last written yankreg */
/*
* structure used by block_prep, op_delete and op_yank for blockwise operators
* also op_change, op_shift, op_insert, op_replace - AKelly
*/
struct block_def
{
int startspaces; /* 'extra' cols before first char */
int endspaces; /* 'extra' cols after last char */
int textlen; /* chars in block */
char_u *textstart; /* pointer to 1st char (partially) in block */
colnr_T textcol; /* index of chars (partially) in block */
colnr_T start_vcol; /* start col of 1st char wholly inside block */
colnr_T end_vcol; /* start col of 1st char wholly after block */
#ifdef FEAT_VISUALEXTRA
int is_short; /* TRUE if line is too short to fit in block */
int is_MAX; /* TRUE if curswant==MAXCOL when starting */
int is_oneChar; /* TRUE if block within one character */
int pre_whitesp; /* screen cols of ws before block */
int pre_whitesp_c; /* chars of ws before block */
colnr_T end_char_vcols; /* number of vcols of post-block char */
#endif
colnr_T start_char_vcols; /* number of vcols of pre-block char */
};
#ifdef FEAT_VISUALEXTRA
static void shift_block __ARGS((oparg_T *oap, int amount));
static void block_insert __ARGS((oparg_T *oap, char_u *s, int b_insert, struct block_def*bdp));
#endif
static int stuff_yank __ARGS((int, char_u *));
static void put_reedit_in_typebuf __ARGS((int silent));
static int put_in_typebuf __ARGS((char_u *s, int esc, int colon,
int silent));
static void stuffescaped __ARGS((char_u *arg, int literally));
#ifdef FEAT_MBYTE
static void mb_adjust_opend __ARGS((oparg_T *oap));
#endif
static void free_yank __ARGS((long));
static void free_yank_all __ARGS((void));
static int yank_copy_line __ARGS((struct block_def *bd, long y_idx));
#ifdef FEAT_CLIPBOARD
static void copy_yank_reg __ARGS((struct yankreg *reg));
# if defined(FEAT_VISUAL) || defined(FEAT_EVAL)
static void may_set_selection __ARGS((void));
# endif
#endif
static void dis_msg __ARGS((char_u *p, int skip_esc));
#if defined(FEAT_COMMENTS) || defined(PROTO)
static char_u *skip_comment __ARGS((char_u *line, int process, int include_space, int *is_comment));
#endif
#ifdef FEAT_VISUAL
static void block_prep __ARGS((oparg_T *oap, struct block_def *, linenr_T, int));
#endif
#if defined(FEAT_CLIPBOARD) || defined(FEAT_EVAL)
static void str_to_reg __ARGS((struct yankreg *y_ptr, int type, char_u *str, long len, long blocklen));
#endif
static int ends_in_white __ARGS((linenr_T lnum));
#ifdef FEAT_COMMENTS
static int same_leader __ARGS((linenr_T lnum, int, char_u *, int, char_u *));
static int fmt_check_par __ARGS((linenr_T, int *, char_u **, int do_comments));
#else
static int fmt_check_par __ARGS((linenr_T));
#endif
/*
* The names of operators.
* IMPORTANT: Index must correspond with defines in vim.h!!!
* The third field indicates whether the operator always works on lines.
*/
static char opchars[][3] =
{
{NUL, NUL, FALSE}, /* OP_NOP */
{'d', NUL, FALSE}, /* OP_DELETE */
{'y', NUL, FALSE}, /* OP_YANK */
{'c', NUL, FALSE}, /* OP_CHANGE */
{'<', NUL, TRUE}, /* OP_LSHIFT */
{'>', NUL, TRUE}, /* OP_RSHIFT */
{'!', NUL, TRUE}, /* OP_FILTER */
{'g', '~', FALSE}, /* OP_TILDE */
{'=', NUL, TRUE}, /* OP_INDENT */
{'g', 'q', TRUE}, /* OP_FORMAT */
{':', NUL, TRUE}, /* OP_COLON */
{'g', 'U', FALSE}, /* OP_UPPER */
{'g', 'u', FALSE}, /* OP_LOWER */
{'J', NUL, TRUE}, /* DO_JOIN */
{'g', 'J', TRUE}, /* DO_JOIN_NS */
{'g', '?', FALSE}, /* OP_ROT13 */
{'r', NUL, FALSE}, /* OP_REPLACE */
{'I', NUL, FALSE}, /* OP_INSERT */
{'A', NUL, FALSE}, /* OP_APPEND */
{'z', 'f', TRUE}, /* OP_FOLD */
{'z', 'o', TRUE}, /* OP_FOLDOPEN */
{'z', 'O', TRUE}, /* OP_FOLDOPENREC */
{'z', 'c', TRUE}, /* OP_FOLDCLOSE */
{'z', 'C', TRUE}, /* OP_FOLDCLOSEREC */
{'z', 'd', TRUE}, /* OP_FOLDDEL */
{'z', 'D', TRUE}, /* OP_FOLDDELREC */
{'g', 'w', TRUE}, /* OP_FORMAT2 */
{'g', '@', FALSE}, /* OP_FUNCTION */
};
/*
* Translate a command name into an operator type.
* Must only be called with a valid operator name!
*/
int
get_op_type(char1, char2)
int char1;
int char2;
{
int i;
if (char1 == 'r') /* ignore second character */
return OP_REPLACE;
if (char1 == '~') /* when tilde is an operator */
return OP_TILDE;
for (i = 0; ; ++i)
if (opchars[i][0] == char1 && opchars[i][1] == char2)
break;
return i;
}
#if defined(FEAT_VISUAL) || defined(PROTO)
/*
* Return TRUE if operator "op" always works on whole lines.
*/
int
op_on_lines(op)
int op;
{
return opchars[op][2];
}
#endif
/*
* Get first operator command character.
* Returns 'g' or 'z' if there is another command character.
*/
int
get_op_char(optype)
int optype;
{
return opchars[optype][0];
}
/*
* Get second operator command character.
*/
int
get_extra_op_char(optype)
int optype;
{
return opchars[optype][1];
}
/*
* op_shift - handle a shift operation
*/
void
op_shift(oap, curs_top, amount)
oparg_T *oap;
int curs_top;
int amount;
{
long i;
int first_char;
char_u *s;
#ifdef FEAT_VISUAL
int block_col = 0;
#endif
if (u_save((linenr_T)(oap->start.lnum - 1),
(linenr_T)(oap->end.lnum + 1)) == FAIL)
return;
#ifdef FEAT_VISUAL
if (oap->block_mode)
block_col = curwin->w_cursor.col;
#endif
for (i = oap->line_count; --i >= 0; )
{
first_char = *ml_get_curline();
if (first_char == NUL) /* empty line */
curwin->w_cursor.col = 0;
#ifdef FEAT_VISUALEXTRA
else if (oap->block_mode)
shift_block(oap, amount);
#endif
else
/* Move the line right if it doesn't start with '#', 'smartindent'
* isn't set or 'cindent' isn't set or '#' isn't in 'cino'. */
#if defined(FEAT_SMARTINDENT) || defined(FEAT_CINDENT)
if (first_char != '#' || !preprocs_left())
#endif
{
shift_line(oap->op_type == OP_LSHIFT, p_sr, amount, FALSE);
}
++curwin->w_cursor.lnum;
}
changed_lines(oap->start.lnum, 0, oap->end.lnum + 1, 0L);
#ifdef FEAT_VISUAL
if (oap->block_mode)
{
curwin->w_cursor.lnum = oap->start.lnum;
curwin->w_cursor.col = block_col;
}
else
#endif
if (curs_top) /* put cursor on first line, for ">>" */
{
curwin->w_cursor.lnum = oap->start.lnum;
beginline(BL_SOL | BL_FIX); /* shift_line() may have set cursor.col */
}
else
--curwin->w_cursor.lnum; /* put cursor on last line, for ":>" */
if (oap->line_count > p_report)
{
if (oap->op_type == OP_RSHIFT)
s = (char_u *)">";
else
s = (char_u *)"<";
if (oap->line_count == 1)
{
if (amount == 1)
sprintf((char *)IObuff, _("1 line %sed 1 time"), s);
else
sprintf((char *)IObuff, _("1 line %sed %d times"), s, amount);
}
else
{
if (amount == 1)
sprintf((char *)IObuff, _("%ld lines %sed 1 time"),
oap->line_count, s);
else
sprintf((char *)IObuff, _("%ld lines %sed %d times"),
oap->line_count, s, amount);
}
msg(IObuff);
}
/*
* Set "'[" and "']" marks.
*/
curbuf->b_op_start = oap->start;
curbuf->b_op_end.lnum = oap->end.lnum;
curbuf->b_op_end.col = (colnr_T)STRLEN(ml_get(oap->end.lnum));
if (curbuf->b_op_end.col > 0)
--curbuf->b_op_end.col;
}
/*
* shift the current line one shiftwidth left (if left != 0) or right
* leaves cursor on first blank in the line
*/
void
shift_line(left, round, amount, call_changed_bytes)
int left;
int round;
int amount;
int call_changed_bytes; /* call changed_bytes() */
{
int count;
int i, j;
int p_sw = (int)curbuf->b_p_sw;
count = get_indent(); /* get current indent */
if (round) /* round off indent */
{
i = count / p_sw; /* number of p_sw rounded down */
j = count % p_sw; /* extra spaces */
if (j && left) /* first remove extra spaces */
--amount;
if (left)
{
i -= amount;
if (i < 0)
i = 0;
}
else
i += amount;
count = i * p_sw;
}
else /* original vi indent */
{
if (left)
{
count -= p_sw * amount;
if (count < 0)
count = 0;
}
else
count += p_sw * amount;
}
/* Set new indent */
#ifdef FEAT_VREPLACE
if (State & VREPLACE_FLAG)
change_indent(INDENT_SET, count, FALSE, NUL, call_changed_bytes);
else
#endif
(void)set_indent(count, call_changed_bytes ? SIN_CHANGED : 0);
}
#if defined(FEAT_VISUALEXTRA) || defined(PROTO)
/*
* Shift one line of the current block one shiftwidth right or left.
* Leaves cursor on first character in block.
*/
static void
shift_block(oap, amount)
oparg_T *oap;
int amount;
{
int left = (oap->op_type == OP_LSHIFT);
int oldstate = State;
int total;
char_u *newp, *oldp;
int oldcol = curwin->w_cursor.col;
int p_sw = (int)curbuf->b_p_sw;
int p_ts = (int)curbuf->b_p_ts;
struct block_def bd;
int incr;
colnr_T ws_vcol;
int i = 0, j = 0;
int len;
#ifdef FEAT_RIGHTLEFT
int old_p_ri = p_ri;
p_ri = 0; /* don't want revins in ident */
#endif
State = INSERT; /* don't want REPLACE for State */
block_prep(oap, &bd, curwin->w_cursor.lnum, TRUE);
if (bd.is_short)
return;
/* total is number of screen columns to be inserted/removed */
total = amount * p_sw;
oldp = ml_get_curline();
if (!left)
{
/*
* 1. Get start vcol
* 2. Total ws vcols
* 3. Divvy into TABs & spp
* 4. Construct new string
*/
total += bd.pre_whitesp; /* all virtual WS upto & incl a split TAB */
ws_vcol = bd.start_vcol - bd.pre_whitesp;
if (bd.startspaces)
{
#ifdef FEAT_MBYTE
if (has_mbyte)
bd.textstart += (*mb_ptr2len)(bd.textstart);
else
#endif
++bd.textstart;
}
for ( ; vim_iswhite(*bd.textstart); )
{
incr = lbr_chartabsize_adv(&bd.textstart, (colnr_T)(bd.start_vcol));
total += incr;
bd.start_vcol += incr;
}
/* OK, now total=all the VWS reqd, and textstart points at the 1st
* non-ws char in the block. */
if (!curbuf->b_p_et)
i = ((ws_vcol % p_ts) + total) / p_ts; /* number of tabs */
if (i)
j = ((ws_vcol % p_ts) + total) % p_ts; /* number of spp */
else
j = total;
/* if we're splitting a TAB, allow for it */
bd.textcol -= bd.pre_whitesp_c - (bd.startspaces != 0);
len = (int)STRLEN(bd.textstart) + 1;
newp = alloc_check((unsigned)(bd.textcol + i + j + len));
if (newp == NULL)
return;
vim_memset(newp, NUL, (size_t)(bd.textcol + i + j + len));
mch_memmove(newp, oldp, (size_t)bd.textcol);
copy_chars(newp + bd.textcol, (size_t)i, TAB);
copy_spaces(newp + bd.textcol + i, (size_t)j);
/* the end */
mch_memmove(newp + bd.textcol + i + j, bd.textstart, (size_t)len);
}
else /* left */
{
colnr_T destination_col; /* column to which text in block will
be shifted */
char_u *verbatim_copy_end; /* end of the part of the line which is
copied verbatim */
colnr_T verbatim_copy_width;/* the (displayed) width of this part
of line */
unsigned fill; /* nr of spaces that replace a TAB */
unsigned new_line_len; /* the length of the line after the
block shift */
size_t block_space_width;
size_t shift_amount;
char_u *non_white = bd.textstart;
colnr_T non_white_col;
/*
* Firstly, let's find the first non-whitespace character that is
* displayed after the block's start column and the character's column
* number. Also, let's calculate the width of all the whitespace
* characters that are displayed in the block and precede the searched
* non-whitespace character.
*/
/* If "bd.startspaces" is set, "bd.textstart" points to the character,
* the part of which is displayed at the block's beginning. Let's start
* searching from the next character. */
if (bd.startspaces)
mb_ptr_adv(non_white);
/* The character's column is in "bd.start_vcol". */
non_white_col = bd.start_vcol;
while (vim_iswhite(*non_white))
{
incr = lbr_chartabsize_adv(&non_white, non_white_col);
non_white_col += incr;
}
block_space_width = non_white_col - oap->start_vcol;
/* We will shift by "total" or "block_space_width", whichever is less.
*/
shift_amount = (block_space_width < (size_t)total
? block_space_width : (size_t)total);
/* The column to which we will shift the text. */
destination_col = (colnr_T)(non_white_col - shift_amount);
/* Now let's find out how much of the beginning of the line we can
* reuse without modification. */
verbatim_copy_end = bd.textstart;
verbatim_copy_width = bd.start_vcol;
/* If "bd.startspaces" is set, "bd.textstart" points to the character
* preceding the block. We have to subtract its width to obtain its
* column number. */
if (bd.startspaces)
verbatim_copy_width -= bd.start_char_vcols;
while (verbatim_copy_width < destination_col)
{
incr = lbr_chartabsize(verbatim_copy_end, verbatim_copy_width);
if (verbatim_copy_width + incr > destination_col)
break;
verbatim_copy_width += incr;
mb_ptr_adv(verbatim_copy_end);
}
/* If "destination_col" is different from the width of the initial
* part of the line that will be copied, it means we encountered a tab
* character, which we will have to partly replace with spaces. */
fill = destination_col - verbatim_copy_width;
/* The replacement line will consist of:
* - the beginning of the original line up to "verbatim_copy_end",
* - "fill" number of spaces,
* - the rest of the line, pointed to by non_white. */
new_line_len = (unsigned)(verbatim_copy_end - oldp)
+ fill
+ (unsigned)STRLEN(non_white) + 1;
newp = alloc_check(new_line_len);
if (newp == NULL)
return;
mch_memmove(newp, oldp, (size_t)(verbatim_copy_end - oldp));
copy_spaces(newp + (verbatim_copy_end - oldp), (size_t)fill);
STRMOVE(newp + (verbatim_copy_end - oldp) + fill, non_white);
}
/* replace the line */
ml_replace(curwin->w_cursor.lnum, newp, FALSE);
changed_bytes(curwin->w_cursor.lnum, (colnr_T)bd.textcol);
State = oldstate;
curwin->w_cursor.col = oldcol;
#ifdef FEAT_RIGHTLEFT
p_ri = old_p_ri;
#endif
}
#endif
#ifdef FEAT_VISUALEXTRA
/*
* Insert string "s" (b_insert ? before : after) block :AKelly
* Caller must prepare for undo.
*/
static void
block_insert(oap, s, b_insert, bdp)
oparg_T *oap;
char_u *s;
int b_insert;
struct block_def *bdp;
{
int p_ts;
int count = 0; /* extra spaces to replace a cut TAB */
int spaces = 0; /* non-zero if cutting a TAB */
colnr_T offset; /* pointer along new line */
unsigned s_len; /* STRLEN(s) */
char_u *newp, *oldp; /* new, old lines */
linenr_T lnum; /* loop var */
int oldstate = State;
State = INSERT; /* don't want REPLACE for State */
s_len = (unsigned)STRLEN(s);
for (lnum = oap->start.lnum + 1; lnum <= oap->end.lnum; lnum++)
{
block_prep(oap, bdp, lnum, TRUE);
if (bdp->is_short && b_insert)
continue; /* OP_INSERT, line ends before block start */
oldp = ml_get(lnum);
if (b_insert)
{
p_ts = bdp->start_char_vcols;
spaces = bdp->startspaces;
if (spaces != 0)
count = p_ts - 1; /* we're cutting a TAB */
offset = bdp->textcol;
}
else /* append */
{
p_ts = bdp->end_char_vcols;
if (!bdp->is_short) /* spaces = padding after block */
{
spaces = (bdp->endspaces ? p_ts - bdp->endspaces : 0);
if (spaces != 0)
count = p_ts - 1; /* we're cutting a TAB */
offset = bdp->textcol + bdp->textlen - (spaces != 0);
}
else /* spaces = padding to block edge */
{
/* if $ used, just append to EOL (ie spaces==0) */
if (!bdp->is_MAX)
spaces = (oap->end_vcol - bdp->end_vcol) + 1;
count = spaces;
offset = bdp->textcol + bdp->textlen;
}
}
newp = alloc_check((unsigned)(STRLEN(oldp)) + s_len + count + 1);
if (newp == NULL)
continue;
/* copy up to shifted part */
mch_memmove(newp, oldp, (size_t)(offset));
oldp += offset;
/* insert pre-padding */
copy_spaces(newp + offset, (size_t)spaces);
/* copy the new text */
mch_memmove(newp + offset + spaces, s, (size_t)s_len);
offset += s_len;
if (spaces && !bdp->is_short)
{
/* insert post-padding */
copy_spaces(newp + offset + spaces, (size_t)(p_ts - spaces));
/* We're splitting a TAB, don't copy it. */
oldp++;
/* We allowed for that TAB, remember this now */
count++;
}
if (spaces > 0)
offset += count;
STRMOVE(newp + offset, oldp);
ml_replace(lnum, newp, FALSE);
if (lnum == oap->end.lnum)
{
/* Set "']" mark to the end of the block instead of the end of
* the insert in the first line. */
curbuf->b_op_end.lnum = oap->end.lnum;
curbuf->b_op_end.col = offset;
}
} /* for all lnum */
changed_lines(oap->start.lnum + 1, 0, oap->end.lnum + 1, 0L);
State = oldstate;
}
#endif
#if defined(FEAT_LISP) || defined(FEAT_CINDENT) || defined(PROTO)
/*
* op_reindent - handle reindenting a block of lines.
*/
void
op_reindent(oap, how)
oparg_T *oap;
int (*how) __ARGS((void));
{
long i;
char_u *l;
int count;
linenr_T first_changed = 0;
linenr_T last_changed = 0;
linenr_T start_lnum = curwin->w_cursor.lnum;
/* Don't even try when 'modifiable' is off. */
if (!curbuf->b_p_ma)
{
EMSG(_(e_modifiable));
return;
}
for (i = oap->line_count; --i >= 0 && !got_int; )
{
/* it's a slow thing to do, so give feedback so there's no worry that
* the computer's just hung. */
if (i > 1
&& (i % 50 == 0 || i == oap->line_count - 1)
&& oap->line_count > p_report)
smsg((char_u *)_("%ld lines to indent... "), i);
/*
* Be vi-compatible: For lisp indenting the first line is not
* indented, unless there is only one line.
*/
#ifdef FEAT_LISP
if (i != oap->line_count - 1 || oap->line_count == 1
|| how != get_lisp_indent)
#endif
{
l = skipwhite(ml_get_curline());
if (*l == NUL) /* empty or blank line */
count = 0;
else
count = how(); /* get the indent for this line */
if (set_indent(count, SIN_UNDO))
{
/* did change the indent, call changed_lines() later */
if (first_changed == 0)
first_changed = curwin->w_cursor.lnum;
last_changed = curwin->w_cursor.lnum;
}
}
++curwin->w_cursor.lnum;
curwin->w_cursor.col = 0; /* make sure it's valid */
}
/* put cursor on first non-blank of indented line */
curwin->w_cursor.lnum = start_lnum;
beginline(BL_SOL | BL_FIX);
/* Mark changed lines so that they will be redrawn. When Visual
* highlighting was present, need to continue until the last line. When
* there is no change still need to remove the Visual highlighting. */
if (last_changed != 0)
changed_lines(first_changed, 0,
#ifdef FEAT_VISUAL
oap->is_VIsual ? start_lnum + oap->line_count :
#endif
last_changed + 1, 0L);
#ifdef FEAT_VISUAL
else if (oap->is_VIsual)
redraw_curbuf_later(INVERTED);
#endif
if (oap->line_count > p_report)
{
i = oap->line_count - (i + 1);
if (i == 1)
MSG(_("1 line indented "));
else
smsg((char_u *)_("%ld lines indented "), i);
}
/* set '[ and '] marks */
curbuf->b_op_start = oap->start;
curbuf->b_op_end = oap->end;
}
#endif /* defined(FEAT_LISP) || defined(FEAT_CINDENT) */
#if defined(FEAT_EVAL) || defined(PROTO)
/*
* Keep the last expression line here, for repeating.
*/
static char_u *expr_line = NULL;
/*
* Get an expression for the "\"=expr1" or "CTRL-R =expr1"
* Returns '=' when OK, NUL otherwise.
*/
int
get_expr_register()
{
char_u *new_line;
new_line = getcmdline('=', 0L, 0);
if (new_line == NULL)
return NUL;
if (*new_line == NUL) /* use previous line */
vim_free(new_line);
else
set_expr_line(new_line);
return '=';
}
/*
* Set the expression for the '=' register.
* Argument must be an allocated string.
*/
void
set_expr_line(new_line)
char_u *new_line;
{
vim_free(expr_line);
expr_line = new_line;
}
/*
* Get the result of the '=' register expression.
* Returns a pointer to allocated memory, or NULL for failure.
*/
char_u *
get_expr_line()
{
char_u *expr_copy;
char_u *rv;
static int nested = 0;
if (expr_line == NULL)
return NULL;
/* Make a copy of the expression, because evaluating it may cause it to be
* changed. */
expr_copy = vim_strsave(expr_line);
if (expr_copy == NULL)
return NULL;
/* When we are invoked recursively limit the evaluation to 10 levels.
* Then return the string as-is. */
if (nested >= 10)
return expr_copy;
++nested;
rv = eval_to_string(expr_copy, NULL, TRUE);
--nested;
vim_free(expr_copy);
return rv;
}
/*
* Get the '=' register expression itself, without evaluating it.
*/
char_u *
get_expr_line_src()
{
if (expr_line == NULL)
return NULL;
return vim_strsave(expr_line);
}
#endif /* FEAT_EVAL */
/*
* Check if 'regname' is a valid name of a yank register.
* Note: There is no check for 0 (default register), caller should do this
*/
int
valid_yank_reg(regname, writing)
int regname;
int writing; /* if TRUE check for writable registers */
{
if ( (regname > 0 && ASCII_ISALNUM(regname))
|| (!writing && vim_strchr((char_u *)
#ifdef FEAT_EVAL
"/.%#:="
#else
"/.%#:"
#endif
, regname) != NULL)
|| regname == '"'
|| regname == '-'
|| regname == '_'
#ifdef FEAT_CLIPBOARD
|| regname == '*'
|| regname == '+'
#endif
#ifdef FEAT_DND
|| (!writing && regname == '~')
#endif
)
return TRUE;
return FALSE;
}
/*
* Set y_current and y_append, according to the value of "regname".
* Cannot handle the '_' register.
* Must only be called with a valid register name!
*
* If regname is 0 and writing, use register 0
* If regname is 0 and reading, use previous register
*/
void
get_yank_register(regname, writing)
int regname;
int writing;
{
int i;
y_append = FALSE;
if ((regname == 0 || regname == '"') && !writing && y_previous != NULL)
{
y_current = y_previous;
return;
}
i = regname;
if (VIM_ISDIGIT(i))
i -= '0';
else if (ASCII_ISLOWER(i))
i = CharOrdLow(i) + 10;
else if (ASCII_ISUPPER(i))
{
i = CharOrdUp(i) + 10;
y_append = TRUE;
}
else if (regname == '-')
i = DELETION_REGISTER;
#ifdef FEAT_CLIPBOARD
/* When selection is not available, use register 0 instead of '*' */
else if (clip_star.available && regname == '*')
i = STAR_REGISTER;
/* When clipboard is not available, use register 0 instead of '+' */
else if (clip_plus.available && regname == '+')
i = PLUS_REGISTER;
#endif
#ifdef FEAT_DND
else if (!writing && regname == '~')
i = TILDE_REGISTER;
#endif
else /* not 0-9, a-z, A-Z or '-': use register 0 */
i = 0;
y_current = &(y_regs[i]);
if (writing) /* remember the register we write into for do_put() */
y_previous = y_current;
}
#if defined(FEAT_CLIPBOARD) || defined(PROTO)
/*
* When "regname" is a clipboard register, obtain the selection. If it's not
* available return zero, otherwise return "regname".
*/
int
may_get_selection(regname)
int regname;
{
if (regname == '*')
{
if (!clip_star.available)
regname = 0;
else
clip_get_selection(&clip_star);
}
else if (regname == '+')
{
if (!clip_plus.available)
regname = 0;
else
clip_get_selection(&clip_plus);
}
return regname;
}
#endif
#if defined(FEAT_VISUAL) || defined(PROTO)
/*
* Obtain the contents of a "normal" register. The register is made empty.
* The returned pointer has allocated memory, use put_register() later.
*/
void *
get_register(name, copy)
int name;
int copy; /* make a copy, if FALSE make register empty. */
{
struct yankreg *reg;
int i;
#ifdef FEAT_CLIPBOARD
/* When Visual area changed, may have to update selection. Obtain the
* selection too. */
if (name == '*' && clip_star.available)
{
if (clip_isautosel_star())
clip_update_selection(&clip_star);
may_get_selection(name);
}
if (name == '+' && clip_plus.available)
{
if (clip_isautosel_plus())
clip_update_selection(&clip_plus);
may_get_selection(name);
}
#endif
get_yank_register(name, 0);
reg = (struct yankreg *)alloc((unsigned)sizeof(struct yankreg));
if (reg != NULL)
{
*reg = *y_current;
if (copy)
{
/* If we run out of memory some or all of the lines are empty. */
if (reg->y_size == 0)
reg->y_array = NULL;
else
reg->y_array = (char_u **)alloc((unsigned)(sizeof(char_u *)
* reg->y_size));
if (reg->y_array != NULL)
{
for (i = 0; i < reg->y_size; ++i)
reg->y_array[i] = vim_strsave(y_current->y_array[i]);
}
}
else
y_current->y_array = NULL;
}
return (void *)reg;
}
/*
* Put "reg" into register "name". Free any previous contents and "reg".
*/
void
put_register(name, reg)
int name;
void *reg;
{
get_yank_register(name, 0);
free_yank_all();
*y_current = *(struct yankreg *)reg;
vim_free(reg);
# ifdef FEAT_CLIPBOARD
/* Send text written to clipboard register to the clipboard. */
may_set_selection();
# endif
}
#endif
#if defined(FEAT_MOUSE) || defined(PROTO)
/*
* return TRUE if the current yank register has type MLINE
*/
int
yank_register_mline(regname)
int regname;
{
if (regname != 0 && !valid_yank_reg(regname, FALSE))
return FALSE;
if (regname == '_') /* black hole is always empty */
return FALSE;
get_yank_register(regname, FALSE);
return (y_current->y_type == MLINE);
}
#endif
/*
* Start or stop recording into a yank register.
*
* Return FAIL for failure, OK otherwise.
*/
int
do_record(c)
int c;
{
char_u *p;
static int regname;
struct yankreg *old_y_previous, *old_y_current;
int retval;
if (Recording == FALSE) /* start recording */
{
/* registers 0-9, a-z and " are allowed */
if (c < 0 || (!ASCII_ISALNUM(c) && c != '"'))
retval = FAIL;
else
{
Recording = TRUE;
showmode();
regname = c;
retval = OK;
}
}
else /* stop recording */
{
/*
* Get the recorded key hits. K_SPECIAL and CSI will be escaped, this
* needs to be removed again to put it in a register. exec_reg then
* adds the escaping back later.
*/
Recording = FALSE;
MSG("");
p = get_recorded();
if (p == NULL)
retval = FAIL;
else
{
/* Remove escaping for CSI and K_SPECIAL in multi-byte chars. */
vim_unescape_csi(p);
/*
* We don't want to change the default register here, so save and
* restore the current register name.
*/
old_y_previous = y_previous;
old_y_current = y_current;
retval = stuff_yank(regname, p);
y_previous = old_y_previous;
y_current = old_y_current;
}
}
return retval;
}
/*
* Stuff string "p" into yank register "regname" as a single line (append if
* uppercase). "p" must have been alloced.
*
* return FAIL for failure, OK otherwise
*/
static int
stuff_yank(regname, p)
int regname;
char_u *p;
{
char_u *lp;
char_u **pp;
/* check for read-only register */
if (regname != 0 && !valid_yank_reg(regname, TRUE))
{
vim_free(p);
return FAIL;
}
if (regname == '_') /* black hole: don't do anything */
{
vim_free(p);
return OK;
}
get_yank_register(regname, TRUE);
if (y_append && y_current->y_array != NULL)
{
pp = &(y_current->y_array[y_current->y_size - 1]);
lp = lalloc((long_u)(STRLEN(*pp) + STRLEN(p) + 1), TRUE);
if (lp == NULL)
{
vim_free(p);
return FAIL;
}
STRCPY(lp, *pp);
STRCAT(lp, p);
vim_free(p);
vim_free(*pp);
*pp = lp;
}
else
{
free_yank_all();
if ((y_current->y_array =
(char_u **)alloc((unsigned)sizeof(char_u *))) == NULL)
{
vim_free(p);
return FAIL;
}
y_current->y_array[0] = p;
y_current->y_size = 1;
y_current->y_type = MCHAR; /* used to be MLINE, why? */
}
return OK;
}
static int execreg_lastc = NUL;
/*
* execute a yank register: copy it into the stuff buffer
*
* return FAIL for failure, OK otherwise
*/
int
do_execreg(regname, colon, addcr, silent)
int regname;
int colon; /* insert ':' before each line */
int addcr; /* always add '\n' to end of line */
int silent; /* set "silent" flag in typeahead buffer */
{
long i;
char_u *p;
int retval = OK;
int remap;
if (regname == '@') /* repeat previous one */
{
if (execreg_lastc == NUL)
{
EMSG(_("E748: No previously used register"));
return FAIL;
}
regname = execreg_lastc;
}
/* check for valid regname */
if (regname == '%' || regname == '#' || !valid_yank_reg(regname, FALSE))
{
emsg_invreg(regname);
return FAIL;
}
execreg_lastc = regname;
#ifdef FEAT_CLIPBOARD
regname = may_get_selection(regname);
#endif
if (regname == '_') /* black hole: don't stuff anything */
return OK;
#ifdef FEAT_CMDHIST
if (regname == ':') /* use last command line */
{
if (last_cmdline == NULL)
{
EMSG(_(e_nolastcmd));
return FAIL;
}
vim_free(new_last_cmdline); /* don't keep the cmdline containing @: */
new_last_cmdline = NULL;
/* Escape all control characters with a CTRL-V */
p = vim_strsave_escaped_ext(last_cmdline,
(char_u *)"\001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037", Ctrl_V, FALSE);
if (p != NULL)
{
/* When in Visual mode "'<,'>" will be prepended to the command.
* Remove it when it's already there. */
if (VIsual_active && STRNCMP(p, "'<,'>", 5) == 0)
retval = put_in_typebuf(p + 5, TRUE, TRUE, silent);
else
retval = put_in_typebuf(p, TRUE, TRUE, silent);
}
vim_free(p);
}
#endif
#ifdef FEAT_EVAL
else if (regname == '=')
{
p = get_expr_line();
if (p == NULL)
return FAIL;
retval = put_in_typebuf(p, TRUE, colon, silent);
vim_free(p);
}
#endif
else if (regname == '.') /* use last inserted text */
{
p = get_last_insert_save();
if (p == NULL)
{
EMSG(_(e_noinstext));
return FAIL;
}
retval = put_in_typebuf(p, FALSE, colon, silent);
vim_free(p);
}
else
{
get_yank_register(regname, FALSE);
if (y_current->y_array == NULL)
return FAIL;
/* Disallow remaping for ":@r". */
remap = colon ? REMAP_NONE : REMAP_YES;
/*
* Insert lines into typeahead buffer, from last one to first one.
*/
put_reedit_in_typebuf(silent);
for (i = y_current->y_size; --i >= 0; )
{
char_u *escaped;
/* insert NL between lines and after last line if type is MLINE */
if (y_current->y_type == MLINE || i < y_current->y_size - 1
|| addcr)
{
if (ins_typebuf((char_u *)"\n", remap, 0, TRUE, silent) == FAIL)
return FAIL;
}
escaped = vim_strsave_escape_csi(y_current->y_array[i]);
if (escaped == NULL)
return FAIL;
retval = ins_typebuf(escaped, remap, 0, TRUE, silent);
vim_free(escaped);
if (retval == FAIL)
return FAIL;
if (colon && ins_typebuf((char_u *)":", remap, 0, TRUE, silent)
== FAIL)
return FAIL;
}
Exec_reg = TRUE; /* disable the 'q' command */
}
return retval;
}
/*
* If "restart_edit" is not zero, put it in the typeahead buffer, so that it's
* used only after other typeahead has been processed.
*/
static void
put_reedit_in_typebuf(silent)
int silent;
{
char_u buf[3];
if (restart_edit != NUL)
{
if (restart_edit == 'V')
{
buf[0] = 'g';
buf[1] = 'R';
buf[2] = NUL;
}
else
{
buf[0] = restart_edit == 'I' ? 'i' : restart_edit;
buf[1] = NUL;
}
if (ins_typebuf(buf, REMAP_NONE, 0, TRUE, silent) == OK)
restart_edit = NUL;
}
}
/*
* Insert register contents "s" into the typeahead buffer, so that it will be
* executed again.
* When "esc" is TRUE it is to be taken literally: Escape CSI characters and
* no remapping.
*/
static int
put_in_typebuf(s, esc, colon, silent)
char_u *s;
int esc;
int colon; /* add ':' before the line */
int silent;
{
int retval = OK;
put_reedit_in_typebuf(silent);
if (colon)
retval = ins_typebuf((char_u *)"\n", REMAP_NONE, 0, TRUE, silent);
if (retval == OK)
{
char_u *p;
if (esc)
p = vim_strsave_escape_csi(s);
else
p = s;
if (p == NULL)
retval = FAIL;
else
retval = ins_typebuf(p, esc ? REMAP_NONE : REMAP_YES,
0, TRUE, silent);
if (esc)
vim_free(p);
}
if (colon && retval == OK)
retval = ins_typebuf((char_u *)":", REMAP_NONE, 0, TRUE, silent);
return retval;
}
/*
* Insert a yank register: copy it into the Read buffer.
* Used by CTRL-R command and middle mouse button in insert mode.
*
* return FAIL for failure, OK otherwise
*/
int
insert_reg(regname, literally)
int regname;
int literally; /* insert literally, not as if typed */
{
long i;
int retval = OK;
char_u *arg;
int allocated;
/*
* It is possible to get into an endless loop by having CTRL-R a in
* register a and then, in insert mode, doing CTRL-R a.
* If you hit CTRL-C, the loop will be broken here.
*/
ui_breakcheck();
if (got_int)
return FAIL;
/* check for valid regname */
if (regname != NUL && !valid_yank_reg(regname, FALSE))
return FAIL;
#ifdef FEAT_CLIPBOARD
regname = may_get_selection(regname);
#endif
if (regname == '.') /* insert last inserted text */
retval = stuff_inserted(NUL, 1L, TRUE);
else if (get_spec_reg(regname, &arg, &allocated, TRUE))
{
if (arg == NULL)
return FAIL;
stuffescaped(arg, literally);
if (allocated)
vim_free(arg);
}
else /* name or number register */
{
get_yank_register(regname, FALSE);
if (y_current->y_array == NULL)
retval = FAIL;
else
{
for (i = 0; i < y_current->y_size; ++i)
{
stuffescaped(y_current->y_array[i], literally);
/*
* Insert a newline between lines and after last line if
* y_type is MLINE.
*/
if (y_current->y_type == MLINE || i < y_current->y_size - 1)
stuffcharReadbuff('\n');
}
}
}
return retval;
}
/*
* Stuff a string into the typeahead buffer, such that edit() will insert it
* literally ("literally" TRUE) or interpret is as typed characters.
*/
static void
stuffescaped(arg, literally)
char_u *arg;
int literally;
{
int c;
char_u *start;
while (*arg != NUL)
{
/* Stuff a sequence of normal ASCII characters, that's fast. Also
* stuff K_SPECIAL to get the effect of a special key when "literally"
* is TRUE. */
start = arg;
while ((*arg >= ' '
#ifndef EBCDIC
&& *arg < DEL /* EBCDIC: chars above space are normal */
#endif
)
|| (*arg == K_SPECIAL && !literally))
++arg;
if (arg > start)
stuffReadbuffLen(start, (long)(arg - start));
/* stuff a single special character */
if (*arg != NUL)
{
#ifdef FEAT_MBYTE
if (has_mbyte)
c = mb_cptr2char_adv(&arg);
else
#endif
c = *arg++;
if (literally && ((c < ' ' && c != TAB) || c == DEL))
stuffcharReadbuff(Ctrl_V);
stuffcharReadbuff(c);
}
}
}
/*
* If "regname" is a special register, return TRUE and store a pointer to its
* value in "argp".
*/
int
get_spec_reg(regname, argp, allocated, errmsg)
int regname;
char_u **argp;
int *allocated; /* return: TRUE when value was allocated */
int errmsg; /* give error message when failing */
{
int cnt;
*argp = NULL;
*allocated = FALSE;
switch (regname)
{
case '%': /* file name */
if (errmsg)
check_fname(); /* will give emsg if not set */
*argp = curbuf->b_fname;
return TRUE;
case '#': /* alternate file name */
*argp = getaltfname(errmsg); /* may give emsg if not set */
return TRUE;
#ifdef FEAT_EVAL
case '=': /* result of expression */
*argp = get_expr_line();
*allocated = TRUE;
return TRUE;
#endif
case ':': /* last command line */
if (last_cmdline == NULL && errmsg)
EMSG(_(e_nolastcmd));
*argp = last_cmdline;
return TRUE;
case '/': /* last search-pattern */
if (last_search_pat() == NULL && errmsg)
EMSG(_(e_noprevre));
*argp = last_search_pat();
return TRUE;
case '.': /* last inserted text */
*argp = get_last_insert_save();
*allocated = TRUE;
if (*argp == NULL && errmsg)
EMSG(_(e_noinstext));
return TRUE;
#ifdef FEAT_SEARCHPATH
case Ctrl_F: /* Filename under cursor */
case Ctrl_P: /* Path under cursor, expand via "path" */
if (!errmsg)
return FALSE;
*argp = file_name_at_cursor(FNAME_MESS | FNAME_HYP
| (regname == Ctrl_P ? FNAME_EXP : 0), 1L, NULL);
*allocated = TRUE;
return TRUE;
#endif
case Ctrl_W: /* word under cursor */
case Ctrl_A: /* WORD (mnemonic All) under cursor */
if (!errmsg)
return FALSE;
cnt = find_ident_under_cursor(argp, regname == Ctrl_W
? (FIND_IDENT|FIND_STRING) : FIND_STRING);
*argp = cnt ? vim_strnsave(*argp, cnt) : NULL;
*allocated = TRUE;
return TRUE;
case '_': /* black hole: always empty */
*argp = (char_u *)"";
return TRUE;
}
return FALSE;
}
/*
* Paste a yank register into the command line.
* Only for non-special registers.
* Used by CTRL-R command in command-line mode
* insert_reg() can't be used here, because special characters from the
* register contents will be interpreted as commands.
*
* return FAIL for failure, OK otherwise
*/
int
cmdline_paste_reg(regname, literally, remcr)
int regname;
int literally; /* Insert text literally instead of "as typed" */
int remcr; /* don't add trailing CR */
{
long i;
get_yank_register(regname, FALSE);
if (y_current->y_array == NULL)
return FAIL;
for (i = 0; i < y_current->y_size; ++i)
{
cmdline_paste_str(y_current->y_array[i], literally);
/* Insert ^M between lines and after last line if type is MLINE.
* Don't do this when "remcr" is TRUE and the next line is empty. */
if (y_current->y_type == MLINE
|| (i < y_current->y_size - 1
&& !(remcr
&& i == y_current->y_size - 2
&& *y_current->y_array[i + 1] == NUL)))
cmdline_paste_str((char_u *)"\r", literally);
/* Check for CTRL-C, in case someone tries to paste a few thousand
* lines and gets bored. */
ui_breakcheck();
if (got_int)
return FAIL;
}
return OK;
}
#if defined(FEAT_CLIPBOARD) || defined(PROTO)
/*
* Adjust the register name pointed to with "rp" for the clipboard being
* used always and the clipboard being available.
*/
void
adjust_clip_reg(rp)
int *rp;
{
/* If no reg. specified, and "unnamed" or "unnamedplus" is in 'clipboard',
* use '*' or '+' reg, respectively. "unnamedplus" prevails. */
if (*rp == 0 && clip_unnamed != 0)
*rp = ((clip_unnamed & CLIP_UNNAMED_PLUS) && clip_plus.available)
? '+' : '*';
if (!clip_star.available && *rp == '*')
*rp = 0;
if (!clip_plus.available && *rp == '+')
*rp = 0;
}
#endif
/*
* Handle a delete operation.
*
* Return FAIL if undo failed, OK otherwise.
*/
int
op_delete(oap)
oparg_T *oap;
{
int n;
linenr_T lnum;
char_u *ptr;
#ifdef FEAT_VISUAL
char_u *newp, *oldp;
struct block_def bd;
#endif
linenr_T old_lcount = curbuf->b_ml.ml_line_count;
int did_yank = FALSE;
if (curbuf->b_ml.ml_flags & ML_EMPTY) /* nothing to do */
return OK;
/* Nothing to delete, return here. Do prepare undo, for op_change(). */
if (oap->empty)
return u_save_cursor();
if (!curbuf->b_p_ma)
{
EMSG(_(e_modifiable));
return FAIL;
}
#ifdef FEAT_CLIPBOARD
adjust_clip_reg(&oap->regname);
#endif
#ifdef FEAT_MBYTE
if (has_mbyte)
mb_adjust_opend(oap);
#endif
/*
* Imitate the strange Vi behaviour: If the delete spans more than one
* line and motion_type == MCHAR and the result is a blank line, make the
* delete linewise. Don't do this for the change command or Visual mode.
*/
if ( oap->motion_type == MCHAR
#ifdef FEAT_VISUAL
&& !oap->is_VIsual
&& !oap->block_mode
#endif
&& oap->line_count > 1
&& oap->motion_force == NUL
&& oap->op_type == OP_DELETE)
{
ptr = ml_get(oap->end.lnum) + oap->end.col;
if (*ptr != NUL)
ptr += oap->inclusive;
ptr = skipwhite(ptr);
if (*ptr == NUL && inindent(0))
oap->motion_type = MLINE;
}
/*
* Check for trying to delete (e.g. "D") in an empty line.
* Note: For the change operator it is ok.
*/
if ( oap->motion_type == MCHAR
&& oap->line_count == 1
&& oap->op_type == OP_DELETE
&& *ml_get(oap->start.lnum) == NUL)
{
/*
* It's an error to operate on an empty region, when 'E' included in
* 'cpoptions' (Vi compatible).
*/
#ifdef FEAT_VIRTUALEDIT
if (virtual_op)
/* Virtual editing: Nothing gets deleted, but we set the '[ and ']
* marks as if it happened. */
goto setmarks;
#endif
if (vim_strchr(p_cpo, CPO_EMPTYREGION) != NULL)
beep_flush();
return OK;
}
/*
* Do a yank of whatever we're about to delete.
* If a yank register was specified, put the deleted text into that
* register. For the black hole register '_' don't yank anything.
*/
if (oap->regname != '_')
{
if (oap->regname != 0)
{
/* check for read-only register */
if (!valid_yank_reg(oap->regname, TRUE))
{
beep_flush();
return OK;
}
get_yank_register(oap->regname, TRUE); /* yank into specif'd reg. */
if (op_yank(oap, TRUE, FALSE) == OK) /* yank without message */
did_yank = TRUE;
}
/*
* Put deleted text into register 1 and shift number registers if the
* delete contains a line break, or when a regname has been specified.
*/
if (oap->regname != 0 || oap->motion_type == MLINE
|| oap->line_count > 1 || oap->use_reg_one)
{
y_current = &y_regs[9];
free_yank_all(); /* free register nine */
for (n = 9; n > 1; --n)
y_regs[n] = y_regs[n - 1];
y_previous = y_current = &y_regs[1];
y_regs[1].y_array = NULL; /* set register one to empty */
if (op_yank(oap, TRUE, FALSE) == OK)
did_yank = TRUE;
}
/* Yank into small delete register when no named register specified
* and the delete is within one line. */
if ((
#ifdef FEAT_CLIPBOARD
((clip_unnamed & CLIP_UNNAMED) && oap->regname == '*') ||
((clip_unnamed & CLIP_UNNAMED_PLUS) && oap->regname == '+') ||
#endif
oap->regname == 0) && oap->motion_type != MLINE
&& oap->line_count == 1)
{
oap->regname = '-';
get_yank_register(oap->regname, TRUE);
if (op_yank(oap, TRUE, FALSE) == OK)
did_yank = TRUE;
oap->regname = 0;
}
/*
* If there's too much stuff to fit in the yank register, then get a
* confirmation before doing the delete. This is crude, but simple.
* And it avoids doing a delete of something we can't put back if we
* want.
*/
if (!did_yank)
{
int msg_silent_save = msg_silent;
msg_silent = 0; /* must display the prompt */
n = ask_yesno((char_u *)_("cannot yank; delete anyway"), TRUE);
msg_silent = msg_silent_save;
if (n != 'y')
{
EMSG(_(e_abort));
return FAIL;
}
}
}
#ifdef FEAT_VISUAL
/*
* block mode delete
*/
if (oap->block_mode)
{
if (u_save((linenr_T)(oap->start.lnum - 1),
(linenr_T)(oap->end.lnum + 1)) == FAIL)
return FAIL;
for (lnum = curwin->w_cursor.lnum; lnum <= oap->end.lnum; ++lnum)
{
block_prep(oap, &bd, lnum, TRUE);
if (bd.textlen == 0) /* nothing to delete */
continue;
/* Adjust cursor position for tab replaced by spaces and 'lbr'. */
if (lnum == curwin->w_cursor.lnum)
{
curwin->w_cursor.col = bd.textcol + bd.startspaces;
# ifdef FEAT_VIRTUALEDIT
curwin->w_cursor.coladd = 0;
# endif
}
/* n == number of chars deleted
* If we delete a TAB, it may be replaced by several characters.
* Thus the number of characters may increase!
*/
n = bd.textlen - bd.startspaces - bd.endspaces;
oldp = ml_get(lnum);
newp = alloc_check((unsigned)STRLEN(oldp) + 1 - n);
if (newp == NULL)
continue;
/* copy up to deleted part */
mch_memmove(newp, oldp, (size_t)bd.textcol);
/* insert spaces */
copy_spaces(newp + bd.textcol,
(size_t)(bd.startspaces + bd.endspaces));
/* copy the part after the deleted part */
oldp += bd.textcol + bd.textlen;
STRMOVE(newp + bd.textcol + bd.startspaces + bd.endspaces, oldp);
/* replace the line */
ml_replace(lnum, newp, FALSE);
}
check_cursor_col();
changed_lines(curwin->w_cursor.lnum, curwin->w_cursor.col,
oap->end.lnum + 1, 0L);
oap->line_count = 0; /* no lines deleted */
}
else
#endif
if (oap->motion_type == MLINE)
{
if (oap->op_type == OP_CHANGE)
{
/* Delete the lines except the first one. Temporarily move the
* cursor to the next line. Save the current line number, if the
* last line is deleted it may be changed.
*/
if (oap->line_count > 1)
{
lnum = curwin->w_cursor.lnum;
++curwin->w_cursor.lnum;
del_lines((long)(oap->line_count - 1), TRUE);
curwin->w_cursor.lnum = lnum;
}
if (u_save_cursor() == FAIL)
return FAIL;
if (curbuf->b_p_ai) /* don't delete indent */
{
beginline(BL_WHITE); /* cursor on first non-white */
did_ai = TRUE; /* delete the indent when ESC hit */
ai_col = curwin->w_cursor.col;
}
else
beginline(0); /* cursor in column 0 */
truncate_line(FALSE); /* delete the rest of the line */
/* leave cursor past last char in line */
if (oap->line_count > 1)
u_clearline(); /* "U" command not possible after "2cc" */
}
else
{
del_lines(oap->line_count, TRUE);
beginline(BL_WHITE | BL_FIX);
u_clearline(); /* "U" command not possible after "dd" */
}
}
else
{
#ifdef FEAT_VIRTUALEDIT
if (virtual_op)
{
int endcol = 0;
/* For virtualedit: break the tabs that are partly included. */
if (gchar_pos(&oap->start) == '\t')
{
if (u_save_cursor() == FAIL) /* save first line for undo */
return FAIL;
if (oap->line_count == 1)
endcol = getviscol2(oap->end.col, oap->end.coladd);
coladvance_force(getviscol2(oap->start.col, oap->start.coladd));
oap->start = curwin->w_cursor;
if (oap->line_count == 1)
{
coladvance(endcol);
oap->end.col = curwin->w_cursor.col;
oap->end.coladd = curwin->w_cursor.coladd;
curwin->w_cursor = oap->start;
}
}
/* Break a tab only when it's included in the area. */
if (gchar_pos(&oap->end) == '\t'
&& (int)oap->end.coladd < oap->inclusive)
{
/* save last line for undo */
if (u_save((linenr_T)(oap->end.lnum - 1),
(linenr_T)(oap->end.lnum + 1)) == FAIL)
return FAIL;
curwin->w_cursor = oap->end;
coladvance_force(getviscol2(oap->end.col, oap->end.coladd));
oap->end = curwin->w_cursor;
curwin->w_cursor = oap->start;
}
}
#endif
if (oap->line_count == 1) /* delete characters within one line */
{
if (u_save_cursor() == FAIL) /* save line for undo */
return FAIL;
/* if 'cpoptions' contains '$', display '$' at end of change */
if ( vim_strchr(p_cpo, CPO_DOLLAR) != NULL
&& oap->op_type == OP_CHANGE
&& oap->end.lnum == curwin->w_cursor.lnum
#ifdef FEAT_VISUAL
&& !oap->is_VIsual
#endif
)
display_dollar(oap->end.col - !oap->inclusive);
n = oap->end.col - oap->start.col + 1 - !oap->inclusive;
#ifdef FEAT_VIRTUALEDIT
if (virtual_op)
{
/* fix up things for virtualedit-delete:
* break the tabs which are going to get in our way
*/
char_u *curline = ml_get_curline();
int len = (int)STRLEN(curline);
if (oap->end.coladd != 0
&& (int)oap->end.col >= len - 1
&& !(oap->start.coladd && (int)oap->end.col >= len - 1))
n++;
/* Delete at least one char (e.g, when on a control char). */
if (n == 0 && oap->start.coladd != oap->end.coladd)
n = 1;
/* When deleted a char in the line, reset coladd. */
if (gchar_cursor() != NUL)
curwin->w_cursor.coladd = 0;
}
#endif
if (oap->op_type == OP_DELETE
&& oap->inclusive
&& oap->end.lnum == curbuf->b_ml.ml_line_count
&& n > (int)STRLEN(ml_get(oap->end.lnum)))
{
/* Special case: gH<Del> deletes the last line. */
del_lines(1L, FALSE);
}
else
{
(void)del_bytes((long)n, !virtual_op, oap->op_type == OP_DELETE
#ifdef FEAT_VISUAL
&& !oap->is_VIsual
#endif
);
}
}
else /* delete characters between lines */
{
pos_T curpos;
int delete_last_line;
/* save deleted and changed lines for undo */
if (u_save((linenr_T)(curwin->w_cursor.lnum - 1),
(linenr_T)(curwin->w_cursor.lnum + oap->line_count)) == FAIL)
return FAIL;
delete_last_line = (oap->end.lnum == curbuf->b_ml.ml_line_count);
truncate_line(TRUE); /* delete from cursor to end of line */
curpos = curwin->w_cursor; /* remember curwin->w_cursor */
++curwin->w_cursor.lnum;
del_lines((long)(oap->line_count - 2), FALSE);
if (delete_last_line)
oap->end.lnum = curbuf->b_ml.ml_line_count;
n = (oap->end.col + 1 - !oap->inclusive);
if (oap->inclusive && delete_last_line
&& n > (int)STRLEN(ml_get(oap->end.lnum)))
{
/* Special case: gH<Del> deletes the last line. */
del_lines(1L, FALSE);
curwin->w_cursor = curpos; /* restore curwin->w_cursor */
if (curwin->w_cursor.lnum > curbuf->b_ml.ml_line_count)
curwin->w_cursor.lnum = curbuf->b_ml.ml_line_count;
}
else
{
/* delete from start of line until op_end */
curwin->w_cursor.col = 0;
(void)del_bytes((long)n, !virtual_op, oap->op_type == OP_DELETE
#ifdef FEAT_VISUAL
&& !oap->is_VIsual
#endif
);
curwin->w_cursor = curpos; /* restore curwin->w_cursor */
}
if (curwin->w_cursor.lnum < curbuf->b_ml.ml_line_count)
(void)do_join(2, FALSE, FALSE, FALSE);
}
}
msgmore(curbuf->b_ml.ml_line_count - old_lcount);
#ifdef FEAT_VIRTUALEDIT
setmarks:
#endif
#ifdef FEAT_VISUAL
if (oap->block_mode)
{
curbuf->b_op_end.lnum = oap->end.lnum;
curbuf->b_op_end.col = oap->start.col;
}
else
#endif
curbuf->b_op_end = oap->start;
curbuf->b_op_start = oap->start;
return OK;
}
#ifdef FEAT_MBYTE
/*
* Adjust end of operating area for ending on a multi-byte character.
* Used for deletion.
*/
static void
mb_adjust_opend(oap)
oparg_T *oap;
{
char_u *p;
if (oap->inclusive)
{
p = ml_get(oap->end.lnum);
oap->end.col += mb_tail_off(p, p + oap->end.col);
}
}
#endif
#if defined(FEAT_VISUALEXTRA) || defined(PROTO)
/*
* Replace a whole area with one character.
*/
int
op_replace(oap, c)
oparg_T *oap;
int c;
{
int n, numc;
#ifdef FEAT_MBYTE
int num_chars;
#endif
char_u *newp, *oldp;
size_t oldlen;
struct block_def bd;
if ((curbuf->b_ml.ml_flags & ML_EMPTY ) || oap->empty)
return OK; /* nothing to do */
#ifdef FEAT_MBYTE
if (has_mbyte)
mb_adjust_opend(oap);
#endif
if (u_save((linenr_T)(oap->start.lnum - 1),
(linenr_T)(oap->end.lnum + 1)) == FAIL)
return FAIL;
/*
* block mode replace
*/
if (oap->block_mode)
{
bd.is_MAX = (curwin->w_curswant == MAXCOL);
for ( ; curwin->w_cursor.lnum <= oap->end.lnum; ++curwin->w_cursor.lnum)
{
curwin->w_cursor.col = 0; /* make sure cursor position is valid */
block_prep(oap, &bd, curwin->w_cursor.lnum, TRUE);
if (bd.textlen == 0 && (!virtual_op || bd.is_MAX))
continue; /* nothing to replace */
/* n == number of extra chars required
* If we split a TAB, it may be replaced by several characters.
* Thus the number of characters may increase!
*/
#ifdef FEAT_VIRTUALEDIT
/* If the range starts in virtual space, count the initial
* coladd offset as part of "startspaces" */
if (virtual_op && bd.is_short && *bd.textstart == NUL)
{
pos_T vpos;
vpos.lnum = curwin->w_cursor.lnum;
getvpos(&vpos, oap->start_vcol);
bd.startspaces += vpos.coladd;
n = bd.startspaces;
}
else
#endif
/* allow for pre spaces */
n = (bd.startspaces ? bd.start_char_vcols - 1 : 0);
/* allow for post spp */
n += (bd.endspaces
#ifdef FEAT_VIRTUALEDIT
&& !bd.is_oneChar
#endif
&& bd.end_char_vcols > 0) ? bd.end_char_vcols - 1 : 0;
/* Figure out how many characters to replace. */
numc = oap->end_vcol - oap->start_vcol + 1;
if (bd.is_short && (!virtual_op || bd.is_MAX))
numc -= (oap->end_vcol - bd.end_vcol) + 1;
#ifdef FEAT_MBYTE
/* A double-wide character can be replaced only up to half the
* times. */
if ((*mb_char2cells)(c) > 1)
{
if ((numc & 1) && !bd.is_short)
{
++bd.endspaces;
++n;
}
numc = numc / 2;
}
/* Compute bytes needed, move character count to num_chars. */
num_chars = numc;
numc *= (*mb_char2len)(c);
#endif
/* oldlen includes textlen, so don't double count */
n += numc - bd.textlen;
oldp = ml_get_curline();
oldlen = STRLEN(oldp);
newp = alloc_check((unsigned)oldlen + 1 + n);
if (newp == NULL)
continue;
vim_memset(newp, NUL, (size_t)(oldlen + 1 + n));
/* copy up to deleted part */
mch_memmove(newp, oldp, (size_t)bd.textcol);
oldp += bd.textcol + bd.textlen;
/* insert pre-spaces */
copy_spaces(newp + bd.textcol, (size_t)bd.startspaces);
/* insert replacement chars CHECK FOR ALLOCATED SPACE */
#ifdef FEAT_MBYTE
if (has_mbyte)
{
n = (int)STRLEN(newp);
while (--num_chars >= 0)
n += (*mb_char2bytes)(c, newp + n);
}
else
#endif
copy_chars(newp + STRLEN(newp), (size_t)numc, c);
if (!bd.is_short)
{
/* insert post-spaces */
copy_spaces(newp + STRLEN(newp), (size_t)bd.endspaces);
/* copy the part after the changed part */
STRMOVE(newp + STRLEN(newp), oldp);
}
/* replace the line */
ml_replace(curwin->w_cursor.lnum, newp, FALSE);
}
}
else
{
/*
* MCHAR and MLINE motion replace.
*/
if (oap->motion_type == MLINE)
{
oap->start.col = 0;
curwin->w_cursor.col = 0;
oap->end.col = (colnr_T)STRLEN(ml_get(oap->end.lnum));
if (oap->end.col)
--oap->end.col;
}
else if (!oap->inclusive)
dec(&(oap->end));
while (ltoreq(curwin->w_cursor, oap->end))
{
n = gchar_cursor();
if (n != NUL)
{
#ifdef FEAT_MBYTE
if ((*mb_char2len)(c) > 1 || (*mb_char2len)(n) > 1)
{
/* This is slow, but it handles replacing a single-byte
* with a multi-byte and the other way around. */
oap->end.col += (*mb_char2len)(c) - (*mb_char2len)(n);
n = State;
State = REPLACE;
ins_char(c);
State = n;
/* Backup to the replaced character. */
dec_cursor();
}
else
#endif
{
#ifdef FEAT_VIRTUALEDIT
if (n == TAB)
{
int end_vcol = 0;
if (curwin->w_cursor.lnum == oap->end.lnum)
{
/* oap->end has to be recalculated when
* the tab breaks */
end_vcol = getviscol2(oap->end.col,
oap->end.coladd);
}
coladvance_force(getviscol());
if (curwin->w_cursor.lnum == oap->end.lnum)
getvpos(&oap->end, end_vcol);
}
#endif
pchar(curwin->w_cursor, c);
}
}
#ifdef FEAT_VIRTUALEDIT
else if (virtual_op && curwin->w_cursor.lnum == oap->end.lnum)
{
int virtcols = oap->end.coladd;
if (curwin->w_cursor.lnum == oap->start.lnum
&& oap->start.col == oap->end.col && oap->start.coladd)
virtcols -= oap->start.coladd;
/* oap->end has been trimmed so it's effectively inclusive;
* as a result an extra +1 must be counted so we don't
* trample the NUL byte. */
coladvance_force(getviscol2(oap->end.col, oap->end.coladd) + 1);
curwin->w_cursor.col -= (virtcols + 1);
for (; virtcols >= 0; virtcols--)
{
pchar(curwin->w_cursor, c);
if (inc(&curwin->w_cursor) == -1)
break;
}
}
#endif
/* Advance to next character, stop at the end of the file. */
if (inc_cursor() == -1)
break;
}
}
curwin->w_cursor = oap->start;
check_cursor();
changed_lines(oap->start.lnum, oap->start.col, oap->end.lnum + 1, 0L);
/* Set "'[" and "']" marks. */
curbuf->b_op_start = oap->start;
curbuf->b_op_end = oap->end;
return OK;
}
#endif
static int swapchars __ARGS((int op_type, pos_T *pos, int length));
/*
* Handle the (non-standard vi) tilde operator. Also for "gu", "gU" and "g?".
*/
void
op_tilde(oap)
oparg_T *oap;
{
pos_T pos;
#ifdef FEAT_VISUAL
struct block_def bd;
#endif
int did_change = FALSE;
if (u_save((linenr_T)(oap->start.lnum - 1),
(linenr_T)(oap->end.lnum + 1)) == FAIL)
return;
pos = oap->start;
#ifdef FEAT_VISUAL
if (oap->block_mode) /* Visual block mode */
{
for (; pos.lnum <= oap->end.lnum; ++pos.lnum)
{
int one_change;
block_prep(oap, &bd, pos.lnum, FALSE);
pos.col = bd.textcol;
one_change = swapchars(oap->op_type, &pos, bd.textlen);
did_change |= one_change;
# ifdef FEAT_NETBEANS_INTG
if (netbeans_active() && one_change)
{
char_u *ptr = ml_get_buf(curbuf, pos.lnum, FALSE);
netbeans_removed(curbuf, pos.lnum, bd.textcol,
(long)bd.textlen);
netbeans_inserted(curbuf, pos.lnum, bd.textcol,
&ptr[bd.textcol], bd.textlen);
}
# endif
}
if (did_change)
changed_lines(oap->start.lnum, 0, oap->end.lnum + 1, 0L);
}
else /* not block mode */
#endif
{
if (oap->motion_type == MLINE)
{
oap->start.col = 0;
pos.col = 0;
oap->end.col = (colnr_T)STRLEN(ml_get(oap->end.lnum));
if (oap->end.col)
--oap->end.col;
}
else if (!oap->inclusive)
dec(&(oap->end));
if (pos.lnum == oap->end.lnum)
did_change = swapchars(oap->op_type, &pos,
oap->end.col - pos.col + 1);
else
for (;;)
{
did_change |= swapchars(oap->op_type, &pos,
pos.lnum == oap->end.lnum ? oap->end.col + 1:
(int)STRLEN(ml_get_pos(&pos)));
if (ltoreq(oap->end, pos) || inc(&pos) == -1)
break;
}
if (did_change)
{
changed_lines(oap->start.lnum, oap->start.col, oap->end.lnum + 1,
0L);
#ifdef FEAT_NETBEANS_INTG
if (netbeans_active() && did_change)
{
char_u *ptr;
int count;
pos = oap->start;
while (pos.lnum < oap->end.lnum)
{
ptr = ml_get_buf(curbuf, pos.lnum, FALSE);
count = (int)STRLEN(ptr) - pos.col;
netbeans_removed(curbuf, pos.lnum, pos.col, (long)count);
netbeans_inserted(curbuf, pos.lnum, pos.col,
&ptr[pos.col], count);
pos.col = 0;
pos.lnum++;
}
ptr = ml_get_buf(curbuf, pos.lnum, FALSE);
count = oap->end.col - pos.col + 1;
netbeans_removed(curbuf, pos.lnum, pos.col, (long)count);
netbeans_inserted(curbuf, pos.lnum, pos.col,
&ptr[pos.col], count);
}
#endif
}
}
#ifdef FEAT_VISUAL
if (!did_change && oap->is_VIsual)
/* No change: need to remove the Visual selection */
redraw_curbuf_later(INVERTED);
#endif
/*
* Set '[ and '] marks.
*/
curbuf->b_op_start = oap->start;
curbuf->b_op_end = oap->end;
if (oap->line_count > p_report)
{
if (oap->line_count == 1)
MSG(_("1 line changed"));
else
smsg((char_u *)_("%ld lines changed"), oap->line_count);
}
}
/*
* Invoke swapchar() on "length" bytes at position "pos".
* "pos" is advanced to just after the changed characters.
* "length" is rounded up to include the whole last multi-byte character.
* Also works correctly when the number of bytes changes.
* Returns TRUE if some character was changed.
*/
static int
swapchars(op_type, pos, length)
int op_type;
pos_T *pos;
int length;
{
int todo;
int did_change = 0;
for (todo = length; todo > 0; --todo)
{
# ifdef FEAT_MBYTE
if (has_mbyte)
/* we're counting bytes, not characters */
todo -= (*mb_ptr2len)(ml_get_pos(pos)) - 1;
# endif
did_change |= swapchar(op_type, pos);
if (inc(pos) == -1) /* at end of file */
break;
}
return did_change;
}
/*
* If op_type == OP_UPPER: make uppercase,
* if op_type == OP_LOWER: make lowercase,
* if op_type == OP_ROT13: do rot13 encoding,
* else swap case of character at 'pos'
* returns TRUE when something actually changed.
*/
int
swapchar(op_type, pos)
int op_type;
pos_T *pos;
{
int c;
int nc;
c = gchar_pos(pos);
/* Only do rot13 encoding for ASCII characters. */
if (c >= 0x80 && op_type == OP_ROT13)
return FALSE;
#ifdef FEAT_MBYTE
if (op_type == OP_UPPER && c == 0xdf
&& (enc_latin1like || STRCMP(p_enc, "iso-8859-2") == 0))
{
pos_T sp = curwin->w_cursor;
/* Special handling of German sharp s: change to "SS". */
curwin->w_cursor = *pos;
del_char(FALSE);
ins_char('S');
ins_char('S');
curwin->w_cursor = sp;
inc(pos);
}
if (enc_dbcs != 0 && c >= 0x100) /* No lower/uppercase letter */
return FALSE;
#endif
nc = c;
if (MB_ISLOWER(c))
{
if (op_type == OP_ROT13)
nc = ROT13(c, 'a');
else if (op_type != OP_LOWER)
nc = MB_TOUPPER(c);
}
else if (MB_ISUPPER(c))
{
if (op_type == OP_ROT13)
nc = ROT13(c, 'A');
else if (op_type != OP_UPPER)
nc = MB_TOLOWER(c);
}
if (nc != c)
{
#ifdef FEAT_MBYTE
if (enc_utf8 && (c >= 0x80 || nc >= 0x80))
{
pos_T sp = curwin->w_cursor;
curwin->w_cursor = *pos;
/* don't use del_char(), it also removes composing chars */
del_bytes(utf_ptr2len(ml_get_cursor()), FALSE, FALSE);
ins_char(nc);
curwin->w_cursor = sp;
}
else
#endif
pchar(*pos, nc);
return TRUE;
}
return FALSE;
}
#if defined(FEAT_VISUALEXTRA) || defined(PROTO)
/*
* op_insert - Insert and append operators for Visual mode.
*/
void
op_insert(oap, count1)
oparg_T *oap;
long count1;
{
long ins_len, pre_textlen = 0;
char_u *firstline, *ins_text;
struct block_def bd;
int i;
/* edit() changes this - record it for OP_APPEND */
bd.is_MAX = (curwin->w_curswant == MAXCOL);
/* vis block is still marked. Get rid of it now. */
curwin->w_cursor.lnum = oap->start.lnum;
update_screen(INVERTED);
if (oap->block_mode)
{
#ifdef FEAT_VIRTUALEDIT
/* When 'virtualedit' is used, need to insert the extra spaces before
* doing block_prep(). When only "block" is used, virtual edit is
* already disabled, but still need it when calling
* coladvance_force(). */
if (curwin->w_cursor.coladd > 0)
{
int old_ve_flags = ve_flags;
ve_flags = VE_ALL;
if (u_save_cursor() == FAIL)
return;
coladvance_force(oap->op_type == OP_APPEND
? oap->end_vcol + 1 : getviscol());
if (oap->op_type == OP_APPEND)
--curwin->w_cursor.col;
ve_flags = old_ve_flags;
}
#endif
/* Get the info about the block before entering the text */
block_prep(oap, &bd, oap->start.lnum, TRUE);
firstline = ml_get(oap->start.lnum) + bd.textcol;
if (oap->op_type == OP_APPEND)
firstline += bd.textlen;
pre_textlen = (long)STRLEN(firstline);
}
if (oap->op_type == OP_APPEND)
{
if (oap->block_mode
#ifdef FEAT_VIRTUALEDIT
&& curwin->w_cursor.coladd == 0
#endif
)
{
/* Move the cursor to the character right of the block. */
curwin->w_set_curswant = TRUE;
while (*ml_get_cursor() != NUL
&& (curwin->w_cursor.col < bd.textcol + bd.textlen))
++curwin->w_cursor.col;
if (bd.is_short && !bd.is_MAX)
{
/* First line was too short, make it longer and adjust the
* values in "bd". */
if (u_save_cursor() == FAIL)
return;
for (i = 0; i < bd.endspaces; ++i)
ins_char(' ');
bd.textlen += bd.endspaces;
}
}
else
{
curwin->w_cursor = oap->end;
check_cursor_col();
/* Works just like an 'i'nsert on the next character. */
if (!lineempty(curwin->w_cursor.lnum)
&& oap->start_vcol != oap->end_vcol)
inc_cursor();
}
}
edit(NUL, FALSE, (linenr_T)count1);
/* If user has moved off this line, we don't know what to do, so do
* nothing.
* Also don't repeat the insert when Insert mode ended with CTRL-C. */
if (curwin->w_cursor.lnum != oap->start.lnum || got_int)
return;
if (oap->block_mode)
{
struct block_def bd2;
/*
* Spaces and tabs in the indent may have changed to other spaces and
* tabs. Get the starting column again and correct the length.
* Don't do this when "$" used, end-of-line will have changed.
*/
block_prep(oap, &bd2, oap->start.lnum, TRUE);
if (!bd.is_MAX || bd2.textlen < bd.textlen)
{
if (oap->op_type == OP_APPEND)
{
pre_textlen += bd2.textlen - bd.textlen;
if (bd2.endspaces)
--bd2.textlen;
}
bd.textcol = bd2.textcol;
bd.textlen = bd2.textlen;
}
/*
* Subsequent calls to ml_get() flush the firstline data - take a
* copy of the required string.
*/
firstline = ml_get(oap->start.lnum) + bd.textcol;
if (oap->op_type == OP_APPEND)
firstline += bd.textlen;
if (pre_textlen >= 0
&& (ins_len = (long)STRLEN(firstline) - pre_textlen) > 0)
{
ins_text = vim_strnsave(firstline, (int)ins_len);
if (ins_text != NULL)
{
/* block handled here */
if (u_save(oap->start.lnum,
(linenr_T)(oap->end.lnum + 1)) == OK)
block_insert(oap, ins_text, (oap->op_type == OP_INSERT),
&bd);
curwin->w_cursor.col = oap->start.col;
check_cursor();
vim_free(ins_text);
}
}
}
}
#endif
/*
* op_change - handle a change operation
*
* return TRUE if edit() returns because of a CTRL-O command
*/
int
op_change(oap)
oparg_T *oap;
{
colnr_T l;
int retval;
#ifdef FEAT_VISUALEXTRA
long offset;
linenr_T linenr;
long ins_len;
long pre_textlen = 0;
long pre_indent = 0;
char_u *firstline;
char_u *ins_text, *newp, *oldp;
struct block_def bd;
#endif
l = oap->start.col;
if (oap->motion_type == MLINE)
{
l = 0;
#ifdef FEAT_SMARTINDENT
if (!p_paste && curbuf->b_p_si
# ifdef FEAT_CINDENT
&& !curbuf->b_p_cin
# endif
)
can_si = TRUE; /* It's like opening a new line, do si */
#endif
}
/* First delete the text in the region. In an empty buffer only need to
* save for undo */
if (curbuf->b_ml.ml_flags & ML_EMPTY)
{
if (u_save_cursor() == FAIL)
return FALSE;
}
else if (op_delete(oap) == FAIL)
return FALSE;
if ((l > curwin->w_cursor.col) && !lineempty(curwin->w_cursor.lnum)
&& !virtual_op)
inc_cursor();
#ifdef FEAT_VISUALEXTRA
/* check for still on same line (<CR> in inserted text meaningless) */
/* skip blank lines too */
if (oap->block_mode)
{
# ifdef FEAT_VIRTUALEDIT
/* Add spaces before getting the current line length. */
if (virtual_op && (curwin->w_cursor.coladd > 0
|| gchar_cursor() == NUL))
coladvance_force(getviscol());
# endif
firstline = ml_get(oap->start.lnum);
pre_textlen = (long)STRLEN(firstline);
pre_indent = (long)(skipwhite(firstline) - firstline);
bd.textcol = curwin->w_cursor.col;
}
#endif
#if defined(FEAT_LISP) || defined(FEAT_CINDENT)
if (oap->motion_type == MLINE)
fix_indent();
#endif
retval = edit(NUL, FALSE, (linenr_T)1);
#ifdef FEAT_VISUALEXTRA
/*
* In Visual block mode, handle copying the new text to all lines of the
* block.
* Don't repeat the insert when Insert mode ended with CTRL-C.
*/
if (oap->block_mode && oap->start.lnum != oap->end.lnum && !got_int)
{
/* Auto-indenting may have changed the indent. If the cursor was past
* the indent, exclude that indent change from the inserted text. */
firstline = ml_get(oap->start.lnum);
if (bd.textcol > (colnr_T)pre_indent)
{
long new_indent = (long)(skipwhite(firstline) - firstline);
pre_textlen += new_indent - pre_indent;
bd.textcol += new_indent - pre_indent;
}
ins_len = (long)STRLEN(firstline) - pre_textlen;
if (ins_len > 0)
{
/* Subsequent calls to ml_get() flush the firstline data - take a
* copy of the inserted text. */
if ((ins_text = alloc_check((unsigned)(ins_len + 1))) != NULL)
{
vim_strncpy(ins_text, firstline + bd.textcol, (size_t)ins_len);
for (linenr = oap->start.lnum + 1; linenr <= oap->end.lnum;
linenr++)
{
block_prep(oap, &bd, linenr, TRUE);
if (!bd.is_short || virtual_op)
{
# ifdef FEAT_VIRTUALEDIT
pos_T vpos;
/* If the block starts in virtual space, count the
* initial coladd offset as part of "startspaces" */
if (bd.is_short)
{
vpos.lnum = linenr;
(void)getvpos(&vpos, oap->start_vcol);
}
else
vpos.coladd = 0;
# endif
oldp = ml_get(linenr);
newp = alloc_check((unsigned)(STRLEN(oldp)
# ifdef FEAT_VIRTUALEDIT
+ vpos.coladd
# endif
+ ins_len + 1));
if (newp == NULL)
continue;
/* copy up to block start */
mch_memmove(newp, oldp, (size_t)bd.textcol);
offset = bd.textcol;
# ifdef FEAT_VIRTUALEDIT
copy_spaces(newp + offset, (size_t)vpos.coladd);
offset += vpos.coladd;
# endif
mch_memmove(newp + offset, ins_text, (size_t)ins_len);
offset += ins_len;
oldp += bd.textcol;
STRMOVE(newp + offset, oldp);
ml_replace(linenr, newp, FALSE);
}
}
check_cursor();
changed_lines(oap->start.lnum + 1, 0, oap->end.lnum + 1, 0L);
}
vim_free(ins_text);
}
}
#endif
return retval;
}
/*
* set all the yank registers to empty (called from main())
*/
void
init_yank()
{
int i;
for (i = 0; i < NUM_REGISTERS; ++i)
y_regs[i].y_array = NULL;
}
#if defined(EXITFREE) || defined(PROTO)
void
clear_registers()
{
int i;
for (i = 0; i < NUM_REGISTERS; ++i)
{
y_current = &y_regs[i];
if (y_current->y_array != NULL)
free_yank_all();
}
}
#endif
/*
* Free "n" lines from the current yank register.
* Called for normal freeing and in case of error.
*/
static void
free_yank(n)
long n;
{
if (y_current->y_array != NULL)
{
long i;
for (i = n; --i >= 0; )
{
#ifdef AMIGA /* only for very slow machines */
if ((i & 1023) == 1023) /* this may take a while */
{
/*
* This message should never cause a hit-return message.
* Overwrite this message with any next message.
*/
++no_wait_return;
smsg((char_u *)_("freeing %ld lines"), i + 1);
--no_wait_return;
msg_didout = FALSE;
msg_col = 0;
}
#endif
vim_free(y_current->y_array[i]);
}
vim_free(y_current->y_array);
y_current->y_array = NULL;
#ifdef AMIGA
if (n >= 1000)
MSG("");
#endif
}
}
static void
free_yank_all()
{
free_yank(y_current->y_size);
}
/*
* Yank the text between "oap->start" and "oap->end" into a yank register.
* If we are to append (uppercase register), we first yank into a new yank
* register and then concatenate the old and the new one (so we keep the old
* one in case of out-of-memory).
*
* return FAIL for failure, OK otherwise
*/
int
op_yank(oap, deleting, mess)
oparg_T *oap;
int deleting;
int mess;
{
long y_idx; /* index in y_array[] */
struct yankreg *curr; /* copy of y_current */
struct yankreg newreg; /* new yank register when appending */
char_u **new_ptr;
linenr_T lnum; /* current line number */
long j;
int yanktype = oap->motion_type;
long yanklines = oap->line_count;
linenr_T yankendlnum = oap->end.lnum;
char_u *p;
char_u *pnew;
struct block_def bd;
#if defined(FEAT_CLIPBOARD) && defined(FEAT_X11)
int did_star = FALSE;
#endif
/* check for read-only register */
if (oap->regname != 0 && !valid_yank_reg(oap->regname, TRUE))
{
beep_flush();
return FAIL;
}
if (oap->regname == '_') /* black hole: nothing to do */
return OK;
#ifdef FEAT_CLIPBOARD
if (!clip_star.available && oap->regname == '*')
oap->regname = 0;
else if (!clip_plus.available && oap->regname == '+')
oap->regname = 0;
#endif
if (!deleting) /* op_delete() already set y_current */
get_yank_register(oap->regname, TRUE);
curr = y_current;
/* append to existing contents */
if (y_append && y_current->y_array != NULL)
y_current = &newreg;
else
free_yank_all(); /* free previously yanked lines */
/*
* If the cursor was in column 1 before and after the movement, and the
* operator is not inclusive, the yank is always linewise.
*/
if ( oap->motion_type == MCHAR
&& oap->start.col == 0
&& !oap->inclusive
#ifdef FEAT_VISUAL
&& (!oap->is_VIsual || *p_sel == 'o')
&& !oap->block_mode
#endif
&& oap->end.col == 0
&& yanklines > 1)
{
yanktype = MLINE;
--yankendlnum;
--yanklines;
}
y_current->y_size = yanklines;
y_current->y_type = yanktype; /* set the yank register type */
#ifdef FEAT_VISUAL
y_current->y_width = 0;
#endif
y_current->y_array = (char_u **)lalloc_clear((long_u)(sizeof(char_u *) *
yanklines), TRUE);
if (y_current->y_array == NULL)
{
y_current = curr;
return FAIL;
}
y_idx = 0;
lnum = oap->start.lnum;
#ifdef FEAT_VISUAL
if (oap->block_mode)
{
/* Visual block mode */
y_current->y_type = MBLOCK; /* set the yank register type */
y_current->y_width = oap->end_vcol - oap->start_vcol;
if (curwin->w_curswant == MAXCOL && y_current->y_width > 0)
y_current->y_width--;
}
#endif
for ( ; lnum <= yankendlnum; lnum++, y_idx++)
{
switch (y_current->y_type)
{
#ifdef FEAT_VISUAL
case MBLOCK:
block_prep(oap, &bd, lnum, FALSE);
if (yank_copy_line(&bd, y_idx) == FAIL)
goto fail;
break;
#endif
case MLINE:
if ((y_current->y_array[y_idx] =
vim_strsave(ml_get(lnum))) == NULL)
goto fail;
break;
case MCHAR:
{
colnr_T startcol = 0, endcol = MAXCOL;
#ifdef FEAT_VIRTUALEDIT
int is_oneChar = FALSE;
colnr_T cs, ce;
#endif
p = ml_get(lnum);
bd.startspaces = 0;
bd.endspaces = 0;
if (lnum == oap->start.lnum)
{
startcol = oap->start.col;
#ifdef FEAT_VIRTUALEDIT
if (virtual_op)
{
getvcol(curwin, &oap->start, &cs, NULL, &ce);
if (ce != cs && oap->start.coladd > 0)
{
/* Part of a tab selected -- but don't
* double-count it. */
bd.startspaces = (ce - cs + 1)
- oap->start.coladd;
startcol++;
}
}
#endif
}
if (lnum == oap->end.lnum)
{
endcol = oap->end.col;
#ifdef FEAT_VIRTUALEDIT
if (virtual_op)
{
getvcol(curwin, &oap->end, &cs, NULL, &ce);
if (p[endcol] == NUL || (cs + oap->end.coladd < ce
# ifdef FEAT_MBYTE
/* Don't add space for double-wide
* char; endcol will be on last byte
* of multi-byte char. */
&& (*mb_head_off)(p, p + endcol) == 0
# endif
))
{
if (oap->start.lnum == oap->end.lnum
&& oap->start.col == oap->end.col)
{
/* Special case: inside a single char */
is_oneChar = TRUE;
bd.startspaces = oap->end.coladd
- oap->start.coladd + oap->inclusive;
endcol = startcol;
}
else
{
bd.endspaces = oap->end.coladd
+ oap->inclusive;
endcol -= oap->inclusive;
}
}
}
#endif
}
if (endcol == MAXCOL)
endcol = (colnr_T)STRLEN(p);
if (startcol > endcol
#ifdef FEAT_VIRTUALEDIT
|| is_oneChar
#endif
)
bd.textlen = 0;
else
{
bd.textlen = endcol - startcol + oap->inclusive;
}
bd.textstart = p + startcol;
if (yank_copy_line(&bd, y_idx) == FAIL)
goto fail;
break;
}
/* NOTREACHED */
}
}
if (curr != y_current) /* append the new block to the old block */
{
new_ptr = (char_u **)lalloc((long_u)(sizeof(char_u *) *
(curr->y_size + y_current->y_size)), TRUE);
if (new_ptr == NULL)
goto fail;
for (j = 0; j < curr->y_size; ++j)
new_ptr[j] = curr->y_array[j];
vim_free(curr->y_array);
curr->y_array = new_ptr;
if (yanktype == MLINE) /* MLINE overrides MCHAR and MBLOCK */
curr->y_type = MLINE;
/* Concatenate the last line of the old block with the first line of
* the new block, unless being Vi compatible. */
if (curr->y_type == MCHAR && vim_strchr(p_cpo, CPO_REGAPPEND) == NULL)
{
pnew = lalloc((long_u)(STRLEN(curr->y_array[curr->y_size - 1])
+ STRLEN(y_current->y_array[0]) + 1), TRUE);
if (pnew == NULL)
{
y_idx = y_current->y_size - 1;
goto fail;
}
STRCPY(pnew, curr->y_array[--j]);
STRCAT(pnew, y_current->y_array[0]);
vim_free(curr->y_array[j]);
vim_free(y_current->y_array[0]);
curr->y_array[j++] = pnew;
y_idx = 1;
}
else
y_idx = 0;
while (y_idx < y_current->y_size)
curr->y_array[j++] = y_current->y_array[y_idx++];
curr->y_size = j;
vim_free(y_current->y_array);
y_current = curr;
}
if (mess) /* Display message about yank? */
{
if (yanktype == MCHAR
#ifdef FEAT_VISUAL
&& !oap->block_mode
#endif
&& yanklines == 1)
yanklines = 0;
/* Some versions of Vi use ">=" here, some don't... */
if (yanklines > p_report)
{
/* redisplay now, so message is not deleted */
update_topline_redraw();
if (yanklines == 1)
{
#ifdef FEAT_VISUAL
if (oap->block_mode)
MSG(_("block of 1 line yanked"));
else
#endif
MSG(_("1 line yanked"));
}
#ifdef FEAT_VISUAL
else if (oap->block_mode)
smsg((char_u *)_("block of %ld lines yanked"), yanklines);
#endif
else
smsg((char_u *)_("%ld lines yanked"), yanklines);
}
}
/*
* Set "'[" and "']" marks.
*/
curbuf->b_op_start = oap->start;
curbuf->b_op_end = oap->end;
if (yanktype == MLINE
#ifdef FEAT_VISUAL
&& !oap->block_mode
#endif
)
{
curbuf->b_op_start.col = 0;
curbuf->b_op_end.col = MAXCOL;
}
#ifdef FEAT_CLIPBOARD
/*
* If we were yanking to the '*' register, send result to clipboard.
* If no register was specified, and "unnamed" in 'clipboard', make a copy
* to the '*' register.
*/
if (clip_star.available
&& (curr == &(y_regs[STAR_REGISTER])
|| (!deleting && oap->regname == 0
&& (clip_unnamed & CLIP_UNNAMED))))
{
if (curr != &(y_regs[STAR_REGISTER]))
/* Copy the text from register 0 to the clipboard register. */
copy_yank_reg(&(y_regs[STAR_REGISTER]));
clip_own_selection(&clip_star);
clip_gen_set_selection(&clip_star);
# ifdef FEAT_X11
did_star = TRUE;
# endif
}
# ifdef FEAT_X11
/*
* If we were yanking to the '+' register, send result to selection.
* Also copy to the '*' register, in case auto-select is off.
*/
if (clip_plus.available
&& (curr == &(y_regs[PLUS_REGISTER])
|| (!deleting && oap->regname == 0
&& (clip_unnamed & CLIP_UNNAMED_PLUS))))
{
if (curr != &(y_regs[PLUS_REGISTER]))
/* Copy the text from register 0 to the clipboard register. */
copy_yank_reg(&(y_regs[PLUS_REGISTER]));
clip_own_selection(&clip_plus);
clip_gen_set_selection(&clip_plus);
if (!clip_isautosel_star() && !did_star
&& curr == &(y_regs[PLUS_REGISTER]))
{
copy_yank_reg(&(y_regs[STAR_REGISTER]));
clip_own_selection(&clip_star);
clip_gen_set_selection(&clip_star);
}
}
# endif
#endif
return OK;
fail: /* free the allocated lines */
free_yank(y_idx + 1);
y_current = curr;
return FAIL;
}
static int
yank_copy_line(bd, y_idx)
struct block_def *bd;
long y_idx;
{
char_u *pnew;
if ((pnew = alloc(bd->startspaces + bd->endspaces + bd->textlen + 1))
== NULL)
return FAIL;
y_current->y_array[y_idx] = pnew;
copy_spaces(pnew, (size_t)bd->startspaces);
pnew += bd->startspaces;
mch_memmove(pnew, bd->textstart, (size_t)bd->textlen);
pnew += bd->textlen;
copy_spaces(pnew, (size_t)bd->endspaces);
pnew += bd->endspaces;
*pnew = NUL;
return OK;
}
#ifdef FEAT_CLIPBOARD
/*
* Make a copy of the y_current register to register "reg".
*/
static void
copy_yank_reg(reg)
struct yankreg *reg;
{
struct yankreg *curr = y_current;
long j;
y_current = reg;
free_yank_all();
*y_current = *curr;
y_current->y_array = (char_u **)lalloc_clear(
(long_u)(sizeof(char_u *) * y_current->y_size), TRUE);
if (y_current->y_array == NULL)
y_current->y_size = 0;
else
for (j = 0; j < y_current->y_size; ++j)
if ((y_current->y_array[j] = vim_strsave(curr->y_array[j])) == NULL)
{
free_yank(j);
y_current->y_size = 0;
break;
}
y_current = curr;
}
#endif
/*
* Put contents of register "regname" into the text.
* Caller must check "regname" to be valid!
* "flags": PUT_FIXINDENT make indent look nice
* PUT_CURSEND leave cursor after end of new text
* PUT_LINE force linewise put (":put")
*/
void
do_put(regname, dir, count, flags)
int regname;
int dir; /* BACKWARD for 'P', FORWARD for 'p' */
long count;
int flags;
{
char_u *ptr;
char_u *newp, *oldp;
int yanklen;
int totlen = 0; /* init for gcc */
linenr_T lnum;
colnr_T col;
long i; /* index in y_array[] */
int y_type;
long y_size;
#ifdef FEAT_VISUAL
int oldlen;
long y_width = 0;
colnr_T vcol;
int delcount;
int incr = 0;
long j;
struct block_def bd;
#endif
char_u **y_array = NULL;
long nr_lines = 0;
pos_T new_cursor;
int indent;
int orig_indent = 0; /* init for gcc */
int indent_diff = 0; /* init for gcc */
int first_indent = TRUE;
int lendiff = 0;
pos_T old_pos;
char_u *insert_string = NULL;
int allocated = FALSE;
long cnt;
#ifdef FEAT_CLIPBOARD
/* Adjust register name for "unnamed" in 'clipboard'. */
adjust_clip_reg(&regname);
(void)may_get_selection(regname);
#endif
if (flags & PUT_FIXINDENT)
orig_indent = get_indent();
curbuf->b_op_start = curwin->w_cursor; /* default for '[ mark */
curbuf->b_op_end = curwin->w_cursor; /* default for '] mark */
/*
* Using inserted text works differently, because the register includes
* special characters (newlines, etc.).
*/
if (regname == '.')
{
(void)stuff_inserted((dir == FORWARD ? (count == -1 ? 'o' : 'a') :
(count == -1 ? 'O' : 'i')), count, FALSE);
/* Putting the text is done later, so can't really move the cursor to
* the next character. Use "l" to simulate it. */
if ((flags & PUT_CURSEND) && gchar_cursor() != NUL)
stuffcharReadbuff('l');
return;
}
/*
* For special registers '%' (file name), '#' (alternate file name) and
* ':' (last command line), etc. we have to create a fake yank register.
*/
if (get_spec_reg(regname, &insert_string, &allocated, TRUE))
{
if (insert_string == NULL)
return;
}
if (insert_string != NULL)
{
y_type = MCHAR;
#ifdef FEAT_EVAL
if (regname == '=')
{
/* For the = register we need to split the string at NL
* characters.
* Loop twice: count the number of lines and save them. */
for (;;)
{
y_size = 0;
ptr = insert_string;
while (ptr != NULL)
{
if (y_array != NULL)
y_array[y_size] = ptr;
++y_size;
ptr = vim_strchr(ptr, '\n');
if (ptr != NULL)
{
if (y_array != NULL)
*ptr = NUL;
++ptr;
/* A trailing '\n' makes the register linewise. */
if (*ptr == NUL)
{
y_type = MLINE;
break;
}
}
}
if (y_array != NULL)
break;
y_array = (char_u **)alloc((unsigned)
(y_size * sizeof(char_u *)));
if (y_array == NULL)
goto end;
}
}
else
#endif
{
y_size = 1; /* use fake one-line yank register */
y_array = &insert_string;
}
}
else
{
get_yank_register(regname, FALSE);
y_type = y_current->y_type;
#ifdef FEAT_VISUAL
y_width = y_current->y_width;
#endif
y_size = y_current->y_size;
y_array = y_current->y_array;
}
#ifdef FEAT_VISUAL
if (y_type == MLINE)
{
if (flags & PUT_LINE_SPLIT)
{
/* "p" or "P" in Visual mode: split the lines to put the text in
* between. */
if (u_save_cursor() == FAIL)
goto end;
ptr = vim_strsave(ml_get_cursor());
if (ptr == NULL)
goto end;
ml_append(curwin->w_cursor.lnum, ptr, (colnr_T)0, FALSE);
vim_free(ptr);
ptr = vim_strnsave(ml_get_curline(), curwin->w_cursor.col);
if (ptr == NULL)
goto end;
ml_replace(curwin->w_cursor.lnum, ptr, FALSE);
++nr_lines;
dir = FORWARD;
}
if (flags & PUT_LINE_FORWARD)
{
/* Must be "p" for a Visual block, put lines below the block. */
curwin->w_cursor = curbuf->b_visual.vi_end;
dir = FORWARD;
}
curbuf->b_op_start = curwin->w_cursor; /* default for '[ mark */
curbuf->b_op_end = curwin->w_cursor; /* default for '] mark */
}
#endif
if (flags & PUT_LINE) /* :put command or "p" in Visual line mode. */
y_type = MLINE;
if (y_size == 0 || y_array == NULL)
{
EMSG2(_("E353: Nothing in register %s"),
regname == 0 ? (char_u *)"\"" : transchar(regname));
goto end;
}
#ifdef FEAT_VISUAL
if (y_type == MBLOCK)
{
lnum = curwin->w_cursor.lnum + y_size + 1;
if (lnum > curbuf->b_ml.ml_line_count)
lnum = curbuf->b_ml.ml_line_count + 1;
if (u_save(curwin->w_cursor.lnum - 1, lnum) == FAIL)
goto end;
}
else
#endif
if (y_type == MLINE)
{
lnum = curwin->w_cursor.lnum;
#ifdef FEAT_FOLDING
/* Correct line number for closed fold. Don't move the cursor yet,
* u_save() uses it. */
if (dir == BACKWARD)
(void)hasFolding(lnum, &lnum, NULL);
else
(void)hasFolding(lnum, NULL, &lnum);
#endif
if (dir == FORWARD)
++lnum;
if (u_save(lnum - 1, lnum) == FAIL)
goto end;
#ifdef FEAT_FOLDING
if (dir == FORWARD)
curwin->w_cursor.lnum = lnum - 1;
else
curwin->w_cursor.lnum = lnum;
curbuf->b_op_start = curwin->w_cursor; /* for mark_adjust() */
#endif
}
else if (u_save_cursor() == FAIL)
goto end;
yanklen = (int)STRLEN(y_array[0]);
#ifdef FEAT_VIRTUALEDIT
if (ve_flags == VE_ALL && y_type == MCHAR)
{
if (gchar_cursor() == TAB)
{
/* Don't need to insert spaces when "p" on the last position of a
* tab or "P" on the first position. */
if (dir == FORWARD
? (int)curwin->w_cursor.coladd < curbuf->b_p_ts - 1
: curwin->w_cursor.coladd > 0)
coladvance_force(getviscol());
else
curwin->w_cursor.coladd = 0;
}
else if (curwin->w_cursor.coladd > 0 || gchar_cursor() == NUL)
coladvance_force(getviscol() + (dir == FORWARD));
}
#endif
lnum = curwin->w_cursor.lnum;
col = curwin->w_cursor.col;
#ifdef FEAT_VISUAL
/*
* Block mode
*/
if (y_type == MBLOCK)
{
char c = gchar_cursor();
colnr_T endcol2 = 0;
if (dir == FORWARD && c != NUL)
{
#ifdef FEAT_VIRTUALEDIT
if (ve_flags == VE_ALL)
getvcol(curwin, &curwin->w_cursor, &col, NULL, &endcol2);
else
#endif
getvcol(curwin, &curwin->w_cursor, NULL, NULL, &col);
#ifdef FEAT_MBYTE
if (has_mbyte)
/* move to start of next multi-byte character */
curwin->w_cursor.col += (*mb_ptr2len)(ml_get_cursor());
else
#endif
#ifdef FEAT_VIRTUALEDIT
if (c != TAB || ve_flags != VE_ALL)
#endif
++curwin->w_cursor.col;
++col;
}
else
getvcol(curwin, &curwin->w_cursor, &col, NULL, &endcol2);
#ifdef FEAT_VIRTUALEDIT
col += curwin->w_cursor.coladd;
if (ve_flags == VE_ALL
&& (curwin->w_cursor.coladd > 0
|| endcol2 == curwin->w_cursor.col))
{
if (dir == FORWARD && c == NUL)
++col;
if (dir != FORWARD && c != NUL)
++curwin->w_cursor.col;
if (c == TAB)
{
if (dir == BACKWARD && curwin->w_cursor.col)
curwin->w_cursor.col--;
if (dir == FORWARD && col - 1 == endcol2)
curwin->w_cursor.col++;
}
}
curwin->w_cursor.coladd = 0;
#endif
bd.textcol = 0;
for (i = 0; i < y_size; ++i)
{
int spaces;
char shortline;
bd.startspaces = 0;
bd.endspaces = 0;
vcol = 0;
delcount = 0;
/* add a new line */
if (curwin->w_cursor.lnum > curbuf->b_ml.ml_line_count)
{
if (ml_append(curbuf->b_ml.ml_line_count, (char_u *)"",
(colnr_T)1, FALSE) == FAIL)
break;
++nr_lines;
}
/* get the old line and advance to the position to insert at */
oldp = ml_get_curline();
oldlen = (int)STRLEN(oldp);
for (ptr = oldp; vcol < col && *ptr; )
{
/* Count a tab for what it's worth (if list mode not on) */
incr = lbr_chartabsize_adv(&ptr, (colnr_T)vcol);
vcol += incr;
}
bd.textcol = (colnr_T)(ptr - oldp);
shortline = (vcol < col) || (vcol == col && !*ptr) ;
if (vcol < col) /* line too short, padd with spaces */
bd.startspaces = col - vcol;
else if (vcol > col)
{
bd.endspaces = vcol - col;
bd.startspaces = incr - bd.endspaces;
--bd.textcol;
delcount = 1;
#ifdef FEAT_MBYTE
if (has_mbyte)
bd.textcol -= (*mb_head_off)(oldp, oldp + bd.textcol);
#endif
if (oldp[bd.textcol] != TAB)
{
/* Only a Tab can be split into spaces. Other
* characters will have to be moved to after the
* block, causing misalignment. */
delcount = 0;
bd.endspaces = 0;
}
}
yanklen = (int)STRLEN(y_array[i]);
/* calculate number of spaces required to fill right side of block*/
spaces = y_width + 1;
for (j = 0; j < yanklen; j++)
spaces -= lbr_chartabsize(&y_array[i][j], 0);
if (spaces < 0)
spaces = 0;
/* insert the new text */
totlen = count * (yanklen + spaces) + bd.startspaces + bd.endspaces;
newp = alloc_check((unsigned)totlen + oldlen + 1);
if (newp == NULL)
break;
/* copy part up to cursor to new line */
ptr = newp;
mch_memmove(ptr, oldp, (size_t)bd.textcol);
ptr += bd.textcol;
/* may insert some spaces before the new text */
copy_spaces(ptr, (size_t)bd.startspaces);
ptr += bd.startspaces;
/* insert the new text */
for (j = 0; j < count; ++j)
{
mch_memmove(ptr, y_array[i], (size_t)yanklen);
ptr += yanklen;
/* insert block's trailing spaces only if there's text behind */
if ((j < count - 1 || !shortline) && spaces)
{
copy_spaces(ptr, (size_t)spaces);
ptr += spaces;
}
}
/* may insert some spaces after the new text */
copy_spaces(ptr, (size_t)bd.endspaces);
ptr += bd.endspaces;
/* move the text after the cursor to the end of the line. */
mch_memmove(ptr, oldp + bd.textcol + delcount,
(size_t)(oldlen - bd.textcol - delcount + 1));
ml_replace(curwin->w_cursor.lnum, newp, FALSE);
++curwin->w_cursor.lnum;
if (i == 0)
curwin->w_cursor.col += bd.startspaces;
}
changed_lines(lnum, 0, curwin->w_cursor.lnum, nr_lines);
/* Set '[ mark. */
curbuf->b_op_start = curwin->w_cursor;
curbuf->b_op_start.lnum = lnum;
/* adjust '] mark */
curbuf->b_op_end.lnum = curwin->w_cursor.lnum - 1;
curbuf->b_op_end.col = bd.textcol + totlen - 1;
# ifdef FEAT_VIRTUALEDIT
curbuf->b_op_end.coladd = 0;
# endif
if (flags & PUT_CURSEND)
{
colnr_T len;
curwin->w_cursor = curbuf->b_op_end;
curwin->w_cursor.col++;
/* in Insert mode we might be after the NUL, correct for that */
len = (colnr_T)STRLEN(ml_get_curline());
if (curwin->w_cursor.col > len)
curwin->w_cursor.col = len;
}
else
curwin->w_cursor.lnum = lnum;
}
else
#endif
{
/*
* Character or Line mode
*/
if (y_type == MCHAR)
{
/* if type is MCHAR, FORWARD is the same as BACKWARD on the next
* char */
if (dir == FORWARD && gchar_cursor() != NUL)
{
#ifdef FEAT_MBYTE
if (has_mbyte)
{
int bytelen = (*mb_ptr2len)(ml_get_cursor());
/* put it on the next of the multi-byte character. */
col += bytelen;
if (yanklen)
{
curwin->w_cursor.col += bytelen;
curbuf->b_op_end.col += bytelen;
}
}
else
#endif
{
++col;
if (yanklen)
{
++curwin->w_cursor.col;
++curbuf->b_op_end.col;
}
}
}
curbuf->b_op_start = curwin->w_cursor;
}
/*
* Line mode: BACKWARD is the same as FORWARD on the previous line
*/
else if (dir == BACKWARD)
--lnum;
new_cursor = curwin->w_cursor;
/*
* simple case: insert into current line
*/
if (y_type == MCHAR && y_size == 1)
{
totlen = count * yanklen;
if (totlen)
{
oldp = ml_get(lnum);
newp = alloc_check((unsigned)(STRLEN(oldp) + totlen + 1));
if (newp == NULL)
goto end; /* alloc() will give error message */
mch_memmove(newp, oldp, (size_t)col);
ptr = newp + col;
for (i = 0; i < count; ++i)
{
mch_memmove(ptr, y_array[0], (size_t)yanklen);
ptr += yanklen;
}
STRMOVE(ptr, oldp + col);
ml_replace(lnum, newp, FALSE);
/* Put cursor on last putted char. */
curwin->w_cursor.col += (colnr_T)(totlen - 1);
}
curbuf->b_op_end = curwin->w_cursor;
/* For "CTRL-O p" in Insert mode, put cursor after last char */
if (totlen && (restart_edit != 0 || (flags & PUT_CURSEND)))
++curwin->w_cursor.col;
changed_bytes(lnum, col);
}
else
{
/*
* Insert at least one line. When y_type is MCHAR, break the first
* line in two.
*/
for (cnt = 1; cnt <= count; ++cnt)
{
i = 0;
if (y_type == MCHAR)
{
/*
* Split the current line in two at the insert position.
* First insert y_array[size - 1] in front of second line.
* Then append y_array[0] to first line.
*/
lnum = new_cursor.lnum;
ptr = ml_get(lnum) + col;
totlen = (int)STRLEN(y_array[y_size - 1]);
newp = alloc_check((unsigned)(STRLEN(ptr) + totlen + 1));
if (newp == NULL)
goto error;
STRCPY(newp, y_array[y_size - 1]);
STRCAT(newp, ptr);
/* insert second line */
ml_append(lnum, newp, (colnr_T)0, FALSE);
vim_free(newp);
oldp = ml_get(lnum);
newp = alloc_check((unsigned)(col + yanklen + 1));
if (newp == NULL)
goto error;
/* copy first part of line */
mch_memmove(newp, oldp, (size_t)col);
/* append to first line */
mch_memmove(newp + col, y_array[0], (size_t)(yanklen + 1));
ml_replace(lnum, newp, FALSE);
curwin->w_cursor.lnum = lnum;
i = 1;
}
for (; i < y_size; ++i)
{
if ((y_type != MCHAR || i < y_size - 1)
&& ml_append(lnum, y_array[i], (colnr_T)0, FALSE)
== FAIL)
goto error;
lnum++;
++nr_lines;
if (flags & PUT_FIXINDENT)
{
old_pos = curwin->w_cursor;
curwin->w_cursor.lnum = lnum;
ptr = ml_get(lnum);
if (cnt == count && i == y_size - 1)
lendiff = (int)STRLEN(ptr);
#if defined(FEAT_SMARTINDENT) || defined(FEAT_CINDENT)
if (*ptr == '#' && preprocs_left())
indent = 0; /* Leave # lines at start */
else
#endif
if (*ptr == NUL)
indent = 0; /* Ignore empty lines */
else if (first_indent)
{
indent_diff = orig_indent - get_indent();
indent = orig_indent;
first_indent = FALSE;
}
else if ((indent = get_indent() + indent_diff) < 0)
indent = 0;
(void)set_indent(indent, 0);
curwin->w_cursor = old_pos;
/* remember how many chars were removed */
if (cnt == count && i == y_size - 1)
lendiff -= (int)STRLEN(ml_get(lnum));
}
}
}
error:
/* Adjust marks. */
if (y_type == MLINE)
{
curbuf->b_op_start.col = 0;
if (dir == FORWARD)
curbuf->b_op_start.lnum++;
}
mark_adjust(curbuf->b_op_start.lnum + (y_type == MCHAR),
(linenr_T)MAXLNUM, nr_lines, 0L);
/* note changed text for displaying and folding */
if (y_type == MCHAR)
changed_lines(curwin->w_cursor.lnum, col,
curwin->w_cursor.lnum + 1, nr_lines);
else
changed_lines(curbuf->b_op_start.lnum, 0,
curbuf->b_op_start.lnum, nr_lines);
/* put '] mark at last inserted character */
curbuf->b_op_end.lnum = lnum;
/* correct length for change in indent */
col = (colnr_T)STRLEN(y_array[y_size - 1]) - lendiff;
if (col > 1)
curbuf->b_op_end.col = col - 1;
else
curbuf->b_op_end.col = 0;
if (flags & PUT_CURSLINE)
{
/* ":put": put cursor on last inserted line */
curwin->w_cursor.lnum = lnum;
beginline(BL_WHITE | BL_FIX);
}
else if (flags & PUT_CURSEND)
{
/* put cursor after inserted text */
if (y_type == MLINE)
{
if (lnum >= curbuf->b_ml.ml_line_count)
curwin->w_cursor.lnum = curbuf->b_ml.ml_line_count;
else
curwin->w_cursor.lnum = lnum + 1;
curwin->w_cursor.col = 0;
}
else
{
curwin->w_cursor.lnum = lnum;
curwin->w_cursor.col = col;
}
}
else if (y_type == MLINE)
{
/* put cursor on first non-blank in first inserted line */
curwin->w_cursor.col = 0;
if (dir == FORWARD)
++curwin->w_cursor.lnum;
beginline(BL_WHITE | BL_FIX);
}
else /* put cursor on first inserted character */
curwin->w_cursor = new_cursor;
}
}
msgmore(nr_lines);
curwin->w_set_curswant = TRUE;
end:
if (allocated)
vim_free(insert_string);
if (regname == '=')
vim_free(y_array);
/* If the cursor is past the end of the line put it at the end. */
adjust_cursor_eol();
}
/*
* When the cursor is on the NUL past the end of the line and it should not be
* there move it left.
*/
void
adjust_cursor_eol()
{
if (curwin->w_cursor.col > 0
&& gchar_cursor() == NUL
#ifdef FEAT_VIRTUALEDIT
&& (ve_flags & VE_ONEMORE) == 0
#endif
&& !(restart_edit || (State & INSERT)))
{
/* Put the cursor on the last character in the line. */
dec_cursor();
#ifdef FEAT_VIRTUALEDIT
if (ve_flags == VE_ALL)
{
colnr_T scol, ecol;
/* Coladd is set to the width of the last character. */
getvcol(curwin, &curwin->w_cursor, &scol, NULL, &ecol);
curwin->w_cursor.coladd = ecol - scol + 1;
}
#endif
}
}
#if defined(FEAT_SMARTINDENT) || defined(FEAT_CINDENT) || defined(PROTO)
/*
* Return TRUE if lines starting with '#' should be left aligned.
*/
int
preprocs_left()
{
return
# ifdef FEAT_SMARTINDENT
# ifdef FEAT_CINDENT
(curbuf->b_p_si && !curbuf->b_p_cin) ||
# else
curbuf->b_p_si
# endif
# endif
# ifdef FEAT_CINDENT
(curbuf->b_p_cin && in_cinkeys('#', ' ', TRUE))
# endif
;
}
#endif
/* Return the character name of the register with the given number */
int
get_register_name(num)
int num;
{
if (num == -1)
return '"';
else if (num < 10)
return num + '0';
else if (num == DELETION_REGISTER)
return '-';
#ifdef FEAT_CLIPBOARD
else if (num == STAR_REGISTER)
return '*';
else if (num == PLUS_REGISTER)
return '+';
#endif
else
{
#ifdef EBCDIC
int i;
/* EBCDIC is really braindead ... */
i = 'a' + (num - 10);
if (i > 'i')
i += 7;
if (i > 'r')
i += 8;
return i;
#else
return num + 'a' - 10;
#endif
}
}
/*
* ":dis" and ":registers": Display the contents of the yank registers.
*/
void
ex_display(eap)
exarg_T *eap;
{
int i, n;
long j;
char_u *p;
struct yankreg *yb;
int name;
int attr;
char_u *arg = eap->arg;
#ifdef FEAT_MBYTE
int clen;
#else
# define clen 1
#endif
if (arg != NULL && *arg == NUL)
arg = NULL;
attr = hl_attr(HLF_8);
/* Highlight title */
MSG_PUTS_TITLE(_("\n--- Registers ---"));
for (i = -1; i < NUM_REGISTERS && !got_int; ++i)
{
name = get_register_name(i);
if (arg != NULL && vim_strchr(arg, name) == NULL
#ifdef ONE_CLIPBOARD
/* Star register and plus register contain the same thing. */
&& (name != '*' || vim_strchr(arg, '+') == NULL)
#endif
)
continue; /* did not ask for this register */
#ifdef FEAT_CLIPBOARD
/* Adjust register name for "unnamed" in 'clipboard'.
* When it's a clipboard register, fill it with the current contents
* of the clipboard. */
adjust_clip_reg(&name);
(void)may_get_selection(name);
#endif
if (i == -1)
{
if (y_previous != NULL)
yb = y_previous;
else
yb = &(y_regs[0]);
}
else
yb = &(y_regs[i]);
#ifdef FEAT_EVAL
if (name == MB_TOLOWER(redir_reg)
|| (redir_reg == '"' && yb == y_previous))
continue; /* do not list register being written to, the
* pointer can be freed */
#endif
if (yb->y_array != NULL)
{
msg_putchar('\n');
msg_putchar('"');
msg_putchar(name);
MSG_PUTS(" ");
n = (int)Columns - 6;
for (j = 0; j < yb->y_size && n > 1; ++j)
{
if (j)
{
MSG_PUTS_ATTR("^J", attr);
n -= 2;
}
for (p = yb->y_array[j]; *p && (n -= ptr2cells(p)) >= 0; ++p)
{
#ifdef FEAT_MBYTE
clen = (*mb_ptr2len)(p);
#endif
msg_outtrans_len(p, clen);
#ifdef FEAT_MBYTE
p += clen - 1;
#endif
}
}
if (n > 1 && yb->y_type == MLINE)
MSG_PUTS_ATTR("^J", attr);
out_flush(); /* show one line at a time */
}
ui_breakcheck();
}
/*
* display last inserted text
*/
if ((p = get_last_insert()) != NULL
&& (arg == NULL || vim_strchr(arg, '.') != NULL) && !got_int)
{
MSG_PUTS("\n\". ");
dis_msg(p, TRUE);
}
/*
* display last command line
*/
if (last_cmdline != NULL && (arg == NULL || vim_strchr(arg, ':') != NULL)
&& !got_int)
{
MSG_PUTS("\n\": ");
dis_msg(last_cmdline, FALSE);
}
/*
* display current file name
*/
if (curbuf->b_fname != NULL
&& (arg == NULL || vim_strchr(arg, '%') != NULL) && !got_int)
{
MSG_PUTS("\n\"% ");
dis_msg(curbuf->b_fname, FALSE);
}
/*
* display alternate file name
*/
if ((arg == NULL || vim_strchr(arg, '%') != NULL) && !got_int)
{
char_u *fname;
linenr_T dummy;