Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with HTTPS or Subversion.

Download ZIP
Fetching contributors…

Cannot retrieve contributors at this time

2937 lines (2558 sloc) 115.508 kb
# Makefile for Vim on Unix and Unix-like systems vim:ts=8:sw=8:tw=78
#
# This Makefile is loosely based on the GNU Makefile conventions found in
# standards.info.
#
# Compiling Vim, summary:
#
# 3. make
# 5. make install
#
# Compiling Vim, details:
#
# Edit this file for adjusting to your system. You should not need to edit any
# other file for machine specific things!
# The name of this file MUST be Makefile (note the uppercase 'M').
#
# 1. Edit this Makefile {{{1
# The defaults for Vim should work on most machines, but you may want to
# uncomment some lines or make other changes below to tune it to your
# system, compiler or preferences. Uncommenting means that the '#' in
# the first column of a line is removed.
# - If you want a version of Vim that is small and starts up quickly,
# you might want to disable the GUI, X11, Perl, Python and Tcl.
# - Uncomment the line with --disable-gui if you have Motif, GTK and/or
# Athena but don't want to make gvim (the GUI version of Vim with nice
# menus and scrollbars, but makes Vim bigger and startup slower).
# - Uncomment --disable-darwin if on Mac OS X but you want to compile a
# Unix version.
# - Uncomment the line "CONF_OPT_X = --without-x" if you have X11 but
# want to disable using X11 libraries. This speeds up starting Vim,
# but the window title will not be set and the X11 selection can not
# used.
# - Uncomment the line "CONF_OPT_XSMP = --without-xsmp" if you have the
# X11 Session Management Protocol (XSMP) library (libSM) but do not
# want to use it.
# This can speedup Vim startup but Vim loses the ability to catch the
# user logging out from session-managers like GNOME and work
# could be lost.
# - Uncomment one or more of these lines to include an interface;
# each makes Vim quite a bit bigger:
# --enable-perlinterp for Perl interpreter
# --enable-pythoninterp for Python interpreter
# --enable-rubyinterp for Ruby interpreter
# --enable-tclinterp for Tcl interpreter
# --enable-cscope for Cscope interface
# - Uncomment one of the lines with --with-features= to enable a set of
# features (but not the interfaces just mentioned).
# - Uncomment the line with --disable-acl to disable ACL support even
# though your system supports it.
# - Uncomment the line with --disable-gpm to disable gpm support
# even though you have gpm libraries and includes
# - Uncomment one of the lines with CFLAGS and/or CC if you have
# something very special or want to tune the optimizer.
# - Search for the name of your system to see if it needs anything
# special.
# - A few versions of make use '.include "file"' instead of 'include
# file'. Adjust the include line below if yours does.
#
# 2. Edit feature.h {{{1
# Only if you do not agree with the default compile features, e.g.:
# - you want Vim to be as vi compatible as it can be
# - you want to use Emacs tags files
# - you want right-to-left editing (Hebrew)
# - you want 'langmap' support (Greek)
# - you want to remove features to make Vim smaller
#
# 3. "make" {{{1
# Will first run ./configure with the options in this file. Then it will
# start make again on this Makefile to do the compiling. You can also do
# this in two steps with:
# make config
# make
# The configuration phase creates/overwrites auto/config.h and
# auto/config.mk.
# The configure script is created with "make autoconf". It can detect
# different features of your system and act accordingly. However, it is
# not correct for all systems. Check this:
# - If you have X windows, but configure could not find it or reported
# another include/library directory then you wanted to use, you have
# to set CONF_OPT_X below. You might also check the installation of
# xmkmf.
# - If you have --enable-gui=motif and have Motif on your system, but
# configure reports "checking for location of gui... <not found>", you
# have to set GUI_INC_LOC and GUI_LIB_LOC below.
# If you changed something, do this to run configure again:
# make reconfig
#
# - If you do not trust the automatic configuration code, then inspect
# auto/config.h and auto/config.mk, before starting the actual build
# phase. If possible edit this Makefile, rather than auto/config.mk --
# especially look at the definition of VIMLOC below. Note that the
# configure phase overwrites auto/config.mk and auto/config.h again.
# - If you get error messages, find out what is wrong and try to correct
# it in this Makefile. You may need to do "make reconfig" when you
# change anything that configure uses (e.g. switching from an old C
# compiler to an ANSI C compiler). Only when auto/configure does
# something wrong you may need to change one of the other files. If
# you find a clean way to fix the problem, consider sending a note to
# the author of autoconf (bug-gnu-utils@prep.ai.mit.edu) or Vim
# (Bram@vim.org). Don't bother to do that when you made a hack
# solution for a non-standard system.
#
# 4. "make test" {{{1
# This is optional. This will run Vim scripts on a number of test
# files, and compare the produced output with the expected output.
# If all is well, you will get the "ALL DONE" message in the end. See
# below (search for "/^test").
#
# 5. "make install" {{{1
# If the new Vim seems to be working OK you can install it and the
# documentation in the appropriate location. The default is
# "/usr/local". Change "prefix" below to change the location.
# "auto/pathdef.c" will be compiled again after changing this to make
# the executable know where the help files are located.
# Note that any existing executable is removed or overwritten. If you
# want to keep it you will have to make a backup copy first.
# The runtime files are in a different directory for each version. You
# might want to delete an older version.
# If you don't want to install everything, there are other targets:
# make installvim only installs Vim, not the tools
# make installvimbin only installs the Vim executable
# make installruntime installs most of the runtime files
# make installrtbase only installs the Vim help and
# runtime files
# make installlinks only installs the Vim binary links
# make installmanlinks only installs the Vim manpage links
# make installmacros only installs the Vim macros
# make installtutorbin only installs the Vim tutor program
# make installtutor only installs the Vim tutor files
# make installspell only installs the spell files
# make installtools only installs xxd
# If you install Vim, not to install for real but to prepare a package
# or RPM, set DESTDIR to the root of the tree.
#
# 6. Use Vim until a new version comes out. {{{1
#
# 7. "make uninstall_runtime" {{{1
# Will remove the runtime files for the current version. This is safe
# to use while another version is being used, only version-specific
# files will be deleted.
# To remove the runtime files of another version:
# make uninstall_runtime VIMRTDIR=/vim54
# If you want to delete all installed files, use:
# make uninstall
# Note that this will delete files that have the same name for any
# version, thus you might need to do a "make install" soon after this.
# Be careful not to remove a version of Vim that is still being used!
# To find out which files and directories will be deleted, use:
# make -n uninstall
# }}}
#
### This Makefile has been successfully tested on many systems. {{{
### Only the ones that require special options are mentioned here.
### Check the (*) column for remarks, listed below.
### Later code changes may cause small problems, otherwise Vim is supposed to
### compile and run without problems.
#system: configurations: version (*) tested by:
#------------- ------------------------ ------- - ----------
#AIX 3.2.5 cc (not gcc) - 4.5 (M) Will Fiveash
#AIX 4 cc +X11 -GUI 3.27 (4) Axel Kielhorn
#AIX 4.1.4 cc +X11 +GUI 4.5 (5) Nico Bakker
#AIX 4.2.1 cc 5.2k (C) Will Fiveash
#AIX 4.3.3.12 xic 3.6.6 5.6 (5) David R. Favor
#A/UX 3.1.1 gcc +X11 4.0 (6) Jim Jagielski
#BeOS PR mwcc DR3 5.0n (T) Olaf Seibert
#BSDI 2.1 (x86) shlicc2 gcc-2.6.3 -X11 X11R6 4.5 (1) Jos Backus
#BSD/OS 3.0 (x86) gcc gcc-2.7.2.1 -X11 X11R6 4.6c (1) Jos Backus
#CX/UX 6.2 cc +X11 +GUI_Mofif 5.4 (V) Kipp E. Howard
#DG/UX 5.4* gcc 2.5.8 GUI 5.0e (H) Jonas Schlein
#DG/UX 5.4R4.20 gcc 2.7.2 GUI 5.0s (H) Rocky Olive
#HP-UX (most) c89 cc 5.1 (2) Bram Moolenaar
#HP-UX_9.04 cc +X11 +Motif 5.0 (2) Carton Lao
#Irix 6.3 (O2) cc ? 4.5 (L) Edouard Poor
#Irix 6.4 cc ? 5.0m (S) Rick Sayre
#Irix 6.5 cc ? 6.0 (S) David Harrison
#Irix 64 bit 4.5 (K) Jon Wright
#Linux 2.0 gcc-2.7.2 Infomagic Motif 4.3 (3) Ronald Rietman
#Linux 2.0.31 gcc +X11 +GUI Athena 5.0w (U) Darren Hiebert
#LynxOS 3.0.1 2.9-gnupro-98r2 +X11 +GUI Athena 5.7.1(O) Lorenz Hahn
#LynxOS 3.1.0 2.9-gnupro-98r2 +X11 +GUI Athena 5.7.1(O) Lorenz Hahn
#NEC UP4800 UNIX_SV 4.2MP cc +X11R6 Motif,Athena4.6b (Q) Lennart Schultz
#NetBSD 1.0A gcc-2.4.5 -X11 -GUI 3.21 (X) Juergen Weigert
#QNX 4.2 wcc386-10.6 -X11 4.2 (D) G.F. Desrochers
#QNX 4.23 Watcom -X11 4.2 (F) John Oleynick
#SCO Unix v3.2.5 cc +X11 Motif 3.27 (C) M. Kuperblum
#SCO Open Server 5 gcc 2.7.2.3 +X11 +GUI Motif 5.3 (A) Glauber Ribeiro
#SINIX-N 5.43 RM400 R4000 cc +X11 +GUI 5.0l (I) Martin Furter
#SINIX-Z 5.42 i386 gcc 2.7.2.3 +X11 +GUI Motif 5.1 (I) Joachim Fehn
#SINIX-Y 5.43 RM600 R4000 gcc 2.7.2.3 +X11 +GUI Motif 5.1 (I) Joachim Fehn
#Reliant/SINIX 5.44 cc +X11 +GUI 5.5a (I) B. Pruemmer
#SNI Targon31 TOS 4.1.11 gcc-2.4.5 +X11 -GUI 4.6c (B) Paul Slootman
#Solaris 2.4 (Sparc) cc +X11 +GUI 3.29 (9) Glauber
#Solaris 2.4/2.5 clcc +X11 -GUI openwin 3.20 (7) Robert Colon
#Solaris 2.5 (sun4m) cc (SC4.0) +X11R6 +GUI (CDE) 4.6b (E) Andrew Large
#Solaris 2.5 cc +X11 +GUI Athena 4.2 (9) Sonia Heimann
#Solaris 2.5 gcc 2.5.6 +X11 Motif 5.0m (R) Ant. Colombo
#Solaris 2.6 gcc 2.8.1 ncursus 5.3 (G) Larry W. Virden
#Solaris with -lthread 5.5 (W) K. Nagano
#Solaris gcc (b) Riccardo
#SunOS 4.1.x +X11 -GUI 5.1b (J) Bram Moolenaar
#SunOS 4.1.3_U1 (sun4c) gcc +X11 +GUI Athena 5.0w (J) Darren Hiebert
#SUPER-UX 6.2 (NEC SX-4) cc +X11R6 Motif,Athena4.6b (P) Lennart Schultz
#Tandem/NSK (c) Matthew Woehlke
#Unisys 6035 cc +X11 Motif 5.3 (8) Glauber Ribeiro
#ESIX V4.2 cc +X11 6.0 (a) Reinhard Wobst
#Mac OS X 10.[23] gcc Carbon 6.2 (x) Bram Moolenaar
# }}}
# (*) Remarks: {{{
#
# (1) Uncomment line below for shlicc2
# (2) HPUX with compile problems or wrong digraphs, uncomment line below
# (3) Infomagic Motif needs GUI_LIB_LOC and GUI_INC_LOC set, see below.
# And add "-lXpm" to MOTIF_LIBS2.
# (4) For cc the optimizer must be disabled (use CFLAGS= after running
# configure) (symptom: ":set termcap" output looks weird).
# (5) Compiler may need extra argument, see below.
# (6) See below for a few lines to uncomment
# (7) See below for lines which enable the use of clcc
# (8) Needs some EXTRA_LIBS, search for Unisys below
# (9) Needs an extra compiler flag to compile gui_at_sb.c, see below.
# (A) May need EXTRA_LIBS, see below
# (B) Can't compile GUI because there is no waitpid()... Disable GUI below.
# (C) Force the use of curses instead of termcap, see below.
# (D) Uncomment lines below for QNX
# (E) You might want to use termlib instead of termcap, see below.
# (F) See below for instructions.
# (G) Using ncursus version 4.2 has reported to cause a crash. Use the
# Sun cursus library instead.
# (H) See line for EXTRA_LIBS below.
# (I) SINIX-N 5.42 and 5.43 need some EXTRA_LIBS. Also for Reliant-Unix.
# (J) If you get undefined symbols, see below for a solution.
# (K) See lines to uncomment below for machines with 64 bit pointers.
# (L) For Silicon Graphics O2 workstations remove "-lnsl" from auto/config.mk
# (M) gcc version cygnus-2.0.1 does NOT work (symptom: "dl" deletes two
# characters instead of one).
# (N) SCO with decmouse.
# (O) LynxOS needs EXTRA_LIBS, see below.
# (P) For SuperUX 6.2 on NEC SX-4 see a few lines below to uncomment.
# (Q) For UNIXSVR 4.2MP on NEC UP4800 see below for lines to uncomment.
# (R) For Solaris 2.5 (or 2.5.1) with gcc > 2.5.6, uncomment line below.
# (S) For Irix 6.x with MipsPro compiler, use -OPT:Olimit. See line below.
# (T) See ../doc/os_beos.txt.
# (U) Must uncomment CONF_OPT_PYTHON option below to disable Python
# detection, since the configure script runs into an error when it
# detects Python (probably because of the bash shell).
# (V) See lines to uncomment below.
# (X) Need to use the .include "auto/config.mk" line below
# (Y) See line with c89 below
# (Z) See lines with cc or c89 below
# (a) See line with EXTRA_LIBS below.
# (b) When using gcc with the Solaris linker, make sure you don't use GNU
# strip, otherwise the binary may not run: "Cannot find ELF".
# (c) Add -lfloss to EXTRA_LIBS, see below.
# (x) When you get warnings for precompiled header files, run
# "sudo fixPrecomps". Also see CONF_OPT_DARWIN below.
# }}}
#DO NOT CHANGE the next line, we need it for configure to find the compiler
#instead of using the default from the "make" program.
#Use a line further down to change the value for CC.
CC=
# Change and use these defines if configure cannot find your Motif stuff.
# Unfortunately there is no "standard" location for Motif. {{{
# These defines can contain a single directory (recommended) or a list of
# directories (for when you are working with several systems). The LAST
# directory that exists is used.
# When changed, run "make reconfig" next!
#GUI_INC_LOC = -I/usr/include/Motif2.0 -I/usr/include/Motif1.2
#GUI_LIB_LOC = -L/usr/lib/Motif2.0 -L/usr/lib/Motif1.2
### Use these two lines for Infomagic Motif (3)
#GUI_INC_LOC = -I/usr/X11R6/include
#GUI_LIB_LOC = -L/usr/X11R6/lib
# }}}
######################## auto/config.mk ######################## {{{1
# At this position auto/config.mk is included. When starting from the
# distribution it is almost empty. After running auto/configure it contains
# settings that have been discovered for your system. Settings below this
# include override settings in auto/config.mk!
# Note: if auto/config.mk is lost somehow (e.g., because configure was
# interrupted), create an empty auto/config.mk file and do "make config".
# (X) How to include auto/config.mk depends on the version of "make" you have,
# if the current choice doesn't work, try the other one.
include auto/config.mk
#.include "auto/config.mk"
CClink = $(CC)
#}}}
# Include the configuration choices first, so we can override everything
# below. As shipped, this file contains a target that causes to run
# configure. Once configure was run, this file contains a list of
# make variables with predefined values instead. Thus any second invocation
# of make, will build Vim.
# CONFIGURE - configure arguments {{{1
# You can give a lot of options to configure.
# Change this to your desire and do 'make config' afterwards
# examples (can only use one!):
#CONF_ARGS = --exec-prefix=/usr
#CONF_ARGS = --with-vim-name=vim7 --with-ex-name=ex7 --with-view-name=view7
#CONF_ARGS = --with-global-runtime=/etc/vim
# Use this one if you distribute a modified version of Vim.
#CONF_ARGS = --with-modified-by="John Doe"
# GUI - For creating Vim with GUI (gvim) (B)
# Uncomment this line when you don't want to get the GUI version, although you
# have GTK, Motif and/or Athena. Also use --without-x if you don't want X11
# at all.
#CONF_OPT_GUI = --disable-gui
# Uncomment one of these lines if you have that GUI but don't want to use it.
# The automatic check will use another one that can be found.
# Gnome is disabled by default, it may cause trouble.
#CONF_OPT_GUI = --disable-gtk-check
#CONF_OPT_GUI = --disable-gtk2-check
#CONF_OPT_GUI = --enable-gnome-check
#CONF_OPT_GUI = --enable-gnome2-check
#CONF_OPT_GUI = --disable-motif-check
#CONF_OPT_GUI = --disable-athena-check
#CONF_OPT_GUI = --disable-nextaw-check
# Uncomment one of these lines to select a specific GUI to use.
# When using "yes" or nothing, configure will use the first one found: GTK+,
# Motif or Athena.
#
# GTK versions that are known not to work 100% are rejected.
# Use "--disable-gtktest" to accept them anyway.
#
# GNOME means GTK with Gnome support. If using GTK and --enable-gnome-check
# is used then GNOME will automatically be used if it is found. If you have
# GNOME, but do not want to use it (e.g., want a GTK-only version), then use
# --enable-gui=gtk or leave out --enable-gnome-check.
#
# If the selected GUI isn't found, the GUI is disabled automatically
#CONF_OPT_GUI = --enable-gui=gtk
#CONF_OPT_GUI = --enable-gui=gtk --disable-gtktest
#CONF_OPT_GUI = --enable-gui=gtk2
#CONF_OPT_GUI = --enable-gui=gtk2 --disable-gtktest
#CONF_OPT_GUI = --enable-gui=gnome
#CONF_OPT_GUI = --enable-gui=gnome2
#CONF_OPT_GUI = --enable-gui=gnome2 --disable-gtktest
#CONF_OPT_GUI = --enable-gui=motif
#CONF_OPT_GUI = --enable-gui=motif --with-motif-lib="-static -lXm -shared"
#CONF_OPT_GUI = --enable-gui=athena
#CONF_OPT_GUI = --enable-gui=nextaw
# DARWIN - detecting Mac OS X
# Uncomment this line when you want to compile a Unix version of Vim on
# Darwin. None of the Mac specific options or files will be used.
#CONF_OPT_DARWIN = --disable-darwin
# Select the architecture supported. Default is to build for the current
# platform. Use "both" for a universal binary. That probably doesn't work
# when including Perl, Python, etc.
#CONF_OPT_DARWIN = --with-mac-arch=i386
#CONF_OPT_DARWIN = --with-mac-arch=ppc
#CONF_OPT_DARWIN = --with-mac-arch=both
# PERL
# Uncomment this when you want to include the Perl interface.
# The Perl option sometimes causes problems, because it adds extra flags
# to the command line. If you see strange flags during compilation, check in
# auto/config.mk where they come from. If it's PERL_CFLAGS, try commenting
# the next line.
# When you get an error for a missing "perl.exp" file, try creating an emtpy
# one: "touch perl.exp".
# This requires at least "small" features, "tiny" doesn't work.
#CONF_OPT_PERL = --enable-perlinterp
# PYTHON
# Uncomment this when you want to include the Python interface.
# NOTE: This may cause threading to be enabled, which has side effects (such
# as using different libraries and debugging becomes more difficult).
# NOTE: Using this together with Perl may cause a crash in initialization.
#CONF_OPT_PYTHON = --enable-pythoninterp
# TCL
# Uncomment this when you want to include the Tcl interface.
#CONF_OPT_TCL = --enable-tclinterp
#CONF_OPT_TCL = --enable-tclinterp --with-tclsh=tclsh8.4
# RUBY
# Uncomment this when you want to include the Ruby interface.
#CONF_OPT_RUBY = --enable-rubyinterp
# MZSCHEME
# Uncomment this when you want to include the MzScheme interface.
#CONF_OPT_MZSCHEME = --enable-mzschemeinterp
# PLT/mrscheme/drscheme Home dir; the PLTHOME environment variable also works
#CONF_OPT_PLTHOME = --with-plthome=/usr/local/plt
#CONF_OPT_PLTHOME = --with-plthome=/usr/local/drscheme
#CONF_OPT_PLTHOME = --with-plthome=/home/me/mz
# CSCOPE
# Uncomment this when you want to include the Cscope interface.
#CONF_OPT_CSCOPE = --enable-cscope
# WORKSHOP - Sun Visual Workshop interface. Only works with Motif!
#CONF_OPT_WORKSHOP = --enable-workshop
# NETBEANS - NetBeans interface. Only works with Motif, GTK, and gnome.
# Motif version must have XPM libraries (see |workshop-xpm|).
# Uncomment this when you do not want the netbeans interface.
#CONF_OPT_NETBEANS = --disable-netbeans
# SNIFF - Include support for SNiFF+.
#CONF_OPT_SNIFF = --enable-sniff
# MULTIBYTE - To edit multi-byte characters.
# Uncomment this when you want to edit a multibyte language.
# It's automatically enabled with big features or IME support.
# Note: Compile on a machine where setlocale() actually works, otherwise the
# configure tests may fail.
#CONF_OPT_MULTIBYTE = --enable-multibyte
# NLS - National Language Support
# Uncomment this when you do not want to support translated messages, even
# though configure can find support for it.
#CONF_OPT_NLS = --disable-nls
# XIM - X Input Method. Special character input support for X11 (Chinese,
# Japanese, special symbols, etc). Also needed for dead-key support.
# When omitted it's automatically enabled for the X-windows GUI.
# HANGUL - Input Hangul (Korean) language using internal routines.
# Uncomment one of these when you want to input a multibyte language.
#CONF_OPT_INPUT = --enable-xim
#CONF_OPT_INPUT = --disable-xim
#CONF_OPT_INPUT = --enable-hangulinput
# FONTSET - X fontset support for output of languages with many characters.
# Uncomment this when you want to output a multibyte language.
#CONF_OPT_OUTPUT = --enable-fontset
# ACL - Uncomment this when you do not want to include ACL support, even
# though your system does support it. E.g., when it's buggy.
#CONF_OPT_ACL = --disable-acl
# gpm - For mouse support on Linux console via gpm
# Uncomment this when you do not want to include gpm support, even
# though you have gpm libraries and includes
#CONF_OPT_GPM = --disable-gpm
# FEATURES - For creating Vim with more or less features
# Uncomment one of these lines when you want to include few to many features.
# The default is "normal".
#CONF_OPT_FEAT = --with-features=tiny
#CONF_OPT_FEAT = --with-features=small
#CONF_OPT_FEAT = --with-features=normal
#CONF_OPT_FEAT = --with-features=big
#CONF_OPT_FEAT = --with-features=huge
# COMPILED BY - For including a specific e-mail address for ":version".
#CONF_OPT_COMPBY = "--with-compiledby=John Doe <JohnDoe@yahoo.com>"
# X WINDOWS DISABLE - For creating a plain Vim without any X11 related fancies
# (otherwise Vim configure will try to include xterm titlebar access)
# Also disable the GUI above, otherwise it will be included anyway.
# When both GUI and X11 have been disabled this may save about 15% of the
# code and make Vim startup quicker.
#CONF_OPT_X = --without-x
# X WINDOWS DIRECTORY - specify X directories
# If configure can't find you X stuff, or if you have multiple X11 derivatives
# installed, you may wish to specify which one to use.
# Select nothing to let configure choose.
# This here selects openwin (as found on sun).
#XROOT = /usr/openwin
#CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib
# X11 Session Management Protocol support
# Vim will try to use XSMP to catch the user logging out if there are unsaved
# files. Uncomment this line to disable that (it prevents vim trying to open
# communications with the session manager).
#CONF_OPT_XSMP = --disable-xsmp
# You may wish to include xsmp but use exclude xsmp-interact if the logout
# XSMP functionality does not work well with your session-manager (at time of
# writing, this would be early GNOME-1 gnome-session: it 'freezes' other
# applications after Vim has cancelled a logout (until Vim quits). This
# *might* be the Vim code, but is more likely a bug in early GNOME-1.
# This disables the dialog that asks you if you want to save files or not.
#CONF_OPT_XSMP = --disable-xsmp-interact
# COMPILER - Name of the compiler {{{1
# The default from configure will mostly be fine, no need to change this, just
# an example. If a compiler is defined here, configure will use it rather than
# probing for one. It is dangerous to change this after configure was run.
# Make will use your choice then -- but beware: Many things may change with
# another compiler. It is wise to run 'make reconfig' to start all over
# again.
#CC = cc
#CC = gcc
# COMPILER FLAGS - change as you please. Either before running {{{1
# configure or afterwards. For examples see below.
# When using -g with some older versions of Linux you might get a
# statically linked executable.
# When not defined, configure will try to use -O2 -g for gcc and -O for cc.
#CFLAGS = -g
#CFLAGS = -O
# Optimization limits - depends on the compiler. Automatic check in configure
# doesn't work very well, because many compilers only give a warning for
# unrecognized arguments.
#CFLAGS = -O -OPT:Olimit=2600
#CFLAGS = -O -Olimit 2000
#CFLAGS = -O -FOlimit,2000
# Often used for GCC: mixed optimizing, lot of optimizing, debugging
#CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes
#CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wmissing-prototypes
#CFLAGS = -g -Wall -Wmissing-prototypes
#CFLAGS = -O6 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes
#CFLAGS = -g -DDEBUG -Wall -Wshadow -Wmissing-prototypes
#CFLAGS = -g -O2 '-DSTARTUPTIME="vimstartup"' -fno-strength-reduce -Wall -Wmissing-prototypes
# EFENCE - Electric-Fence malloc debugging: catches memory accesses beyond
# allocated memory (and makes every malloc()/free() very slow).
# Electric Fence is free (search ftp sites).
# You may want to set the EF_PROTECT_BELOW environment variable to check the
# other side of allocated memory.
# On FreeBSD you might need to enlarge the number of mmaps allowed. Do this
# as root: sysctl -w vm.max_proc_mmap=30000
#EXTRA_LIBS = /usr/local/lib/libefence.a
# PURIFY - remove the # to use the "purify" program (hoi Nia++!)
#PURIFY = purify
# }}}
# LINT - for running lint
LINT_OPTIONS = -beprxzF
# PROFILING - Uncomment the next two lines to do profiling with gcc and gprof.
# Might not work with GUI or Perl.
# For unknown reasons adding "-lc" fixes a linking problem with GCC. That's
# probably a bug in the "-pg" implementation.
# Need to recompile everything after changing this: "make clean" "make".
#PROFILE_CFLAGS = -pg -g -DWE_ARE_PROFILING
#PROFILE_LIBS = -pg
#PROFILE_LIBS = -pg -lc
# MEMORY LEAK DETECTION
# Requires installing the ccmalloc library.
# Configuration is in the .ccmalloc or ~/.ccmalloc file.
# Doesn't work very well, since memory linked to from global variables
# (in libraries) is also marked as leaked memory.
#PROFILE_CFLAGS = -DEXITFREE
#PROFILE_LIBS = -lccmalloc
#####################################################
### Specific systems, check if yours is listed! ### {{{
#####################################################
### Uncomment things here only if the values chosen by configure are wrong.
### It's better to adjust configure.in and "make autoconf", if you can!
### Then send the required changes to configure.in to the bugs list.
### (1) BSD/OS 2.0.1, 2.1 or 3.0 using shared libraries
###
#CC = shlicc2
#CFLAGS = -O2 -g -m486 -Wall -Wshadow -Wmissing-prototypes -fno-builtin
### (2) HP-UX with a non-ANSI cc, use the c89 ANSI compiler
### The first probably works on all systems
### The second should work a bit better on newer systems
### The third should work a bit better on HPUX 11.11
### Information provided by: Richard Allen <ra@rhi.hi.is>
#CC = c89 -D_HPUX_SOURCE
#CC = c89 -O +Onolimit +ESlit -D_HPUX_SOURCE
#CC = c89 -O +Onolimit +ESlit +e -D_HPUX_SOURCE
### (2) For HP-UX: Enable the use of a different set of digraphs. Use this
### when the default (ISO) digraphs look completely wrong.
### After changing this do "touch digraph.c; make".
#EXTRA_DEFS = -DHPUX_DIGRAPHS
### (2) For HP-UX: 9.04 cpp default macro definition table of 128000 bytes
### is too small to compile many routines. It produces too much defining
### and no space errors.
### Uncomment the following to specify a larger macro definition table.
#CFLAGS = -Wp,-H256000
### (2) For HP-UX 10.20 using the HP cc, with X11R6 and Motif 1.2, with
### libraries in /usr/lib instead of /lib (avoiding transition links).
### Information provided by: David Green
#XROOT = /usr
#CONF_OPT_X = --x-include=$(XROOT)/include/X11R6 --x-libraries=$(XROOT)/lib/X11R6
#GUI_INC_LOC = -I/usr/include/Motif1.2
#GUI_LIB_LOC = -L/usr/lib/Motif1.2_R6
### (5) AIX 4.1.4 with cc
#CFLAGS = -O -qmaxmem=8192
### AIX with c89 (Walter Briscoe)
#CC = c89
#CPPFLAGS = -D_ALL_SOURCE
### AIX 4.3.3.12 with xic 3.6.6 (David R. Favor)
# needed to avoid a problem where strings.h gets included
#CFLAGS = -qsrcmsg -O2 -qmaxmem=8192 -D__STR31__
### (W) Solaris with multi-threaded libraries (-lthread):
### If suspending doesn't work properly, try using this line:
#EXTRA_DEFS = -D_REENTRANT
### (7) Solaris 2.4/2.5 with Centerline compiler
#CC = clcc
#X_LIBS_DIR = -L/usr/openwin/lib -R/usr/openwin/lib
#CFLAGS = -O
### (9) Solaris 2.x with cc (SunPro), using Athena.
### Only required for compiling gui_at_sb.c.
### Symptom: "identifier redeclared: vim_XawScrollbarSetThumb"
### Use one of the lines (either Full ANSI or no ANSI at all)
#CFLAGS = $(CFLAGS) -Xc
#CFLAGS = $(CFLAGS) -Xs
### Solaris 2.3 with X11 and specific cc
#CC=/opt/SUNWspro/bin/cc -O -Xa -v -R/usr/openwin/lib
### Solaris with /usr/ucb/cc (it is rejected by autoconf as "cc")
#CC = /usr/ucb/cc
#EXTRA_LIBS = -R/usr/ucblib
### Solaris with Forte Developer and FEAT_SUN_WORKSHOP
# The Xpm library is available from http://koala.ilog.fr/ftp/pub/xpm.
#CC = cc
#XPM_DIR = /usr/local/xpm/xpm-3.4k-solaris
#XPM_LIB = -L$(XPM_DIR)/lib -R$(XPM_DIR)/lib -lXpm
#XPM_IPATH = -I$(XPM_DIR)/include
#EXTRA_LIBS = $(XPM_LIB)
#EXTRA_IPATHS = $(XPM_IPATH)
#EXTRA_DEFS = -xCC -DHAVE_X11_XPM_H
### Solaris with workshop compilers: Vim is unstable when compiled with
# "-fast". Use this instead. (Shea Martin)
#CFLAGS = -x02 -xtarget=ultra
### (R) for Solaris 2.5 (or 2.5.1) with gcc > 2.5.6 you might need this:
#LDFLAGS = -lw -ldl -lXmu
#GUI_LIB_LOC = -L/usr/local/lib
### (8) Unisys 6035 (Glauber Ribeiro)
#EXTRA_LIBS = -lnsl -lsocket -lgen
### When builtin functions cause problems with gcc (for Sun 4.1.x)
#CFLAGS = -O2 -Wall -traditional -Wno-implicit
### Apollo DOMAIN (with SYSTYPE = bsd4.3) (TESTED for version 3.0)
#EXTRA_DEFS = -DDOMAIN
#CFLAGS= -O -A systype,bsd4.3
### Coherent 4.2.10 on Intel 386 platform
#EXTRA_DEFS = -Dvoid=int
#EXTRA_LIBS = -lterm -lsocket
### SCO 3.2, with different library name for terminfo
#EXTRA_LIBS = -ltinfo
### UTS2 for Amdahl UTS 2.1.x
#EXTRA_DEFS = -DUTS2
#EXTRA_LIBS = -lsocket
### UTS4 for Amdahl UTS 4.x
#EXTRA_DEFS = -DUTS4 -Xa
### USL for Unix Systems Laboratories (SYSV 4.2)
#EXTRA_DEFS = -DUSL
### RISCos on MIPS without X11
#EXTRA_DEFS = -DMIPS
### RISCos on MIPS with X11
#EXTRA_LIBS = -lsun
### (6) A/UX 3.1.1 with gcc (Jim Jagielski)
#CC= gcc -D_POSIX_SOURCE
#CFLAGS= -O2
#EXTRA_LIBS = -lposix -lbsd -ltermcap -lX11
### (A) Some versions of SCO Open Server 5 (Jan Christiaan van Winkel)
### Also use the CONF_TERM_LIB below!
#EXTRA_LIBS = -lgen
### (D) QNX (by G.F. Desrochers)
#CFLAGS = -g -O -mf -4
### (F) QNX (by John Oleynick)
# 1. If you don't have an X server: Comment out CONF_OPT_GUI and uncomment
# CONF_OPT_X = --without-x.
# 2. make config
# 3. edit auto/config.mk and remove -ldir and -ltermcap from LIBS. It doesn't
# have -ldir (does config find it somewhere?) and -ltermcap has at
# least one problem so I use termlib.o instead. The problem with
# termcap is that it segfaults if you call it with the name of
# a non-existent terminal type.
# 4. edit auto/config.h and add #define USE_TMPNAM
# 5. add termlib.o to OBJ
# 6. make
### (H) for Data general DG/UX 5.4.2 and 5.4R3.10 (Jonas J. Schlein)
#EXTRA_LIBS = -lgen
### (I) SINIX-N 5.42 or 5.43 RM400 R4000 (also SINIX-Y and SINIX-Z)
#EXTRA_LIBS = -lgen -lnsl
### For SINIX-Y this is needed for the right prototype of gettimeofday()
#EXTRA_DEFS = -D_XPG_IV
### (I) Reliant-Unix (aka SINIX) 5.44 with standard cc
# Use both "-F O3" lines for optimization or the "-g" line for debugging
#EXTRA_LIBS = -lgen -lsocket -lnsl -lSM -lICE
#CFLAGS = -F O3 -DSINIXN
#LDFLAGS = -F O3
#CFLAGS = -g -DSINIXN
### (P) SCO 3.2.42, with different termcap names for some useful keys DJB
#EXTRA_DEFS = -DSCOKEYS -DNETTERM_MOUSE -DDEC_MOUSE -DXTERM_MOUSE -DHAVE_GETTIMEOFDAY
#EXTRA_LIBS = -lsocket -ltermcap -lmalloc -lc_s
### (P) SuperUX 6.2 on NEC SX-4 (Lennart Schultz)
#GUI_INC_LOC = -I/usr/include
#GUI_LIB_LOC = -L/usr/lib
#EXTRA_LIBS = -lgen
### (Q) UNIXSVR 4.2MP on NEC UP4800 (Lennart Schultz)
#GUI_INC_LOC = -I/usr/necccs/include
#GUI_LIB_LOC = -L/usr/necccs/lib/X11R6
#XROOT = /usr/necccs
#CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib/X11R6
#EXTRA_LIBS = -lsocket -lgen
### Irix 4.0 & 5.2 (Silicon Graphics Machines, __sgi will be defined)
# Not needed for Irix 5.3, Ives Aerts reported
#EXTRA_LIBS = -lmalloc -lc_s
# Irix 4.0, when regexp and regcmp cannot be found when linking:
#EXTRA_LIBS = -lmalloc -lc_s -lPW
### (S) Irix 6.x (MipsPro compiler): Uses different Olimit flag:
# Note: This newer option style is used with the MipsPro compilers ONLY if
# you are compiling an "n32" or "64" ABI binary (use either a -n32
# flag or a -64 flag for CFLAGS). If you explicitly use a -o32 flag,
# then the CFLAGS option format will be the typical style (i.e.
# -Olimit 3000).
#CFLAGS = -OPT:Olimit=3000 -O
### (S) Irix 6.5 with MipsPro C compiler. Try this as a test to see new
# compiler features! Beware, the optimization is EXTREMELY thorough
# and takes quite a long time.
# Note: See the note above. Here, the -mips3 option automatically
# enables either the "n32" or "64" ABI, depending on what machine you
# are compiling on (n32 is explicitly enabled here, just to make sure).
#CFLAGS = -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush
#LDFLAGS= -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush
### (K) for SGI Irix machines with 64 bit pointers ("uname -s" says IRIX64)
### Suggested by Jon Wright <jon@gate.sinica.edu.tw>.
### Tested on R8000 IRIX6.1 Power Indigo2.
### Check /etc/compiler.defaults for your compiler settings.
# either (for 64 bit pointers) uncomment the following line
#GUI_LIB_LOC = -L/usr/lib64
# then
# 1) make config
# 2) edit auto/config.mk and delete the -lelf entry in the LIBS line
# 3) make
#
# or (for 32bit pointers) uncomment the following line
#EXTRA_DEFS = -n32
#GUI_LIB_LOC = -L/usr/lib32
# then
# 1) make config
# 2) edit auto/config.mk, add -n32 to LDFLAGS
# 3) make
###
### (C) On SCO Unix v3.2.5 (and probably other versions) the termcap library,
### which is found by configure, doesn't work correctly. Symptom is the
### error message "Termcap entry too long". Uncomment the next line.
### On AIX 4.2.1 (and other versions probably), libtermcap is reported
### not to display properly.
### after changing this, you need to do "make reconfig".
#CONF_TERM_LIB = --with-tlib=curses
### (E) If you want to use termlib library instead of the automatically found
### one. After changing this, you need to do "make reconfig".
#CONF_TERM_LIB = --with-tlib=termlib
### (a) ESIX V4.2 (Reinhard Wobst)
#EXTRA_LIBS = -lnsl -lsocket -lgen -lXIM -lXmu -lXext
### (c) Tandem/NSK (Matthew Woehlke)
#EXTRA_LIBS = -lfloss
### If you want to use ncurses library instead of the automatically found one
### after changing this, you need to do "make reconfig".
#CONF_TERM_LIB = --with-tlib=ncurses
### For GCC on MSDOS, the ".exe" suffix will be added.
#EXEEXT = .exe
#LNKEXT = .exe
### (O) For LynxOS 2.5.0, tested on PC.
#EXTRA_LIBS = -lXext -lSM -lICE -lbsd
### For LynxOS 3.0.1, tested on PPC
#EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu -liberty -lX11
### For LynxOS 3.1.0, tested on PC
#EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu
### (V) For CX/UX 6.2 (on Harris/Concurrent NightHawk 4800, 5800). Remove
### -Qtarget if only in a 5800 environment. (Kipp E. Howard)
#CFLAGS = -O -Qtarget=m88110compat
#EXTRA_LIBS = -lgen
##################### end of system specific lines ################### }}}
### Names of the programs and targets {{{1
VIMTARGET = $(VIMNAME)$(EXEEXT)
EXTARGET = $(EXNAME)$(LNKEXT)
VIEWTARGET = $(VIEWNAME)$(LNKEXT)
GVIMNAME = g$(VIMNAME)
GVIMTARGET = $(GVIMNAME)$(LNKEXT)
GVIEWNAME = g$(VIEWNAME)
GVIEWTARGET = $(GVIEWNAME)$(LNKEXT)
RVIMNAME = r$(VIMNAME)
RVIMTARGET = $(RVIMNAME)$(LNKEXT)
RVIEWNAME = r$(VIEWNAME)
RVIEWTARGET = $(RVIEWNAME)$(LNKEXT)
RGVIMNAME = r$(GVIMNAME)
RGVIMTARGET = $(RGVIMNAME)$(LNKEXT)
RGVIEWNAME = r$(GVIEWNAME)
RGVIEWTARGET = $(RGVIEWNAME)$(LNKEXT)
VIMDIFFNAME = $(VIMNAME)diff
GVIMDIFFNAME = g$(VIMDIFFNAME)
VIMDIFFTARGET = $(VIMDIFFNAME)$(LNKEXT)
GVIMDIFFTARGET = $(GVIMDIFFNAME)$(LNKEXT)
EVIMNAME = e$(VIMNAME)
EVIMTARGET = $(EVIMNAME)$(LNKEXT)
EVIEWNAME = e$(VIEWNAME)
EVIEWTARGET = $(EVIEWNAME)$(LNKEXT)
### Names of the tools that are also made {{{1
TOOLS = xxd/xxd$(EXEEXT)
### Installation directories. The defaults come from configure. {{{1
#
### prefix the top directory for the data (default "/usr/local")
#
# Uncomment the next line to install Vim in your home directory.
#prefix = $(HOME)
### exec_prefix is the top directory for the executable (default $(prefix))
#
# Uncomment the next line to install the Vim executable in "/usr/machine/bin"
#exec_prefix = /usr/machine
### BINDIR dir for the executable (default "$(exec_prefix)/bin")
### MANDIR dir for the manual pages (default "$(prefix)/man")
### DATADIR dir for the other files (default "$(prefix)/lib" or
# "$(prefix)/share")
# They may be different when using different architectures for the
# executable and a common directory for the other files.
#
# Uncomment the next line to install Vim in "/usr/bin"
#BINDIR = /usr/bin
# Uncomment the next line to install Vim manuals in "/usr/share/man/man1"
#MANDIR = /usr/share/man
# Uncomment the next line to install Vim help files in "/usr/share/vim"
#DATADIR = /usr/share
### DESTDIR root of the installation tree. This is prepended to the other
# directories. This directory must exist.
#DESTDIR = ~/pkg/vim
### Directory of the man pages
MAN1DIR = /man1
### Vim version (adjusted by a script)
VIMMAJOR = 7
VIMMINOR = 1
### Location of Vim files (should not need to be changed, and {{{1
### some things might not work when they are changed!)
VIMDIR = /vim
VIMRTDIR = /vim$(VIMMAJOR)$(VIMMINOR)
HELPSUBDIR = /doc
COLSUBDIR = /colors
SYNSUBDIR = /syntax
INDSUBDIR = /indent
AUTOSUBDIR = /autoload
PLUGSUBDIR = /plugin
FTPLUGSUBDIR = /ftplugin
LANGSUBDIR = /lang
COMPSUBDIR = /compiler
KMAPSUBDIR = /keymap
MACROSUBDIR = /macros
TOOLSSUBDIR = /tools
TUTORSUBDIR = /tutor
SPELLSUBDIR = /spell
PRINTSUBDIR = /print
PODIR = po
### VIMLOC common root of the Vim files (all versions)
### VIMRTLOC common root of the runtime Vim files (this version)
### VIMRCLOC compiled-in location for global [g]vimrc files (all versions)
### VIMRUNTIMEDIR compiled-in location for runtime files (optional)
### HELPSUBLOC location for help files
### COLSUBLOC location for colorscheme files
### SYNSUBLOC location for syntax files
### INDSUBLOC location for indent files
### AUTOSUBLOC location for standard autoload files
### PLUGSUBLOC location for standard plugin files
### FTPLUGSUBLOC location for ftplugin files
### LANGSUBLOC location for language files
### COMPSUBLOC location for compiler files
### KMAPSUBLOC location for keymap files
### MACROSUBLOC location for macro files
### TOOLSSUBLOC location for tools files
### TUTORSUBLOC location for tutor files
### SPELLSUBLOC location for spell files
### PRINTSUBLOC location for PostScript files (prolog, latin1, ..)
### SCRIPTLOC location for script files (menu.vim, bugreport.vim, ..)
### You can override these if you want to install them somewhere else.
### Edit feature.h for compile-time settings.
VIMLOC = $(DATADIR)$(VIMDIR)
VIMRTLOC = $(DATADIR)$(VIMDIR)$(VIMRTDIR)
VIMRCLOC = $(VIMLOC)
HELPSUBLOC = $(VIMRTLOC)$(HELPSUBDIR)
COLSUBLOC = $(VIMRTLOC)$(COLSUBDIR)
SYNSUBLOC = $(VIMRTLOC)$(SYNSUBDIR)
INDSUBLOC = $(VIMRTLOC)$(INDSUBDIR)
AUTOSUBLOC = $(VIMRTLOC)$(AUTOSUBDIR)
PLUGSUBLOC = $(VIMRTLOC)$(PLUGSUBDIR)
FTPLUGSUBLOC = $(VIMRTLOC)$(FTPLUGSUBDIR)
LANGSUBLOC = $(VIMRTLOC)$(LANGSUBDIR)
COMPSUBLOC = $(VIMRTLOC)$(COMPSUBDIR)
KMAPSUBLOC = $(VIMRTLOC)$(KMAPSUBDIR)
MACROSUBLOC = $(VIMRTLOC)$(MACROSUBDIR)
TOOLSSUBLOC = $(VIMRTLOC)$(TOOLSSUBDIR)
TUTORSUBLOC = $(VIMRTLOC)$(TUTORSUBDIR)
SPELLSUBLOC = $(VIMRTLOC)$(SPELLSUBDIR)
PRINTSUBLOC = $(VIMRTLOC)$(PRINTSUBDIR)
SCRIPTLOC = $(VIMRTLOC)
### Only set VIMRUNTIMEDIR when VIMRTLOC is set to a different location and
### the runtime directory is not below it.
#VIMRUNTIMEDIR = $(VIMRTLOC)
### Name of the evim file target.
EVIM_FILE = $(DESTDIR)$(SCRIPTLOC)/evim.vim
MSWIN_FILE = $(DESTDIR)$(SCRIPTLOC)/mswin.vim
### Name of the menu file target.
SYS_MENU_FILE = $(DESTDIR)$(SCRIPTLOC)/menu.vim
SYS_SYNMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/synmenu.vim
SYS_DELMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/delmenu.vim
### Name of the bugreport file target.
SYS_BUGR_FILE = $(DESTDIR)$(SCRIPTLOC)/bugreport.vim
### Name of the file type detection file target.
SYS_FILETYPE_FILE = $(DESTDIR)$(SCRIPTLOC)/filetype.vim
### Name of the file type detection file target.
SYS_FTOFF_FILE = $(DESTDIR)$(SCRIPTLOC)/ftoff.vim
### Name of the file type detection script file target.
SYS_SCRIPTS_FILE = $(DESTDIR)$(SCRIPTLOC)/scripts.vim
### Name of the ftplugin-on file target.
SYS_FTPLUGIN_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugin.vim
### Name of the ftplugin-off file target.
SYS_FTPLUGOF_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugof.vim
### Name of the indent-on file target.
SYS_INDENT_FILE = $(DESTDIR)$(SCRIPTLOC)/indent.vim
### Name of the indent-off file target.
SYS_INDOFF_FILE = $(DESTDIR)$(SCRIPTLOC)/indoff.vim
### Name of the option window script file target.
SYS_OPTWIN_FILE = $(DESTDIR)$(SCRIPTLOC)/optwin.vim
# Program to install the program in the target directory. Could also be "mv".
INSTALL_PROG = cp
# Program to install the data in the target directory. Cannot be "mv"!
INSTALL_DATA = cp
INSTALL_DATA_R = cp -r
### Program to run on installed binary
#STRIP = strip
### Permissions for binaries {{{1
BINMOD = 755
### Permissions for man page
MANMOD = 644
### Permissions for help files
HELPMOD = 644
### Permissions for Perl and shell scripts
SCRIPTMOD = 755
### Permission for Vim script files (menu.vim, bugreport.vim, ..)
VIMSCRIPTMOD = 644
### Permissions for all directories that are created
DIRMOD = 755
### Permissions for all other files that are created
FILEMOD = 644
# Where to copy the man and help files from
HELPSOURCE = ../runtime/doc
# Where to copy the script files from (menu, bugreport)
SCRIPTSOURCE = ../runtime
# Where to copy the colorscheme files from
COLSOURCE = ../runtime/colors
# Where to copy the syntax files from
SYNSOURCE = ../runtime/syntax
# Where to copy the indent files from
INDSOURCE = ../runtime/indent
# Where to copy the standard plugin files from
AUTOSOURCE = ../runtime/autoload
# Where to copy the standard plugin files from
PLUGSOURCE = ../runtime/plugin
# Where to copy the ftplugin files from
FTPLUGSOURCE = ../runtime/ftplugin
# Where to copy the macro files from
MACROSOURCE = ../runtime/macros
# Where to copy the tools files from
TOOLSSOURCE = ../runtime/tools
# Where to copy the tutor files from
TUTORSOURCE = ../runtime/tutor
# Where to copy the spell files from
SPELLSOURCE = ../runtime/spell
# Where to look for language specific files
LANGSOURCE = ../runtime/lang
# Where to look for compiler files
COMPSOURCE = ../runtime/compiler
# Where to look for keymap files
KMAPSOURCE = ../runtime/keymap
# Where to look for print resource files
PRINTSOURCE = ../runtime/print
# If you are using Linux, you might want to use this to make vim the
# default vi editor, it will create a link from vi to Vim when doing
# "make install". An existing file will be overwritten!
# When not using it, some make programs can't handle an undefined $(LINKIT).
#LINKIT = -ln -f -s $(BINDIR)/$(VIMTARGET) /usr/bin/vi
LINKIT = @echo >/dev/null
###
### GRAPHICAL USER INTERFACE (GUI). {{{1
### 'configure --enable-gui' can enable one of these for you if you did set
### a corresponding CONF_OPT_GUI above and have X11.
### Override configures choice by uncommenting all the following lines.
### As they are, the GUI is disabled. Replace "NONE" with "ATHENA" or "MOTIF"
### for enabling the Athena or Motif GUI.
#GUI_SRC = $(NONE_SRC)
#GUI_OBJ = $(NONE_OBJ)
#GUI_DEFS = $(NONE_DEFS)
#GUI_IPATH = $(NONE_IPATH)
#GUI_LIBS_DIR = $(NONE_LIBS_DIR)
#GUI_LIBS1 = $(NONE_LIBS1)
#GUI_LIBS2 = $(NONE_LIBS2)
#GUI_INSTALL = $(NONE_INSTALL)
#GUI_TARGETS = $(NONE_TARGETS)
#GUI_MAN_TARGETS= $(NONE_MAN_TARGETS)
#GUI_TESTTARGET = $(NONE_TESTTARGET)
#GUI_BUNDLE = $(NONE_BUNDLE)
# Without a GUI install the normal way.
NONE_INSTALL = install_normal
### GTK GUI
GTK_SRC = gui.c gui_gtk.c gui_gtk_x11.c pty.c gui_gtk_f.c \
gui_beval.c
GTK_OBJ = objects/gui.o objects/gui_gtk.o objects/gui_gtk_x11.o \
objects/pty.o objects/gui_gtk_f.o \
objects/gui_beval.o
GTK_DEFS = -DFEAT_GUI_GTK $(NARROW_PROTO)
GTK_IPATH = $(GUI_INC_LOC)
GTK_LIBS_DIR = $(GUI_LIB_LOC)
GTK_LIBS1 =
GTK_LIBS2 = $(GTK_LIBNAME)
GTK_INSTALL = install_normal
GTK_TARGETS = installglinks
GTK_MAN_TARGETS = yes
GTK_TESTTARGET = gui
GTK_BUNDLE =
### Motif GUI
MOTIF_SRC = gui.c gui_motif.c gui_x11.c pty.c gui_beval.c \
gui_xmdlg.c gui_xmebw.c
MOTIF_OBJ = objects/gui.o objects/gui_motif.o objects/gui_x11.o \
objects/pty.o objects/gui_beval.o \
objects/gui_xmdlg.o objects/gui_xmebw.o
MOTIF_DEFS = -DFEAT_GUI_MOTIF $(NARROW_PROTO)
MOTIF_IPATH = $(GUI_INC_LOC)
MOTIF_LIBS_DIR = $(GUI_LIB_LOC)
MOTIF_LIBS1 =
MOTIF_LIBS2 = $(MOTIF_LIBNAME) -lXt
MOTIF_INSTALL = install_normal
MOTIF_TARGETS = installglinks
MOTIF_MAN_TARGETS = yes
MOTIF_TESTTARGET = gui
MOTIF_BUNDLE =
### Athena GUI
### Use Xaw3d to make the menus look a little bit nicer
#XAW_LIB = -lXaw3d
XAW_LIB = -lXaw
### When using Xaw3d, uncomment/comment the following lines to also get the
### scrollbars from Xaw3d.
#ATHENA_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c gui_at_fs.c
#ATHENA_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \
# objects/pty.o objects/gui_beval.o objects/gui_at_fs.o
#ATHENA_DEFS = -DFEAT_GUI_ATHENA $(NARROW_PROTO) \
# -Dvim_scrollbarWidgetClass=scrollbarWidgetClass \
# -Dvim_XawScrollbarSetThumb=XawScrollbarSetThumb
ATHENA_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c \
gui_at_sb.c gui_at_fs.c
ATHENA_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \
objects/pty.o objects/gui_beval.o \
objects/gui_at_sb.o objects/gui_at_fs.o
ATHENA_DEFS = -DFEAT_GUI_ATHENA $(NARROW_PROTO)
ATHENA_IPATH = $(GUI_INC_LOC)
ATHENA_LIBS_DIR = $(GUI_LIB_LOC)
ATHENA_LIBS1 = $(XAW_LIB)
ATHENA_LIBS2 = -lXt
ATHENA_INSTALL = install_normal
ATHENA_TARGETS = installglinks
ATHENA_MAN_TARGETS = yes
ATHENA_TESTTARGET = gui
ATHENA_BUNDLE =
### neXtaw GUI
NEXTAW_LIB = -lneXtaw
NEXTAW_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c gui_at_fs.c
NEXTAW_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \
objects/pty.o objects/gui_beval.o objects/gui_at_fs.o
NEXTAW_DEFS = -DFEAT_GUI_ATHENA -DFEAT_GUI_NEXTAW $(NARROW_PROTO)
NEXTAW_IPATH = $(GUI_INC_LOC)
NEXTAW_LIBS_DIR = $(GUI_LIB_LOC)
NEXTAW_LIBS1 = $(NEXTAW_LIB)
NEXTAW_LIBS2 = -lXt
NEXTAW_INSTALL = install_normal
NEXTAW_TARGETS = installglinks
NEXTAW_MAN_TARGETS = yes
NEXTAW_TESTTARGET = gui
NEXTAW_BUNDLE =
### (J) Sun OpenWindows 3.2 (SunOS 4.1.x) or earlier that produce these ld
# errors: ld: Undefined symbol
# _get_wmShellWidgetClass
# _get_applicationShellWidgetClass
# then you need to get patches 100512-02 and 100573-03 from Sun. In the
# meantime, uncomment the following GUI_X_LIBS definition as a workaround:
#GUI_X_LIBS = -Bstatic -lXmu -Bdynamic -lXext
# If you also get cos, sin etc. as undefined symbols, try uncommenting this
# too:
#EXTRA_LIBS = /usr/openwin/lib/libXmu.sa -lm
# PHOTON GUI
PHOTONGUI_SRC = gui.c gui_photon.c pty.c
PHOTONGUI_OBJ = objects/gui.o objects/gui_photon.o objects/pty.o
PHOTONGUI_DEFS = -DFEAT_GUI_PHOTON
PHOTONGUI_IPATH =
PHOTONGUI_LIBS_DIR =
PHOTONGUI_LIBS1 = -lph -lphexlib
PHOTONGUI_LIBS2 =
PHOTONGUI_INSTALL = install_normal
PHOTONGUI_TARGETS = installglinks
PHOTONGUI_MAN_TARGETS = yes
PHOTONGUI_TESTTARGET = gui
PHOTONGUI_BUNDLE =
# CARBON GUI
CARBONGUI_SRC = gui.c gui_mac.c
CARBONGUI_OBJ = objects/gui.o objects/gui_mac.o objects/pty.o
CARBONGUI_DEFS = -DFEAT_GUI_MAC -fno-common -fpascal-strings \
-Wall -Wno-unknown-pragmas \
-mdynamic-no-pic -pipe
CARBONGUI_IPATH = -I. -Iproto
CARBONGUI_LIBS_DIR =
CARBONGUI_LIBS1 = -framework Carbon
CARBONGUI_LIBS2 =
CARBONGUI_INSTALL = install_macosx
CARBONGUI_TARGETS =
CARBONGUI_MAN_TARGETS =
CARBONGUI_TESTTARGET = gui
CARBONGUI_BUNDLE = gui_bundle
APPDIR = $(VIMNAME).app
CARBONGUI_TESTARG = VIMPROG=../$(APPDIR)/Contents/MacOS/$(VIMTARGET)
# All GUI files
ALL_GUI_SRC = gui.c gui_gtk.c gui_gtk_f.c gui_motif.c gui_xmdlg.c gui_xmebw.c gui_athena.c gui_gtk_x11.c gui_x11.c gui_at_sb.c gui_at_fs.c pty.c
ALL_GUI_PRO = gui.pro gui_gtk.pro gui_motif.pro gui_xmdlg.pro gui_athena.pro gui_gtk_x11.pro gui_x11.pro gui_w16.pro gui_w32.pro gui_photon.pro
# }}}
### Command to create dependencies based on #include "..."
### prototype headers are ignored due to -DPROTO, system
### headers #include <...> are ignored if we use the -MM option, as
### e.g. provided by gcc-cpp.
### Include FEAT_GUI to get gependency on gui.h
### Need to change "-I /<path>" to "-isystem /<path>" for GCC 3.x.
CPP_DEPEND = $(CC) -I$(srcdir) -M$(CPP_MM) \
`echo "$(DEPEND_CFLAGS)" $(DEPEND_CFLAGS_FILTER)`
# flags for cproto
# This is for cproto 3 patchlevel 8 or below
# __inline, __attribute__ and __extension__ are not recognized by cproto
# G_IMPLEMENT_INLINES is to avoid functions defined in glib/gutils.h.
NO_ATTR = -D__inline= -D__inline__= -DG_IMPLEMENT_INLINES \
-D"__attribute__\\(x\\)=" -D"__asm__\\(x\\)=" \
-D__extension__= -D__restrict="" \
-D__gnuc_va_list=char -D__builtin_va_list=char
#
# This is for cproto 3 patchlevel 9 or above (currently 4.6)
# __inline and __attribute__ are now recognized by cproto
# -D"foo()=" is not supported by all compilers so do not use it
# NO_ATTR=
#
# maybe the "/usr/bin/cc -E" has to be adjusted for some systems
# This is for cproto 3.5 patchlevel 3:
# PROTO_FLAGS = -f4 -m__ARGS -d -E"$(CPP)" $(NO_ATTR)
#
# Use this for cproto 3 patchlevel 6 or below (use "cproto -V" to check):
# PROTO_FLAGS = -f4 -m__ARGS -d -E"$(CPP)" $(NO_ATTR)
#
# Use this for cproto 3 patchlevel 7 or above (use "cproto -V" to check):
PROTO_FLAGS = -m -M__ARGS -d -E"$(CPP)" $(NO_ATTR)
################################################
## no changes required below this line ##
################################################
SHELL = /bin/sh
.SUFFIXES:
.SUFFIXES: .c .o .pro
PRE_DEFS = -Iproto $(DEFS) $(GUI_DEFS) $(GUI_IPATH) $(CPPFLAGS) $(EXTRA_IPATHS)
POST_DEFS = $(X_CFLAGS) $(MZSCHEME_CFLAGS) $(PERL_CFLAGS) $(PYTHON_CFLAGS) $(TCL_CFLAGS) $(RUBY_CFLAGS) $(EXTRA_DEFS)
ALL_CFLAGS = $(PRE_DEFS) $(CFLAGS) $(PROFILE_CFLAGS) $(POST_DEFS)
# Exclude $CFLAGS for osdef.sh, for Mac 10.4 some flags don't work together
# with "-E".
OSDEF_CFLAGS = $(PRE_DEFS) $(POST_DEFS)
LINT_CFLAGS = -DLINT -I. $(PRE_DEFS) $(POST_DEFS) -Dinline= -D__extension__= -Dalloca=alloca
LINT_EXTRA = -DUSE_SNIFF -DHANGUL_INPUT -D"__attribute__(x)="
DEPEND_CFLAGS = -DPROTO -DDEPEND -DFEAT_GUI $(LINT_CFLAGS)
PFLAGS = $(PROTO_FLAGS) -DPROTO $(LINT_CFLAGS)
ALL_LIB_DIRS = $(GUI_LIBS_DIR) $(X_LIBS_DIR)
ALL_LIBS = $(GUI_LIBS1) $(GUI_X_LIBS) $(GUI_LIBS2) $(X_PRE_LIBS) $(X_LIBS) $(X_EXTRA_LIBS) $(LIBS) $(EXTRA_LIBS) $(MZSCHEME_LIBS) $(PERL_LIBS) $(PYTHON_LIBS) $(TCL_LIBS) $(RUBY_LIBS) $(PROFILE_LIBS)
# abbreviations
DEST_BIN = $(DESTDIR)$(BINDIR)
DEST_VIM = $(DESTDIR)$(VIMLOC)
DEST_RT = $(DESTDIR)$(VIMRTLOC)
DEST_HELP = $(DESTDIR)$(HELPSUBLOC)
DEST_COL = $(DESTDIR)$(COLSUBLOC)
DEST_SYN = $(DESTDIR)$(SYNSUBLOC)
DEST_IND = $(DESTDIR)$(INDSUBLOC)
DEST_AUTO = $(DESTDIR)$(AUTOSUBLOC)
DEST_PLUG = $(DESTDIR)$(PLUGSUBLOC)
DEST_FTP = $(DESTDIR)$(FTPLUGSUBLOC)
DEST_LANG = $(DESTDIR)$(LANGSUBLOC)
DEST_COMP = $(DESTDIR)$(COMPSUBLOC)
DEST_KMAP = $(DESTDIR)$(KMAPSUBLOC)
DEST_MACRO = $(DESTDIR)$(MACROSUBLOC)
DEST_TOOLS = $(DESTDIR)$(TOOLSSUBLOC)
DEST_TUTOR = $(DESTDIR)$(TUTORSUBLOC)
DEST_SPELL = $(DESTDIR)$(SPELLSUBLOC)
DEST_SCRIPT = $(DESTDIR)$(SCRIPTLOC)
DEST_PRINT = $(DESTDIR)$(PRINTSUBLOC)
DEST_MAN_TOP = $(DESTDIR)$(MANDIR)
# We assume that the ".../man/xx/man1/" directory is for latin1 manual pages.
# Some systems use UTF-8, but these should find the ".../man/xx.UTF-8/man1/"
# directory first.
# FreeBSD uses ".../man/xx.ISO8859-1/man1" for latin1, use that one too.
DEST_MAN = $(DEST_MAN_TOP)$(MAN1DIR)
DEST_MAN_FR = $(DEST_MAN_TOP)/fr$(MAN1DIR)
DEST_MAN_FR_I = $(DEST_MAN_TOP)/fr.ISO8859-1$(MAN1DIR)
DEST_MAN_FR_U = $(DEST_MAN_TOP)/fr.UTF-8$(MAN1DIR)
DEST_MAN_IT = $(DEST_MAN_TOP)/it$(MAN1DIR)
DEST_MAN_IT_I = $(DEST_MAN_TOP)/it.ISO8859-1$(MAN1DIR)
DEST_MAN_IT_U = $(DEST_MAN_TOP)/it.UTF-8$(MAN1DIR)
DEST_MAN_PL = $(DEST_MAN_TOP)/pl$(MAN1DIR)
DEST_MAN_PL_I = $(DEST_MAN_TOP)/pl.ISO8859-2$(MAN1DIR)
DEST_MAN_PL_U = $(DEST_MAN_TOP)/pl.UTF-8$(MAN1DIR)
DEST_MAN_RU = $(DEST_MAN_TOP)/ru.KOI8-R$(MAN1DIR)
DEST_MAN_RU_U = $(DEST_MAN_TOP)/ru.UTF-8$(MAN1DIR)
# BASIC_SRC: files that are always used
# GUI_SRC: extra GUI files for current configuration
# ALL_GUI_SRC: all GUI files for Unix
#
# SRC: files used for current configuration
# TAGS_SRC: source files used for make tags
# TAGS_INCL: include files used for make tags
# ALL_SRC: source files used for make depend and make lint
TAGS_INCL = *.h
BASIC_SRC = \
buffer.c \
charset.c \
diff.c \
digraph.c \
edit.c \
eval.c \
ex_cmds.c \
ex_cmds2.c \
ex_docmd.c \
ex_eval.c \
ex_getln.c \
fileio.c \
fold.c \
getchar.c \
hardcopy.c \
hashtab.c \
if_cscope.c \
if_xcmdsrv.c \
main.c \
mark.c \
memfile.c \
memline.c \
menu.c \
message.c \
misc1.c \
misc2.c \
move.c \
mbyte.c \
normal.c \
ops.c \
option.c \
os_unix.c \
auto/pathdef.c \
popupmnu.c \
quickfix.c \
regexp.c \
screen.c \
search.c \
spell.c \
syntax.c \
tag.c \
term.c \
ui.c \
undo.c \
version.c \
window.c \
$(OS_EXTRA_SRC)
SRC = $(BASIC_SRC) $(GUI_SRC) $(HANGULIN_SRC) $(MZSCHEME_SRC) \
$(PERL_SRC) $(PYTHON_SRC) $(TCL_SRC) $(RUBY_SRC) \
$(SNIFF_SRC) $(WORKSHOP_SRC) $(WSDEBUG_SRC)
TAGS_SRC = *.c *.cpp if_perl.xs
EXTRA_SRC = hangulin.c if_mzsch.c auto/if_perl.c if_perlsfio.c \
if_python.c if_tcl.c if_ruby.c if_sniff.c gui_beval.c \
workshop.c wsdebug.c integration.c netbeans.c
# All sources, also the ones that are not configured
ALL_SRC = $(BASIC_SRC) $(ALL_GUI_SRC) $(EXTRA_SRC)
# Which files to check with lint. Select one of these three lines. ALL_SRC
# checks more, but may not work well for checking a GUI that wasn't configured.
# The perl sources also don't work well with lint.
LINT_SRC = $(BASIC_SRC) $(GUI_SRC) $(HANGULIN_SRC) $(PYTHON_SRC) $(TCL_SRC) \
$(SNIFF_SRC) $(WORKSHOP_SRC) $(WSDEBUG_SRC) $(NETBEANS_SRC)
#LINT_SRC = $(SRC)
#LINT_SRC = $(ALL_SRC)
OBJ = \
objects/buffer.o \
objects/charset.o \
objects/diff.o \
objects/digraph.o \
objects/edit.o \
objects/eval.o \
objects/ex_cmds.o \
objects/ex_cmds2.o \
objects/ex_docmd.o \
objects/ex_eval.o \
objects/ex_getln.o \
objects/fileio.o \
objects/fold.o \
objects/getchar.o \
objects/hardcopy.o \
objects/hashtab.o \
$(HANGULIN_OBJ) \
objects/if_cscope.o \
objects/if_xcmdsrv.o \
objects/main.o \
objects/mark.o \
objects/memfile.o \
objects/memline.o \
objects/menu.o \
objects/message.o \
objects/misc1.o \
objects/misc2.o \
objects/move.o \
objects/mbyte.o \
objects/normal.o \
objects/ops.o \
objects/option.o \
objects/os_unix.o \
objects/pathdef.o \
objects/popupmnu.o \
objects/quickfix.o \
objects/regexp.o \
objects/screen.o \
objects/search.o \
objects/spell.o \
objects/syntax.o \
$(SNIFF_OBJ) \
objects/tag.o \
objects/term.o \
objects/ui.o \
objects/undo.o \
objects/window.o \
$(GUI_OBJ) \
$(MZSCHEME_OBJ) \
$(PERL_OBJ) \
$(PYTHON_OBJ) \
$(TCL_OBJ) \
$(RUBY_OBJ) \
$(OS_EXTRA_OBJ) \
$(WORKSHOP_OBJ) \
$(NETBEANS_OBJ) \
$(WSDEBUG_OBJ)
PRO_AUTO = \
buffer.pro \
charset.pro \
diff.pro \
digraph.pro \
edit.pro \
eval.pro \
ex_cmds.pro \
ex_cmds2.pro \
ex_docmd.pro \
ex_eval.pro \
ex_getln.pro \
fileio.pro \
fold.pro \
getchar.pro \
hardcopy.pro \
hashtab.pro \
hangulin.pro \
if_cscope.pro \
if_xcmdsrv.pro \
if_python.pro \
if_ruby.pro \
main.pro \
mark.pro \
memfile.pro \
memline.pro \
menu.pro \
message.pro \
misc1.pro \
misc2.pro \
move.pro \
mbyte.pro \
normal.pro \
ops.pro \
option.pro \
os_unix.pro \
popupmnu.pro \
quickfix.pro \
regexp.pro \
screen.pro \
search.pro \
spell.pro \
syntax.pro \
tag.pro \
term.pro \
termlib.pro \
ui.pro \
undo.pro \
version.pro \
window.pro \
gui_beval.pro \
workshop.pro \
netbeans.pro \
$(ALL_GUI_PRO) \
$(TCL_PRO)
# Resources used for the Mac are in one directory.
RSRC_DIR = os_mac_rsrc
PRO_MANUAL = os_amiga.pro os_msdos.pro os_win16.pro os_win32.pro \
os_mswin.pro os_beos.pro os_vms.pro os_riscos.pro $(PERL_PRO)
# Default target is making the executable and tools
all: $(VIMTARGET) $(TOOLS) languages $(GUI_BUNDLE)
tools: $(TOOLS)
# Run configure with all the setting from above.
#
# Note: auto/config.h doesn't depend on configure, because running configure
# doesn't always update auto/config.h. The timestamp isn't changed if the
# file contents didn't change (to avoid recompiling everything). Including a
# dependency on auto/config.h would cause running configure each time when
# auto/config.h isn't updated. The dependency on auto/config.mk should make
# sure configure is run when it's needed.
#
config auto/config.mk: auto/configure config.mk.in config.h.in
GUI_INC_LOC="$(GUI_INC_LOC)" GUI_LIB_LOC="$(GUI_LIB_LOC)" \
CC="$(CC)" CPPFLAGS="$(CPPFLAGS)" CFLAGS="$(CFLAGS)" \
LDFLAGS="$(LDFLAGS)" $(CONF_SHELL) srcdir="$(srcdir)" \
./configure $(CONF_OPT_GUI) $(CONF_OPT_X) $(CONF_OPT_XSMP) \
$(CONF_OPT_DARWIN) $(CONF_OPT_PERL) $(CONF_OPT_PYTHON) \
$(CONF_OPT_TCL) $(CONF_OPT_RUBY) $(CONF_OPT_NLS) \
$(CONF_OPT_CSCOPE) $(CONF_OPT_MULTIBYTE) $(CONF_OPT_INPUT) \
$(CONF_OPT_OUTPUT) $(CONF_OPT_GPM) $(CONF_OPT_WORKSHOP) \
$(CONF_OPT_SNIFF) $(CONF_OPT_FEAT) $(CONF_TERM_LIB) \
$(CONF_OPT_COMPBY) $(CONF_OPT_ACL) $(CONF_OPT_NETBEANS) \
$(CONF_ARGS) $(CONF_OPT_MZSCHEME) $(CONF_OPT_PLTHOME)
# Use "make reconfig" to rerun configure without cached values.
# When config.h changes, most things will be recompiled automatically.
# Invoke $(MAKE) to run config with the empty auto/config.mk.
# Invoke $(MAKE) to build all with the filled auto/config.mk.
reconfig: scratch clean
$(MAKE) -f Makefile config
$(MAKE) -f Makefile all
# Run autoconf to produce auto/configure.
# Note:
# - DO NOT RUN autoconf MANUALLY! It will overwrite ./configure instead of
# producing auto/configure.
# - autoconf is not run automatically, because a patch usually changes both
# configure.in and auto/configure but can't update the timestamps. People
# who do not have (the correct version of) autoconf would run into trouble.
#
# Two tricks are required to make autoconf put its output in the "auto" dir:
# - Temporarily move the ./configure script to ./configure.save. Don't
# overwrite it, it's probably the result of an aborted autoconf.
# - Use sed to change ./config.log to auto/config.log in the configure script.
# Autoconf 2.5x (2.59 at least) produces a few more files that we need to take
# care of:
# - configure.lineno: has the line numbers replaced with $LINENO. That
# improves patches a LOT, thus use it instead (until someone says it doesn't
# work on some system).
# - autom4te.cache directory is created and not cleaned up. Delete it.
# - Uses ">config.log" instead of "./config.log".
autoconf:
if test ! -f configure.save; then mv configure configure.save; fi
autoconf
sed -e 's+>config.log+>auto/config.log+' -e 's+\./config.log+auto/config.log+' configure > auto/configure
chmod 755 auto/configure
mv -f configure.save configure
-rm -rf autom4te.cache
-rm -f auto/config.status auto/config.cache
# Re-execute this Makefile to include the new auto/config.mk produced by
# configure Only used when typing "make" with a fresh auto/config.mk.
myself:
$(MAKE) -f Makefile all
# The normal command to compile a .c file to its .o file.
CCC = $(CC) -c -I$(srcdir) $(ALL_CFLAGS)
# Link the target for normal use or debugging.
# A shell script is used to try linking without unneccesary libraries.
$(VIMTARGET): auto/config.mk objects $(OBJ) version.c version.h
$(CCC) version.c -o objects/version.o
@LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \
-o $(VIMTARGET) $(OBJ) objects/version.o $(ALL_LIBS)" \
MAKE="$(MAKE)" sh $(srcdir)/link.sh
xxd/xxd$(EXEEXT): xxd/xxd.c
cd xxd; CC="$(CC)" CFLAGS="$(CPPFLAGS) $(CFLAGS)" \
$(MAKE) -f Makefile
# Build the language specific files if they were unpacked.
# Generate the converted .mo files separately, it's no problem if this fails.
languages:
@if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \
cd $(PODIR); \
CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix); \
fi
-@if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \
cd $(PODIR); CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) converted; \
fi
# Update the *.po files for changes in the sources. Only run manually.
update-po:
cd $(PODIR); CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) update-po
# Generate function prototypes. This is not needed to compile vim, but if
# you want to use it, cproto is out there on the net somewhere -- Webb
#
# When generating os_amiga.pro, os_msdos.pro and os_win32.pro there will be a
# few include files that can not be found, that's OK.
proto: $(PRO_AUTO) $(PRO_MANUAL)
### Would be nice if this would work for "normal" make.
### Currently it only works for (Free)BSD make.
#$(PRO_AUTO): $$(*F).c
# cproto $(PFLAGS) -DFEAT_GUI $(*F).c > $@
# Always define FEAT_GUI. This may generate a few warnings if it's also
# defined in auto/config.h, you can ignore that.
.c.pro:
cproto $(PFLAGS) -DFEAT_GUI $< > proto/$@
echo "/* vim: set ft=c : */" >> proto/$@
os_amiga.pro: os_amiga.c
cproto $(PFLAGS) -DAMIGA -UHAVE_CONFIG_H -DBPTR=char* $< > proto/$@
echo "/* vim: set ft=c : */" >> proto/$@
os_msdos.pro: os_msdos.c
cproto $(PFLAGS) -DMSDOS -UHAVE_CONFIG_H $< > proto/$@
echo "/* vim: set ft=c : */" >> proto/$@
os_win16.pro: os_win16.c
cproto $(PFLAGS) -DWIN16 -UHAVE_CONFIG_H $< > proto/$@
echo "/* vim: set ft=c : */" >> proto/$@
os_win32.pro: os_win32.c
cproto $(PFLAGS) -DWIN32 -UHAVE_CONFIG_H $< > proto/$@
echo "/* vim: set ft=c : */" >> proto/$@
os_mswin.pro: os_mswin.c
cproto $(PFLAGS) -DWIN16 -DWIN32 -UHAVE_CONFIG_H $< > proto/$@
echo "/* vim: set ft=c : */" >> proto/$@
os_beos.pro: os_beos.c
cproto $(PFLAGS) -D__BEOS__ -UHAVE_CONFIG_H $< > proto/$@
echo "/* vim: set ft=c : */" >> proto/$@
os_vms.pro: os_vms.c
# must use os_vms_conf.h for auto/config.h
mv auto/config.h auto/config.h.save
cp os_vms_conf.h auto/config.h
cproto $(PFLAGS) -DVMS -UFEAT_GUI_ATHENA -UFEAT_GUI_NEXTAW -UFEAT_GUI_MOTIF -UFEAT_GUI_GTK $< > proto/$@
echo "/* vim: set ft=c : */" >> proto/$@
rm auto/config.h
mv auto/config.h.save auto/config.h
# if_perl.pro is special: Use the generated if_perl.c for input and remove
# prototypes for local functions.
if_perl.pro: auto/if_perl.c
cproto $(PFLAGS) -DFEAT_GUI auto/if_perl.c | sed "/_VI/d" > proto/$@
notags:
-rm -f tags
# Note: tags is made for the currently configured version, can't include both
# Motif and Athena GUI
# You can ignore error messages for missing files.
tags TAGS: notags
$(TAGPRG) $(TAGS_SRC) $(TAGS_INCL)
# Make a highlight file for types. Requires Exuberant ctags and awk
types: types.vim
types.vim: $(TAGS_SRC) $(TAGS_INCL)
ctags --c-kinds=gstu -o- $(TAGS_SRC) $(TAGS_INCL) |\
awk 'BEGIN{printf("syntax keyword Type\t")}\
{printf("%s ", $$1)}END{print ""}' > $@
# Execute the test scripts. Run these after compiling Vim, before installing.
# This doesn't depend on $(VIMTARGET), because that won't work when configure
# wasn't run yet. Restart make to build it instead.
#
# This will produce a lot of garbage on your screen, including a few error
# messages. Don't worry about that.
# If there is a real error, there will be a difference between "test.out" and
# a "test99.ok" file.
# If everything is alright, the final message will be "ALL DONE".
#
test check:
$(MAKE) -f Makefile $(VIMTARGET)
-if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \
cd $(PODIR); $(MAKE) -f Makefile check VIM=../$(VIMTARGET); \
fi
-if test $(VIMTARGET) != vim -a ! -e vim; then \
ln -s $(VIMTARGET) vim; \
fi
cd testdir; $(MAKE) -f Makefile $(GUI_TESTTARGET) VIMPROG=../$(VIMTARGET) $(GUI_TESTARG)
testclean:
cd testdir; $(MAKE) -f Makefile clean
if test -d $(PODIR); then \
cd $(PODIR); $(MAKE) checkclean; \
fi
#
# Avoid overwriting an existing executable, somebody might be running it and
# overwriting it could cause it to crash. Deleting it is OK, it won't be
# really deleted until all running processes for it have exited. It is
# renamed first, in case the deleting doesn't work.
#
# If you want to keep an older version, rename it before running "make
# install".
#
install: $(GUI_INSTALL)
install_normal: installvim installtools $(INSTALL_LANGS) install-icons
installvim: installvimbin installtutorbin \
installruntime installlinks installmanlinks
installvimbin: $(VIMTARGET) $(DESTDIR)$(exec_prefix) $(DEST_BIN)
-if test -f $(DEST_BIN)/$(VIMTARGET); then \
mv -f $(DEST_BIN)/$(VIMTARGET) $(DEST_BIN)/$(VIMNAME).rm; \
rm -f $(DEST_BIN)/$(VIMNAME).rm; \
fi
$(INSTALL_PROG) $(VIMTARGET) $(DEST_BIN)
$(STRIP) $(DEST_BIN)/$(VIMTARGET)
chmod $(BINMOD) $(DEST_BIN)/$(VIMTARGET)
# may create a link to the new executable from /usr/bin/vi
-$(LINKIT)
# Long list of arguments for the shell script that installs the manual pages
# for one language.
INSTALLMANARGS = $(VIMLOC) $(SCRIPTLOC) $(VIMRCLOC) $(HELPSOURCE) $(MANMOD) \
$(VIMNAME) $(VIMDIFFNAME) $(EVIMNAME)
# Install most of the runtime files
installruntime: installrtbase installmacros installtutor installspell
# install the help files; first adjust the contents for the final location
installrtbase: $(HELPSOURCE)/vim.1 $(DEST_VIM) $(DEST_RT) \
$(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) \
$(DEST_FTP) $(DEST_AUTO) $(DEST_AUTO)/xml $(DEST_PLUG) \
$(DEST_TUTOR) $(DEST_SPELL) $(DEST_COMP)
-$(SHELL) ./installman.sh install $(DEST_MAN) "" $(INSTALLMANARGS)
@echo generating help tags
# Generate the help tags with ":helptags" to handle all languages.
-@cd $(HELPSOURCE); $(MAKE) VIMEXE=$(DEST_BIN)/$(VIMTARGET) vimtags
cd $(HELPSOURCE); \
files=`ls *.txt tags`; \
files="$$files `ls *.??x tags-?? 2>/dev/null || true`"; \
$(INSTALL_DATA) $$files $(DEST_HELP); \
cd $(DEST_HELP); \
chmod $(HELPMOD) $$files
$(INSTALL_DATA) $(HELPSOURCE)/*.pl $(DEST_HELP)
chmod $(SCRIPTMOD) $(DEST_HELP)/*.pl
# install the menu files
$(INSTALL_DATA) $(SCRIPTSOURCE)/menu.vim $(SYS_MENU_FILE)
chmod $(VIMSCRIPTMOD) $(SYS_MENU_FILE)
$(INSTALL_DATA) $(SCRIPTSOURCE)/synmenu.vim $(SYS_SYNMENU_FILE)
chmod $(VIMSCRIPTMOD) $(SYS_SYNMENU_FILE)
$(INSTALL_DATA) $(SCRIPTSOURCE)/delmenu.vim $(SYS_DELMENU_FILE)
chmod $(VIMSCRIPTMOD) $(SYS_DELMENU_FILE)
# install the evim file
$(INSTALL_DATA) $(SCRIPTSOURCE)/mswin.vim $(MSWIN_FILE)
chmod $(VIMSCRIPTMOD) $(MSWIN_FILE)
$(INSTALL_DATA) $(SCRIPTSOURCE)/evim.vim $(EVIM_FILE)
chmod $(VIMSCRIPTMOD) $(EVIM_FILE)
# install the bugreport file
$(INSTALL_DATA) $(SCRIPTSOURCE)/bugreport.vim $(SYS_BUGR_FILE)
chmod $(VIMSCRIPTMOD) $(SYS_BUGR_FILE)
# install the example vimrc files
$(INSTALL_DATA) $(SCRIPTSOURCE)/vimrc_example.vim $(DEST_SCRIPT)
chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/vimrc_example.vim
$(INSTALL_DATA) $(SCRIPTSOURCE)/gvimrc_example.vim $(DEST_SCRIPT)
chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/gvimrc_example.vim
# install the file type detection files
$(INSTALL_DATA) $(SCRIPTSOURCE)/filetype.vim $(SYS_FILETYPE_FILE)
chmod $(VIMSCRIPTMOD) $(SYS_FILETYPE_FILE)
$(INSTALL_DATA) $(SCRIPTSOURCE)/ftoff.vim $(SYS_FTOFF_FILE)
chmod $(VIMSCRIPTMOD) $(SYS_FTOFF_FILE)
$(INSTALL_DATA) $(SCRIPTSOURCE)/scripts.vim $(SYS_SCRIPTS_FILE)
chmod $(VIMSCRIPTMOD) $(SYS_SCRIPTS_FILE)
$(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugin.vim $(SYS_FTPLUGIN_FILE)
chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGIN_FILE)
$(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugof.vim $(SYS_FTPLUGOF_FILE)
chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGOF_FILE)
$(INSTALL_DATA) $(SCRIPTSOURCE)/indent.vim $(SYS_INDENT_FILE)
chmod $(VIMSCRIPTMOD) $(SYS_INDENT_FILE)
$(INSTALL_DATA) $(SCRIPTSOURCE)/indoff.vim $(SYS_INDOFF_FILE)
chmod $(VIMSCRIPTMOD) $(SYS_INDOFF_FILE)
$(INSTALL_DATA) $(SCRIPTSOURCE)/optwin.vim $(SYS_OPTWIN_FILE)
chmod $(VIMSCRIPTMOD) $(SYS_OPTWIN_FILE)
# install the print resource files
cd $(PRINTSOURCE); $(INSTALL_DATA) *.ps $(DEST_PRINT)
cd $(DEST_PRINT); chmod $(FILEMOD) *.ps
# install the colorscheme files
cd $(COLSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_COL)
cd $(DEST_COL); chmod $(HELPMOD) *.vim README.txt
# install the syntax files
cd $(SYNSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_SYN)
cd $(DEST_SYN); chmod $(HELPMOD) *.vim README.txt
# install the indent files
cd $(INDSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_IND)
cd $(DEST_IND); chmod $(HELPMOD) *.vim README.txt
# install the standard autoload files
cd $(AUTOSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_AUTO)
cd $(DEST_AUTO); chmod $(HELPMOD) *.vim README.txt
cd $(AUTOSOURCE)/xml; $(INSTALL_DATA) *.vim $(DEST_AUTO)/xml
cd $(DEST_AUTO)/xml; chmod $(HELPMOD) *.vim
# install the standard plugin files
cd $(PLUGSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_PLUG)
cd $(DEST_PLUG); chmod $(HELPMOD) *.vim README.txt
# install the ftplugin files
cd $(FTPLUGSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_FTP)
cd $(DEST_FTP); chmod $(HELPMOD) *.vim README.txt
# install the compiler files
cd $(COMPSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_COMP)
cd $(DEST_COMP); chmod $(HELPMOD) *.vim README.txt
installmacros: $(DEST_VIM) $(DEST_RT) $(DEST_MACRO)
$(INSTALL_DATA_R) $(MACROSOURCE)/* $(DEST_MACRO)
chmod $(DIRMOD) `find $(DEST_MACRO) -type d -print`
chmod $(FILEMOD) `find $(DEST_MACRO) -type f -print`
chmod $(SCRIPTMOD) $(DEST_MACRO)/less.sh
# When using CVS some CVS directories might have been copied.
cvs=`find $(DEST_MACRO) \( -name CVS -o -name AAPDIR \) -print`; \
if test -n "$$cvs"; then \
rm -rf $$cvs; \
fi
# install the tutor files
installtutorbin: $(DEST_VIM)
$(INSTALL_DATA) vimtutor $(DEST_BIN)/$(VIMNAME)tutor
chmod $(SCRIPTMOD) $(DEST_BIN)/$(VIMNAME)tutor
$(INSTALL_DATA) gvimtutor $(DEST_BIN)/$(GVIMNAME)tutor
chmod $(SCRIPTMOD) $(DEST_BIN)/$(GVIMNAME)tutor
installtutor: $(DEST_RT) $(DEST_TUTOR)
-$(INSTALL_DATA) $(TUTORSOURCE)/README* $(TUTORSOURCE)/tutor* $(DEST_TUTOR)
chmod $(HELPMOD) $(DEST_TUTOR)/*
# Install the spell files, if they exist. This assumes at least the English
# spell file is there.
installspell: $(DEST_VIM) $(DEST_RT) $(DEST_SPELL)
if test -f $(SPELLSOURCE)/en.latin1.spl; then \
$(INSTALL_DATA) $(SPELLSOURCE)/*.spl $(SPELLSOURCE)/*.sug $(SPELLSOURCE)/*.vim $(DEST_SPELL); \
chmod $(HELPMOD) $(DEST_SPELL)/*.spl $(DEST_SPELL)/*.sug $(DEST_SPELL)/*.vim; \
fi
# install helper program xxd
installtools: $(TOOLS) $(DESTDIR)$(exec_prefix) $(DEST_BIN) \
$(TOOLSSOURCE) $(DEST_VIM) $(DEST_RT) $(DEST_TOOLS) \
$(INSTALL_TOOL_LANGS)
if test -f $(DEST_BIN)/xxd$(EXEEXT); then \
mv -f $(DEST_BIN)/xxd$(EXEEXT) $(DEST_BIN)/xxd.rm; \
rm -f $(DEST_BIN)/xxd.rm; \
fi
$(INSTALL_PROG) xxd/xxd$(EXEEXT) $(DEST_BIN)
$(STRIP) $(DEST_BIN)/xxd$(EXEEXT)
chmod $(BINMOD) $(DEST_BIN)/xxd$(EXEEXT)
-$(SHELL) ./installman.sh xxd $(DEST_MAN) "" $(INSTALLMANARGS)
# install the runtime tools
$(INSTALL_DATA_R) $(TOOLSSOURCE)/* $(DEST_TOOLS)
# When using CVS some CVS directories might have been copied.
cvs=`find $(DEST_TOOLS) \( -name CVS -o -name AAPDIR \) -print`; \
if test -n "$$cvs"; then \
rm -rf $$cvs; \
fi
-chmod $(FILEMOD) $(DEST_TOOLS)/*
# replace the path in some tools
perlpath=`./which.sh perl` && sed -e "s+/usr/bin/perl+$$perlpath+" $(TOOLSSOURCE)/efm_perl.pl >$(DEST_TOOLS)/efm_perl.pl
awkpath=`./which.sh nawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \
awkpath=`./which.sh gawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \
awkpath=`./which.sh awk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; fi; fi
-chmod $(SCRIPTMOD) `grep -l "^#!" $(DEST_TOOLS)/*`
# install the language specific files for tools, if they were unpacked
install-tool-languages:
-$(SHELL) ./installman.sh xxd $(DEST_MAN_FR) "-fr" $(INSTALLMANARGS)
-$(SHELL) ./installman.sh xxd $(DEST_MAN_FR_I) "-fr" $(INSTALLMANARGS)
-$(SHELL) ./installman.sh xxd $(DEST_MAN_FR_U) "-fr.UTF-8" $(INSTALLMANARGS)
-$(SHELL) ./installman.sh xxd $(DEST_MAN_IT) "-it" $(INSTALLMANARGS)
-$(SHELL) ./installman.sh xxd $(DEST_MAN_IT_I) "-it" $(INSTALLMANARGS)
-$(SHELL) ./installman.sh xxd $(DEST_MAN_IT_U) "-it.UTF-8" $(INSTALLMANARGS)
-$(SHELL) ./installman.sh xxd $(DEST_MAN_PL) "-pl" $(INSTALLMANARGS)
-$(SHELL) ./installman.sh xxd $(DEST_MAN_PL_I) "-pl" $(INSTALLMANARGS)
-$(SHELL) ./installman.sh xxd $(DEST_MAN_PL_U) "-pl.UTF-8" $(INSTALLMANARGS)
-$(SHELL) ./installman.sh xxd $(DEST_MAN_RU) "-ru" $(INSTALLMANARGS)
-$(SHELL) ./installman.sh xxd $(DEST_MAN_RU_U) "-ru.UTF-8" $(INSTALLMANARGS)
# install the language specific files, if they were unpacked
install-languages: languages $(DEST_LANG) $(DEST_KMAP)
-$(SHELL) ./installman.sh install $(DEST_MAN_FR) "-fr" $(INSTALLMANARGS)
-$(SHELL) ./installman.sh install $(DEST_MAN_FR_I) "-fr" $(INSTALLMANARGS)
-$(SHELL) ./installman.sh install $(DEST_MAN_FR_U) "-fr.UTF-8" $(INSTALLMANARGS)
-$(SHELL) ./installman.sh install $(DEST_MAN_IT) "-it" $(INSTALLMANARGS)
-$(SHELL) ./installman.sh install $(DEST_MAN_IT_I) "-it" $(INSTALLMANARGS)
-$(SHELL) ./installman.sh install $(DEST_MAN_IT_U) "-it.UTF-8" $(INSTALLMANARGS)
-$(SHELL) ./installman.sh install $(DEST_MAN_PL) "-pl" $(INSTALLMANARGS)
-$(SHELL) ./installman.sh install $(DEST_MAN_PL_I) "-pl" $(INSTALLMANARGS)
-$(SHELL) ./installman.sh install $(DEST_MAN_PL_U) "-pl.UTF-8" $(INSTALLMANARGS)
-$(SHELL) ./installman.sh install $(DEST_MAN_RU) "-ru" $(INSTALLMANARGS)
-$(SHELL) ./installman.sh install $(DEST_MAN_RU_U) "-ru.UTF-8" $(INSTALLMANARGS)
-$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
$(DEST_MAN_FR) $(INSTALLMLARGS)
-$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
$(DEST_MAN_FR_I) $(INSTALLMLARGS)
-$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
$(DEST_MAN_FR_U) $(INSTALLMLARGS)
-$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
$(DEST_MAN_IT) $(INSTALLMLARGS)
-$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
$(DEST_MAN_IT_I) $(INSTALLMLARGS)
-$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
$(DEST_MAN_IT_U) $(INSTALLMLARGS)
-$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
$(DEST_MAN_PL) $(INSTALLMLARGS)
-$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
$(DEST_MAN_PL_I) $(INSTALLMLARGS)
-$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
$(DEST_MAN_PL_U) $(INSTALLMLARGS)
-$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
$(DEST_MAN_RU) $(INSTALLMLARGS)
-$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
$(DEST_MAN_RU_U) $(INSTALLMLARGS)
if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \
cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) LOCALEDIR=$(DEST_LANG) \
INSTALL_DATA=$(INSTALL_DATA) FILEMOD=$(FILEMOD) install; \
fi
if test -d $(LANGSOURCE); then \
$(INSTALL_DATA) $(LANGSOURCE)/README.txt $(LANGSOURCE)/*.vim $(DEST_LANG); \
chmod $(FILEMOD) $(DEST_LANG)/README.txt $(DEST_LANG)/*.vim; \
fi
if test -d $(KMAPSOURCE); then \
$(INSTALL_DATA) $(KMAPSOURCE)/README.txt $(KMAPSOURCE)/*.vim $(DEST_KMAP); \
chmod $(FILEMOD) $(DEST_KMAP)/README.txt $(DEST_KMAP)/*.vim; \
fi
# install the icons for KDE, if the directory exists and the icon doesn't.
ICON48PATH = $(DESTDIR)$(DATADIR)/icons/hicolor/48x48/apps
ICON32PATH = $(DESTDIR)$(DATADIR)/icons/locolor/32x32/apps
ICON16PATH = $(DESTDIR)$(DATADIR)/icons/locolor/16x16/apps
KDEPATH = $(HOME)/.kde/share/icons
install-icons:
if test -d $(ICON48PATH) -a -w $(ICON48PATH) \
-a ! -f $(ICON48PATH)/gvim.png; then \
$(INSTALL_DATA) $(SCRIPTSOURCE)/vim48x48.png $(ICON48PATH)/gvim.png; \
fi
if test -d $(ICON32PATH) -a -w $(ICON32PATH) \
-a ! -f $(ICON32PATH)/gvim.png; then \
$(INSTALL_DATA) $(SCRIPTSOURCE)/vim32x32.png $(ICON32PATH)/gvim.png; \
fi
if test -d $(ICON16PATH) -a -w $(ICON16PATH) \
-a ! -f $(ICON16PATH)/gvim.png; then \
$(INSTALL_DATA) $(SCRIPTSOURCE)/vim16x16.png $(ICON16PATH)/gvim.png; \
fi
$(HELPSOURCE)/vim.1 $(MACROSOURCE) $(TOOLSSOURCE):
@echo Runtime files not found.
@echo You need to unpack the runtime archive before running "make install".
test -f error
$(DESTDIR)$(exec_prefix) $(DEST_BIN) \
$(DEST_VIM) $(DEST_RT) $(DEST_HELP) \
$(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) $(DEST_FTP) \
$(DEST_LANG) $(DEST_KMAP) $(DEST_COMP) \
$(DEST_MACRO) $(DEST_TOOLS) $(DEST_TUTOR) $(DEST_SPELL) \
$(DEST_AUTO) $(DEST_AUTO)/xml $(DEST_PLUG):
-$(SHELL) ./mkinstalldirs $@
-chmod $(DIRMOD) $@
# create links from various names to vim. This is only done when the links
# (or executables with the same name) don't exist yet.
installlinks: $(GUI_TARGETS) \
$(DEST_BIN)/$(EXTARGET) \
$(DEST_BIN)/$(VIEWTARGET) \
$(DEST_BIN)/$(RVIMTARGET) \
$(DEST_BIN)/$(RVIEWTARGET) \
$(INSTALLVIMDIFF)
installglinks: $(DEST_BIN)/$(GVIMTARGET) \
$(DEST_BIN)/$(GVIEWTARGET) \
$(DEST_BIN)/$(RGVIMTARGET) \
$(DEST_BIN)/$(RGVIEWTARGET) \
$(DEST_BIN)/$(EVIMTARGET) \
$(DEST_BIN)/$(EVIEWTARGET) \
$(INSTALLGVIMDIFF)
installvimdiff: $(DEST_BIN)/$(VIMDIFFTARGET)
installgvimdiff: $(DEST_BIN)/$(GVIMDIFFTARGET)
$(DEST_BIN)/$(EXTARGET):
cd $(DEST_BIN); ln -s $(VIMTARGET) $(EXTARGET)
$(DEST_BIN)/$(VIEWTARGET):
cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIEWTARGET)
$(DEST_BIN)/$(GVIMTARGET):
cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMTARGET)
$(DEST_BIN)/$(GVIEWTARGET):
cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIEWTARGET)
$(DEST_BIN)/$(RVIMTARGET):
cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIMTARGET)
$(DEST_BIN)/$(RVIEWTARGET):
cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIEWTARGET)
$(DEST_BIN)/$(RGVIMTARGET):
cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIMTARGET)
$(DEST_BIN)/$(RGVIEWTARGET):
cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIEWTARGET)
$(DEST_BIN)/$(VIMDIFFTARGET):
cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIMDIFFTARGET)
$(DEST_BIN)/$(GVIMDIFFTARGET):
cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMDIFFTARGET)
$(DEST_BIN)/$(EVIMTARGET):
cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIMTARGET)
$(DEST_BIN)/$(EVIEWTARGET):
cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIEWTARGET)
# Create links for the manual pages with various names to vim. This is only
# done when the links (or manpages with the same name) don't exist yet.
INSTALLMLARGS = $(VIMNAME) $(VIMDIFFNAME) $(EVIMNAME) \
$(EXNAME) $(VIEWNAME) $(RVIMNAME) $(RVIEWNAME) \
$(GVIMNAME) $(GVIEWNAME) $(RGVIMNAME) $(RGVIEWNAME) \
$(GVIMDIFFNAME) $(EVIEWNAME)
installmanlinks:
-$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
$(DEST_MAN) $(INSTALLMLARGS)
uninstall: uninstall_runtime
-rm -f $(DEST_BIN)/$(VIMTARGET)
-rm -f $(DEST_BIN)/vimtutor
-rm -f $(DEST_BIN)/gvimtutor
-rm -f $(DEST_BIN)/$(EXTARGET) $(DEST_BIN)/$(VIEWTARGET)
-rm -f $(DEST_BIN)/$(GVIMTARGET) $(DEST_BIN)/$(GVIEWTARGET)
-rm -f $(DEST_BIN)/$(RVIMTARGET) $(DEST_BIN)/$(RVIEWTARGET)
-rm -f $(DEST_BIN)/$(RGVIMTARGET) $(DEST_BIN)/$(RGVIEWTARGET)
-rm -f $(DEST_BIN)/$(VIMDIFFTARGET) $(DEST_BIN)/$(GVIMDIFFTARGET)
-rm -f $(DEST_BIN)/$(EVIMTARGET) $(DEST_BIN)/$(EVIEWTARGET)
-rm -f $(DEST_BIN)/xxd$(EXEEXT)
# Note: the "rmdir" will fail if any files were added after "make install"
uninstall_runtime:
-$(SHELL) ./installman.sh uninstall $(DEST_MAN) "" $(INSTALLMANARGS)
-$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR) "" $(INSTALLMANARGS)
-$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR_I) "" $(INSTALLMANARGS)
-$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR_U) "" $(INSTALLMANARGS)
-$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT) "" $(INSTALLMANARGS)
-$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT_I) "" $(INSTALLMANARGS)
-$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT_U) "" $(INSTALLMANARGS)
-$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL) "" $(INSTALLMANARGS)
-$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL_I) "" $(INSTALLMANARGS)
-$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL_U) "" $(INSTALLMANARGS)
-$(SHELL) ./installman.sh uninstall $(DEST_MAN_RU) "" $(INSTALLMANARGS)
-$(SHELL) ./installman.sh uninstall $(DEST_MAN_RU_U) "" $(INSTALLMANARGS)
-$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
$(DEST_MAN) $(INSTALLMLARGS)
-$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
$(DEST_MAN_FR) $(INSTALLMLARGS)
-$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
$(DEST_MAN_FR_I) $(INSTALLMLARGS)
-$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
$(DEST_MAN_FR_U) $(INSTALLMLARGS)
-$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
$(DEST_MAN_IT) $(INSTALLMLARGS)
-$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
$(DEST_MAN_IT_I) $(INSTALLMLARGS)
-$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
$(DEST_MAN_IT_U) $(INSTALLMLARGS)
-$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
$(DEST_MAN_PL) $(INSTALLMLARGS)
-$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
$(DEST_MAN_PL_I) $(INSTALLMLARGS)
-$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
$(DEST_MAN_PL_U) $(INSTALLMLARGS)
-$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
$(DEST_MAN_RU) $(INSTALLMLARGS)
-$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
$(DEST_MAN_RU_U) $(INSTALLMLARGS)
-rm -f $(DEST_MAN)/xxd.1
-rm -f $(DEST_MAN_FR)/xxd.1 $(DEST_MAN_FR_I)/xxd.1 $(DEST_MAN_FR_U)/xxd.1
-rm -f $(DEST_MAN_IT)/xxd.1 $(DEST_MAN_IT_I)/xxd.1 $(DEST_MAN_IT_U)/xxd.1
-rm -f $(DEST_MAN_PL)/xxd.1 $(DEST_MAN_PL_I)/xxd.1 $(DEST_MAN_PL_U)/xxd.1
-rm -f $(DEST_MAN_RU)/xxd.1 $(DEST_MAN_RU_U)/xxd.1
-rm -f $(DEST_HELP)/*.txt $(DEST_HELP)/tags $(DEST_HELP)/*.pl
-rm -f $(DEST_HELP)/*.??x $(DEST_HELP)/tags-??
-rm -f $(SYS_MENU_FILE) $(SYS_SYNMENU_FILE) $(SYS_DELMENU_FILE)
-rm -f $(SYS_BUGR_FILE) $(EVIM_FILE) $(MSWIN_FILE)
-rm -f $(DEST_SCRIPT)/gvimrc_example.vim $(DEST_SCRIPT)/vimrc_example.vim
-rm -f $(SYS_FILETYPE_FILE) $(SYS_FTOFF_FILE) $(SYS_SCRIPTS_FILE)
-rm -f $(SYS_INDOFF_FILE) $(SYS_INDENT_FILE)
-rm -f $(SYS_FTPLUGOF_FILE) $(SYS_FTPLUGIN_FILE)
-rm -f $(SYS_OPTWIN_FILE)
-rm -f $(DEST_COL)/*.vim $(DEST_COL)/README.txt
-rm -f $(DEST_SYN)/*.vim $(DEST_SYN)/README.txt
-rm -f $(DEST_IND)/*.vim $(DEST_IND)/README.txt
-rm -rf $(DEST_MACRO)
-rm -rf $(DEST_TUTOR)
-rm -rf $(DEST_SPELL)
-rm -rf $(DEST_TOOLS)
-rm -rf $(DEST_LANG)
-rm -rf $(DEST_KMAP)
-rm -rf $(DEST_COMP)
-rm -f $(DEST_PRINT)/*.ps
-rmdir $(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND)
-rm -rf $(DEST_FTP)/*.vim $(DEST_FTP)/README.txt
-rm -f $(DEST_AUTO)/*.vim $(DEST_AUTO)/README.txt $(DEST_AUTO)/xml/*.vim
-rm -f $(DEST_PLUG)/*.vim $(DEST_PLUG)/README.txt
-rmdir $(DEST_FTP) $(DEST_AUTO)/xml $(DEST_AUTO) $(DEST_PLUG) $(DEST_RT)
# This will fail when other Vim versions are installed, no worries.
-rmdir $(DEST_VIM)
# Clean up all the files that have been produced, except configure's.
# We support common typing mistakes for Juergen! :-)
clean celan: testclean
-rm -f *.o objects/* core $(VIMTARGET).core $(VIMTARGET) vim xxd/*.o
-rm -f $(TOOLS) auto/osdef.h auto/pathdef.c auto/if_perl.c
-rm -f conftest* *~ auto/link.sed
-rm -rf $(APPDIR)
if test -d $(PODIR); then \
cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) clean; \
fi
# Make a shadow directory for compilation on another system or with different
# features.
SHADOWDIR = shadow
shadow: runtime pixmaps
mkdir $(SHADOWDIR)
cd $(SHADOWDIR); ln -s ../*.[ch] ../*.in ../*.sh ../*.xs ../*.xbm ../toolcheck ../proto ../vimtutor ../gvimtutor ../mkinstalldirs .
mkdir $(SHADOWDIR)/auto
cd $(SHADOWDIR)/auto; ln -s ../../auto/configure .
cd $(SHADOWDIR); rm -f auto/link.sed
cp Makefile configure $(SHADOWDIR)
rm -f $(SHADOWDIR)/auto/config.mk $(SHADOWDIR)/config.mk.dist
cp config.mk.dist $(SHADOWDIR)/auto/config.mk
cp config.mk.dist $(SHADOWDIR)
mkdir $(SHADOWDIR)/xxd
cd $(SHADOWDIR)/xxd; ln -s ../../xxd/*.[ch] ../../xxd/Make* .
if test -d $(RSRC_DIR); then \
cd $(SHADOWDIR); \
ln -s ../infplist.xml .; \
ln -s ../$(RSRC_DIR) ../os_mac.rsr.hqx ../dehqx.py .; \
fi
mkdir $(SHADOWDIR)/testdir
cd $(SHADOWDIR)/testdir; ln -s ../../testdir/Makefile \
../../testdir/vimrc.unix \
../../testdir/*.in \
../../testdir/unix.vim \
../../testdir/*.ok .
# Link needed for doing "make install" in a shadow directory.
runtime:
-ln -s ../runtime .
# Link needed for doing "make" using GTK in a shadow directory.
pixmaps:
-ln -s ../pixmaps .
# Update the synmenu.vim file with the latest Syntax menu.
# This is only needed when runtime/makemenu.vim was changed.
menu: ./vim ../runtime/makemenu.vim
./vim -u ../runtime/makemenu.vim
# Start configure from scratch
scrub scratch:
-rm -f auto/config.status auto/config.cache config.log auto/config.log
-rm -f auto/config.h auto/link.log auto/link.sed auto/config.mk
touch auto/config.h
cp config.mk.dist auto/config.mk
distclean: clean scratch
-rm -f tags
dist: distclean
@echo
@echo Making the distribution has to be done in the top directory
mdepend:
-@rm -f Makefile~
cp Makefile Makefile~
sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make
@for i in $(ALL_SRC) ; do \
echo "$$i" ; \
echo `echo "$$i" | sed -e 's/[^ ]*\.c$$/objects\/\1.o/'`": $$i" `\
$(CPP) $$i |\
grep '^# .*"\./.*\.h"' |\
sort -t'"' -u +1 -2 |\
sed -e 's/.*"\.\/\(.*\)".*/\1/'\
` >> tmp_make ; \
done
mv tmp_make Makefile
depend:
-@rm -f Makefile~
cp Makefile Makefile~
sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make
-for i in $(ALL_SRC); do echo $$i; \
$(CPP_DEPEND) $$i | \
sed -e 's+^\([^ ]*\.o\)+objects/\1+' >> tmp_make; done
mv tmp_make Makefile
# Run lint. Clean up the *.ln files that are sometimes left behind.
lint:
lint $(LINT_OPTIONS) $(LINT_CFLAGS) $(LINT_EXTRA) $(LINT_SRC)
-rm -f *.ln
# Check dosinst.c with lint.
lintinstall:
lint $(LINT_OPTIONS) -DWIN32 -DUNIX_LINT dosinst.c
-rm -f dosinst.ln
###########################################################################
.c.o:
$(CCC) $<
auto/if_perl.c: if_perl.xs
$(PERL) -e 'unless ( $$] >= 5.005 ) { for (qw(na defgv errgv)) { print "#define PL_$$_ $$_\n" }}' > $@
$(PERL) $(PERLLIB)/ExtUtils/xsubpp -prototypes -typemap \
$(PERLLIB)/ExtUtils/typemap if_perl.xs >> $@
auto/osdef.h: auto/config.h osdef.sh osdef1.h.in osdef2.h.in
CC="$(CC) $(OSDEF_CFLAGS)" srcdir=$(srcdir) sh $(srcdir)/osdef.sh
QUOTESED = sed -e 's/[\\"]/\\&/g' -e 's/\\"/"/' -e 's/\\";$$/";/'
auto/pathdef.c: Makefile auto/config.mk
-@echo creating $@
-@echo '/* pathdef.c */' > $@
-@echo '/* This file is automatically created by Makefile' >> $@
-@echo ' * DO NOT EDIT! Change Makefile only. */' >> $@
-@echo '#include "vim.h"' >> $@
-@echo 'char_u *default_vim_dir = (char_u *)"$(VIMRCLOC)";' | $(QUOTESED) >> $@
-@echo 'char_u *default_vimruntime_dir = (char_u *)"$(VIMRUNTIMEDIR)";' | $(QUOTESED) >> $@
-@echo 'char_u *all_cflags = (char_u *)"$(CC) -c -I$(srcdir) $(ALL_CFLAGS)";' | $(QUOTESED) >> $@
-@echo 'char_u *all_lflags = (char_u *)"$(CC) $(ALL_LIB_DIRS) $(LDFLAGS) -o $(VIMTARGET) $(ALL_LIBS) ";' | $(QUOTESED) >> $@
-@echo 'char_u *compiled_user = (char_u *)"' | tr -d $(NL) >> $@
-@if test -n "$(COMPILEDBY)"; then \
echo "$(COMPILEDBY)" | tr -d $(NL) >> $@; \
else ((logname) 2>/dev/null || whoami) | tr -d $(NL) >> $@; fi
-@echo '";' >> $@
-@echo 'char_u *compiled_sys = (char_u *)"' | tr -d $(NL) >> $@
-@if test -z "$(COMPILEDBY)"; then hostname | tr -d $(NL) >> $@; fi
-@echo '";' >> $@
-@sh $(srcdir)/pathdef.sh
# All the object files are put in the "objects" directory. Since not all make
# commands understand putting object files in another directory, it must be
# specified for each file separately.
objects:
mkdir objects
objects/buffer.o: buffer.c
$(CCC) -o $@ buffer.c
objects/charset.o: charset.c
$(CCC) -o $@ charset.c
objects/diff.o: diff.c
$(CCC) -o $@ diff.c
objects/digraph.o: digraph.c
$(CCC) -o $@ digraph.c
objects/edit.o: edit.c
$(CCC) -o $@ edit.c
objects/eval.o: eval.c
$(CCC) -o $@ eval.c
objects/ex_cmds.o: ex_cmds.c
$(CCC) -o $@ ex_cmds.c
objects/ex_cmds2.o: ex_cmds2.c
$(CCC) -o $@ ex_cmds2.c
objects/ex_docmd.o: ex_docmd.c
$(CCC) -o $@ ex_docmd.c
objects/ex_eval.o: ex_eval.c
$(CCC) -o $@ ex_eval.c
objects/ex_getln.o: ex_getln.c
$(CCC) -o $@ ex_getln.c
objects/fileio.o: fileio.c
$(CCC) -o $@ fileio.c
objects/fold.o: fold.c
$(CCC) -o $@ fold.c
objects/getchar.o: getchar.c
$(CCC) -o $@ getchar.c
objects/hardcopy.o: hardcopy.c
$(CCC) -o $@ hardcopy.c
objects/hashtab.o: hashtab.c
$(CCC) -o $@ hashtab.c
objects/gui.o: gui.c
$(CCC) -o $@ gui.c
objects/gui_at_fs.o: gui_at_fs.c
$(CCC) -o $@ gui_at_fs.c
objects/gui_at_sb.o: gui_at_sb.c
$(CCC) -o $@ gui_at_sb.c
objects/gui_athena.o: gui_athena.c
$(CCC) -o $@ gui_athena.c
objects/gui_beval.o: gui_beval.c
$(CCC) -o $@ gui_beval.c
objects/gui_gtk.o: gui_gtk.c
$(CCC) -o $@ gui_gtk.c
objects/gui_gtk_f.o: gui_gtk_f.c
$(CCC) -o $@ gui_gtk_f.c
objects/gui_gtk_x11.o: gui_gtk_x11.c
$(CCC) -o $@ gui_gtk_x11.c
objects/gui_motif.o: gui_motif.c
$(CCC) -o $@ gui_motif.c
objects/gui_xmdlg.o: gui_xmdlg.c
$(CCC) -o $@ gui_xmdlg.c
objects/gui_xmebw.o: gui_xmebw.c
$(CCC) -o $@ gui_xmebw.c
objects/gui_x11.o: gui_x11.c
$(CCC) -o $@ gui_x11.c
objects/gui_photon.o: gui_photon.c
$(CCC) -o $@ gui_photon.c
objects/gui_mac.o: gui_mac.c
$(CCC) -o $@ gui_mac.c
objects/hangulin.o: hangulin.c
$(CCC) -o $@ hangulin.c
objects/if_cscope.o: if_cscope.c
$(CCC) -o $@ if_cscope.c
objects/if_xcmdsrv.o: if_xcmdsrv.c
$(CCC) -o $@ if_xcmdsrv.c
objects/if_mzsch.o: if_mzsch.c
$(CCC) -o $@ if_mzsch.c
objects/if_perl.o: auto/if_perl.c
$(CCC) -o $@ auto/if_perl.c
objects/if_perlsfio.o: if_perlsfio.c
$(CCC) -o $@ if_perlsfio.c
objects/if_python.o: if_python.c
$(CCC) -o $@ if_python.c
objects/if_ruby.o: if_ruby.c
$(CCC) -o $@ if_ruby.c
objects/if_sniff.o: if_sniff.c
$(CCC) -o $@ if_sniff.c
objects/if_tcl.o: if_tcl.c
$(CCC) -o $@ if_tcl.c
objects/integration.o: integration.c
$(CCC) -o $@ integration.c
objects/main.o: main.c
$(CCC) -o $@ main.c
objects/mark.o: mark.c
$(CCC) -o $@ mark.c
objects/memfile.o: memfile.c
$(CCC) -o $@ memfile.c
objects/memline.o: memline.c
$(CCC) -o $@ memline.c
objects/menu.o: menu.c
$(CCC) -o $@ menu.c
objects/message.o: message.c
$(CCC) -o $@ message.c
objects/misc1.o: misc1.c
$(CCC) -o $@ misc1.c
objects/misc2.o: misc2.c
$(CCC) -o $@ misc2.c
objects/move.o: move.c
$(CCC) -o $@ move.c
objects/mbyte.o: mbyte.c
$(CCC) -o $@ mbyte.c
objects/normal.o: normal.c
$(CCC) -o $@ normal.c
objects/ops.o: ops.c
$(CCC) -o $@ ops.c
objects/option.o: option.c
$(CCC) -o $@ option.c
objects/os_beos.o: os_beos.c
$(CCC) -o $@ os_beos.c
objects/os_qnx.o: os_qnx.c
$(CCC) -o $@ os_qnx.c
objects/os_macosx.o: os_macosx.c
$(CCC) -o $@ os_macosx.c
objects/os_mac_conv.o: os_mac_conv.c
$(CCC) -o $@ os_mac_conv.c
objects/os_unix.o: os_unix.c
$(CCC) -o $@ os_unix.c
objects/pathdef.o: auto/pathdef.c
$(CCC) -o $@ auto/pathdef.c
objects/py_config.o: $(PYTHON_CONFDIR)/config.c
$(CCC) -o $@ $(PYTHON_CONFDIR)/config.c \
-I$(PYTHON_CONFDIR) -DHAVE_CONFIG_H -DNO_MAIN
objects/py_getpath.o: $(PYTHON_CONFDIR)/getpath.c
$(CCC) -o $@ $(PYTHON_CONFDIR)/getpath.c \
-I$(PYTHON_CONFDIR) -DHAVE_CONFIG_H -DNO_MAIN \
$(PYTHON_GETPATH_CFLAGS)
objects/pty.o: pty.c
$(CCC) -o $@ pty.c
objects/popupmnu.o: popupmnu.c
$(CCC) -o $@ popupmnu.c
objects/quickfix.o: quickfix.c
$(CCC) -o $@ quickfix.c
objects/regexp.o: regexp.c
$(CCC) -o $@ regexp.c
objects/screen.o: screen.c
$(CCC) -o $@ screen.c
objects/search.o: search.c
$(CCC) -o $@ search.c
objects/spell.o: spell.c
$(CCC) -o $@ spell.c
objects/syntax.o: syntax.c
$(CCC) -o $@ syntax.c
objects/tag.o: tag.c
$(CCC) -o $@ tag.c
objects/term.o: term.c
$(CCC) -o $@ term.c
objects/ui.o: ui.c
$(CCC) -o $@ ui.c
objects/undo.o: undo.c
$(CCC) -o $@ undo.c
objects/window.o: window.c
$(CCC) -o $@ window.c
objects/workshop.o: workshop.c
$(CCC) -o $@ workshop.c
objects/wsdebug.o: wsdebug.c
$(CCC) -o $@ wsdebug.c
objects/netbeans.o: netbeans.c
$(CCC) -o $@ netbeans.c
Makefile:
@echo The name of the makefile MUST be "Makefile" (with capital M)!!!!
###############################################################################
### MacOS X installation
###
### This installs a runnable Vim.app in $(prefix)
REZ = /Developer/Tools/Rez
RESDIR = $(APPDIR)/Contents/Resources
VERSION = $(VIMMAJOR).$(VIMMINOR)
### Common flags
M4FLAGSX = $(M4FLAGS) -DAPP_EXE=$(VIMNAME) -DAPP_NAME=$(VIMNAME) \
-DAPP_VER=$(VERSION)
install_macosx: gui_bundle
# Remove the link to the runtime dir, don't want to copy all of that.
-rm $(RESDIR)/vim/runtime
$(INSTALL_DATA_R) $(APPDIR) $(DESTDIR)$(prefix)
# Generate the help tags file now, it won't work with "make installruntime".
-@srcdir=`pwd`; cd $(HELPSOURCE); $(MAKE) VIMEXE=$$srcdir/$(VIMTARGET) vimtags
# Install the runtime files. Recursive!
-mkdir -p $(DESTDIR)$(prefix)/$(RESDIR)/vim/runtime
# -mkdir $(DESTDIR)$(prefix)/$(APPDIR)/bin
srcdir=`pwd`; $(MAKE) -f Makefile installruntime \
VIMEXE=$$srcdir/$(VIMTARGET) \
prefix=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR) \
exec_prefix=$(DESTDIR)$(prefix)/$(APPDIR)/Contents \
BINDIR=$(DESTDIR)$(prefix)/$(APPDIR)/Contents/MacOS \
VIMLOC=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR) \
VIMRTLOC=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR)/runtime
# Put the link back.
ln -s `pwd`/../runtime $(RESDIR)/vim
# Copy rgb.txt, Mac doesn't always have X11
$(INSTALL_DATA) $(SCRIPTSOURCE)/rgb.txt $(DESTDIR)$(prefix)/$(RESDIR)/vim/runtime
# TODO: Create the vimtutor application.
gui_bundle: $(RESDIR) bundle-dir bundle-executable bundle-info bundle-resource \
bundle-language
$(RESDIR):
mkdir -p $@
bundle-dir: $(APPDIR)/Contents $(VIMTARGET)
# Make a link to the runtime directory, so that we can try out the executable
# without installing it.
mkdir -p $(RESDIR)/vim
-ln -s `pwd`/../runtime $(RESDIR)/vim
bundle-executable: $(VIMTARGET)
mkdir -p $(APPDIR)/Contents/MacOS
cp $(VIMTARGET) $(APPDIR)/Contents/MacOS/$(VIMTARGET)
bundle-info: bundle-dir
@echo "Creating PkgInfo"
@echo -n "APPLVIM!" > $(APPDIR)/Contents/PkgInfo
@echo "Creating Info.plist"
m4 $(M4FLAGSX) infplist.xml > $(APPDIR)/Contents/Info.plist
bundle-resource: bundle-dir bundle-rsrc
cp -f $(RSRC_DIR)/*.icns $(RESDIR)
### Classic resources
# Resource fork (in the form of a .rsrc file) for Classic Vim (Mac OS 9)
# This file is also required for OS X Vim.
bundle-rsrc: os_mac.rsr.hqx
@echo "Creating resource fork"
python dehqx.py $<
rm -f gui_mac.rsrc
mv gui_mac.rsrc.rsrcfork $(RESDIR)/$(VIMNAME).rsrc
# po/Make_osx.pl says something about generating a Mac message file
# for Ukrananian. Would somebody using Mac OS X in Ukranian
# *really* be upset that Carbon Vim was not localised in
# Ukranian?
#
#bundle-language: bundle-dir po/Make_osx.pl
# cd po && perl Make_osx.pl --outdir ../$(RESDIR) $(MULTILANG)
bundle-language: bundle-dir
$(APPDIR)/Contents:
-$(SHELL) ./mkinstalldirs $(APPDIR)/Contents/MacOS
-$(SHELL) ./mkinstalldirs $(RESDIR)/English.lproj
###############################################################################
### (automatically generated by 'make depend')
### Dependencies:
objects/buffer.o: buffer.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
arabic.h version.h
objects/charset.o: charset.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
arabic.h
objects/diff.o: diff.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
arabic.h
objects/digraph.o: digraph.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
arabic.h
objects/edit.o: edit.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
arabic.h
objects/eval.o: eval.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
arabic.h version.h
objects/ex_cmds.o: ex_cmds.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
arabic.h version.h
objects/ex_cmds2.o: ex_cmds2.c vim.h auto/config.h feature.h os_unix.h \
auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
globals.h farsi.h arabic.h version.h
objects/ex_docmd.o: ex_docmd.c vim.h auto/config.h feature.h os_unix.h \
auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
globals.h farsi.h arabic.h
objects/ex_eval.o: ex_eval.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
arabic.h
objects/ex_getln.o: ex_getln.c vim.h auto/config.h feature.h os_unix.h \
auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
globals.h farsi.h arabic.h
objects/fileio.o: fileio.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
arabic.h
objects/fold.o: fold.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
arabic.h
objects/getchar.o: getchar.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
arabic.h
objects/hardcopy.o: hardcopy.c vim.h auto/config.h feature.h os_unix.h \
auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
globals.h farsi.h arabic.h version.h
objects/hashtab.o: hashtab.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
arabic.h
objects/if_cscope.o: if_cscope.c vim.h auto/config.h feature.h os_unix.h \
auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
globals.h farsi.h arabic.h if_cscope.h
objects/if_xcmdsrv.o: if_xcmdsrv.c vim.h auto/config.h feature.h os_unix.h \
auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
globals.h farsi.h arabic.h version.h
objects/main.o: main.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
arabic.h farsi.c arabic.c
objects/mark.o: mark.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
arabic.h
objects/memfile.o: memfile.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
arabic.h
objects/memline.o: memline.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
arabic.h
objects/menu.o: menu.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
arabic.h
objects/message.o: message.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
arabic.h
objects/misc1.o: misc1.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
arabic.h version.h
objects/misc2.o: misc2.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
arabic.h
objects/move.o: move.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
arabic.h
objects/mbyte.o: mbyte.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
arabic.h
objects/normal.o: normal.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
arabic.h
objects/ops.o: ops.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \
keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \
proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h
objects/option.o: option.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
arabic.h
objects/os_unix.o: os_unix.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
arabic.h if_mzsch.h os_unixx.h
objects/pathdef.o: auto/pathdef.c ./vim.h ./auto/config.h ./feature.h ./os_unix.h \
./auto/osdef.h ./ascii.h ./keymap.h ./term.h ./macros.h ./option.h \
./structs.h ./regexp.h ./gui.h ./gui_beval.h proto/gui_beval.pro \
./ex_cmds.h ./proto.h ./globals.h ./farsi.h ./arabic.h
objects/popupmnu.o: popupmnu.c vim.h auto/config.h feature.h os_unix.h \
auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
globals.h farsi.h arabic.h
objects/quickfix.o: quickfix.c vim.h auto/config.h feature.h os_unix.h \
auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
globals.h farsi.h arabic.h
objects/regexp.o: regexp.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
arabic.h
objects/screen.o: screen.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
arabic.h
objects/search.o: search.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
arabic.h
objects/spell.o: spell.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
arabic.h
objects/syntax.o: syntax.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
arabic.h
objects/tag.o: tag.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \
keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \
proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h
objects/term.o: term.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
arabic.h
objects/ui.o: ui.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \
keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \
proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h
objects/undo.o: undo.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
arabic.h
objects/version.o: version.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
arabic.h version.h
objects/window.o: window.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
arabic.h
objects/gui.o: gui.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \
keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \
proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h
objects/gui_gtk.o: gui_gtk.c gui_gtk_f.h vim.h auto/config.h feature.h os_unix.h \
auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
globals.h farsi.h arabic.h ../pixmaps/stock_icons.h
objects/gui_gtk_f.o: gui_gtk_f.c vim.h auto/config.h feature.h os_unix.h \
auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
globals.h farsi.h arabic.h gui_gtk_f.h
objects/gui_motif.o: gui_motif.c vim.h auto/config.h feature.h os_unix.h \
auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
globals.h farsi.h arabic.h gui_xmebw.h ../pixmaps/alert.xpm \
../pixmaps/error.xpm ../pixmaps/generic.xpm ../pixmaps/info.xpm \
../pixmaps/quest.xpm gui_x11_pm.h ../pixmaps/tb_new.xpm \
../pixmaps/tb_open.xpm ../pixmaps/tb_close.xpm ../pixmaps/tb_save.xpm \
../pixmaps/tb_print.xpm ../pixmaps/tb_cut.xpm ../pixmaps/tb_copy.xpm \
../pixmaps/tb_paste.xpm ../pixmaps/tb_find.xpm \
../pixmaps/tb_find_next.xpm ../pixmaps/tb_find_prev.xpm \
../pixmaps/tb_find_help.xpm ../pixmaps/tb_exit.xpm \
../pixmaps/tb_undo.xpm ../pixmaps/tb_redo.xpm ../pixmaps/tb_help.xpm \
../pixmaps/tb_macro.xpm ../pixmaps/tb_make.xpm \
../pixmaps/tb_save_all.xpm ../pixmaps/tb_jump.xpm \
../pixmaps/tb_ctags.xpm ../pixmaps/tb_load_session.xpm \
../pixmaps/tb_save_session.xpm ../pixmaps/tb_new_session.xpm \
../pixmaps/tb_blank.xpm ../pixmaps/tb_maximize.xpm \
../pixmaps/tb_split.xpm ../pixmaps/tb_minimize.xpm \
../pixmaps/tb_shell.xpm ../pixmaps/tb_replace.xpm \
../pixmaps/tb_vsplit.xpm ../pixmaps/tb_maxwidth.xpm \
../pixmaps/tb_minwidth.xpm
objects/gui_xmdlg.o: gui_xmdlg.c vim.h auto/config.h feature.h os_unix.h \
auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
globals.h farsi.h arabic.h
objects/gui_xmebw.o: gui_xmebw.c vim.h auto/config.h feature.h os_unix.h \
auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
globals.h farsi.h arabic.h gui_xmebwp.h gui_xmebw.h
objects/gui_athena.o: gui_athena.c vim.h auto/config.h feature.h os_unix.h \
auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
globals.h farsi.h arabic.h gui_at_sb.h gui_x11_pm.h \
../pixmaps/tb_new.xpm ../pixmaps/tb_open.xpm ../pixmaps/tb_close.xpm \
../pixmaps/tb_save.xpm ../pixmaps/tb_print.xpm ../pixmaps/tb_cut.xpm \
../pixmaps/tb_copy.xpm ../pixmaps/tb_paste.xpm ../pixmaps/tb_find.xpm \
../pixmaps/tb_find_next.xpm ../pixmaps/tb_find_prev.xpm \
../pixmaps/tb_find_help.xpm ../pixmaps/tb_exit.xpm \
../pixmaps/tb_undo.xpm ../pixmaps/tb_redo.xpm ../pixmaps/tb_help.xpm \
../pixmaps/tb_macro.xpm ../pixmaps/tb_make.xpm \
../pixmaps/tb_save_all.xpm ../pixmaps/tb_jump.xpm \
../pixmaps/tb_ctags.xpm ../pixmaps/tb_load_session.xpm \
../pixmaps/tb_save_session.xpm ../pixmaps/tb_new_session.xpm \
../pixmaps/tb_blank.xpm ../pixmaps/tb_maximize.xpm \
../pixmaps/tb_split.xpm ../pixmaps/tb_minimize.xpm \
../pixmaps/tb_shell.xpm ../pixmaps/tb_replace.xpm \
../pixmaps/tb_vsplit.xpm ../pixmaps/tb_maxwidth.xpm \
../pixmaps/tb_minwidth.xpm
objects/gui_gtk_x11.o: gui_gtk_x11.c vim.h auto/config.h feature.h os_unix.h \
auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
globals.h farsi.h arabic.h gui_gtk_f.h ../runtime/vim32x32.xpm \
../runtime/vim16x16.xpm ../runtime/vim48x48.xpm
objects/gui_x11.o: gui_x11.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
arabic.h ../runtime/vim32x32.xpm ../runtime/vim16x16.xpm \
../runtime/vim48x48.xpm
objects/gui_at_sb.o: gui_at_sb.c vim.h auto/config.h feature.h os_unix.h \
auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
globals.h farsi.h arabic.h gui_at_sb.h
objects/gui_at_fs.o: gui_at_fs.c vim.h auto/config.h feature.h os_unix.h \
auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
globals.h farsi.h arabic.h gui_at_sb.h
objects/pty.o: pty.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \
keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \
proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h
objects/hangulin.o: hangulin.c vim.h auto/config.h feature.h os_unix.h \
auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
globals.h farsi.h arabic.h
objects/if_mzsch.o: if_mzsch.c vim.h auto/config.h feature.h os_unix.h \
auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
globals.h farsi.h arabic.h if_mzsch.h
objects/if_perl.o: auto/if_perl.c ./vim.h ./auto/config.h ./feature.h ./os_unix.h \
./auto/osdef.h ./ascii.h ./keymap.h ./term.h ./macros.h ./option.h \
./structs.h ./regexp.h ./gui.h ./gui_beval.h proto/gui_beval.pro \
./ex_cmds.h ./proto.h ./globals.h ./farsi.h ./arabic.h
objects/if_perlsfio.o: if_perlsfio.c vim.h auto/config.h feature.h os_unix.h \
auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
globals.h farsi.h arabic.h
objects/if_python.o: if_python.c vim.h auto/config.h feature.h os_unix.h \
auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
globals.h farsi.h arabic.h
objects/if_tcl.o: if_tcl.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
arabic.h
objects/if_ruby.o: if_ruby.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
arabic.h version.h
objects/if_sniff.o: if_sniff.c vim.h auto/config.h feature.h os_unix.h \
auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
globals.h farsi.h arabic.h os_unixx.h
objects/gui_beval.o: gui_beval.c vim.h auto/config.h feature.h os_unix.h \
auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
globals.h farsi.h arabic.h
objects/workshop.o: workshop.c auto/config.h integration.h vim.h feature.h \
os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h \
structs.h regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h \
proto.h globals.h farsi.h arabic.h version.h workshop.h
objects/wsdebug.o: wsdebug.c
objects/integration.o: integration.c vim.h auto/config.h feature.h os_unix.h \
auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
globals.h farsi.h arabic.h integration.h
objects/netbeans.o: netbeans.c vim.h auto/config.h feature.h os_unix.h \
auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
globals.h farsi.h arabic.h version.h
Jump to Line
Something went wrong with that request. Please try again.