Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with HTTPS or Subversion.

Download ZIP
Newer
Older
100644 17 lines (13 sloc) 1.155 kb
021cf6c @bafe first version
authored
1 Simple multichannel POCSAG receiver, to be used with osmo-pocsag (https://github.com/smunaut/osmo-pocsag)
2 The script decode-streams automatically starts 4 istances of the pocsag decoder (whose executable should be in the same folder as the script)
16e4aa0 @bafe modified: README
authored
3 In alternative, you can specify the four fifos in the grc file and decode them using your own decoder/osmo-pocsag
021cf6c @bafe first version
authored
4 I absolutely do not guarantee that this decoder will work.
5 The center frequencies correspond to the 4 swiss POCSAG channels, you need to change it to those of your country.
e163f19 @bafe New README File, GUI Fixed
authored
6
7 Tab 1 shows the RF spectrum around cf.
8 Tab 2 shows the baseband spectrum around cf+fine, set fine to some freq. higher than 100 khz to avoid the spikes around dc.
9 Tab 3 shows the "audio" output for a single channel, the channel is set in "baseband_fft".
10 The four channels to be monitored are set in the variable "channels", directly input the exact frequency you find in any list,
11 python will compute the xlator parameters for your :).
12 Filter offest may be used to widen the filter after the channel xlator up to 6kHz.
13 rate_1 to rate_4 are used to set the data rates for the four channels.
14 Have fun decoding POCSAG!
15
16
Something went wrong with that request. Please try again.