A1 / A1Mini - light off as default.

[NVNDO]

Problem: It's hugely annoying having to manually switch off the light every time one starts the printer.

Solution: Implement an option to switch off the light permanently.

Alternative: In addition to the existing Light on/off button, add
Light on startup on/off function.

[wsantos]

@NVNDO in the meantime I think you can do it here:

[NVNDO]

@NVNDO in the meantime I think you can do it here:

...and on the printer itself and app. But still, it's switching the printers on - and having to switch off each printers light manually. I have 2 right now but I'm planning on more in a near future, and I'm not willing to do this every day.

Nor do other people.. the community forum has many people complaining about this,

[ArnieO]

I totally agree, this should be a parameter that could be set to the opposite default setting somewhere in Bambu Studio.

[LTB3D]

Same issue here. It's so annoying!

[Alpha12o]

Same, but in my case with A1. Every time I start a print I have to open the app or toggle the light off on the printer touchscreen.
I would like for it to be a setting you can enable/disable, like the sound. IMHO, the default behavior should be printing with light off and if you want, you open the app or use the printer touchscreen to switch the light on.

[NVNDO]

Same, but in my case with A1. Every time I start a print I have to open the app or toggle the light off on the printer touchscreen. I would like for it to be a setting you can enable/disable, like the sound. IMHO, the default behavior should be printing with light off and if you want, you open the app or use the printer touchscreen to switch the light on.

Hey @Alpha12o , I didn't know this was also a thing on the A1s, therefore I changed the title to extend this petition.
thx for joining!

[ArnieO]

I didn't know this was also a thing on the A1s

I confirm: Same issue on A1. Which is why I think this should be an option in Bambu Studio (light ON or OFF), when sending the job to the printer.

[GenericArt]

I also would like to see the ability to permanently turn off the light as it is super annoying to do it every print.

[Malrikgus]

Upvoted

[Jacques44]

Hello, upvote !

[jonathanoeijoeng]

Currently I use beta firmware on A1 mini and realized that it does not turn on light every print.

[ArnieO]

Currently I use beta firmware on A1 mini and realized that it does not turn on light every print.

Where is the beta firmware available?

[jonathanoeijoeng]

You need to enable beta firmware on bambu handy apps first.

…

On Sat, May 25, 2024, 18:09 ArnieO ***@***.***> wrote: Currently I use beta firmware on A1 mini and realized that it does not turn on light every print. Where is the beta firmware available? — Reply to this email directly, view it on GitHub <#3997 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ABVYLIDAFCQPOYB2S3LWZ2LZEBWM5AVCNFSM6AAAAABHEVTK4CVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCMZRGIYTMNBZGM> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

[NVNDO]

@jonathanoeijoeng and then..? Where does one get the firmware from? In the App it says, " You joined the beta-program" but from what I could read beforehand, one must be accepted first to be able to use it.

Actual firmware: -- (no version listed)

Do they send a confirmation like "You've been accepted"?
Does it downloads automatically, or does one have to do it manually?

Thx in advance

[jonathanoeijoeng]

I didnt get any confirmation but need to wait a couple of days before new beta firmware showed up in the printer.

…

On Sat, May 25, 2024, 20:15 NVNDO ***@***.***> wrote: @jonathanoeijoeng <https://github.com/jonathanoeijoeng> and then..? Where does one get the firmware from? In the App it says, " You joined the beta-program" but from what I could read beforehand, one must be accepted first to be able to use the beta. Do they send a confirmation like "You've been accepted"? Does it downloads automatically, does one have to do it manually? — Reply to this email directly, view it on GitHub <#3997 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ABVYLIGVDRA2QZXQX5RUJJ3ZECFHDAVCNFSM6AAAAABHEVTK4CVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCMZRGI3DIMZWGQ> . You are receiving this because you were mentioned.Message ID: ***@***.***>

[MarcoQ3D]

Good evening, thanks for this post. I would also prefer to have the option to choose the light off when the A1 starts. I follow

[Alpha12o]

I also signed up for the beta firmware program.
I guess we'll have to wait for a new beta update