UHD Warning:
    Unable to set the thread priority. Performance may be negatively affected.
    Please see the general application notes in the manual for instructions.
    EnvironmentError: OSError: error in pthread_setschedparam
S  _____________________________________________________
 /
|       Device: USRP2 / N-Series Device
|     _____________________________________________________
|    /
|   |       Mboard: N210
|   |   hardware: 2561
|   |   mac-addr: a0:36:fa:25:33:c9
|   |   ip-addr: 192.168.10.3
|   |   subnet: 255.255.255.255
|   |   gateway: 255.255.255.255
|   |   gpsdo: none
|   |   serial: ECR13W9UP
|   |   name: usrp33c9-ph
|   |   FW Version: 12.4
|   |   FPGA Version: 11.1
|   |   
|   |   Time sources:  none, external, _external_, mimo
|   |   Clock sources: internal, external, mimo
|   |   Sensors: mimo_locked, ref_locked
|   |     _____________________________________________________
|   |    /
|   |   |       RX DSP: 0
|   |   |   
|   |   |   Freq range: -50.000 to 50.000 MHz
|   |     _____________________________________________________
|   |    /
|   |   |       RX DSP: 1
|   |   |   
|   |   |   Freq range: -50.000 to 50.000 MHz
|   |     _____________________________________________________
|   |    /
|   |   |       RX Dboard: A
|   |   |   ID: XCVR2450, XCVR2450 - r2.1 (0x0061)
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       RX Frontend: 0
|   |   |   |   Name: XCVR2450 RX
|   |   |   |   Antennas: J1, J2
|   |   |   |   Sensors: lo_locked, rssi
|   |   |   |   Freq range: 2400.000 to 6000.000 MHz
|   |   |   |   Gain range LNA: 0.0 to 30.5 step 15.0 dB
|   |   |   |   Gain range VGA: 0.0 to 62.0 step 2.0 dB
|   |   |   |   Bandwidth range: 13500000.0 to 39600000.0 step 600000.0 Hz
|   |   |   |   Connection Type: IQ
|   |   |   |   Uses LO offset: No
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       RX Codec: A
|   |   |   |   Name: ads62p44
|   |   |   |   Gain range digital: 0.0 to 6.0 step 0.5 dB
|   |   |   |   Gain range fine: 0.0 to 0.5 step 0.1 dB
|   |     _____________________________________________________
|   |    /
|   |   |       TX DSP: 0
|   |   |   
|   |   |   Freq range: -50.000 to 50.000 MHz
|   |     _____________________________________________________
|   |    /
|   |   |       TX Dboard: A
|   |   |   ID: XCVR2450 (0x0060)
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       TX Frontend: 0
|   |   |   |   Name: XCVR2450 TX
|   |   |   |   Antennas: J1, J2
|   |   |   |   Sensors: lo_locked
|   |   |   |   Freq range: 2400.000 to 6000.000 MHz
|   |   |   |   Gain range VGA: 0.0 to 30.0 step 0.5 dB
|   |   |   |   Gain range BB: 0.0 to 5.0 step 1.5 dB
|   |   |   |   Bandwidth range: 24000000.0 to 48000000.0 step 12000000.0 Hz
|   |   |   |   Connection Type: QI
|   |   |   |   Uses LO offset: No
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       TX Codec: A
|   |   |   |   Name: ad9777
|   |   |   |   Gain Elements: None