[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.59+ (root@build2) (gcc version 4.9.3 20150311 (prerelease) (crosstool-NG 1.20.0) ) #24922 SMP PREEMPT Tue Jan 14 15:20:58 CST 2020 [ 0.000000] Command line: root=/dev/md0 ihd_num=0 netif_num=4 syno_hw_version=DS1819+ vender_format_version=2 ahci_remap=0>0:1>1:5>2:4>3:3>4:9>5:8>6:7>7:6>8:2>9 opt_pci_slot=000000090 syno_usb_vbus_gpio=18@0000:00:15.0@2@1,2@0000:00:15.0@3@1,19@syno.ext.hub@1@0,20@syno.ext.hub@2@0,21@syno.ext.hub@3@0 synoboot2 sn=19B0R5R1M4HY9 macs=001132c08c5d,001132c08c5e,001132c08c5f,001132c08c60 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] x86/fpu: xstate_offset[3]: 960, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 1024, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x08: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x10: 'MPX CSR' [ 0.000000] x86/fpu: Enabled xstate features 0x1b, context size is 1088 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000005efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000005f000-0x000000000005ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000060000-0x0000000000087fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000078240fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000078241000-0x0000000078440fff] type 20 [ 0.000000] BIOS-e820: [mem 0x0000000078441000-0x000000007ebbefff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007ebbf000-0x000000007efbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007efbf000-0x000000007effefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007efff000-0x000000007effffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec80000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed17fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.40 by INSYDE Corp. [ 0.000000] efi: SMBIOS=0x784a4000 ESRT=0x78533418 ACPI 2.0=0x7effe014 [ 0.000000] esrt: Reserving ESRT space from 0x0000000078533418 to 0x0000000078533450. [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Synology Inc. DS1819+/Type2 - Board Product Name1, BIOS M.407 2019/01/25 [ 0.000000] Kernel/User page tables isolation: disabled [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E7FFF write-protect [ 0.000000] E8000-EFFFF write-combining [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00FF800000 mask 7FFF800000 write-protect [ 0.000000] 1 base 0000000000 mask 7F80000000 write-back [ 0.000000] 2 base 007F000000 mask 7FFF000000 uncachable [ 0.000000] 3 base 0100000000 mask 7F80000000 write-back [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC [ 0.000000] x2apic: enabled by BIOS, switching to x2apic ops [ 0.000000] e820: last_pfn = 0x7f000 max_arch_pfn = 0x400000000 [ 0.000000] Base memory trampoline at [ffff88000007c000] 7c000 size 28672 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x01a07000, 0x01a07fff] PGTABLE [ 0.000000] BRK [0x01a08000, 0x01a08fff] PGTABLE [ 0.000000] BRK [0x01a09000, 0x01a09fff] PGTABLE [ 0.000000] BRK [0x01a0a000, 0x01a0afff] PGTABLE [ 0.000000] RAMDISK: [mem 0x37441000-0x37a17fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x000000007EFFE014 000024 (v02 INSYDE) [ 0.000000] ACPI: XSDT 0x000000007EFFE120 0000AC (v01 INSYDE DNV 00000001 01000013) [ 0.000000] ACPI: FACP 0x000000007EFF9000 00010C (v05 INSYDE DNV 00000001 ACPI 00040000) [ 0.000000] ACPI: DSDT 0x000000007EFF0000 004A06 (v02 INSYDE DNV 00000000 ACPI 00040000) [ 0.000000] ACPI: FACS 0x000000007EFBD000 000040 [ 0.000000] ACPI: UEFI 0x000000007EFFD000 000236 (v01 INSYDE DNV 00000001 ACPI 00040000) [ 0.000000] ACPI: UEFI 0x000000007EFFC000 000042 (v01 INSYDE DNV 00000000 ACPI 00040000) [ 0.000000] ACPI: BDAT 0x000000007EFFB000 000030 (v01 INSYDE DNV 00000000 ACPI 00040000) [ 0.000000] ACPI: BOOT 0x000000007EFFA000 000028 (v01 INSYDE DNV 00000001 ACPI 00040000) [ 0.000000] ACPI: HPET 0x000000007EFF8000 000038 (v01 INSYDE DNV 00000001 ACPI 00040000) [ 0.000000] ACPI: APIC 0x000000007EFF7000 0000D2 (v03 INSYDE DNV 00000001 ACPI 00040000) [ 0.000000] ACPI: MCFG 0x000000007EFF6000 00003C (v01 INSYDE DNV 00000001 ACPI 00040000) [ 0.000000] ACPI: WDAT 0x000000007EFF5000 0001C4 (v01 INSYDE DNV 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x000000007EFED000 001901 (v02 INSYDE DNV 00003000 ACPI 00040000) [ 0.000000] ACPI: DMAR 0x000000007EFEC000 000070 (v01 INSYDE DNV 00000001 ACPI 00040000) [ 0.000000] ACPI: DBG2 0x000000007EFEB000 000061 (v00 INSYDE DNV 00000000 ACPI 00040000) [ 0.000000] ACPI: HEST 0x000000007EFEA000 0000A8 (v01 INSYDE DNV 00000001 ACPI 00040000) [ 0.000000] ACPI: ERST 0x000000007EFE9000 000230 (v01 INSYDE DNV 00000001 ACPI 00040000) [ 0.000000] ACPI: BERT 0x000000007EFE8000 000030 (v01 INSYDE DNV 00000001 ACPI 00040000) [ 0.000000] ACPI: EINJ 0x000000007EFE7000 000030 (v01 INSYDE DNV 00000001 ACPI 00040000) [ 0.000000] ACPI: BGRT 0x000000007EFE6000 000038 (v01 INSYDE DNV 00000001 ACPI 00040000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Setting APIC routing to cluster x2apic. [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000017fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000005efff] [ 0.000000] node 0: [mem 0x0000000000060000-0x0000000000087fff] [ 0.000000] node 0: [mem 0x0000000000100000-0x0000000078240fff] [ 0.000000] node 0: [mem 0x000000007efff000-0x000000007effffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000017fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff] [ 0.000000] On node 0 totalpages: 1016264 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 23 pages reserved [ 0.000000] DMA zone: 3974 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7626 pages used for memmap [ 0.000000] DMA32 zone: 488002 pages, LIFO batch:31 [ 0.000000] Normal zone: 8192 pages used for memmap [ 0.000000] Normal zone: 524288 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a001 base: 0xfed00000 [ 0.000000] smpboot: Allowing 16 CPUs, 12 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0005f000-0x0005ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x00088000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x78241000-0x78440fff] [ 0.000000] PM: Registered nosave memory: [mem 0x78441000-0x7ebbefff] [ 0.000000] PM: Registered nosave memory: [mem 0x7ebbf000-0x7efbefff] [ 0.000000] PM: Registered nosave memory: [mem 0x7efbf000-0x7effefff] [ 0.000000] PM: Registered nosave memory: [mem 0x7f000000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfcffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfd000000-0xfe7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe800000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec80000-0xfed00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed17fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed83fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed85000-0xff7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff] [ 0.000000] e820: [mem 0x7f000000-0xdfffffff] available for PCI devices [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88017fc00000 s87448 r8192 d31336 u131072 [ 0.000000] pcpu-alloc: s87448 r8192 d31336 u131072 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1000359 [ 0.000000] Kernel command line: root=/dev/md0 ihd_num=0 netif_num=4 syno_hw_version=DS1819+ vender_format_version=2 ahci_remap=0>0:1>1:5>2:4>3:3>4:9>5:8>6:7>7:6>8:2>9 opt_pci_slot=000000090 syno_usb_vbus_gpio=18@0000:00:15.0@2@1,2@0000:00:15.0@3@1,19@syno.ext.hub@1@0,20@syno.ext.hub@2@0,21@syno.ext.hub@3@0 synoboot2 sn=19B0R5R1M4HY9 macs=001132c08c5d,001132c08c5e,001132c08c5f,001132c08c60 [ 0.000000] Internal HD num: 0 [ 0.000000] Internal netif num: 4 [ 0.000000] Synology Hardware Version: DS1819+ [ 0.000000] Vender format version: 2 [ 0.000000] SYNO: ahci remap initialized [ 0.000000] Syno Bootargs : opt_pci_slot initialized [ 0.000000] USB Vbus GPIO Control: [ 0.000000] Gpp#18 - Host: 0000:00:15.0 - Port:2 - Polarity: ACTIVE_HIGH [ 0.000000] Gpp#2 - Host: 0000:00:15.0 - Port:3 - Polarity: ACTIVE_HIGH [ 0.000000] Gpp#19 - Host: syno.ext.hub - Port:1 - Polarity: ACTIVE_LOW [ 0.000000] Gpp#20 - Host: syno.ext.hub - Port:2 - Polarity: ACTIVE_LOW [ 0.000000] Gpp#21 - Host: syno.ext.hub - Port:3 - Polarity: ACTIVE_LOW [ 0.000000] Serial Number: 19B0R5R1M4HY9 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3867084K/4065056K available (5518K kernel code, 476K rwdata, 1816K rodata, 864K init, 692K bss, 197972K reserved, 0K cma-reserved) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] NR_IRQS:4352 nr_irqs:2184 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [ttyS0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: PIT calibration matches HPET. 1 loops [ 0.000000] tsc: Detected 2099.999 MHz processor [ 0.000007] Calibrating delay loop (skipped), value calculated using timer frequency.. 4199.99 BogoMIPS (lpj=2099999) [ 0.010917] pid_max: default: 32768 minimum: 301 [ 0.015689] ACPI: Core revision 20150930 [ 0.025383] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.035308] Security Framework initialized [ 0.039560] AppArmor: AppArmor initialized [ 0.043826] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.050671] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.058246] Initializing cgroup subsys io [ 0.062406] Initializing cgroup subsys memory [ 0.066916] Initializing cgroup subsys devices [ 0.071505] Initializing cgroup subsys freezer [ 0.076125] CPU: Physical Processor ID: 0 [ 0.080279] CPU: Processor Core ID: 2 [ 0.090990] mce: CPU supports 9 MCE banks [ 0.095203] CPU0: Thermal monitoring enabled (TM1) [ 0.100166] process: using mwait in idle threads [ 0.104929] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0 [ 0.110469] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.116535] Spectre V2 : Vulnerable: Minimal generic ASM retpoline [ 0.122856] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.131273] Speculative Store Bypass: Vulnerable [ 0.137798] Freeing SMP alternatives memory: 28K (ffffffff81951000 - ffffffff81958000) [ 0.147677] DMAR: Host address width 39 [ 0.151663] DMAR: DRHD base: 0x000000fed90000 flags: 0x1 [ 0.157128] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.165189] DMAR: RMRR base: 0x0000007ab60000 end: 0x0000007ab7ffff [ 0.171601] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0 [ 0.178102] DMAR-IR: HPET id 0 under DRHD base 0xfed90000 [ 0.183644] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.193359] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.201206] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.217361] TSC deadline timer enabled [ 0.217368] smpboot: CPU0: Intel(R) Atom(TM) CPU C3538 @ 2.10GHz (family: 0x6, model: 0x5f, stepping: 0x1) [ 0.227624] Performance Events: PEBS fmt3+, generic architected perfmon, full-width counters, Intel PMU driver. [ 0.238434] ... version: 4 [ 0.242577] ... bit width: 48 [ 0.246805] ... generic registers: 4 [ 0.250945] ... value mask: 0000ffffffffffff [ 0.256387] ... max period: 00007fffffffffff [ 0.261829] ... fixed-purpose events: 3 [ 0.265971] ... event mask: 000000070000000f [ 0.280482] x86: Booting SMP configuration: [ 0.284805] .... node #0, CPUs: #1 [ 0.298393] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.309910] #2 #3 [ 0.333230] x86: Booted up 1 node, 4 CPUs [ 0.337698] smpboot: Total of 4 processors activated (16799.99 BogoMIPS) [ 0.347527] devtmpfs: initialized [ 0.351388] PM: Registering ACPI NVS region [mem 0x7ebbf000-0x7efbefff] (4194304 bytes) [ 0.359757] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.369648] futex hash table entries: 4096 (order: 6, 262144 bytes) [ 0.376227] xor: measuring software checksum speed [ 0.391172] prefetch64-sse: 10508.000 MB/sec [ 0.405854] generic_sse: 9028.000 MB/sec [ 0.410256] xor: using function: prefetch64-sse (10508.000 MB/sec) [ 0.416651] pinctrl core: initialized pinctrl subsystem [ 0.422268] NET: Registered protocol family 16 [ 0.433868] cpuidle: using governor ladder [ 0.444117] cpuidle: using governor menu [ 0.448251] Simple Boot Flag at 0x44 set to 0x1 [ 0.452956] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.460662] ACPI: bus type PCI registered [ 0.464907] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.474349] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.481681] PCI: Using configuration type 1 for base access [ 0.514472] raid6: sse2x1 gen() 3792 MB/s [ 0.535916] raid6: sse2x1 xor() 2406 MB/s [ 0.557363] raid6: sse2x2 gen() 4539 MB/s [ 0.578798] raid6: sse2x2 xor() 2902 MB/s [ 0.600243] raid6: sse2x4 gen() 4925 MB/s [ 0.621683] raid6: sse2x4 xor() 2718 MB/s [ 0.626085] raid6: using algorithm sse2x4 gen() 4925 MB/s [ 0.631613] raid6: .... xor() 2718 MB/s, rmw enabled [ 0.636710] raid6: using ssse3x2 recovery algorithm [ 0.641833] ACPI: Added _OSI(Module Device) [ 0.646153] ACPI: Added _OSI(Processor Device) [ 0.650730] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.655570] ACPI: Added _OSI(Processor Aggregator Device) [ 0.664671] ACPI: Executed 1 blocks of module-level executable AML code [ 0.673798] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.680547] ACPI: Dynamic OEM Table Load: [ 0.684994] ACPI: SSDT 0xFFFF880077137880 0000B3 (v02 PmRef Cpu0Cst 00003001 INTL 20130117) [ 0.694514] ACPI: Dynamic OEM Table Load: [ 0.698961] ACPI: SSDT 0xFFFF88017ABFB000 000471 (v02 PmRef Cpu0Ist 00003000 INTL 20130117) [ 0.708747] ACPI: Dynamic OEM Table Load: [ 0.713190] ACPI: SSDT 0xFFFF8800771A0800 00063B (v02 PmRef ApIst 00003000 INTL 20130117) [ 0.723065] ACPI: Dynamic OEM Table Load: [ 0.727510] ACPI: SSDT 0xFFFF880077135400 000231 (v02 PmRef ApCst 00003000 INTL 20130117) [ 0.737882] ACPI: Interpreter enabled [ 0.741701] ACPI: (supports S0 S4 S5) [ 0.745500] ACPI: Using IOAPIC for interrupt routing [ 0.750659] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.769839] ACPI: Power Resource [FN00] (off) [ 0.775983] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.782309] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig Segments MSI] [ 0.789595] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI] [ 0.799653] PCI host bridge to bus 0000:00 [ 0.803890] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.810817] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.817740] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.825359] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window] [ 0.832974] pci_bus 0000:00: root bus resource [mem 0x180000000-0x7fffffffff window] [ 0.840853] pci_bus 0000:00: root bus resource [mem 0xfe010000-0xfe010fff window] [ 0.848471] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.854100] pci 0000:00:00.0: [8086:1980] type 00 class 0x060000 [ 0.854296] pci 0000:00:04.0: [8086:19a1] type 00 class 0x060000 [ 0.854512] pci 0000:00:05.0: [8086:19a2] type 00 class 0x080700 [ 0.854610] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.854776] pci 0000:00:09.0: [8086:19a4] type 01 class 0x060400 [ 0.854800] pci 0000:00:09.0: reg 0x10: [mem 0x81600000-0x8161ffff 64bit] [ 0.854842] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.854940] pci 0000:00:09.0: System wakeup disabled by ACPI [ 0.860811] pci 0000:00:0e.0: [8086:19a8] type 01 class 0x060400 [ 0.860835] pci 0000:00:0e.0: reg 0x10: [mem 0x81620000-0x8163ffff 64bit] [ 0.860877] pci 0000:00:0e.0: PME# supported from D0 D3hot D3cold [ 0.860974] pci 0000:00:0e.0: System wakeup disabled by ACPI [ 0.866840] pci 0000:00:10.0: [8086:19aa] type 01 class 0x060400 [ 0.866864] pci 0000:00:10.0: reg 0x10: [mem 0x81640000-0x8165ffff 64bit] [ 0.866906] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold [ 0.867002] pci 0000:00:10.0: System wakeup disabled by ACPI [ 0.872874] pci 0000:00:12.0: [8086:19ac] type 00 class 0x088000 [ 0.872907] pci 0000:00:12.0: reg 0x10: [mem 0x81676000-0x816763ff 64bit] [ 0.873123] pci 0000:00:13.0: [8086:19b2] type 00 class 0x010601 [ 0.873151] pci 0000:00:13.0: reg 0x10: [mem 0x81674000-0x81675fff] [ 0.873160] pci 0000:00:13.0: reg 0x14: [mem 0x8167d000-0x8167d0ff] [ 0.873168] pci 0000:00:13.0: reg 0x18: [io 0x4058-0x405f] [ 0.873176] pci 0000:00:13.0: reg 0x1c: [io 0x4060-0x4063] [ 0.873185] pci 0000:00:13.0: reg 0x20: [io 0x4020-0x403f] [ 0.873193] pci 0000:00:13.0: reg 0x24: [mem 0x81678000-0x816787ff] [ 0.873229] pci 0000:00:13.0: PME# supported from D3hot [ 0.873379] pci 0000:00:15.0: [8086:19d0] type 00 class 0x0c0330 [ 0.873406] pci 0000:00:15.0: reg 0x10: [mem 0x81660000-0x8166ffff 64bit] [ 0.873458] pci 0000:00:15.0: PME# supported from D3hot D3cold [ 0.873567] pci 0000:00:15.0: System wakeup disabled by ACPI [ 0.879434] pci 0000:00:16.0: [8086:19d1] type 01 class 0x060400 [ 0.879487] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.879641] pci 0000:00:17.0: [8086:19d2] type 01 class 0x060400 [ 0.879693] pci 0000:00:17.0: PME# supported from D0 D3hot D3cold [ 0.879848] pci 0000:00:18.0: [8086:19d3] type 00 class 0x078000 [ 0.879887] pci 0000:00:18.0: reg 0x10: [mem 0x81677000-0x81677fff 64bit] [ 0.879964] pci 0000:00:18.0: PME# supported from D3hot [ 0.880122] pci 0000:00:1a.0: [8086:19d8] type 00 class 0x070002 [ 0.880146] pci 0000:00:1a.0: reg 0x10: [io 0x03f8-0x03ff] [ 0.880154] pci 0000:00:1a.0: reg 0x14: [mem 0x8167c000-0x8167c0ff] [ 0.880343] pci 0000:00:1a.1: [8086:19d8] type 00 class 0x070002 [ 0.880371] pci 0000:00:1a.1: reg 0x10: [io 0x4048-0x404f] [ 0.880380] pci 0000:00:1a.1: reg 0x14: [mem 0x8167b000-0x8167b0ff] [ 0.880571] pci 0000:00:1a.2: [8086:19d8] type 00 class 0x070002 [ 0.880594] pci 0000:00:1a.2: reg 0x10: [io 0x4040-0x4047] [ 0.880603] pci 0000:00:1a.2: reg 0x14: [mem 0x8167a000-0x8167a0ff] [ 0.880804] pci 0000:00:1f.0: [8086:19dc] type 00 class 0x060100 [ 0.881023] pci 0000:00:1f.2: [8086:19de] type 00 class 0x058000 [ 0.881037] pci 0000:00:1f.2: reg 0x10: [mem 0x81670000-0x81673fff] [ 0.881222] pci 0000:00:1f.4: [8086:19df] type 00 class 0x0c0500 [ 0.881241] pci 0000:00:1f.4: reg 0x10: [mem 0x81679000-0x816790ff 64bit] [ 0.881262] pci 0000:00:1f.4: reg 0x20: [io 0x4000-0x401f] [ 0.881425] pci 0000:00:1f.5: [8086:19e0] type 00 class 0x0c8000 [ 0.881440] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff] [ 0.881628] pci 0000:00:1f.7: [8086:19e1] type 00 class 0x130000 [ 0.881646] pci 0000:00:1f.7: reg 0x10: [mem 0x180800000-0x1808fffff 64bit] [ 0.881655] pci 0000:00:1f.7: reg 0x18: [mem 0xfb000000-0xfb7fffff 64bit] [ 0.881664] pci 0000:00:1f.7: reg 0x20: [mem 0x180900000-0x1809007ff 64bit] [ 0.881869] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.887047] pci 0000:02:00.0: [1b4b:9235] type 00 class 0x010601 [ 0.887074] pci 0000:02:00.0: reg 0x10: [io 0x3028-0x302f] [ 0.887083] pci 0000:02:00.0: reg 0x14: [io 0x3034-0x3037] [ 0.887092] pci 0000:02:00.0: reg 0x18: [io 0x3020-0x3027] [ 0.887101] pci 0000:02:00.0: reg 0x1c: [io 0x3030-0x3033] [ 0.887110] pci 0000:02:00.0: reg 0x20: [io 0x3000-0x301f] [ 0.887119] pci 0000:02:00.0: reg 0x24: [mem 0x81500000-0x815007ff] [ 0.887128] pci 0000:02:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref] [ 0.887165] pci 0000:02:00.0: PME# supported from D3hot [ 0.887201] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.893059] pci 0000:00:0e.0: PCI bridge to [bus 02] [ 0.898163] pci 0000:00:0e.0: bridge window [io 0x3000-0x3fff] [ 0.898167] pci 0000:00:0e.0: bridge window [mem 0x81500000-0x815fffff] [ 0.898244] pci 0000:03:00.0: [1b4b:9235] type 00 class 0x010601 [ 0.898270] pci 0000:03:00.0: reg 0x10: [io 0x2028-0x202f] [ 0.898279] pci 0000:03:00.0: reg 0x14: [io 0x2034-0x2037] [ 0.898288] pci 0000:03:00.0: reg 0x18: [io 0x2020-0x2027] [ 0.898297] pci 0000:03:00.0: reg 0x1c: [io 0x2030-0x2033] [ 0.898306] pci 0000:03:00.0: reg 0x20: [io 0x2000-0x201f] [ 0.898315] pci 0000:03:00.0: reg 0x24: [mem 0x80700000-0x807007ff] [ 0.898324] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref] [ 0.898360] pci 0000:03:00.0: PME# supported from D3hot [ 0.898397] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.904252] pci 0000:00:10.0: PCI bridge to [bus 03] [ 0.909355] pci 0000:00:10.0: bridge window [io 0x2000-0x2fff] [ 0.909359] pci 0000:00:10.0: bridge window [mem 0x80700000-0x807fffff] [ 0.909433] pci 0000:04:00.0: [8086:15e4] type 00 class 0x020000 [ 0.909465] pci 0000:04:00.0: reg 0x10: [mem 0x80400000-0x805fffff 64bit pref] [ 0.909490] pci 0000:04:00.0: reg 0x20: [mem 0x80604000-0x80607fff 64bit pref] [ 0.909499] pci 0000:04:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref] [ 0.909544] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.909575] pci 0000:04:00.0: reg 0x184: [mem 0x81300000-0x81303fff 64bit] [ 0.909578] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x81300000-0x813fffff 64bit] (contains BAR0 for 64 VFs) [ 0.919553] pci 0000:04:00.0: reg 0x190: [mem 0x81400000-0x81403fff 64bit] [ 0.919556] pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x81400000-0x814fffff 64bit] (contains BAR3 for 64 VFs) [ 0.929697] pci 0000:04:00.0: System wakeup disabled by ACPI [ 0.935571] pci 0000:04:00.1: [8086:15e4] type 00 class 0x020000 [ 0.935602] pci 0000:04:00.1: reg 0x10: [mem 0x80200000-0x803fffff 64bit pref] [ 0.935628] pci 0000:04:00.1: reg 0x20: [mem 0x80600000-0x80603fff 64bit pref] [ 0.935637] pci 0000:04:00.1: reg 0x30: [mem 0xfff80000-0xffffffff pref] [ 0.935682] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.935708] pci 0000:04:00.1: reg 0x184: [mem 0x81100000-0x81103fff 64bit] [ 0.935711] pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x81100000-0x811fffff 64bit] (contains BAR0 for 64 VFs) [ 0.945688] pci 0000:04:00.1: reg 0x190: [mem 0x81200000-0x81203fff 64bit] [ 0.945691] pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x81200000-0x812fffff 64bit] (contains BAR3 for 64 VFs) [ 0.955830] pci 0000:04:00.1: System wakeup disabled by ACPI [ 0.961693] pci 0000:00:16.0: PCI bridge to [bus 04-05] [ 0.967059] pci 0000:00:16.0: bridge window [mem 0x81100000-0x814fffff] [ 0.967064] pci 0000:00:16.0: bridge window [mem 0x80200000-0x806fffff 64bit pref] [ 0.967140] pci 0000:06:00.0: [8086:15e5] type 00 class 0x020000 [ 0.967171] pci 0000:06:00.0: reg 0x10: [mem 0x80a00000-0x80bfffff 64bit pref] [ 0.967196] pci 0000:06:00.0: reg 0x20: [mem 0x80c04000-0x80c07fff 64bit pref] [ 0.967205] pci 0000:06:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref] [ 0.967250] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 0.967280] pci 0000:06:00.0: reg 0x184: [mem 0x80f00000-0x80f03fff 64bit] [ 0.967283] pci 0000:06:00.0: VF(n) BAR0 space: [mem 0x80f00000-0x80ffffff 64bit] (contains BAR0 for 64 VFs) [ 0.977264] pci 0000:06:00.0: reg 0x190: [mem 0x81000000-0x81003fff 64bit] [ 0.977267] pci 0000:06:00.0: VF(n) BAR3 space: [mem 0x81000000-0x810fffff 64bit] (contains BAR3 for 64 VFs) [ 0.987407] pci 0000:06:00.0: System wakeup disabled by ACPI [ 0.993281] pci 0000:06:00.1: [8086:15e5] type 00 class 0x020000 [ 0.993312] pci 0000:06:00.1: reg 0x10: [mem 0x80800000-0x809fffff 64bit pref] [ 0.993338] pci 0000:06:00.1: reg 0x20: [mem 0x80c00000-0x80c03fff 64bit pref] [ 0.993347] pci 0000:06:00.1: reg 0x30: [mem 0xfff80000-0xffffffff pref] [ 0.993392] pci 0000:06:00.1: PME# supported from D0 D3hot D3cold [ 0.993418] pci 0000:06:00.1: reg 0x184: [mem 0x80d00000-0x80d03fff 64bit] [ 0.993421] pci 0000:06:00.1: VF(n) BAR0 space: [mem 0x80d00000-0x80dfffff 64bit] (contains BAR0 for 64 VFs) [ 1.003399] pci 0000:06:00.1: reg 0x190: [mem 0x80e00000-0x80e03fff 64bit] [ 1.003403] pci 0000:06:00.1: VF(n) BAR3 space: [mem 0x80e00000-0x80efffff 64bit] (contains BAR3 for 64 VFs) [ 1.013540] pci 0000:06:00.1: System wakeup disabled by ACPI [ 1.019399] pci 0000:00:17.0: PCI bridge to [bus 06-07] [ 1.024764] pci 0000:00:17.0: bridge window [mem 0x80d00000-0x810fffff] [ 1.024770] pci 0000:00:17.0: bridge window [mem 0x80800000-0x80cfffff 64bit pref] [ 1.024796] pci_bus 0000:00: on NUMA node 0 [ 1.025325] ACPI: PCI Interrupt Link [LNKA] (IRQs 6 7 10 11 12 14 15) *0, disabled. [ 1.034808] ACPI: PCI Interrupt Link [LNKB] (IRQs 6 7 10 11 12 14 15) *0, disabled. [ 1.044302] ACPI: PCI Interrupt Link [LNKC] (IRQs 6 7 10 11 12 14 15) *0, disabled. [ 1.053804] ACPI: PCI Interrupt Link [LNKD] (IRQs 6 7 10 11 12 14 15) *0, disabled. [ 1.063288] ACPI: PCI Interrupt Link [LNKE] (IRQs 6 7 10 11 12 14 15) *0, disabled. [ 1.072774] ACPI: PCI Interrupt Link [LNKF] (IRQs 6 7 10 11 12 14 15) *0, disabled. [ 1.082262] ACPI: PCI Interrupt Link [LNKG] (IRQs 6 7 10 11 12 14 15) *0, disabled. [ 1.091755] ACPI: PCI Interrupt Link [LNKH] (IRQs 6 7 10 11 12 14 15) *0, disabled. [ 1.101423] ACPI: Enabled 1 GPEs in block 00 to 7F [ 1.106842] vgaarb: loaded [ 1.109836] SCSI subsystem initialized [ 1.113825] libata version 3.00 loaded. [ 1.113921] pps_core: LinuxPPS API ver. 1 registered [ 1.119024] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.128314] PTP clock support registered [ 1.132497] EFI Variables Facility v0.08 2004-May-17 [ 1.160337] pstore: Registered efi as persistent store backend [ 1.166330] PCI: Using ACPI for IRQ routing [ 1.178678] PCI: pci_cache_line_size set to 64 bytes [ 1.178754] pci 0000:00:1f.7: can't claim BAR 2 [mem 0xfb000000-0xfb7fffff 64bit]: no compatible bridge window [ 1.188891] e820: reserve RAM buffer [mem 0x0005f000-0x0005ffff] [ 1.188893] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff] [ 1.188895] e820: reserve RAM buffer [mem 0x78241000-0x7bffffff] [ 1.188897] e820: reserve RAM buffer [mem 0x7f000000-0x7fffffff] [ 1.189284] clocksource: Switched to clocksource hpet [ 1.194652] AppArmor: AppArmor Filesystem Enabled [ 1.199552] pnp: PnP ACPI init [ 1.203092] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 1.209853] system 00:00: [mem 0x7f800000-0x7fffffff] could not be reserved [ 1.216962] system 00:00: [mem 0xfed60000-0xfed60fff] has been reserved [ 1.223725] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.223826] system 00:01: [io 0x1800-0x187f] could not be reserved [ 1.230241] system 00:01: [io 0x0500-0x05fe] has been reserved [ 1.236306] system 00:01: [io 0x0680-0x069f] has been reserved [ 1.242370] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved [ 1.249124] system 00:01: [mem 0x000c0000-0x000dffff] has been reserved [ 1.255885] system 00:01: [mem 0x000e0000-0x000fffff] could not be reserved [ 1.262989] system 00:01: [mem 0xff800000-0xffffffff] has been reserved [ 1.269750] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.269816] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.270002] system 00:03: [io 0x1800-0x18fe] could not be reserved [ 1.276416] system 00:03: [mem 0xfed03000-0xfed03fff] has been reserved [ 1.283179] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.283398] pnp: PnP ACPI: found 4 devices [ 1.297669] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.306689] pci 0000:02:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window [ 1.316747] pci 0000:03:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window [ 1.326801] pci 0000:04:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window [ 1.336856] pci 0000:04:00.1: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window [ 1.346912] pci 0000:06:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window [ 1.356969] pci 0000:06:00.1: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window [ 1.367059] pci 0000:00:1f.7: BAR 2: assigned [mem 0x180000000-0x1807fffff 64bit] [ 1.374691] pci 0000:00:09.0: PCI bridge to [bus 01] [ 1.379806] pci 0000:02:00.0: BAR 6: assigned [mem 0x81510000-0x8151ffff pref] [ 1.387170] pci 0000:00:0e.0: PCI bridge to [bus 02] [ 1.392274] pci 0000:00:0e.0: bridge window [io 0x3000-0x3fff] [ 1.398521] pci 0000:00:0e.0: bridge window [mem 0x81500000-0x815fffff] [ 1.405457] pci 0000:03:00.0: BAR 6: assigned [mem 0x80710000-0x8071ffff pref] [ 1.412821] pci 0000:00:10.0: PCI bridge to [bus 03] [ 1.417925] pci 0000:00:10.0: bridge window [io 0x2000-0x2fff] [ 1.424159] pci 0000:00:10.0: bridge window [mem 0x80700000-0x807fffff] [ 1.431100] pci 0000:04:00.0: BAR 6: assigned [mem 0x80680000-0x806fffff pref] [ 1.438466] pci 0000:04:00.1: BAR 6: no space for [mem size 0x00080000 pref] [ 1.445656] pci 0000:04:00.1: BAR 6: failed to assign [mem size 0x00080000 pref] [ 1.453191] pci 0000:00:16.0: PCI bridge to [bus 04-05] [ 1.458560] pci 0000:00:16.0: bridge window [mem 0x81100000-0x814fffff] [ 1.465492] pci 0000:00:16.0: bridge window [mem 0x80200000-0x806fffff 64bit pref] [ 1.473381] pci 0000:06:00.0: BAR 6: assigned [mem 0x80c80000-0x80cfffff pref] [ 1.480743] pci 0000:06:00.1: BAR 6: no space for [mem size 0x00080000 pref] [ 1.487934] pci 0000:06:00.1: BAR 6: failed to assign [mem size 0x00080000 pref] [ 1.495473] pci 0000:00:17.0: PCI bridge to [bus 06-07] [ 1.500839] pci 0000:00:17.0: bridge window [mem 0x80d00000-0x810fffff] [ 1.507771] pci 0000:00:17.0: bridge window [mem 0x80800000-0x80cfffff 64bit pref] [ 1.515660] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.515663] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.515665] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.515668] pci_bus 0000:00: resource 7 [mem 0x80000000-0xdfffffff window] [ 1.515671] pci_bus 0000:00: resource 8 [mem 0x180000000-0x7fffffffff window] [ 1.515673] pci_bus 0000:00: resource 9 [mem 0xfe010000-0xfe010fff window] [ 1.515676] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] [ 1.515679] pci_bus 0000:02: resource 1 [mem 0x81500000-0x815fffff] [ 1.515681] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] [ 1.515684] pci_bus 0000:03: resource 1 [mem 0x80700000-0x807fffff] [ 1.515687] pci_bus 0000:04: resource 1 [mem 0x81100000-0x814fffff] [ 1.515689] pci_bus 0000:04: resource 2 [mem 0x80200000-0x806fffff 64bit pref] [ 1.515692] pci_bus 0000:06: resource 1 [mem 0x80d00000-0x810fffff] [ 1.515695] pci_bus 0000:06: resource 2 [mem 0x80800000-0x80cfffff 64bit pref] [ 1.515783] NET: Registered protocol family 2 [ 1.520526] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 1.527966] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 1.534827] TCP: Hash tables configured (established 32768 bind 32768) [ 1.541537] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 1.547703] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 1.554425] NET: Registered protocol family 1 [ 1.559085] RPC: Registered named UNIX socket transport module. [ 1.565155] RPC: Registered udp transport module. [ 1.570000] RPC: Registered tcp transport module. [ 1.574843] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.582978] pci 0000:02:00.0: Apply mv9235 specific programming steps [ 1.589575] pci 0000:03:00.0: Apply mv9235 specific programming steps [ 1.596171] PCI: CLS 64 bytes, default 64 [ 1.898798] Trying to unpack rootfs image as initramfs... [ 3.531705] decompress cpio completed and skip redundant lzma [ 3.539738] Freeing initrd memory: 5980K (ffff880037441000 - ffff880037a18000) [ 3.547160] DMAR: No ATSR found [ 3.550720] DMAR: dmar0: Using Queued invalidation [ 3.555671] IOMMU passthrough mode = 1 [ 3.559586] DMAR: Hardware identity mapping for device 0000:00:00.0 [ 3.565997] DMAR: Hardware identity mapping for device 0000:00:04.0 [ 3.572408] DMAR: Hardware identity mapping for device 0000:00:05.0 [ 3.578818] DMAR: Hardware identity mapping for device 0000:00:09.0 [ 3.585226] DMAR: Hardware identity mapping for device 0000:00:0e.0 [ 3.591633] DMAR: Hardware identity mapping for device 0000:00:10.0 [ 3.598039] DMAR: Hardware identity mapping for device 0000:00:12.0 [ 3.604445] DMAR: Hardware identity mapping for device 0000:00:13.0 [ 3.610851] DMAR: Hardware identity mapping for device 0000:00:15.0 [ 3.617258] DMAR: Hardware identity mapping for device 0000:00:16.0 [ 3.623664] DMAR: Hardware identity mapping for device 0000:00:17.0 [ 3.630070] DMAR: Hardware identity mapping for device 0000:00:18.0 [ 3.636477] DMAR: Hardware identity mapping for device 0000:00:1a.0 [ 3.642889] DMAR: Hardware identity mapping for device 0000:00:1a.1 [ 3.649298] DMAR: Hardware identity mapping for device 0000:00:1a.2 [ 3.655704] DMAR: Hardware identity mapping for device 0000:00:1f.0 [ 3.662111] DMAR: Hardware identity mapping for device 0000:00:1f.2 [ 3.668517] DMAR: Hardware identity mapping for device 0000:00:1f.4 [ 3.674923] DMAR: Hardware identity mapping for device 0000:00:1f.5 [ 3.681330] DMAR: Hardware identity mapping for device 0000:00:1f.7 [ 3.687742] DMAR: Hardware identity mapping for device 0000:02:00.0 [ 3.694153] DMAR: Hardware identity mapping for device 0000:03:00.0 [ 3.700564] DMAR: Hardware identity mapping for device 0000:04:00.0 [ 3.706972] DMAR: Hardware identity mapping for device 0000:04:00.1 [ 3.713384] DMAR: Hardware identity mapping for device 0000:06:00.0 [ 3.719793] DMAR: Hardware identity mapping for device 0000:06:00.1 [ 3.726202] DMAR: Setting RMRR: [ 3.729484] DMAR: Ignoring identity map for HW passthrough device 0000:00:15.0 [0x7ab60000 - 0x7ab7ffff] [ 3.739102] DMAR: Prepare 0-16MiB unity mapping for LPC [ 3.744467] DMAR: Ignoring identity map for HW passthrough device 0000:00:1f.0 [0x0 - 0xffffff] [ 3.753307] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 3.759970] iommu: Adding device 0000:00:00.0 to group 0 [ 3.765442] iommu: Adding device 0000:00:04.0 to group 1 [ 3.770913] iommu: Adding device 0000:00:05.0 to group 2 [ 3.776382] iommu: Adding device 0000:00:09.0 to group 3 [ 3.781853] iommu: Adding device 0000:00:0e.0 to group 4 [ 3.787320] iommu: Adding device 0000:00:10.0 to group 5 [ 3.792791] iommu: Adding device 0000:00:12.0 to group 6 [ 3.798258] iommu: Adding device 0000:00:13.0 to group 7 [ 3.803728] iommu: Adding device 0000:00:15.0 to group 8 [ 3.809195] iommu: Adding device 0000:00:16.0 to group 9 [ 3.814666] iommu: Adding device 0000:00:17.0 to group 10 [ 3.820224] iommu: Adding device 0000:00:18.0 to group 11 [ 3.825792] iommu: Adding device 0000:00:1a.0 to group 12 [ 3.831348] iommu: Adding device 0000:00:1a.1 to group 12 [ 3.836901] iommu: Adding device 0000:00:1a.2 to group 12 [ 3.842472] iommu: Adding device 0000:00:1f.0 to group 13 [ 3.848025] iommu: Adding device 0000:00:1f.2 to group 13 [ 3.853576] iommu: Adding device 0000:00:1f.4 to group 13 [ 3.859128] iommu: Adding device 0000:00:1f.5 to group 13 [ 3.864679] iommu: Adding device 0000:00:1f.7 to group 13 [ 3.870237] iommu: Adding device 0000:02:00.0 to group 14 [ 3.875794] iommu: Adding device 0000:03:00.0 to group 15 [ 3.881355] iommu: Adding device 0000:04:00.0 to group 16 [ 3.886914] iommu: Adding device 0000:04:00.1 to group 17 [ 3.892474] iommu: Adding device 0000:06:00.0 to group 18 [ 3.898034] iommu: Adding device 0000:06:00.1 to group 19 [ 3.907247] audit: initializing netlink subsys (disabled) [ 3.915009] audit: type=2000 audit(1582195599.185:1): initialized [ 3.924341] Initialise system trusted keyring [ 3.953804] VFS: Disk quotas dquot_6.6.0 [ 3.958627] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.966335] NFS: Registering the id_resolver key type [ 3.971564] Key type id_resolver registered [ 3.975896] Key type id_legacy registered [ 3.980604] Key type asymmetric registered [ 3.984847] Asymmetric key parser 'x509' registered [ 3.989911] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 3.997453] io scheduler noop registered [ 4.001517] io scheduler deadline registered [ 4.005949] io scheduler cfq registered (default) [ 4.164302] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 4.581444] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 4.590399] console [ttyS0] disabled [ 4.614392] 0000:00:1a.0: ttyS0 at I/O 0x3f8 (irq = 16, base_baud = 115200) is a 16550A [ 4.622431] console [ttyS0] enabled [ 4.646630] 0000:00:1a.1: ttyS1 at I/O 0x4048 (irq = 17, base_baud = 115200) is a 16550A [ 4.675400] 0000:00:1a.2: ttyS2 at I/O 0x4040 (irq = 18, base_baud = 115200) is a 16550A [ 4.690712] brd: module loaded [ 4.693959] lpc_ich 0000:00:1f.0: I/O space for ACPI uninitialized [ 4.713589] lpc_ich 0000:00:1f.0: No MFD cells added [ 4.724958] Loading iSCSI transport class v2.0-870. [ 4.743417] ahci 0000:00:13.0: version 3.0 [ 4.754456] ahci 0000:00:13.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 4.763939] ahci 0000:00:13.0: flags: 64bit ncq led clo only pmp pio ems deso sadm sds apst [ 4.782770] scsi host0: ahci [ 4.790052] scsi host1: ahci [ 4.793329] ata1: SATA max UDMA/133 abar m2048@0x81678000 port 0x81678100 irq 275 [ 4.800961] ata2: SATA max UDMA/133 abar m2048@0x81678000 port 0x81678180 irq 275 [ 4.808832] Change defer qc mode on external port for compatibility [ 4.815251] Change defer qc mode on external port for compatibility [ 4.821662] Change defer qc mode on external port for compatibility [ 4.828069] Change defer qc mode on external port for compatibility [ 4.845352] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 4.853588] ahci 0000:02:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 4.864048] scsi host2: ahci [ 4.871469] scsi host3: ahci [ 4.877417] scsi host4: ahci [ 4.880744] scsi host5: ahci [ 4.884006] ata3: SATA max UDMA/133 abar m2048@0x81500000 port 0x81500100 irq 276 [ 4.891777] ata4: SATA max UDMA/133 abar m2048@0x81500000 port 0x81500180 irq 276 [ 4.899407] ata5: SATA max UDMA/133 abar m2048@0x81500000 port 0x81500200 irq 276 [ 4.907032] ata6: SATA max UDMA/133 abar m2048@0x81500000 port 0x81500280 irq 276 [ 4.914670] tsc: Refined TSC clocksource calibration: 2100.000 MHz [ 4.920995] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e4530a99b6, max_idle_ns: 440795257976 ns [ 4.921319] Change defer qc mode on external port for compatibility [ 4.921320] Change defer qc mode on external port for compatibility [ 4.921320] Change defer qc mode on external port for compatibility [ 4.921320] Change defer qc mode on external port for compatibility [ 4.933323] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 4.933327] ahci 0000:03:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 4.941357] scsi host6: ahci [ 4.945719] scsi host7: ahci [ 4.947183] scsi host8: ahci [ 4.949789] scsi host9: ahci [ 4.949888] ata7: SATA max UDMA/133 abar m2048@0x80700000 port 0x80700100 irq 277 [ 4.949890] ata8: SATA max UDMA/133 abar m2048@0x80700000 port 0x80700180 irq 277 [ 4.949892] ata9: SATA max UDMA/133 abar m2048@0x80700000 port 0x80700200 irq 277 [ 4.949894] ata10: SATA max UDMA/133 abar m2048@0x80700000 port 0x80700280 irq 277 [ 4.950065] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 6.007371] ata3: SATA link down (SStatus 0 SControl 300) [ 6.008245] i8042: No controller found [ 6.008309] rtc_cmos 00:02: RTC can wake from S4 [ 6.008595] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 6.008658] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs [ 6.008698] i2c /dev entries driver [ 6.008938] i801_smbus 0000:00:1f.4: SMBus using polling [ 6.012947] md: linear personality registered for level -1 [ 6.012949] md: raid0 personality registered for level 0 [ 6.012951] md: raid1 personality registered for level 1 [ 6.012953] md: raid10 personality registered for level 10 [ 6.066433] clocksource: Switched to clocksource tsc [ 6.066486] md: raid6 personality registered for level 6 [ 6.066487] md: raid5 personality registered for level 5 [ 6.066488] md: raid4 personality registered for level 4 [ 6.066745] ata3: No present pin info for SATA link down event [ 6.066784] ata4: SATA link down (SStatus 0 SControl 300) [ 6.066786] ata4: No present pin info for SATA link down event [ 6.071616] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 6.071770] NET: Registered protocol family 17 [ 6.071805] Key type dns_resolver registered [ 6.072263] registered taskstats version 1 [ 6.072266] Loading compiled-in untrusted X.509 certificates [ 6.072268] Loading compiled-in X.509 certificates [ 6.072300] Loaded X.509 cert 'Synology SDG kernel module signing key: 7bd0b0d6bcd31651c22ce3978bdc8c8bdc417329' [ 6.073809] Loaded X.509 cert 'Synology Root Certification Authority: f2c075361f168425f8b5ef31b796406c3aab2089' [ 6.073828] Loaded X.509 cert 'Synology Kernel Module Signing Certification Authority: 600839b5d127e0e11d817a31f0575d323a7c0e28' [ 6.073842] Loaded X.509 cert 'Synology kernel module signing key: 4646ce54489669338118a3b1286da156ac366fa5' [ 6.073852] page_owner is disabled [ 6.073871] AppArmor: AppArmor sha1 policy hashing enabled [ 6.077009] rtc_cmos 00:02: setting system clock to 2020-02-20 10:46:43 UTC (1582195603) [ 6.126301] ata7: SATA link down (SStatus 0 SControl 300) [ 6.126303] ata7: No present pin info for SATA link down event [ 6.180169] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 6.181749] ata2.00: ATA-8: HGST HMS5C4040ALE640, MPAOA580, max UDMA/133 [ 6.181751] ata2.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 6.181752] ata2.00: SN: PL1331LAGUE8JH [ 6.183377] ata2.00: configured for UDMA/133 [ 6.224296] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 6.225863] ata1.00: ATA-8: HGST HMS5C4040ALE640, MPAOA580, max UDMA/133 [ 6.225864] ata1.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 6.225865] ata1.00: SN: PL1331LAGZDVTH [ 6.227487] ata1.00: configured for UDMA/133 [ 6.229998] scsi 0:0:0:0: Direct-Access HGST HMS5C4040ALE640 A580 PQ: 0 ANSI: 5 [ 6.230262] sd 0:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB) [ 6.230265] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 6.230369] sd 0:0:0:0: [sda] Write Protect is off [ 6.230372] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.230400] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.232614] scsi 1:0:0:0: Direct-Access HGST HMS5C4040ALE640 A580 PQ: 0 ANSI: 5 [ 6.232925] sd 1:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB) [ 6.232930] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 6.232993] sd 1:0:0:0: [sdb] Write Protect is off [ 6.232996] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 6.233022] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.259311] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 6.260897] ata6.00: ATA-8: HGST HMS5C4040ALE640, MPAOA580, max UDMA/133 [ 6.260899] ata6.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 6.260900] ata6.00: SN: PL1331LAGZ4MGH [ 6.262526] ata6.00: configured for UDMA/133 [ 6.277299] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 6.278880] ata5.00: ATA-8: HGST HMS5C4040ALE640, MPAOA580, max UDMA/133 [ 6.278882] ata5.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 6.278883] ata5.00: SN: PL1331LAGUAZ2H [ 6.280532] ata5.00: configured for UDMA/133 [ 6.282005] scsi 4:0:0:0: Direct-Access HGST HMS5C4040ALE640 A580 PQ: 0 ANSI: 5 [ 6.282294] sd 4:0:0:0: [sdd] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB) [ 6.282297] sd 4:0:0:0: [sdd] 4096-byte physical blocks [ 6.282356] sd 4:0:0:0: [sdd] Write Protect is off [ 6.282358] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 6.282385] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.284941] scsi 5:0:0:0: Direct-Access HGST HMS5C4040ALE640 A580 PQ: 0 ANSI: 5 [ 6.285219] sd 5:0:0:0: [sdc] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB) [ 6.285221] sd 5:0:0:0: [sdc] 4096-byte physical blocks [ 6.285322] sd 5:0:0:0: [sdc] Write Protect is off [ 6.285325] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 6.285352] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.298107] sda: sda1 sda2 sda5 [ 6.298562] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.306697] sdb: sdb1 sdb2 sdb5 [ 6.307129] sd 1:0:0:0: [sdb] Attached SCSI disk [ 6.313318] ata8: SATA link down (SStatus 0 SControl 300) [ 6.313320] ata8: No present pin info for SATA link down event [ 6.313351] ata10: SATA link down (SStatus 0 SControl 300) [ 6.313353] ata10: No present pin info for SATA link down event [ 6.313385] ata9: SATA link down (SStatus 0 SControl 300) [ 6.313386] ata9: No present pin info for SATA link down event [ 6.351818] sdd: sdd1 sdd2 sdd5 [ 6.352258] sd 4:0:0:0: [sdd] Attached SCSI removable disk [ 6.357745] sdc: sdc1 sdc2 sdc5 [ 6.358230] sd 5:0:0:0: [sdc] Attached SCSI removable disk [ 6.541206] Freeing unused kernel memory: 864K (ffffffff81879000 - ffffffff81951000) [ 6.548949] Write protecting the kernel read-only data: 8192k [ 6.555155] Freeing unused kernel memory: 616K (ffff880001566000 - ffff880001600000) [ 6.563952] Freeing unused kernel memory: 232K (ffff8800017c6000 - ffff880001800000) [ 6.640589] ACPI: bus type USB registered [ 6.644789] usbcore: registered new interface driver usbfs [ 6.650434] usbcore: registered new interface driver hub [ 6.655931] usbcore: registered new interface driver ethub [ 6.661587] usbcore: registered new device driver usb [ 6.678974] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 6.691529] ehci-pci: EHCI PCI platform driver [ 6.706748] uhci_hcd: USB Universal Host Controller Interface driver [ 6.732371] xhci_hcd 0000:00:15.0: xHCI Host Controller [ 6.738297] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1 [ 6.746937] xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009010 [ 6.755517] xhci_hcd 0000:00:15.0: cache line size of 64 is not supported [ 6.755833] hub 1-0:1.0: USB hub found [ 6.759737] hub 1-0:1.0: 4 ports detected [ 6.763907] port1 is going to power up Vbus by GPIO#18(ACTIVE_HIGH) [ 6.870582] host 0000:00:15.0 port 2 has Vbus GPIO#18 with polarity ACTIVE_HIGH [ 6.878178] host 0000:00:15.0 port 3 has Vbus GPIO#2 with polarity ACTIVE_HIGH [ 6.885929] xhci_hcd 0000:00:15.0: xHCI Host Controller [ 6.891294] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2 [ 6.898850] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 6.907274] hub 2-0:1.0: USB hub found [ 6.911174] hub 2-0:1.0: 4 ports detected [ 6.915491] host 0000:00:15.0 port 2 has Vbus GPIO#18 with polarity ACTIVE_HIGH [ 6.923087] host 0000:00:15.0 port 3 has Vbus GPIO#2 with polarity ACTIVE_HIGH [ 6.954052] denverton_synobios: module license 'Synology Inc.' taints kernel. [ 6.961565] Disabling lock debugging due to kernel taint [ 6.968026] 2020-2-20 10:46:44 UTC [ 6.971577] synobios: load, major number 201 [ 6.975986] Brand: Synology [ 6.979214] Model: DS-1819+ [ 6.982301] set group disks wakeup number to 4, spinup time deno 7 [ 6.988675] synobios cpu_arch proc entry initialized [ 6.993777] synobios crypto_hw proc entry initialized [ 6.998974] synobios syno_platform proc entry initialized [ 7.004524] synobios open /dev/ttyS1 success [ 7.015588] synobios: unload [ 7.035393] md: Autodetecting RAID arrays. [ 7.101467] md: invalid raid superblock magic on sda5 [ 7.106682] md: sda5 does not have a valid v0.90 superblock, not importing! [ 7.186197] md: invalid raid superblock magic on sdb5 [ 7.191389] md: sdb5 does not have a valid v0.90 superblock, not importing! [ 7.215295] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 7.263204] md: invalid raid superblock magic on sdc5 [ 7.268393] md: sdc5 does not have a valid v0.90 superblock, not importing! [ 7.317912] random: nonblocking pool is initialized [ 7.356103] md: invalid raid superblock magic on sdd5 [ 7.361303] md: sdd5 does not have a valid v0.90 superblock, not importing! [ 7.368428] md: Scanned 12 and added 8 devices. [ 7.373177] md: autorun ... [ 7.376168] md: considering sda1 ... [ 7.379903] md: adding sda1 ... [ 7.383389] md: sda2 has different UUID to sda1 [ 7.388079] md: adding sdb1 ... [ 7.391447] md: sdb2 has different UUID to sda1 [ 7.396115] md: adding sdc1 ... [ 7.399479] md: sdc2 has different UUID to sda1 [ 7.404148] md: adding sdd1 ... [ 7.407512] md: sdd2 has different UUID to sda1 [ 7.412191] md: created md0 [ 7.415121] md: bind [ 7.417979] md: bind [ 7.420837] md: bind [ 7.423698] md: bind [ 7.426566] md: running: [ 7.432413] md/raid1:md0: active with 4 out of 8 mirrors [ 7.473325] md0: detected capacity change from 0 to 2549940224 [ 7.479326] md: considering sda2 ... [ 7.483048] md: adding sda2 ... [ 7.486424] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd [ 7.493095] md: adding sdb2 ... [ 7.496464] md: adding sdc2 ... [ 7.499831] md: adding sdd2 ... [ 7.504454] md: created md1 [ 7.507392] usb 2-2: This is Synology external hub. Skip check_superspeed [ 7.514324] md: bind [ 7.517185] md: bind [ 7.520043] md: bind [ 7.522896] md: bind [ 7.525763] md: running: [ 7.532590] md/raid1:md1: active with 4 out of 8 mirrors [ 7.538688] Set serial number "syno.ext.hub" for Synology External hub. [ 7.549422] md1: detected capacity change from 0 to 2147418112 [ 7.555442] hub 2-2:1.0: USB hub found [ 7.559381] md: ... autorun DONE. [ 7.562857] hub 2-2:1.0: 4 ports detected [ 7.568057] port1 is going to power up Vbus by GPIO#19(ACTIVE_LOW) [ 7.651289] usb 1-2: new high-speed USB device number 3 using xhci_hcd [ 7.801302] usb 1-2: This is Synology external hub. Skip check_superspeed [ 8.391174] EXT4-fs (md0): barriers disabled [ 8.403480] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: [ 8.587713] host syno.ext.hub port 1 has Vbus GPIO#19 with polarity ACTIVE_LOW [ 8.595080] port1 is going to power up Vbus by GPIO#20(ACTIVE_LOW) [ 9.601599] port1 is going to power up Vbus by GPIO#21(ACTIVE_LOW) [ 10.608176] host syno.ext.hub port 2 has Vbus GPIO#20 with polarity ACTIVE_LOW [ 10.615557] host syno.ext.hub port 3 has Vbus GPIO#21 with polarity ACTIVE_LOW [ 10.629561] Set serial number "syno.ext.hub" for Synology External hub. [ 10.637472] hub 1-2:1.0: USB hub found [ 10.641899] hub 1-2:1.0: 4 ports detected [ 10.647234] host syno.ext.hub port 1 has Vbus GPIO#19 with polarity ACTIVE_LOW [ 10.654625] host syno.ext.hub port 2 has Vbus GPIO#20 with polarity ACTIVE_LOW [ 10.662012] host syno.ext.hub port 3 has Vbus GPIO#21 with polarity ACTIVE_LOW [ 10.876215] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1 [ 10.913349] usb 2-2.1: new SuperSpeed USB device number 3 using xhci_hcd [ 11.749002] EXT4-fs (md0): re-mounted. Opts: (null) [ 15.698924] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 15.704443] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 15.710229] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 15.715741] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 16.169405] Adding 2097084k swap on /dev/md1. Priority:-1 extents:1 across:2097084k [ 16.516208] zram: Added device: zram0 [ 16.520224] zram: Added device: zram1 [ 16.524487] zram: Added device: zram2 [ 16.528495] zram: Added device: zram3 [ 16.542060] zram0: detected capacity change from 0 to 611319808 [ 16.556414] Adding 596988k swap on /dev/zram0. Priority:1 extents:1 across:596988k SS [ 16.566701] zram1: detected capacity change from 0 to 611319808 [ 16.580850] Adding 596988k swap on /dev/zram1. Priority:1 extents:1 across:596988k SS [ 16.591114] zram2: detected capacity change from 0 to 611319808 [ 16.605355] Adding 596988k swap on /dev/zram2. Priority:1 extents:1 across:596988k SS [ 16.615667] zram3: detected capacity change from 0 to 611319808 [ 16.630046] Adding 596988k swap on /dev/zram3. Priority:1 extents:1 across:596988k SS [ 18.275836] NET: Registered protocol family 10 [ 18.325019] sit: IPv6 over IPv4 tunneling driver [ 18.648713] init: syno-auth-check main process (5151) killed by TERM signal [ 19.049881] Monitor-Mwait will be used to enter C-1 state [ 19.049892] Monitor-Mwait will be used to enter C-2 state [ 19.049898] ACPI: acpi_idle registered with cpuidle [ 19.470472] SSE version of gcm_enc/dec engaged. [ 19.514599] fuse init (API version 7.23) [ 19.568574] e1000e: Intel(R) PRO/1000 Network Driver - 3.3.4-NAPI [ 19.574817] e1000e: Copyright(c) 1999 - 2016 Intel Corporation. [ 19.595169] Intel(R) Gigabit Ethernet Network Driver - version 5.3.5.3 [ 19.601849] Copyright (c) 2007-2015 Intel Corporation. [ 19.625741] Intel(R) 10GbE PCI Express Linux Network Driver - version 5.1.3 [ 19.632853] Copyright(c) 1999 - 2017 Intel Corporation. [ 19.891334] ixgbe 0000:04:00.0 eth0: MAC: 6, PHY: 27, PBA No: 000600-000 [ 19.898201] ixgbe 0000:04:00.0: 00:a0:c9:00:00:00 [ 19.903079] ixgbe 0000:04:00.0 eth0: Enabled Features: RxQ: 4 TxQ: 4 FdirHash vxlan_rx [ 19.920452] ixgbe 0000:04:00.0 eth0: Intel(R) 10 Gigabit Network Connection [ 20.179336] ixgbe 0000:04:00.1 eth1: MAC: 6, PHY: 27, PBA No: 000600-000 [ 20.186185] ixgbe 0000:04:00.1: 34:12:78:56:01:01 [ 20.191075] ixgbe 0000:04:00.1 eth1: Enabled Features: RxQ: 4 TxQ: 4 FdirHash vxlan_rx [ 20.204335] ixgbe 0000:04:00.1 eth1: Intel(R) 10 Gigabit Network Connection [ 20.211678] pcieport 0000:00:17.0: can't derive routing for PCI INT A [ 20.218309] ixgbe 0000:06:00.0: PCI INT A: no GSI [ 20.330363] systemd-udevd[5933]: starting version 204 [ 20.469318] ixgbe 0000:06:00.0 eth2: MAC: 6, PHY: 27, PBA No: 000600-000 [ 20.476044] ixgbe 0000:06:00.0: 00:a0:c9:00:00:02 [ 20.488833] ixgbe 0000:06:00.0 eth2: Enabled Features: RxQ: 4 TxQ: 4 FdirHash vxlan_rx [ 20.514312] ixgbe 0000:06:00.0 eth2: Intel(R) 10 Gigabit Network Connection [ 20.772377] ixgbe 0000:06:00.1 eth3: MAC: 6, PHY: 27, PBA No: 000600-000 [ 20.779223] ixgbe 0000:06:00.1: 34:12:78:56:01:03 [ 20.784068] ixgbe 0000:06:00.1 eth3: Enabled Features: RxQ: 4 TxQ: 4 FdirHash vxlan_rx [ 20.798417] ixgbe 0000:06:00.1 eth3: Intel(R) 10 Gigabit Network Connection [ 20.876662] i40e: Intel(R) 40-10 Gigabit Ethernet Connection Network Driver - version 2.3.6 [ 20.885192] i40e: Copyright(c) 2013 - 2017 Intel Corporation. [ 20.934476] tn40xx low_mem_msg proc entry initialized [ 20.939718] tn40xx low_mem_counter proc entry initialized [ 20.948221] tn40xx debug_msg proc entry initialized [ 20.956549] tn40xx: Tehuti Network Driver, 0.3.6.12.3 [ 21.063828] qed_init called [ 21.066775] QLogic FastLinQ 4xxxx Core Module qed 8.33.9.0 [ 21.072845] creating debugfs root node [ 21.095463] qede_init: QLogic FastLinQ 4xxxx Ethernet Driver qede 8.33.9.0 [ 21.133321] Compat-mlnx-ofed backport release: c22af88 [ 21.139021] Backport based on mlnx_ofed/mlnx-ofa_kernel-4.0.git c22af88 [ 21.145913] compat.git: mlnx_ofed/mlnx-ofa_kernel-4.0.git [ 22.001297] Bluetooth: Core ver 2.21 [ 22.005036] NET: Registered protocol family 31 [ 22.009621] Bluetooth: HCI device and connection manager initialized [ 22.016116] Bluetooth: HCI socket layer initialized [ 22.021131] Bluetooth: L2CAP socket layer initialized [ 22.026328] Bluetooth: SCO socket layer initialized [ 22.328889] Bluetooth: RFCOMM TTY layer initialized [ 22.333922] Bluetooth: RFCOMM socket layer initialized [ 22.339238] Bluetooth: RFCOMM ver 1.11 [ 22.703489] bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.713.36 ($DateTime: 2016/06/16 03:53:41 $) [ 22.777443] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 22.783549] Bluetooth: HIDP socket layer initialized [ 22.838436] usbcore: registered new interface driver btusb [ 22.914641] Btrfs loaded, crc32c=crc32c-intel [ 23.056154] exFAT: Version 1.2.9 [ 23.773074] 2020-2-20 10:47:1 UTC [ 23.776530] synobios: load, major number 201 [ 23.781442] Brand: Synology [ 23.784666] Model: DS-1819+ [ 23.787966] set group disks wakeup number to 4, spinup time deno 7 [ 23.794662] synobios cpu_arch proc entry initialized [ 23.800059] synobios crypto_hw proc entry initialized [ 23.805394] synobios syno_platform proc entry initialized [ 23.810954] synobios open /dev/ttyS1 success [ 26.115591] ip_tables: (C) 2000-2006 Netfilter Core Team [ 26.149611] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 26.282960] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 26.397818] ixgbe 0000:04:00.0: registered PHC device on eth0 [ 26.499972] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 27.630369] ixgbe 0000:04:00.1: registered PHC device on eth1 [ 27.724922] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 28.792657] ixgbe 0000:06:00.0: registered PHC device on eth2 [ 28.890254] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready [ 29.964821] ixgbe 0000:06:00.1: registered PHC device on eth3 [ 30.065200] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready [ 31.750854] md: md2 stopped. [ 31.755236] md: bind [ 31.758255] md: bind [ 31.761264] md: bind [ 31.764268] md: bind [ 31.772171] md/raid:md2: device sda5 operational as raid disk 0 [ 31.779276] md/raid:md2: device sdd5 operational as raid disk 3 [ 31.785565] md/raid:md2: device sdc5 operational as raid disk 2 [ 31.791822] md/raid:md2: device sdb5 operational as raid disk 1 [ 31.799096] md/raid:md2: allocated 4376kB [ 31.803487] md/raid:md2: raid level 5 active with 4 out of 4 devices, algorithm 2 [ 31.811108] RAID conf printout: [ 31.811110] --- level:5 rd:4 wd:4 [ 31.811112] disk 0, o:1, dev:sda5 [ 31.811114] disk 1, o:1, dev:sdb5 [ 31.811116] disk 2, o:1, dev:sdc5 [ 31.811118] disk 3, o:1, dev:sdd5 [ 31.832455] md2: detected capacity change from 0 to 11987519864832 [ 33.242087] BTRFS: device label 2020.02.18-13:14:09 v24922 devid 1 transid 2556 /dev/vg1000/lv [ 33.251592] BTRFS info (device dm-0): enabling auto syno reclaim space [ 33.258270] BTRFS info (device dm-0): using free space tree [ 33.263986] BTRFS info (device dm-0): has skinny extents [ 34.785283] usb-storage 1-1:1.0: USB Mass Storage device detected [ 34.806339] scsi host10: usb-storage 1-1:1.0 [ 34.810892] usbcore: registered new interface driver usb-storage [ 34.850957] usbcore: registered new interface driver usblp [ 34.879335] usbcore: registered new interface driver usbhid [ 34.885156] usbhid: USB HID core driver [ 35.813627] scsi 10:0:0:0: Direct-Access Synology DiskStation DL17 PQ: 0 ANSI: 6 [ 35.822777] sd 10:0:0:0: Attached scsi generic sg4 type 0 [ 35.823811] sd 10:0:0:0: [synoboot] 245760 512-byte logical blocks: (126 MB/120 MiB) [ 35.824620] sd 10:0:0:0: [synoboot] Write Protect is off [ 35.824623] sd 10:0:0:0: [synoboot] Mode Sense: 23 00 00 00 [ 35.825434] sd 10:0:0:0: [synoboot] No Caching mode page found [ 35.825436] sd 10:0:0:0: [synoboot] Assuming drive cache: write through [ 35.831530] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 35.831532] GPT:239649 != 245759 [ 35.831532] GPT:Alternate GPT header not at the end of the disk. [ 35.831533] GPT:239649 != 245759 [ 35.831533] GPT: Use GNU Parted to correct GPT errors. [ 35.831545] synoboot: synoboot1 synoboot2 [ 35.838539] sd 10:0:0:0: [synoboot] Attached SCSI disk [ 39.069507] ata5.00: configured for UDMA/133 [ 39.073925] ata5: EH complete [ 39.617120] ata6.00: configured for UDMA/133 [ 39.621546] ata6: EH complete [ 40.017401] ata1.00: configured for UDMA/133 [ 40.021835] ata1: EH complete [ 40.379423] ata2.00: configured for UDMA/133 [ 40.383849] ata2: EH complete [ 62.341849] iSCSI:target_core_rodsp_server.c:1027:rodsp_server_init RODSP server started, login_key(001132c08c5d). [ 62.368959] iSCSI:extent_pool.c:766:ep_init syno_extent_pool successfully initialized [ 62.403615] iSCSI:target_core_device.c:617:se_dev_align_max_sectors Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 62.425858] iSCSI:target_core_lunbackup.c:361:init_io_buffer_head 512 buffers allocated, total 2097152 bytes successfully [ 62.532920] iSCSI:target_core_file.c:146:fd_attach_hba RODSP plugin for fileio is enabled. [ 62.541519] iSCSI:target_core_file.c:153:fd_attach_hba ODX Token Manager is enabled. [ 62.550304] iSCSI:target_core_multi_file.c:91:fd_attach_hba RODSP plugin for multifile is enabled. [ 62.572661] iSCSI:target_core_ep.c:813:ep_attach_hba RODSP plugin for epio is enabled. [ 62.588086] iSCSI:target_core_ep.c:820:ep_attach_hba ODX Token Manager is enabled. [ 63.483761] capability: warning: `nginx' uses 32-bit capabilities (legacy support in use) [ 63.583781] loop: module loaded [ 63.845329] init: iscsi_pluginserverd main process (11398) killed by TERM signal [ 63.854182] init: iscsi_pluginengined main process (11378) killed by TERM signal [ 65.154490] init: iscsi_pluginserverd main process (11984) killed by TERM signal [ 65.163771] init: iscsi_pluginengined main process (11943) killed by TERM signal [ 67.875608] init: nmbd main process (11095) killed by TERM signal [ 67.904773] r8152: module verification failed: signature and/or required key missing - tainting kernel [ 67.914987] usbcore: registered new interface driver r8152 [ 68.005940] usb 2-2.1: reset SuperSpeed USB device number 3 using xhci_hcd [ 68.093069] init: btacd main process (8072) killed by TERM signal [ 68.130351] r8152 2-2.1:1.0 eth4: v2.12.0 (2019/04/29) [ 68.135671] r8152 2-2.1:1.0 eth4: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 68.843482] init: synoscheduler-vmtouch main process (4485) killed by TERM signal [ 69.156925] init: synoscheduler-vmtouch main process (13259) killed by TERM signal [ 69.651489] init: nmbd main process (13421) killed by TERM signal [ 72.730876] init: bluetoothd main process (7831) killed by KILL signal [ 75.495544] init: nmbd main process (13943) killed by TERM signal [ 78.319232] init: nmbd main process (15440) killed by TERM signal [ 89.991243] init: nmbd main process (16180) killed by TERM signal [ 206.107490] ixgbe 0000:04:00.0 eth0: NIC Link is Up 1 Gbps, Flow Control: RX/TX [ 206.114979] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 207.379933] init: nmbd main process (16580) killed by TERM signal [ 207.522635] init: dhcp-client (eth0) main process (8763) killed by TERM signal [ 207.802830] init: nmbd main process (17629) killed by TERM signal [ 208.470740] init: iscsi_pluginserverd main process (17486) killed by TERM signal [ 208.481568] init: iscsi_pluginengined main process (17477) killed by TERM signal [ 208.514646] init: nmbd main process (17793) killed by TERM signal [ 208.821473] init: iscsi_pluginserverd main process (17912) killed by TERM signal [ 208.834245] init: iscsi_pluginengined main process (17899) killed by TERM signal [ 209.125676] init: iscsi_pluginengined main process (18187) killed by TERM signal [ 210.011379] init: nmbd main process (18573) killed by TERM signal [ 212.472463] ixgbe 0000:04:00.1: removed PHC on eth1 [ 213.630756] ixgbe 0000:04:00.1: registered PHC device on eth1 [ 213.726818] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 213.758938] ixgbe 0000:06:00.0: removed PHC on eth2 [ 214.375937] init: iscsi_pluginserverd main process (19789) killed by TERM signal [ 214.386815] init: iscsi_pluginengined main process (19783) killed by TERM signal [ 214.927300] ixgbe 0000:06:00.0: registered PHC device on eth2 [ 214.935712] init: iscsi_pluginserverd main process (20459) killed by TERM signal [ 214.949886] init: iscsi_pluginengined main process (20437) killed by TERM signal [ 215.021054] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready [ 215.074135] ixgbe 0000:06:00.1: removed PHC on eth3 [ 216.247744] ixgbe 0000:06:00.1: registered PHC device on eth3 [ 216.330099] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready [ 278.983085] usbcore: deregistering interface driver r8152 [ 283.150664] usb 2-2.1: reset SuperSpeed USB device number 3 using xhci_hcd [ 283.272474] r8152 2-2.1:1.0 eth4: v2.12.0 (2019/04/29) [ 283.277758] r8152 2-2.1:1.0 eth4: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 283.293910] usbcore: registered new interface driver r8152 [ 283.379505] IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready