Skip to content
Find file
Fetching contributors…
Cannot retrieve contributors at this time
executable file 666 lines (545 sloc) 20 KB
#!/bin/bash
#
# ZFS/ZPOOL configuration test script.
basedir="$(dirname $0)"
SCRIPT_COMMON=common.sh
if [ -f "${basedir}/${SCRIPT_COMMON}" ]; then
. "${basedir}/${SCRIPT_COMMON}"
else
echo "Missing helper script ${SCRIPT_COMMON}" && exit 1
fi
PROG=zconfig.sh
usage() {
cat << EOF
USAGE:
$0 [hvcts]
DESCRIPTION:
ZFS/ZPOOL configuration tests
OPTIONS:
-h Show this message
-v Verbose
-c Cleanup lo+file devices at start
-t <#> Run listed tests
-s <#> Skip listed tests
EOF
}
while getopts 'hvct:s:?' OPTION; do
case $OPTION in
h)
usage
exit 1
;;
v)
VERBOSE=1
;;
c)
CLEANUP=1
;;
t)
TESTS_RUN=($OPTARG)
;;
s)
TESTS_SKIP=($OPTARG)
;;
?)
usage
exit
;;
esac
done
if [ $(id -u) != 0 ]; then
die "Must run as root"
fi
# Initialize the test suite
init
# Perform pre-cleanup is requested
if [ ${CLEANUP} ]; then
${ZFS_SH} -u
cleanup_md_devices
cleanup_loop_devices
rm -f /tmp/zpool.cache.*
fi
# Check if we need to skip the tests that require scsi_debug and lsscsi.
SCSI_DEBUG=0
${INFOMOD} scsi_debug &>/dev/null && SCSI_DEBUG=1
HAVE_LSSCSI=0
test -f ${LSSCSI} && HAVE_LSSCSI=1
if [ ${SCSI_DEBUG} -eq 0 ] || [ ${HAVE_LSSCSI} -eq 0 ]; then
echo "Skipping test 10 which requires the scsi_debug " \
"module and the ${LSSCSI} utility"
fi
# Validate persistent zpool.cache configuration.
test_1() {
local POOL_NAME=test1
local TMP_FILE1=`mktemp`
local TMP_FILE2=`mktemp`
local TMP_CACHE=`mktemp -p /tmp zpool.cache.XXXXXXXX`
# Create a pool save its status for comparison.
${ZFS_SH} zfs="spa_config_path=${TMP_CACHE}" || fail 1
${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 || fail 2
${ZPOOL} status ${POOL_NAME} >${TMP_FILE1} || fail 3
# Unload/load the module stack and verify the pool persists.
${ZFS_SH} -u || fail 4
${ZFS_SH} zfs="spa_config_path=${TMP_CACHE}" || fail 5
${ZPOOL} status ${POOL_NAME} >${TMP_FILE2} || fail 6
cmp ${TMP_FILE1} ${TMP_FILE2} || fail 7
# Cleanup the test pool and temporary files
${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 -d || fail 8
rm -f ${TMP_FILE1} ${TMP_FILE2} ${TMP_CACHE} || fail 9
${ZFS_SH} -u || fail 10
pass
}
run_test 1 "persistent zpool.cache"
# Validate ZFS disk scanning and import w/out zpool.cache configuration.
test_2() {
local POOL_NAME=test2
local TMP_FILE1=`mktemp`
local TMP_FILE2=`mktemp`
local TMP_CACHE=`mktemp -p /tmp zpool.cache.XXXXXXXX`
# Create a pool save its status for comparison.
${ZFS_SH} zfs="spa_config_path=${TMP_CACHE}" || fail 1
${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 || fail 2
${ZPOOL} status ${POOL_NAME} >${TMP_FILE1} || fail 3
# Unload the module stack, remove the cache file, load the module
# stack and attempt to probe the disks to import the pool. As
# a cross check verify the old pool state against the imported.
${ZFS_SH} -u || fail 4
rm -f ${TMP_CACHE} || fail 5
${ZFS_SH} zfs="spa_config_path=${TMP_CACHE}" || fail 6
${ZPOOL} import | grep ${POOL_NAME} >/dev/null || fail 7
${ZPOOL} import -f ${POOL_NAME} || fail 8
${ZPOOL} status ${POOL_NAME} >${TMP_FILE2} || fail 9
cmp ${TMP_FILE1} ${TMP_FILE2} || fail 10
# Cleanup the test pool and temporary files
${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 -d || fail 11
rm -f ${TMP_FILE1} ${TMP_FILE2} || fail 12
${ZFS_SH} -u || fail 13
pass
}
run_test 2 "scan disks for pools to import"
zconfig_zvol_device_stat() {
local EXPECT=$1
local POOL_NAME=/dev/zvol/$2
local ZVOL_NAME=/dev/zvol/$3
local SNAP_NAME=/dev/zvol/$4
local CLONE_NAME=/dev/zvol/$5
local COUNT=0
# Briefly delay for udev
udev_trigger
# Pool exists
stat ${POOL_NAME} &>/dev/null && let COUNT=$COUNT+1
# Volume and partitions
stat ${ZVOL_NAME} &>/dev/null && let COUNT=$COUNT+1
stat ${ZVOL_NAME}-part1 &>/dev/null && let COUNT=$COUNT+1
stat ${ZVOL_NAME}-part2 &>/dev/null && let COUNT=$COUNT+1
# Snapshot with partitions
stat ${SNAP_NAME} &>/dev/null && let COUNT=$COUNT+1
stat ${SNAP_NAME}-part1 &>/dev/null && let COUNT=$COUNT+1
stat ${SNAP_NAME}-part2 &>/dev/null && let COUNT=$COUNT+1
# Clone with partitions
stat ${CLONE_NAME} &>/dev/null && let COUNT=$COUNT+1
stat ${CLONE_NAME}-part1 &>/dev/null && let COUNT=$COUNT+1
stat ${CLONE_NAME}-part2 &>/dev/null && let COUNT=$COUNT+1
if [ $EXPECT -ne $COUNT ]; then
return 1
fi
return 0
}
# zpool import/export device check
# (1 volume, 2 partitions, 1 snapshot, 1 clone)
test_3() {
local POOL_NAME=tank
local ZVOL_NAME=volume
local SNAP_NAME=snap
local CLONE_NAME=clone
local FULL_ZVOL_NAME=${POOL_NAME}/${ZVOL_NAME}
local FULL_SNAP_NAME=${POOL_NAME}/${ZVOL_NAME}@${SNAP_NAME}
local FULL_CLONE_NAME=${POOL_NAME}/${CLONE_NAME}
local TMP_CACHE=`mktemp -p /tmp zpool.cache.XXXXXXXX`
# Create a pool, volume, partition, snapshot, and clone.
${ZFS_SH} zfs="spa_config_path=${TMP_CACHE}" || fail 1
${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 || fail 2
${ZFS} create -V 100M ${FULL_ZVOL_NAME} || fail 3
label /dev/zvol/${FULL_ZVOL_NAME} msdos || fail 4
partition /dev/zvol/${FULL_ZVOL_NAME} primary 1% 50% || fail 4
partition /dev/zvol/${FULL_ZVOL_NAME} primary 50% 100% || fail 4
${ZFS} snapshot ${FULL_SNAP_NAME} || fail 5
${ZFS} clone ${FULL_SNAP_NAME} ${FULL_CLONE_NAME} || fail 6
# Verify the devices were created
zconfig_zvol_device_stat 10 ${POOL_NAME} ${FULL_ZVOL_NAME} \
${FULL_SNAP_NAME} ${FULL_CLONE_NAME} || fail 7
# Export the pool
${ZPOOL} export ${POOL_NAME} || fail 8
# verify the devices were removed
zconfig_zvol_device_stat 0 ${POOL_NAME} ${FULL_ZVOL_NAME} \
${FULL_SNAP_NAME} ${FULL_CLONE_NAME} || fail 9
# Import the pool, wait 1 second for udev
${ZPOOL} import ${POOL_NAME} || fail 10
# Verify the devices were created
zconfig_zvol_device_stat 10 ${POOL_NAME} ${FULL_ZVOL_NAME} \
${FULL_SNAP_NAME} ${FULL_CLONE_NAME} || fail 11
# Destroy the pool and consequently the devices
${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 -d || fail 12
# verify the devices were removed
zconfig_zvol_device_stat 0 ${POOL_NAME} ${FULL_ZVOL_NAME} \
${FULL_SNAP_NAME} ${FULL_CLONE_NAME} || fail 13
${ZFS_SH} -u || fail 14
rm -f ${TMP_CACHE} || fail 15
pass
}
run_test 3 "zpool import/export device"
# zpool insmod/rmmod device check (1 volume, 1 snapshot, 1 clone)
test_4() {
POOL_NAME=tank
ZVOL_NAME=volume
SNAP_NAME=snap
CLONE_NAME=clone
FULL_ZVOL_NAME=${POOL_NAME}/${ZVOL_NAME}
FULL_SNAP_NAME=${POOL_NAME}/${ZVOL_NAME}@${SNAP_NAME}
FULL_CLONE_NAME=${POOL_NAME}/${CLONE_NAME}
TMP_CACHE=`mktemp -p /tmp zpool.cache.XXXXXXXX`
# Create a pool, volume, snapshot, and clone
${ZFS_SH} zfs="spa_config_path=${TMP_CACHE}" || fail 1
${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 || fail 2
${ZFS} create -V 100M ${FULL_ZVOL_NAME} || fail 3
label /dev/zvol/${FULL_ZVOL_NAME} msdos || fail 4
partition /dev/zvol/${FULL_ZVOL_NAME} primary 1% 50% || fail 4
partition /dev/zvol/${FULL_ZVOL_NAME} primary 50% 100% || fail 4
${ZFS} snapshot ${FULL_SNAP_NAME} || fail 5
${ZFS} clone ${FULL_SNAP_NAME} ${FULL_CLONE_NAME} || fail 6
# Verify the devices were created
zconfig_zvol_device_stat 10 ${POOL_NAME} ${FULL_ZVOL_NAME} \
${FULL_SNAP_NAME} ${FULL_CLONE_NAME} || fail 7
# Unload the modules
${ZFS_SH} -u || fail 8
# Verify the devices were removed
zconfig_zvol_device_stat 0 ${POOL_NAME} ${FULL_ZVOL_NAME} \
${FULL_SNAP_NAME} ${FULL_CLONE_NAME} || fail 9
# Load the modules, wait 1 second for udev
${ZFS_SH} zfs="spa_config_path=${TMP_CACHE}" || fail 10
# Verify the devices were created
zconfig_zvol_device_stat 10 ${POOL_NAME} ${FULL_ZVOL_NAME} \
${FULL_SNAP_NAME} ${FULL_CLONE_NAME} || fail 11
# Destroy the pool and consequently the devices
${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 -d || fail 12
# Verify the devices were removed
zconfig_zvol_device_stat 0 ${POOL_NAME} ${FULL_ZVOL_NAME} \
${FULL_SNAP_NAME} ${FULL_CLONE_NAME} || fail 13
${ZFS_SH} -u || fail 14
rm -f ${TMP_CACHE} || fail 15
pass
}
run_test 4 "zpool insmod/rmmod device"
# ZVOL volume sanity check
test_5() {
local POOL_NAME=tank
local ZVOL_NAME=fish
local FULL_NAME=${POOL_NAME}/${ZVOL_NAME}
local SRC_DIR=/bin/
local TMP_CACHE=`mktemp -p /tmp zpool.cache.XXXXXXXX`
# Create a pool and volume.
${ZFS_SH} zfs="spa_config_path=${TMP_CACHE}" || fail 1
${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raid0 || fail 2
${ZFS} create -V 800M ${FULL_NAME} || fail 3
label /dev/zvol/${FULL_NAME} msdos || fail 4
partition /dev/zvol/${FULL_NAME} primary 1 -1 || fail 4
format /dev/zvol/${FULL_NAME}-part1 ext2 || fail 5
# Mount the ext2 filesystem and copy some data to it.
mkdir -p /tmp/${ZVOL_NAME}-part1 || fail 6
mount /dev/zvol/${FULL_NAME}-part1 /tmp/${ZVOL_NAME}-part1 || fail 7
cp -RL ${SRC_DIR} /tmp/${ZVOL_NAME}-part1 || fail 8
sync
# Verify the copied files match the original files.
diff -ur ${SRC_DIR} /tmp/${ZVOL_NAME}-part1${SRC_DIR} \
&>/dev/null || fail 9
# Remove the files, umount, destroy the volume and pool.
rm -Rf /tmp/${ZVOL_NAME}-part1${SRC_DIR}* || fail 10
umount /tmp/${ZVOL_NAME}-part1 || fail 11
rmdir /tmp/${ZVOL_NAME}-part1 || fail 12
${ZFS} destroy ${FULL_NAME} || fail 13
${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 -d || fail 14
${ZFS_SH} -u || fail 15
rm -f ${TMP_CACHE} || fail 16
pass
}
run_test 5 "zvol+ext2 volume"
# ZVOL snapshot sanity check
test_6() {
local POOL_NAME=tank
local ZVOL_NAME=fish
local SNAP_NAME=pristine
local FULL_ZVOL_NAME=${POOL_NAME}/${ZVOL_NAME}
local FULL_SNAP_NAME=${POOL_NAME}/${ZVOL_NAME}@${SNAP_NAME}
local SRC_DIR=/bin/
local TMP_CACHE=`mktemp -p /tmp zpool.cache.XXXXXXXX`
# Create a pool and volume.
${ZFS_SH} zfs="spa_config_path=${TMP_CACHE}" || fail 1
${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raid0 || fail 2
${ZFS} create -V 800M ${FULL_ZVOL_NAME} || fail 3
label /dev/zvol/${FULL_ZVOL_NAME} msdos || fail 4
partition /dev/zvol/${FULL_ZVOL_NAME} primary 1 -1 || fail 4
format /dev/zvol/${FULL_ZVOL_NAME}-part1 ext2 || fail 5
# Mount the ext2 filesystem and copy some data to it.
mkdir -p /tmp/${ZVOL_NAME}-part1 || fail 6
mount /dev/zvol/${FULL_ZVOL_NAME}-part1 /tmp/${ZVOL_NAME}-part1 \
|| fail 7
# Snapshot the pristine ext2 filesystem and mount it read-only.
${ZFS} snapshot ${FULL_SNAP_NAME} || fail 8
wait_udev /dev/zvol/${FULL_SNAP_NAME}-part1 30 || fail 8
mkdir -p /tmp/${SNAP_NAME}-part1 || fail 9
mount /dev/zvol/${FULL_SNAP_NAME}-part1 /tmp/${SNAP_NAME}-part1 \
&>/dev/null || fail 10
# Copy to original volume
cp -RL ${SRC_DIR} /tmp/${ZVOL_NAME}-part1 || fail 11
sync
# Verify the copied files match the original files,
# and the copied files do NOT appear in the snapshot.
diff -ur ${SRC_DIR} /tmp/${ZVOL_NAME}-part1${SRC_DIR} \
&>/dev/null || fail 12
diff -ur ${SRC_DIR} /tmp/${SNAP_NAME}-part1${SRC_DIR} \
&>/dev/null && fail 13
# umount, destroy the snapshot, volume, and pool.
umount /tmp/${SNAP_NAME}-part1 || fail 14
rmdir /tmp/${SNAP_NAME}-part1 || fail 15
${ZFS} destroy ${FULL_SNAP_NAME} || fail 16
umount /tmp/${ZVOL_NAME}-part1 || fail 17
rmdir /tmp/${ZVOL_NAME}-part1 || fail 18
${ZFS} destroy ${FULL_ZVOL_NAME} || fail 19
${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 -d || fail 20
${ZFS_SH} -u || fail 21
rm -f ${TMP_CACHE} || fail 22
pass
}
run_test 6 "zvol+ext2 snapshot"
# ZVOL clone sanity check
test_7() {
local POOL_NAME=tank
local ZVOL_NAME=fish
local SNAP_NAME=pristine
local CLONE_NAME=clone
local FULL_ZVOL_NAME=${POOL_NAME}/${ZVOL_NAME}
local FULL_SNAP_NAME=${POOL_NAME}/${ZVOL_NAME}@${SNAP_NAME}
local FULL_CLONE_NAME=${POOL_NAME}/${CLONE_NAME}
local SRC_DIR=/bin/
local TMP_CACHE=`mktemp -p /tmp zpool.cache.XXXXXXXX`
# Create a pool and volume.
${ZFS_SH} zfs="spa_config_path=${TMP_CACHE}" || fail 1
${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 || fail 2
${ZFS} create -V 300M ${FULL_ZVOL_NAME} || fail 3
label /dev/zvol/${FULL_ZVOL_NAME} msdos || fail 4
partition /dev/zvol/${FULL_ZVOL_NAME} primary 1 -1 || fail 4
format /dev/zvol/${FULL_ZVOL_NAME}-part1 ext2 || fail 5
# Mount the ext2 filesystem and copy some data to it.
mkdir -p /tmp/${ZVOL_NAME}-part1 || fail 6
mount /dev/zvol/${FULL_ZVOL_NAME}-part1 /tmp/${ZVOL_NAME}-part1 \
|| fail 7
# Snapshot the pristine ext2 filesystem and mount it read-only.
${ZFS} snapshot ${FULL_SNAP_NAME} || fail 8
wait_udev /dev/zvol/${FULL_SNAP_NAME}-part1 30 || fail 8
mkdir -p /tmp/${SNAP_NAME}-part1 || fail 9
mount /dev/zvol/${FULL_SNAP_NAME}-part1 \
/tmp/${SNAP_NAME}-part1 &>/dev/null || fail 10
# Copy to original volume.
cp -RL ${SRC_DIR} /tmp/${ZVOL_NAME}-part1 || fail 11
sync
# Verify the copied files match the original files,
# and the copied files do NOT appear in the snapshot.
diff -ur ${SRC_DIR} /tmp/${ZVOL_NAME}-part1${SRC_DIR} \
&>/dev/null || fail 12
diff -ur ${SRC_DIR} /tmp/${SNAP_NAME}-part1${SRC_DIR} \
&>/dev/null && fail 13
# Clone from the original pristine snapshot
${ZFS} clone ${FULL_SNAP_NAME} ${FULL_CLONE_NAME} || fail 14
wait_udev /dev/zvol/${FULL_CLONE_NAME}-part1 30 || fail 14
mkdir -p /tmp/${CLONE_NAME}-part1 || fail 15
mount /dev/zvol/${FULL_CLONE_NAME}-part1 \
/tmp/${CLONE_NAME}-part1 || fail 16
# Verify the clone matches the pristine snapshot,
# and the files copied to the original volume are NOT there.
diff -ur /tmp/${SNAP_NAME}-part1 /tmp/${CLONE_NAME}-part1 \
&>/dev/null || fail 17
diff -ur /tmp/${ZVOL_NAME}-part1 /tmp/${CLONE_NAME}-part1 \
&>/dev/null && fail 18
# Copy to cloned volume.
cp -RL ${SRC_DIR} /tmp/${CLONE_NAME}-part1 || fail 19
sync
# Verify the clone matches the modified original volume.
diff -ur /tmp/${ZVOL_NAME}-part1 /tmp/${CLONE_NAME}-part1 \
&>/dev/null || fail 20
# umount, destroy the snapshot, volume, and pool.
umount /tmp/${CLONE_NAME}-part1 || fail 21
rmdir /tmp/${CLONE_NAME}-part1 || fail 22
${ZFS} destroy ${FULL_CLONE_NAME} || fail 23
umount /tmp/${SNAP_NAME}-part1 || fail 24
rmdir /tmp/${SNAP_NAME}-part1 || fail 25
${ZFS} destroy ${FULL_SNAP_NAME} || fail 26
umount /tmp/${ZVOL_NAME}-part1 || fail 27
rmdir /tmp/${ZVOL_NAME}-part1 || fail 28
${ZFS} destroy ${FULL_ZVOL_NAME} || fail 29
${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 -d || fail 30
${ZFS_SH} -u || fail 31
rm -f ${TMP_CACHE} || fail 32
pass
}
run_test 7 "zvol+ext2 clone"
# Send/Receive sanity check
test_8() {
local POOL_NAME1=tank1
local POOL_NAME2=tank2
local ZVOL_NAME=fish
local SNAP_NAME=snap
local FULL_ZVOL_NAME1=${POOL_NAME1}/${ZVOL_NAME}
local FULL_ZVOL_NAME2=${POOL_NAME2}/${ZVOL_NAME}
local FULL_SNAP_NAME1=${POOL_NAME1}/${ZVOL_NAME}@${SNAP_NAME}
local FULL_SNAP_NAME2=${POOL_NAME2}/${ZVOL_NAME}@${SNAP_NAME}
local SRC_DIR=/bin/
local TMP_CACHE=`mktemp -p /tmp zpool.cache.XXXXXXXX`
# Create two pools and a volume
${ZFS_SH} zfs="spa_config_path=${TMP_CACHE}" || fail 1
${ZPOOL_CREATE_SH} -p ${POOL_NAME1} -c lo-raidz2 || fail 2
${ZPOOL_CREATE_SH} -p ${POOL_NAME2} -c lo-raidz2 || fail 2
${ZFS} create -V 300M ${FULL_ZVOL_NAME1} || fail 3
label /dev/zvol/${FULL_ZVOL_NAME1} msdos || fail 4
partition /dev/zvol/${FULL_ZVOL_NAME1} primary 1 -1 || fail 4
format /dev/zvol/${FULL_ZVOL_NAME1}-part1 ext2 || fail 5
# Mount the ext2 filesystem and copy some data to it.
mkdir -p /tmp/${FULL_ZVOL_NAME1}-part1 || fail 6
mount /dev/zvol/${FULL_ZVOL_NAME1}-part1 \
/tmp/${FULL_ZVOL_NAME1}-part1 || fail 7
cp -RL ${SRC_DIR} /tmp/${FULL_ZVOL_NAME1}-part1 || fail 8
sync || fail 9
# Snapshot the ext2 filesystem so it may be sent.
${ZFS} snapshot ${FULL_SNAP_NAME1} || fail 11
wait_udev /dev/zvol/${FULL_SNAP_NAME1} 30 || fail 11
# Send/receive the snapshot from POOL_NAME1 to POOL_NAME2
(${ZFS} send ${FULL_SNAP_NAME1} | \
${ZFS} receive ${FULL_ZVOL_NAME2}) || fail 12
wait_udev /dev/zvol/${FULL_ZVOL_NAME2}-part1 30 || fail 12
# Mount the sent ext2 filesystem.
mkdir -p /tmp/${FULL_ZVOL_NAME2}-part1 || fail 13
mount /dev/zvol/${FULL_ZVOL_NAME2}-part1 \
/tmp/${FULL_ZVOL_NAME2}-part1 || fail 14
# Verify the contents of the volumes match
diff -ur /tmp/${FULL_ZVOL_NAME1}-part1 /tmp/${FULL_ZVOL_NAME2}-part1 \
&>/dev/null || fail 15
# Umount, destroy the volume and pool.
umount /tmp/${FULL_ZVOL_NAME1}-part1 || fail 16
umount /tmp/${FULL_ZVOL_NAME2}-part1 || fail 17
rmdir /tmp/${FULL_ZVOL_NAME1}-part1 || fail 18
rmdir /tmp/${FULL_ZVOL_NAME2}-part1 || fail 19
rmdir /tmp/${POOL_NAME1} || fail 20
rmdir /tmp/${POOL_NAME2} || fail 21
${ZFS} destroy ${FULL_SNAP_NAME1} || fail 22
${ZFS} destroy ${FULL_SNAP_NAME2} || fail 23
${ZFS} destroy ${FULL_ZVOL_NAME1} || fail 24
${ZFS} destroy ${FULL_ZVOL_NAME2} || fail 25
${ZPOOL_CREATE_SH} -p ${POOL_NAME1} -c lo-raidz2 -d || fail 26
${ZPOOL_CREATE_SH} -p ${POOL_NAME2} -c lo-raidz2 -d || fail 27
${ZFS_SH} -u || fail 28
rm -f ${TMP_CACHE} || fail 29
pass
}
run_test 8 "zfs send/receive"
# zpool event sanity check
test_9() {
local POOL_NAME=tank
local ZVOL_NAME=fish
local FULL_NAME=${POOL_NAME}/${ZVOL_NAME}
local TMP_CACHE=`mktemp -p /tmp zpool.cache.XXXXXXXX`
local TMP_EVENTS=`mktemp -p /tmp zpool.events.XXXXXXXX`
# Create a pool and volume.
${ZFS_SH} zfs="spa_config_path=${TMP_CACHE}" || fail 1
${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 || fail 2
${ZFS} create -V 300M ${FULL_NAME} || fail 3
# Dump the events, there should be at least 5 lines.
${ZPOOL} events >${TMP_EVENTS} || fail 4
EVENTS=`wc -l ${TMP_EVENTS} | cut -f1 -d' '`
[ $EVENTS -lt 5 ] && fail 5
# Clear the events and ensure there are none.
${ZPOOL} events -c >/dev/null || fail 6
${ZPOOL} events >${TMP_EVENTS} || fail 7
EVENTS=`wc -l ${TMP_EVENTS} | cut -f1 -d' '`
[ $EVENTS -gt 1 ] && fail 8
${ZFS} destroy ${FULL_NAME} || fail 9
${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 -d || fail 10
${ZFS_SH} -u || fail 11
rm -f ${TMP_CACHE} || fail 12
rm -f ${TMP_EVENTS} || fail 13
pass
}
run_test 9 "zpool events"
zconfig_add_vdev() {
local POOL_NAME=$1
local TYPE=$2
local DEVICE=$3
local TMP_FILE1=`mktemp`
local TMP_FILE2=`mktemp`
local TMP_FILE3=`mktemp`
BASE_DEVICE=`basename ${DEVICE}`
${ZPOOL} status ${POOL_NAME} >${TMP_FILE1}
${ZPOOL} add -f ${POOL_NAME} ${TYPE} ${DEVICE} 2>/dev/null || return 1
${ZPOOL} status ${POOL_NAME} >${TMP_FILE2}
diff ${TMP_FILE1} ${TMP_FILE2} > ${TMP_FILE3}
[ `wc -l ${TMP_FILE3}|${AWK} '{print $1}'` -eq 3 ] || return 1
PARENT_VDEV=`tail -2 ${TMP_FILE3} | head -1 | ${AWK} '{print $NF}'`
case $TYPE in
cache)
[ "${PARENT_VDEV}" = "${TYPE}" ] || return 1
;;
log)
[ "${PARENT_VDEV}" = "logs" ] || return 1
;;
esac
if ! tail -1 ${TMP_FILE3} |
egrep -q "^>[[:space:]]+${BASE_DEVICE}[[:space:]]+ONLINE" ; then
return 1
fi
rm -f ${TMP_FILE1} ${TMP_FILE2} ${TMP_FILE3}
return 0
}
# zpool add and remove sanity check
test_10() {
local POOL_NAME=tank
local TMP_CACHE=`mktemp -p /tmp zpool.cache.XXXXXXXX`
local TMP_FILE1=`mktemp`
local TMP_FILE2=`mktemp`
if [ ${SCSI_DEBUG} -eq 0 ] || [ ${HAVE_LSSCSI} -eq 0 ] ; then
skip
return
fi
test `${LSMOD} | grep -c scsi_debug` -gt 0 && \
(${RMMOD} scsi_debug || exit 1)
/sbin/modprobe scsi_debug dev_size_mb=128 ||
die "Error $? creating scsi_debug device"
udev_trigger
SDDEVICE=`${LSSCSI}|${AWK} '/scsi_debug/ { print $6; exit }'`
BASE_SDDEVICE=`basename $SDDEVICE`
# Create a pool
${ZFS_SH} zfs="spa_config_path=${TMP_CACHE}" || fail 1
${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 || fail 2
${ZPOOL} status ${POOL_NAME} >${TMP_FILE1} || fail 3
# Add and remove a cache vdev by full path
zconfig_add_vdev ${POOL_NAME} cache ${SDDEVICE} || fail 4
${ZPOOL} remove ${POOL_NAME} ${SDDEVICE} || fail 5
${ZPOOL} status ${POOL_NAME} >${TMP_FILE2} || fail 6
cmp ${TMP_FILE1} ${TMP_FILE2} || fail 7
sleep 1
# Add and remove a cache vdev by shorthand path
zconfig_add_vdev ${POOL_NAME} cache ${BASE_SDDEVICE} || fail 8
${ZPOOL} remove ${POOL_NAME} ${BASE_SDDEVICE} || fail 9
${ZPOOL} status ${POOL_NAME} >${TMP_FILE2} || fail 10
cmp ${TMP_FILE1} ${TMP_FILE2} || fail 11
sleep 1
# Add and remove a log vdev
zconfig_add_vdev ${POOL_NAME} log ${BASE_SDDEVICE} || fail 12
${ZPOOL} remove ${POOL_NAME} ${BASE_SDDEVICE} || fail 13
${ZPOOL} status ${POOL_NAME} >${TMP_FILE2} || fail 14
cmp ${TMP_FILE1} ${TMP_FILE2} || fail 15
${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 -d || fail 16
${ZFS_SH} -u || fail 17
${RMMOD} scsi_debug || fail 18
rm -f ${TMP_FILE1} ${TMP_FILE2} ${TMP_CACHE} || fail 19
pass
}
run_test 10 "zpool add/remove vdev"
exit 0
Jump to Line
Something went wrong with that request. Please try again.