new files

.BSG_MANYCORE_ROOT

@@ -0,0 +1 @@
+bsg_manycore root

testbenches/common/v/bsg_nonsynth_manycore_monitor.v

@@ -0,0 +1,62 @@
+
+module bsg_nonsynth_manycore_monitor #(parameter xcord_width_p="inv"
+                                       ,parameter ycord_width_p="inv"
+                                       ,parameter addr_width_p="inv"
+                                       ,parameter data_width_p="inv"
+                                       ,parameter num_channels_p="inv"
+                                       ,parameter packet_width_lp = 6+xcord_width_p+ycord_width_p+addr_width_p+data_width_p
+				       ,parameter max_cycles_p=1_000_000
+                              )
+   (input clk_i
+    ,input reset_i
+    ,input [num_channels_p-1:0][packet_width_lp-1:0] packet_i
+    ,input [num_channels_p-1:0] valid_i
+    , input finish_i
+    );
+
+  typedef struct packed {
+    logic [5:0]               op;
+    logic [addr_width_p-1:0]  addr;
+    logic [data_width_p-1:0]  data;
+    logic [ycord_width_p-1:0]   y_cord;
+    logic [xcord_width_p-1:0]   x_cord;
+  } bsg_vscale_remote_packet_s;
+
+   logic [39:0]                 trace_count;
+
+   bsg_cycle_counter #(.width_p(40)) bcc (.clk(clk_i),.reset_i(reset_i),.ctr_r_o(trace_count));
+
+   always_ff @(negedge clk_i)
+     if (trace_count > max_cycles_p)
+       begin
+          $display("## TIMEOUT reached max_cycles_p = %x",max_cycles_p);
+          $finish();
+       end
+
+   bsg_vscale_remote_packet_s [num_channels_p-1:0] pkt_cast;
+   assign pkt_cast = packet_i;
+
+   genvar                       i;
+
+   for (i = 0; i < num_channels_p; i=i+1)
+     begin: rof
+        always_ff @(negedge clk_i)
+	  if (reset_i == 0)
+          begin
+             if (valid_i[i] | finish_i)
+               begin
+		  unique case (pkt_cast[i].addr[19:0])
+		    20'hDEAD_0:
+		      if (pkt_cast[i].data == 32'hDEAD_DEED)
+			begin
+			   $display("## RECEIVED FINISH PACKET at I/O %x on cycle 0x%x",i,trace_count);
+			   $finish();
+			end
+		    default:
+		      $display("## received I/O device %x, addr %x, data %x",i,pkt_cast[i].addr, pkt_cast[i].data);
+		  endcase
+               end
+          end
+     end : rof
+endmodule
+