Permalink
Branch: master
Find file Copy path
Fetching contributors…
Cannot retrieve contributors at this time
67 lines (52 sloc) 3.36 KB

CrazyBee F4 DX Pro

CrazyBee F4 DX Pro front CrazyBee F4 DX Pro back

Description

CrazyBee F4 DX Pro flight controller is a Highly integrated board(Receiver/4in1 ESC/OSD/Current Sensor) for 1~2S Whoop brushless racing drone.

MCU, Sensors and Features

Hardware and Features

  • MCU: STM32F411CEU6 (100MHZ, 512K FLASH)
  • IMU: MPU6000 (SPI)
  • OSD: Betaflight OSD
  • Battery Voltage Sensor: yes
  • Power supply: 1-2S battery input (DC 3.5-8.7V) -Built-in 5V 1A Buck / Boost with LC filter
  • Integrated Current sensor:Max 28A,Current meter scale set to 1175
  • Built-in Serial-based DSM2/DSMX compatible satellite receiver(UART2 RX)
  • Integrated inverter for sbus(when use external rx) in UART1 RX
  • Integrated 4x Blheli_s ESC: Max 5A per ESC(EMF8BB21F16G)
  • ESC Connector: 3-pin, PicoBlade 1.25mm pitch
  • Beeper output: 2-pin, soldering pad
  • 4 Rx Indicating LEDs: 2 x red and 2 x white
  • Board size: 28.5 * 28.5mm

Resource mapping

Label Pin Timer DMA Default Note
MPU6000_INT_EXTI PA1
MPU6000_CS_PIN PA4 SPI1
MPU6000_SCK_PIN PA5 SPI1
MPU6000_MISO_PIN PA6 SPI1
MPU6000_MOSI_PIN PA7 SPI1
OSD_CS_PIN PB12 SPI2
OSD_SCK_PIN PB13 SPI2
OSD_MISO_PIN PB14 SPI2
OSD_MOSI_PIN PB15 SPI2
PWM1 PB8 TIM2, CH3
PWM2 PB9 TIM4, CH1
PWM3 PA3 TIM4, CH2
PWM4 PA2 TIM4, CH3
VBAT_ADC_PIN PB0 ADC1
CURRENT_ADC_PIN PB1 ADC1
BEEPER PC15
UART1 TX PA9
UART1 RX PA10
UART2 TX PA2
UART2 RX PA3 connect to built-in DSMX receiver

Manufacturers and Distributors

Designers

Maintainers

FAQ & Known Issues

Other Resources

  • User Manual: Will add soon...