New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Cant activate/configure LED on Omnibus Target 3.5.1 #6773

Closed
ps915 opened this Issue Sep 16, 2018 · 5 comments

Comments

Projects
None yet
3 participants
@ps915
Copy link

ps915 commented Sep 16, 2018

I update the Tiny Brushless "ET100" from ldarc.com from 3.1.7 to 3.5.1 but i cant activate the LED Feature (not via GUI and also not via CLI)

I noticed, that the resources have changed. Here is a resource dump of the 3.1.7 where the LED worked:

# Betaflight / OMNIBUS 3.1.7 Apr  3 2017 / 22:14:20 (e1c4b5c)
name ps915
resource BEEPER 1 C15
resource MOTOR 1 B08
resource MOTOR 2 B09
resource MOTOR 3 A03
resource MOTOR 4 A02
resource MOTOR 5 B07
resource MOTOR 6 B06
resource MOTOR 7 NONE
resource MOTOR 8 NONE
resource MOTOR 9 NONE
resource MOTOR 10 NONE
resource MOTOR 11 NONE
resource MOTOR 12 NONE
resource SERVO 1 NONE
resource SERVO 2 NONE
resource SERVO 3 NONE
resource SERVO 4 NONE
resource SERVO 5 NONE
resource SERVO 6 NONE
resource SERVO 7 NONE
resource SERVO 8 NONE
resource PPM 1 B04
resource PWM 1 NONE
resource PWM 2 NONE
resource PWM 3 NONE
resource PWM 4 NONE
resource PWM 5 NONE
resource PWM 6 NONE
resource PWM 7 NONE
resource PWM 8 NONE
resource LED_STRIP 1 A08
resource SERIAL_TX 1 A09
resource SERIAL_TX 2 A14
resource SERIAL_TX 3 B10
resource SERIAL_TX 4 NONE
resource SERIAL_TX 5 NONE
resource SERIAL_TX 6 NONE
resource SERIAL_TX 7 NONE
resource SERIAL_TX 8 NONE
resource SERIAL_TX 9 NONE
resource SERIAL_TX 10 NONE
resource SERIAL_TX 11 NONE
resource SERIAL_TX 12 NONE
resource SERIAL_RX 1 A10
resource SERIAL_RX 2 A15
resource SERIAL_RX 3 B11
resource SERIAL_RX 4 NONE
resource SERIAL_RX 5 NONE
resource SERIAL_RX 6 NONE
resource SERIAL_RX 7 NONE
resource SERIAL_RX 8 NONE
resource SERIAL_RX 9 NONE
resource SERIAL_RX 10 NONE
resource SERIAL_RX 11 NONE
resource SERIAL_RX 12 NONE

Its resource A08. After installing a fresh (full chip erase) OMNIBUS Firmware 3.5.1, i noticed, that the resource changed to:

# resource stock 3.5.1
resource LED 1 B03
resource TRANSPONDER 1 A08

But LED nor TRANSPONDER Features are not activated. I then tried to activate the LED Featrue cia GUI. Did not worked. Then i tried to change the resources:

resource Transponder 1 none
resource LED 1 A08

But in the end i cant activate the LED Feature at all.

@jflyper

This comment has been minimized.

Copy link
Contributor

jflyper commented Sep 16, 2018

@ps915
LED strip support has been dropped from F3 targets due to flash size shortage.

Btw, the resource you are fiddling with, LED, is not a LED strip but the onboard status LED.

@jflyper jflyper closed this Sep 16, 2018

@ps915

This comment has been minimized.

Copy link
Author

ps915 commented Sep 16, 2018

Ah, damn your right! Thanks :( Whats the last release with LED support?

@jflyper

This comment has been minimized.

Copy link
Contributor

jflyper commented Sep 16, 2018

I believe it was 3.5.0.

@mikeller

This comment has been minimized.

Copy link
Member

mikeller commented Sep 16, 2018

3.4.1 was the last version of OMNIBUS with LED_STRIP support:

mikeller@pc:~/git/betaflight$ git diff 3.4.1 3.5.0  -- src/main/target/OMNIBUS
diff --git a/src/main/target/OMNIBUS/target.h b/src/main/target/OMNIBUS/target.h
index 3c6a8646f..309ce2fd4 100644
--- a/src/main/target/OMNIBUS/target.h
+++ b/src/main/target/OMNIBUS/target.h
@@ -29,6 +29,12 @@
 #undef USE_ITERM_RELAX
 #undef USE_RC_SMOOTHING_FILTER
 
+#undef USE_LED_STRIP
+
+#undef USE_HUFFMAN
+#undef USE_PINIO
+#undef USE_PINIOBOX
+
 #undef USE_TELEMETRY_HOTT
 #undef USE_TELEMETRY_MAVLINK
 #undef USE_TELEMETRY_LTM
[...]
@ps915

This comment has been minimized.

Copy link
Author

ps915 commented Sep 16, 2018

Danke Michael! :)

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment