Fetching latest commit…
Cannot retrieve the latest commit at this time
|Failed to load latest commit information.|
Name: tcpcopy It is an online TCP duplication tool and can be used for testing (using netlink and raw sockets). Description: It can help you find bugs without deploying your server software on your production servers.It can also be used to do smoke testing against your products. For example, when you want to migrate your web server from Apache to Nginx, tcpcopy can help you test it. Apache is running online, while tcpcopy can copy the TCP flows from Apache to Nginx. To Nginx, the TCP flows are just forwarding to it. This will not affect Apache at all except cost a little network bandwidth and CPU load. Scenarios: 1) Distributed stress testing Use tcpcopy to copy real-world data to stress test your server software. Bugs that only can be produced in high-stress situations can be found. 2) Hot backup It is very suitable for backup tasks if connections are short-lived. The request loss ratio is quite low (e.g. 0.00001). 3) Online testing Prove the new system is stable and find bugs that only occur in the real world. 4) Benchmark Do performance benchmark. For instance, you can use tcpcopy to compare the performance of Apache and Nginx. Usage: 1) Install a) download the source code from github: git clone http://github.com/wangbin579/tcpcopy b) sh autogen.sh c) ./configure d) make e) make install 2) Run: a) on the source host (root privilege is required): tcpcopy version <0.5 ./tcpcopy local_ip1[:local_ip2:...] local_port remote_ip remote_port tcpcopy version >=0.5 ./tcpcopy -x local_port-remote_ip:remote_port b) on the target host (root privilege is required): modprobe ip_queue # if not running iptables -I OUTPUT -p tcp --sport port -j QUEUE # if not set ./interception (version <0.5) or ./intercept (>=0.5) Example: Suppose there are two online hosts, 18.104.22.168 and 22.214.171.124. And 126.96.36.199 is the target host (similar to the online hosts). Port 12321 is used both as local port and remote port. We use tcpcopy to test if 188.8.131.52 can process 2X requests than a host can serve. Here we use tcpcopy version 0.4 to perform the above test task. 1) on the target host (184.108.40.206) # modprobe ip_queue # if not run up # iptables -I OUTPUT -p tcp --sport 12321 -j QUEUE # if not set # ./interception 2) online host (220.127.116.11) # ./tcpcopy 18.104.22.168 12321 22.214.171.124 12321 3) online host(126.96.36.199) # ./tcpcopy 188.8.131.52 12321 184.108.40.206 12321 CPU load and memory usage is as follows: 220.127.116.11: 11124 adrun 15 0 193m 146m 744 S 18.6 7.3 495:31.56 asyn_server 11281 root 15 0 65144 40m 1076 S 12.3 2.0 0:47.89 tcpcopy 18.104.22.168: 16855 adrun 15 0 98.7m 55m 744 S 21.6 2.7 487:49.51 asyn_server 16429 root 15 0 41156 17m 1076 S 14.0 0.9 0:33.63 tcpcopy 22.214.171.124: 25609 root 15 0 76892 59m 764 S 49.6 2.9 63:03.14 asyn_server 20184 root 15 0 5624 4232 292 S 17.0 0.2 0:52.82 interception Access log analysis: 126.96.36.199: $ grep 'Tue 11:08' access_0913_11.log | wc -l 89316, 1489 reqs/sec 188.8.131.52: $ grep 'Tue 11:08' access_0913_11.log | wc -l 89309, 1488 reqs/sec 184.108.40.206: $ grep 'Tue 11:08' access_0913_11.log | wc -l 178175, 2969 reqs/sec request loss ratio: (89316 + 89309 - 178175) / (89316 + 89309) = 0.25% Clearly, the target host can process 2X of requests a source host can serve. How is the CPU load? Well, tcpcopy on online host 220.127.116.11 used 12.3%, host 18.104.22.168 used 14%, while interception on the target host consumed about 17%. We can see that the CPU load is low here, and so is the memory usage. Note: 1) It is tested on Linux only (kernal 2.6 or above). 2) Tcpcopy may lose packets hence lose requests. 3) tcpcopy is single-threaded now. 4) Root privilege is required. 5) Check error.log if you encounter some problems and feel free to report it to us(email@example.com).