C Python Other
Fetching latest commit…
Cannot retrieve the latest commit at this time.
|Failed to load latest commit information.|
Last updated 5/29/2011 This directory will contain a stable version for the code for the OctoROACH robot, intended to provide an "out of the box" working code base. Files: --------- firmware/ - contains the C code firmware for the robot, and the MPLAB IDE project files. lib/ - C code library of modules for the octoroach firmware python/ - python code for controlling the robot from a PC, and examples. doc/ - documentation on firmware and python code. Instructions: ------------- To build the OctoRoACH firmware project, you will need to also get the 'imageproc-lib' library, which can be found here: https://github.com/biomimetics/imageproc-lib.git To get the source without using git: - Go to https://github.com/biomimetics/octoroach and click the "ZIP" button, to download a ZIP file of the whole code package. Unzip this file, and rename the directory to just 'octoroach'. - Go to https://github.com/biomimetics/imageproc-lib and get the ZIP for the imageproc-lib code. Extract, and rename directory to 'imageproc-lib'. To clone using git: mkdir development cd development git clone git://github.com/biomimetics/octoroach.git git clone git://github.com/biomimetics/imageproc-lib.git This will clone the two projects with a relative directory structure that is required by the included IDE project file. For the exact code that was shipped on the Motile built OctoRoACH robots, a "v1.0" tag will exist in the github repositories. Building: --------- Open the firmware/octoroach.mcp file with MPLAB, and build. The code should build with no errors and no warnings. NOTE: The IDE may ask you about the path of your gcc, as, and ld executables; it should automatically find the correct path corresponding to your installed compiler, and will prompt you to switch on the first build. Firmware: ----------- The firmware for the OctoRoACH robot is implemented in plain C, to be run on the dsPIC33g microcontroller on the ImageProc2 v2.4 board. The code has been developed and tested with the MPLAB C30 compiler, under and academic use license. A project file for use with the MPLAB IDE is provided; code was programmed to the board with a MicroChip ICD3 tool. The source code is in two locations: - lib/ contains code broken into modules, aligned to specific functions of the robot. See code comments for more information. - firmware/ contains the MPLAB project files - firmware/source/ contians the main.c, which largely just setups up the board and other modules, and cmd.c and cmd.h, which describe the command set that the robot will repond to over the 15.4 radio. *** Because the command set for the robot is not standardized or enforced in any way, you MUST manually synchronize the listings in command.py and cmd.c/cmd.h if any modifications are made. The project is delivered with a compiler directive error purposely inserted into a header file, where the radio settings defined. It is REQUIRED that the user modifies these settings, and comments out the error directive. There are several compile-time defines available: __RADIO_HIGH_DATA_RATE : operates the 15.4 radio in 500Kbps mode and accordingly reduces some feedback delays. Only use this option if you are using the Fearing Lab 802.15.4 USB dongle at 230Kbaud. __DFMEM_8MBIT / __DFMEM_16MBIT / __DFMEM_32MBIT: This option must correspond to the size of the AT45 serial flash chip installed on the boad. It is required to have at least one of these options defined. NOTE: The Motile-built OctoRoACH robots were shipped without a programming connector installed. You will have to manually add a connector to upload firmware to the robot. Python: --------- Running the OctoRoACH code will require you to install a python interpreter, as well as several libraries. For academic applications, a bundled product by Enthought (www.enthought.com) will contain most of these libraries. You MUST install a 32bit version. 64bit python is known to not have sufficient library support to work. Specifically, you will need: * pySerial * numPy * xbee-python - shared.py is used as a "global" module, to elide the need for long lists of "global" keywords in other scripts. *** IMPORTANT: Configuration of the COM port and baud rate of your Xbee/15.4 dongle is set by variables in shared.py - callbackFunc.py contains the callback function used by the xbee-python library. It is kept in a separate file such that any additions or changes will be synchronized across all the user's python scripts. A dictionary of packet formats is also located in callbackFunc.py. If you are adding a command to the robot, you must add the callback handler here, as well as the packet format. - command.py contains the command codes for the robot. *** Because the command set for the robot is not standardized or enforced in any way, you MUST manually synchronize the listings in command.py and cmd.c/cmd.h if any modifications are made. Radio: ------------ The ImageProc2 v2.4 board uses an 802.15.4 radio for communication. Operation has been tested with an XBee module and the Fearing Lab 802.15.4 USB dongle. The user is required to review and change the radio settings before the firmware project will compile. No binaries images with pre-set radio addresses are provided at this time.