New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Windows Versions #5

Closed
bitbeans opened this Issue Sep 21, 2015 · 141 comments

Comments

Projects
None yet
@bitbeans
Owner

bitbeans commented Sep 21, 2015

Tested on:

  • Windows 7 32 bit
  • Windows 7 64 bit
  • Windows 8.1 32 bit
  • Windows 8.1 64 bit
  • Windows 10 32 bit
  • Windows 10 64 bit
@gnavascues

This comment has been minimized.

Show comment
Hide comment
@gnavascues

gnavascues Sep 24, 2015

It does not work for me (windows 10 64 bit). Nothing happens after opening Simple DNSCrypt (¿?)

It does not work for me (windows 10 64 bit). Nothing happens after opening Simple DNSCrypt (¿?)

@bitbeans

This comment has been minimized.

Show comment
Hide comment
@bitbeans

bitbeans Sep 24, 2015

Owner

Does the application not start?

After opening, you need to click on the Primary DNSCrypt Resolver "switch control", this will install the windows service. And then just click on your network cards you want to use DNSCrypt.

install

Owner

bitbeans commented Sep 24, 2015

Does the application not start?

After opening, you need to click on the Primary DNSCrypt Resolver "switch control", this will install the windows service. And then just click on your network cards you want to use DNSCrypt.

install

@gnavascues

This comment has been minimized.

Show comment
Hide comment
@gnavascues

gnavascues Sep 24, 2015

The application not start. I think It could be a .NET installation problem (¿?)

The application not start. I think It could be a .NET installation problem (¿?)

@bitbeans

This comment has been minimized.

Show comment
Hide comment
@bitbeans

bitbeans Sep 24, 2015

Owner

So .NET 4.5 is installed?

Did you use the installer (msi)?

Owner

bitbeans commented Sep 24, 2015

So .NET 4.5 is installed?

Did you use the installer (msi)?

@gnavascues

This comment has been minimized.

Show comment
Hide comment
@gnavascues

gnavascues Sep 24, 2015

I think .NET 4.5 is installed because of I use "dnscrypt-winclient" without problems.

I use the installer (msi)

I think .NET 4.5 is installed because of I use "dnscrypt-winclient" without problems.

I use the installer (msi)

@bitbeans

This comment has been minimized.

Show comment
Hide comment
@bitbeans

bitbeans Sep 24, 2015

Owner

dnscrypt-winclient targets .NET 2.0

So there is no error? Did you run it as administrator?

Owner

bitbeans commented Sep 24, 2015

dnscrypt-winclient targets .NET 2.0

So there is no error? Did you run it as administrator?

@gnavascues

This comment has been minimized.

Show comment
Hide comment
@gnavascues

gnavascues Sep 24, 2015

There is no error. The application not start. Nothing happens.
Yes. I have tried to run it as administrator.

There is no error. The application not start. Nothing happens.
Yes. I have tried to run it as administrator.

@bitbeans

This comment has been minimized.

Show comment
Hide comment
@bitbeans

bitbeans Sep 24, 2015

Owner

Maybe you should try to uninstall dnscrypt-proxy first.

So go to your old dnscrypt-proxy installation directory and run: dnscrypt-proxy.exe --uninstall
This should clean up the registry and remove the old windows service.

After this, try again to start Simple DNSCrypt.

Owner

bitbeans commented Sep 24, 2015

Maybe you should try to uninstall dnscrypt-proxy first.

So go to your old dnscrypt-proxy installation directory and run: dnscrypt-proxy.exe --uninstall
This should clean up the registry and remove the old windows service.

After this, try again to start Simple DNSCrypt.

@gnavascues

This comment has been minimized.

Show comment
Hide comment
@gnavascues

gnavascues Sep 24, 2015

I opened dnscrypt-winclient.exe before opening Simple DNSCrypt and I click on uninstall option.
After It I opened Microsoft Edge and I have not access to Internet because of dnscrypt-proxy does not work.
I change my DNS Server from 127.0.0.1 to Obtain It automatically for my Internet connection.
I opened Microsoft Edge and I have access to Internet.
After all I start Simple DNSCrypt and nothing happens. Same problem.

I opened dnscrypt-winclient.exe before opening Simple DNSCrypt and I click on uninstall option.
After It I opened Microsoft Edge and I have not access to Internet because of dnscrypt-proxy does not work.
I change my DNS Server from 127.0.0.1 to Obtain It automatically for my Internet connection.
I opened Microsoft Edge and I have access to Internet.
After all I start Simple DNSCrypt and nothing happens. Same problem.

@bitbeans

This comment has been minimized.

Show comment
Hide comment
@bitbeans

bitbeans Sep 24, 2015

Owner

Do have VS2013 or VS2015 to run it from source?

Owner

bitbeans commented Sep 24, 2015

Do have VS2013 or VS2015 to run it from source?

@gnavascues

This comment has been minimized.

Show comment
Hide comment
@gnavascues

gnavascues Sep 24, 2015

I think that I have not VS2013 or VS2015 to do It.

I think that I have not VS2013 or VS2015 to do It.

@bitbeans

This comment has been minimized.

Show comment
Hide comment
@bitbeans

bitbeans Sep 24, 2015

Owner

After uninstalling the old service, can you check the existing of the registry entry (should not exist):

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\dnscrypt-proxy
Owner

bitbeans commented Sep 24, 2015

After uninstalling the old service, can you check the existing of the registry entry (should not exist):

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\dnscrypt-proxy
@gnavascues

This comment has been minimized.

Show comment
Hide comment
@gnavascues

gnavascues Sep 24, 2015

OK. I will try It.

OK. I will try It.

@gnavascues

This comment has been minimized.

Show comment
Hide comment
@gnavascues

gnavascues Sep 24, 2015

I have check the existing of the registry entry and It does not exist.
After It I have tried to install and run Simple DNSCrypt and the application not start and nothing happens.

I have check the existing of the registry entry and It does not exist.
After It I have tried to install and run Simple DNSCrypt and the application not start and nothing happens.

@bitbeans

This comment has been minimized.

Show comment
Hide comment
@bitbeans

bitbeans Sep 24, 2015

Owner

Hmm, maybe your Antivirus is blocking something? Sandbox? Can you try to deactivate it for some minutes?

Owner

bitbeans commented Sep 24, 2015

Hmm, maybe your Antivirus is blocking something? Sandbox? Can you try to deactivate it for some minutes?

@gnavascues

This comment has been minimized.

Show comment
Hide comment
@gnavascues

gnavascues Sep 24, 2015

I have installed Avast Internet Security 2015.
OK. I will try It.

I have installed Avast Internet Security 2015.
OK. I will try It.

@gnavascues

This comment has been minimized.

Show comment
Hide comment
@gnavascues

gnavascues Sep 24, 2015

I deactivate it and same problem with Simple DNSCrypt.

I deactivate it and same problem with Simple DNSCrypt.

@gnavascues

This comment has been minimized.

Show comment
Hide comment
@gnavascues

gnavascues Sep 24, 2015

I have running Windows Firewall, Maybe It ?

I have running Windows Firewall, Maybe It ?

@gnavascues

This comment has been minimized.

Show comment
Hide comment
@gnavascues

gnavascues Sep 24, 2015

I have installed Malwarebytes Anti-Exploit Free ...

I have installed Malwarebytes Anti-Exploit Free ...

@bitbeans

This comment has been minimized.

Show comment
Hide comment
@bitbeans

bitbeans Sep 24, 2015

Owner

Is there anything in the Application log in the Event Viewer?

Owner

bitbeans commented Sep 24, 2015

Is there anything in the Application log in the Event Viewer?

@gnavascues

This comment has been minimized.

Show comment
Hide comment
@gnavascues

gnavascues Sep 24, 2015

One problem opening "Cortana" ... I do not know what I am looking for.

One problem opening "Cortana" ... I do not know what I am looking for.

@bitbeans

This comment has been minimized.

Show comment
Hide comment
@bitbeans

bitbeans Sep 24, 2015

Owner

oh sorry "cortana" i just read costura :O

Owner

bitbeans commented Sep 24, 2015

oh sorry "cortana" i just read costura :O

@g11229418

This comment has been minimized.

Show comment
Hide comment
@g11229418

g11229418 Sep 25, 2015

First of, thanks for the app, will be of great use.
However, it's not working (either, apparently.) on Windows 7 Ultimate x64.

I did turn off the original service, turned AV off, everything, but the app just doesn't work.
(Throws a werfault at my face.)

First of, thanks for the app, will be of great use.
However, it's not working (either, apparently.) on Windows 7 Ultimate x64.

I did turn off the original service, turned AV off, everything, but the app just doesn't work.
(Throws a werfault at my face.)

@bitbeans

This comment has been minimized.

Show comment
Hide comment
@bitbeans

bitbeans Sep 25, 2015

Owner

i will check this, thanks for reporting

Owner

bitbeans commented Sep 25, 2015

i will check this, thanks for reporting

@bitbeans

This comment has been minimized.

Show comment
Hide comment
@bitbeans

bitbeans Sep 25, 2015

Owner

Hey, can you two download and unzip this: https://bitbeans.de/SimpleDnsCrypt_debug.zip replace the SimpleDnsCrypt.exe in:

C:\Program Files (x86)\bitbeans\Simple DNSCrypt

This should catch any error on startup and bring up a MessageBox (hopefully)
(There could be a warning, because it`s not signed)

Owner

bitbeans commented Sep 25, 2015

Hey, can you two download and unzip this: https://bitbeans.de/SimpleDnsCrypt_debug.zip replace the SimpleDnsCrypt.exe in:

C:\Program Files (x86)\bitbeans\Simple DNSCrypt

This should catch any error on startup and bring up a MessageBox (hopefully)
(There could be a warning, because it`s not signed)

@g11229418

This comment has been minimized.

Show comment
Hide comment
@g11229418

g11229418 Sep 25, 2015

Well now that I replaced, the application started working.
I'm going to try and report on any errors, thanks for the update.

Well now that I replaced, the application started working.
I'm going to try and report on any errors, thanks for the update.

@bitbeans

This comment has been minimized.

Show comment
Hide comment
@bitbeans

bitbeans Sep 25, 2015

Owner

really? and no error?
can "re-download" it again? :)

Owner

bitbeans commented Sep 25, 2015

really? and no error?
can "re-download" it again? :)

@gnavascues

This comment has been minimized.

Show comment
Hide comment
@gnavascues

gnavascues Sep 25, 2015

Ok. I will try It.

Ok. I will try It.

@gnavascues

This comment has been minimized.

Show comment
Hide comment
@gnavascues

gnavascues Sep 25, 2015

An error message appear.
I will send It to you (bibeans) attached as a JPG image at one email.

An error message appear.
I will send It to you (bibeans) attached as a JPG image at one email.

@g11229418

This comment has been minimized.

Show comment
Hide comment
@g11229418

g11229418 Sep 25, 2015

@bitbeans I confirm on my end.
I redownloaded the old version (Both from the website and the repo.), crashes upon launching.
Downloading the link you sent earlier opens the app, and I'm able to use it without problems.

Two little notes though, probably just unfinished features but I still want to list them:

  • Trying to navigate the resolver with the arrow keys just "loads" the next server.
    (The first time I tried it didn't change the current server, it just allowed me to see the server's IP, DNSSEC/Logs status, public key etc, now it just changes it to my current one, idk why.)
  • Second resolver not available.

@bitbeans I confirm on my end.
I redownloaded the old version (Both from the website and the repo.), crashes upon launching.
Downloading the link you sent earlier opens the app, and I'm able to use it without problems.

Two little notes though, probably just unfinished features but I still want to list them:

  • Trying to navigate the resolver with the arrow keys just "loads" the next server.
    (The first time I tried it didn't change the current server, it just allowed me to see the server's IP, DNSSEC/Logs status, public key etc, now it just changes it to my current one, idk why.)
  • Second resolver not available.
@bitbeans

This comment has been minimized.

Show comment
Hide comment
@bitbeans

bitbeans Sep 25, 2015

Owner

@gnavascues i have not received an email yet.
@g11229418 the second resolver is not yet supported, i`am waiting for a pending dnscrypt-proxy update, it is already in work.

Owner

bitbeans commented Sep 25, 2015

@gnavascues i have not received an email yet.
@g11229418 the second resolver is not yet supported, i`am waiting for a pending dnscrypt-proxy update, it is already in work.

@gnavascues

This comment has been minimized.

Show comment
Hide comment
@gnavascues

gnavascues Sep 25, 2015

Ok. Excuse me. I sent a reply to the last email I received from here.
I attach the error image here now.
error

Ok. Excuse me. I sent a reply to the last email I received from here.
I attach the error image here now.
error

@g11229418

This comment has been minimized.

Show comment
Hide comment
@g11229418

g11229418 Sep 26, 2015

Alright, a few more things I noticed. (Still on Window 7 x64)

  • Clicking the "turn off" button in the service doesn't actually turn it off. (You have to --uninstall from dnscrypt-proxy.exe.)
  • For some reasons, you can turn on the service but it won't actually work. (Though taking the same server from the list and using it directly with dnscrypt-proxy.exe works.)

Alright, a few more things I noticed. (Still on Window 7 x64)

  • Clicking the "turn off" button in the service doesn't actually turn it off. (You have to --uninstall from dnscrypt-proxy.exe.)
  • For some reasons, you can turn on the service but it won't actually work. (Though taking the same server from the list and using it directly with dnscrypt-proxy.exe works.)
@umbrageous

This comment has been minimized.

Show comment
Hide comment
@umbrageous

umbrageous Sep 29, 2015

Really good - thanks. One helpful thing for the future would be an ability to be able to unmark/hide and reorder entries to the resolvers list. For example, I prefer not to use Cisco resolvers, and it would be great not to have them (or whichever resolvers one chooses) not visible.

Thanks for the work!

Really good - thanks. One helpful thing for the future would be an ability to be able to unmark/hide and reorder entries to the resolvers list. For example, I prefer not to use Cisco resolvers, and it would be great not to have them (or whichever resolvers one chooses) not visible.

Thanks for the work!

@af001

This comment has been minimized.

Show comment
Hide comment
@af001

af001 Sep 30, 2015

I have the same issue running Windows 10 64bit as a VM in VMware Fusion7. As a reference, attached is the debug output from the MessageBox.

screen shot 2015-09-29 at 11 08 49 pm

af001 commented Sep 30, 2015

I have the same issue running Windows 10 64bit as a VM in VMware Fusion7. As a reference, attached is the debug output from the MessageBox.

screen shot 2015-09-29 at 11 08 49 pm

@bitbeans

This comment has been minimized.

Show comment
Hide comment
@bitbeans

bitbeans Sep 30, 2015

Owner

thanks for reporting this, is the error only come up in the VM?

Owner

bitbeans commented Sep 30, 2015

thanks for reporting this, is the error only come up in the VM?

@af001

This comment has been minimized.

Show comment
Hide comment
@af001

af001 Sep 30, 2015

Yes, the error shows up as soon as I try to run it as administrator in the VM.

af001 commented Sep 30, 2015

Yes, the error shows up as soon as I try to run it as administrator in the VM.

@zQueal

This comment has been minimized.

Show comment
Hide comment
@zQueal

zQueal Oct 3, 2015

Not working on Windows 7 x64 SP1.

After enabling DNSCrypt on the LAN the primary DNSCrypt service won't enable (slider remains in the off position). Running as administrator does not fix the issue.

6zi5nmf


I was able to resolve this issue. I had used the non-GUI version of DNSCrypt before I found this software to manage it for me. I uninstalled it, however, for whatever reason it didn't completely uninstall.

I redownloaded the DNSCrypt-Proxy and executed:

dnscrypt-proxy.exe --unistall

then repaired the Simple DNSCrypt software from the MSI. Everything worked fine after that.

zQueal commented Oct 3, 2015

Not working on Windows 7 x64 SP1.

After enabling DNSCrypt on the LAN the primary DNSCrypt service won't enable (slider remains in the off position). Running as administrator does not fix the issue.

6zi5nmf


I was able to resolve this issue. I had used the non-GUI version of DNSCrypt before I found this software to manage it for me. I uninstalled it, however, for whatever reason it didn't completely uninstall.

I redownloaded the DNSCrypt-Proxy and executed:

dnscrypt-proxy.exe --unistall

then repaired the Simple DNSCrypt software from the MSI. Everything worked fine after that.

@bitbeans

This comment has been minimized.

Show comment
Hide comment
@bitbeans

bitbeans Oct 3, 2015

Owner

Thanks for reporting this.

Owner

bitbeans commented Oct 3, 2015

Thanks for reporting this.

@verlain3

This comment has been minimized.

Show comment
Hide comment
@verlain3

verlain3 Oct 12, 2015

Same happens to me, i installed the latest .msi but when i click on it, it does nothing, doesn't open.

If i replace your SimpleDnsCrypt.exe in the installation directory, it shows this:

sem titulo

Windows 10 Pro x64
Any help?

Same happens to me, i installed the latest .msi but when i click on it, it does nothing, doesn't open.

If i replace your SimpleDnsCrypt.exe in the installation directory, it shows this:

sem titulo

Windows 10 Pro x64
Any help?

@bitbeans

This comment has been minimized.

Show comment
Hide comment
@bitbeans

bitbeans Dec 31, 2016

Owner

I`am working on 0.3.8. Stay tuned :)

Owner

bitbeans commented Dec 31, 2016

I`am working on 0.3.8. Stay tuned :)

@virtualizado

This comment has been minimized.

Show comment
Hide comment
@virtualizado

virtualizado Dec 31, 2016

  1. WHen we are browsing the DNS LIST in simpleDnsCrypt, we like to CHECK if there is a DNSSEC OK in the servers. But when we click a name to see, it already changes and makes us wait 5 seconds for every dns name that we want to check the DNSSEC options in dns list.

  2. EVERY SERVER says DNS QUERIES ARE NOT BEING CONSISTENTLY ANSWERED http://imgur.com/a/0nFdN

  3. When a DNSSEC server is NOT WORKING, as i check on DNSBENCH, simplednscrypt still says it`s ok and working.

  1. WHen we are browsing the DNS LIST in simpleDnsCrypt, we like to CHECK if there is a DNSSEC OK in the servers. But when we click a name to see, it already changes and makes us wait 5 seconds for every dns name that we want to check the DNSSEC options in dns list.

  2. EVERY SERVER says DNS QUERIES ARE NOT BEING CONSISTENTLY ANSWERED http://imgur.com/a/0nFdN

  3. When a DNSSEC server is NOT WORKING, as i check on DNSBENCH, simplednscrypt still says it`s ok and working.

@virtualizado

This comment has been minimized.

Show comment
Hide comment
@virtualizado

virtualizado Dec 31, 2016

Thanks for the fast answer, bitbeans!!!

Thanks for the fast answer, bitbeans!!!

@agungindrawan

This comment has been minimized.

Show comment
Hide comment
@agungindrawan

agungindrawan Jan 4, 2017

Hi, I would like to report a problem. I'm using Simple DNSCrypt 0.3.7 (IPv6 disabled) on Windows 10 x64 Version 1607.

  1. Whenever I enabled [Use TCP port 443], DNS lookup will fail. I already tried disabling my firewall (TinyWall) and exit Kaspersky Antivirus (not merely disabling it) but DNS lookup will still fail.
  2. There is no [DNS response cache] option in [Available extensions] as described in Simple DNSCrypt homepage.

Any help will be much appreciated, especially issue no 1.
Thank you.

simple-dnscrypt-0 3 7-ext

agungindrawan commented Jan 4, 2017

Hi, I would like to report a problem. I'm using Simple DNSCrypt 0.3.7 (IPv6 disabled) on Windows 10 x64 Version 1607.

  1. Whenever I enabled [Use TCP port 443], DNS lookup will fail. I already tried disabling my firewall (TinyWall) and exit Kaspersky Antivirus (not merely disabling it) but DNS lookup will still fail.
  2. There is no [DNS response cache] option in [Available extensions] as described in Simple DNSCrypt homepage.

Any help will be much appreciated, especially issue no 1.
Thank you.

simple-dnscrypt-0 3 7-ext

@bitbeans

This comment has been minimized.

Show comment
Hide comment
@bitbeans

bitbeans Jan 4, 2017

Owner

@agungindrawan maybe Kaspersky Antivirus is blocking something.
0.3.9 now includes the announced cache plugin

Owner

bitbeans commented Jan 4, 2017

@agungindrawan maybe Kaspersky Antivirus is blocking something.
0.3.9 now includes the announced cache plugin

@bitbeans bitbeans closed this Jan 4, 2017

@bitbeans bitbeans reopened this Jan 4, 2017

@George-R-O

This comment has been minimized.

Show comment
Hide comment
@George-R-O

George-R-O Jan 4, 2017

Regarding Kaspersky, KIS 2017, using v 0.3.7 and v 0.3.8, I cannot reach any website when KIS 2017 is installed. Pausing and exiting KIS 2017 makes no difference ONLY AFTER uninstalling KIS 2017 will SimpleDnsCrypt work as it should. Testing at https://browserleaks.com/webrtc proves it's working OK.

I have an ongoing problem report with Kaspersky and yesterday sent a full diagnostic report plus trace logs of the issue. I'll report back when I get a response.

Meantime, after upgrading to 0.3.9, now I can't even select the active ethernet card!

George-R-O commented Jan 4, 2017

Regarding Kaspersky, KIS 2017, using v 0.3.7 and v 0.3.8, I cannot reach any website when KIS 2017 is installed. Pausing and exiting KIS 2017 makes no difference ONLY AFTER uninstalling KIS 2017 will SimpleDnsCrypt work as it should. Testing at https://browserleaks.com/webrtc proves it's working OK.

I have an ongoing problem report with Kaspersky and yesterday sent a full diagnostic report plus trace logs of the issue. I'll report back when I get a response.

Meantime, after upgrading to 0.3.9, now I can't even select the active ethernet card!

@jedisct1

This comment has been minimized.

Show comment
Hide comment
@jedisct1

jedisct1 Jan 4, 2017

There have been multiple discussions on Kaspersky's forums about this.

This is a known bug in KIS 2017, that they have finally fixed in KIS 2018. People having received the beta version of KIS 2018 confirmed that Simple DNSCrypt works.

Meanwhile, the workaround suggested by the Kaspersky support team is to "disable analysis of encrypted traffic". I don't remember where that knob sits in the KIS settings as I don't use it. Given the level of attention that part of KIS has received regarding security (see https://bugs.chromium.org/p/project-zero/issues/detail?id=978 ), disabling that feature may actually improve your overall security no matter what.

jedisct1 commented Jan 4, 2017

There have been multiple discussions on Kaspersky's forums about this.

This is a known bug in KIS 2017, that they have finally fixed in KIS 2018. People having received the beta version of KIS 2018 confirmed that Simple DNSCrypt works.

Meanwhile, the workaround suggested by the Kaspersky support team is to "disable analysis of encrypted traffic". I don't remember where that knob sits in the KIS settings as I don't use it. Given the level of attention that part of KIS has received regarding security (see https://bugs.chromium.org/p/project-zero/issues/detail?id=978 ), disabling that feature may actually improve your overall security no matter what.

@George-R-O

This comment has been minimized.

Show comment
Hide comment
@George-R-O

George-R-O Jan 4, 2017

Thanks jedisct1,

I tried setting KIS 2017 "disable analysis of encrypted traffic" but still not working - perhaps I need to reboot / reinstall?

KIS 2018? Really.... we've just made it into 2018! :)

On the otherhand my problem with V 0.3.9 not allowing selection of the active ethernet connection has gone....

Thanks jedisct1,

I tried setting KIS 2017 "disable analysis of encrypted traffic" but still not working - perhaps I need to reboot / reinstall?

KIS 2018? Really.... we've just made it into 2018! :)

On the otherhand my problem with V 0.3.9 not allowing selection of the active ethernet connection has gone....

@agungindrawan

This comment has been minimized.

Show comment
Hide comment
@agungindrawan

agungindrawan Jan 4, 2017

I'm sorry I'm not clear about which version of Kaspersky Antivirus I'm currently using. I'm currently using 2016 version. I too have problem when KAV auto-updated to 2017. DNS-Crypt simply not working in KAV/KIS 2017. I opened issues in My Kaspersky portal but after several suggested fixes from Kaspersky tech support simply not working, I'm downgrading to KAV 2016 and disabled auto-update.

DNS lookup will resolve normally when TCP setting disabled. This is nslookup output when TCP setting enabled.

DNS request timed out.
timeout was 2 seconds.
Server: UnKnown
Address: 127.0.0.1

Is there is a software I can use to troubleshoot this? It seem dns packet blocked somewhere.

Btw, just updated to 0.3.9, thank you for secondary resolver support :-)

I'm sorry I'm not clear about which version of Kaspersky Antivirus I'm currently using. I'm currently using 2016 version. I too have problem when KAV auto-updated to 2017. DNS-Crypt simply not working in KAV/KIS 2017. I opened issues in My Kaspersky portal but after several suggested fixes from Kaspersky tech support simply not working, I'm downgrading to KAV 2016 and disabled auto-update.

DNS lookup will resolve normally when TCP setting disabled. This is nslookup output when TCP setting enabled.

DNS request timed out.
timeout was 2 seconds.
Server: UnKnown
Address: 127.0.0.1

Is there is a software I can use to troubleshoot this? It seem dns packet blocked somewhere.

Btw, just updated to 0.3.9, thank you for secondary resolver support :-)

@p1nkyy

This comment has been minimized.

Show comment
Hide comment
@p1nkyy

p1nkyy Jan 6, 2017

Latest version kept crashed here. Here's the log from the error message:
Problem signature:
Problem Event Name: CLR20r3
Problem Signature 01: SimpleDnsCrypt.exe
Problem Signature 02: 0.3.9.0
Problem Signature 03: 586ca2e3
Problem Signature 04: mscorlib
Problem Signature 05: 4.0.30319.34209
Problem Signature 06: 534894cc
Problem Signature 07: 254
Problem Signature 08: 10
Problem Signature 09: System.Windows.Markup.XamlParse
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789

I'm in Win 7 64 bit, with Norton Security 22.8.

p1nkyy commented Jan 6, 2017

Latest version kept crashed here. Here's the log from the error message:
Problem signature:
Problem Event Name: CLR20r3
Problem Signature 01: SimpleDnsCrypt.exe
Problem Signature 02: 0.3.9.0
Problem Signature 03: 586ca2e3
Problem Signature 04: mscorlib
Problem Signature 05: 4.0.30319.34209
Problem Signature 06: 534894cc
Problem Signature 07: 254
Problem Signature 08: 10
Problem Signature 09: System.Windows.Markup.XamlParse
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789

I'm in Win 7 64 bit, with Norton Security 22.8.

@bitbeans

This comment has been minimized.

Show comment
Hide comment
@bitbeans

bitbeans Jan 6, 2017

Owner

@p1nkyy do you have .NET 4.6 installed?

Owner

bitbeans commented Jan 6, 2017

@p1nkyy do you have .NET 4.6 installed?

@p1nkyy

This comment has been minimized.

Show comment
Hide comment
@p1nkyy

p1nkyy Jan 6, 2017

@bitbeans No I don't. The latest I have is .NET 4.5.2 Do I have to? I will install then. Trying to install previous ver also didn't work, it keeps closing by itself.

p1nkyy commented Jan 6, 2017

@bitbeans No I don't. The latest I have is .NET 4.5.2 Do I have to? I will install then. Trying to install previous ver also didn't work, it keeps closing by itself.

@bitbeans

This comment has been minimized.

Show comment
Hide comment
@bitbeans

bitbeans Jan 6, 2017

Owner

@p1nkyy 0.3.9 and 0.4.0 requires .NET 4.6

Owner

bitbeans commented Jan 6, 2017

@p1nkyy 0.3.9 and 0.4.0 requires .NET 4.6

@George-R-O

This comment has been minimized.

Show comment
Hide comment
@George-R-O

George-R-O Jan 9, 2017

Official response from Kaspersky Internet Security 2017

Dear customer,
Thank you for your patience.
Our Moscow HQ has confirmed that what you have faced is a known bug in the program, which is due to be resolved in the next major update for Kaspersky.
Unfortunately we do not have a specific time frame for the release but we have tagged this ticket appropriately so that we will let you know once it's available.
We apologize for the inconvenience and please let us know if there's anything else we can assist you with in the meantime.
To reply to this request, you can simply reply to this e-mail leaving the subject line unchanged.
If we do not receive a response from you within 7 days, your request will be considered resolved by our system. If you would like us to leave your request open, you can simply let us know by replying to this e-mail or sending a new reply through My Kaspersky.
Best regards,
Kaspersky Lab Technical Support

Damn I've just purchased a new 5 machine 1 year license!!! :(
Pausing or exiting Kaspersky doesn't fix the problem either ONLY after uninstalling will SimpleDnsCrypt work!!

George-R-O commented Jan 9, 2017

Official response from Kaspersky Internet Security 2017

Dear customer,
Thank you for your patience.
Our Moscow HQ has confirmed that what you have faced is a known bug in the program, which is due to be resolved in the next major update for Kaspersky.
Unfortunately we do not have a specific time frame for the release but we have tagged this ticket appropriately so that we will let you know once it's available.
We apologize for the inconvenience and please let us know if there's anything else we can assist you with in the meantime.
To reply to this request, you can simply reply to this e-mail leaving the subject line unchanged.
If we do not receive a response from you within 7 days, your request will be considered resolved by our system. If you would like us to leave your request open, you can simply let us know by replying to this e-mail or sending a new reply through My Kaspersky.
Best regards,
Kaspersky Lab Technical Support

Damn I've just purchased a new 5 machine 1 year license!!! :(
Pausing or exiting Kaspersky doesn't fix the problem either ONLY after uninstalling will SimpleDnsCrypt work!!

@agungindrawan

This comment has been minimized.

Show comment
Hide comment
@agungindrawan

agungindrawan Jan 10, 2017

@George-R-O Yes, In my case I simply downgraded to 2016 version.

Btw about TCP setting that if enabled will make dns lookup fail, it turns out different resolvers give different results. Several will success, others fails. So if anyone encounters similar problem, hope this helps.

@George-R-O Yes, In my case I simply downgraded to 2016 version.

Btw about TCP setting that if enabled will make dns lookup fail, it turns out different resolvers give different results. Several will success, others fails. So if anyone encounters similar problem, hope this helps.

@inserm94

This comment has been minimized.

Show comment
Hide comment
@inserm94

inserm94 Jan 10, 2017

Hello,

Following the failure of the update of "Simple DNSCrypt" I had to update "framework NET 4.6" (NDP46-KB3045560-Web.exe) which allowed to disable all the parasite services during the update of Framework Net 4.6 ".

OS: Windows 8.1 Pro x64

Installation of "Simple DNSCrypt" "(.msi) was successful.

image

inserm94 commented Jan 10, 2017

Hello,

Following the failure of the update of "Simple DNSCrypt" I had to update "framework NET 4.6" (NDP46-KB3045560-Web.exe) which allowed to disable all the parasite services during the update of Framework Net 4.6 ".

OS: Windows 8.1 Pro x64

Installation of "Simple DNSCrypt" "(.msi) was successful.

image

@virtualizado

This comment has been minimized.

Show comment
Hide comment
@virtualizado

virtualizado Jan 13, 2017

Bitbeans... Lemme insist once more to see if you understand:

After that dual DNS update, Every time i RESTART my windows 7 machineS (even the virtual ones), this is the situation: SERVICES ARE TURNED OFF AFTER RESTART. See? No DNS. No internet. Things that should run automaticly freeze because of that, specially remote jobs. PLUS, when i click to open DNSCRYPT, takes ages to open for the first time.
Windows 7 64 bits, NET framework 4.6.2 in all of them.

image

Second thing, but not sooo urgent, or as important, is that the log is not working well...
In the log file it is, but not inside the log live

image

Third thing, simplednscrypt is a software aimed for people that like to have control over things, and it should never update or communicate with other things than the dns itself without user consent.
Buttons to auto-update dnslist and auto-update program on/off should be there too in my opinion.

For last, if i am a new user, and i want to test all the dns servers from the list, i need to CHANGE ONE BY ONE, i can not pre-select a DNS NAMESERVER just to see IP and if it has DNSSEC, for example, it does CHANGE DNS first. After some seconds to change, THEN i can see if the dnssec option is marked yes or no. Since they are NEW DNS SERVERS people are not used too, it is a hard time to test LATENCY ONE BY ONE.
I need to open DNSBENCH and RUN TEST AGAIN after EVERY DNS SERVER I TEST.

image

And no matter the dns server i chose, in simplednscrypt it always say this:
DNS QUERIES ARE NOT BEING CONSISTELY ANSWERED

image

For people like @pink problems, simplednscrypt should autocheck if things like required net framework version are needed or not. Usually people just download the software and install it. Several friends i recomended simplednscrypt gave up after install because the first run gave an error, but not explaining that they had missing net framework requirement.

virtualizado commented Jan 13, 2017

Bitbeans... Lemme insist once more to see if you understand:

After that dual DNS update, Every time i RESTART my windows 7 machineS (even the virtual ones), this is the situation: SERVICES ARE TURNED OFF AFTER RESTART. See? No DNS. No internet. Things that should run automaticly freeze because of that, specially remote jobs. PLUS, when i click to open DNSCRYPT, takes ages to open for the first time.
Windows 7 64 bits, NET framework 4.6.2 in all of them.

image

Second thing, but not sooo urgent, or as important, is that the log is not working well...
In the log file it is, but not inside the log live

image

Third thing, simplednscrypt is a software aimed for people that like to have control over things, and it should never update or communicate with other things than the dns itself without user consent.
Buttons to auto-update dnslist and auto-update program on/off should be there too in my opinion.

For last, if i am a new user, and i want to test all the dns servers from the list, i need to CHANGE ONE BY ONE, i can not pre-select a DNS NAMESERVER just to see IP and if it has DNSSEC, for example, it does CHANGE DNS first. After some seconds to change, THEN i can see if the dnssec option is marked yes or no. Since they are NEW DNS SERVERS people are not used too, it is a hard time to test LATENCY ONE BY ONE.
I need to open DNSBENCH and RUN TEST AGAIN after EVERY DNS SERVER I TEST.

image

And no matter the dns server i chose, in simplednscrypt it always say this:
DNS QUERIES ARE NOT BEING CONSISTELY ANSWERED

image

For people like @pink problems, simplednscrypt should autocheck if things like required net framework version are needed or not. Usually people just download the software and install it. Several friends i recomended simplednscrypt gave up after install because the first run gave an error, but not explaining that they had missing net framework requirement.

@inserm94

This comment has been minimized.

Show comment
Hide comment
@inserm94

inserm94 Jan 13, 2017

Hello, could you check the configurations from my screenshots below. Do you have the same configurations on your PC?

You must be static IP addressing to force Windows to use the DNSCrypt DNS servers, and be on localhost (127.0.0.1 - 127.0.0.2) on the TCP / IP properties of your Ethernet (physical)

screenshot-github1

screenshot-github2

screenshot-github3

inserm94 commented Jan 13, 2017

Hello, could you check the configurations from my screenshots below. Do you have the same configurations on your PC?

You must be static IP addressing to force Windows to use the DNSCrypt DNS servers, and be on localhost (127.0.0.1 - 127.0.0.2) on the TCP / IP properties of your Ethernet (physical)

screenshot-github1

screenshot-github2

screenshot-github3

@ivodoko

This comment has been minimized.

Show comment
Hide comment
@ivodoko

ivodoko Jan 19, 2017

The latest version (0.4.0) will not start on my machine (Windows 7 64-bit) - trying to start the UI results in a crash. Here are the crash dump files.

ivodoko commented Jan 19, 2017

The latest version (0.4.0) will not start on my machine (Windows 7 64-bit) - trying to start the UI results in a crash. Here are the crash dump files.

@bitbeans

This comment has been minimized.

Show comment
Hide comment
@bitbeans

bitbeans Jan 20, 2017

Owner

@ivodoko try 0.4.1

Owner

bitbeans commented Jan 20, 2017

@ivodoko try 0.4.1

@ivodoko

This comment has been minimized.

Show comment
Hide comment
@ivodoko

ivodoko Jan 31, 2017

@bitbeans Yep, it works now. Thanks! :)

ivodoko commented Jan 31, 2017

@bitbeans Yep, it works now. Thanks! :)

@virtualizado

This comment has been minimized.

Show comment
Hide comment
@virtualizado

virtualizado Feb 6, 2017

Still not solved.
It worked on my win 7 64 bits machines, the service autostart began to fail with the secondary dns version.
Maybe incompatibility with Comodo? Or ADVANCED SYSTEM CARE? I use those 2.
It happens on both host machines as inside virtual machines. I need to manually open the program and start the services before i have DNS.

image

image

image

I get those errors in windows event viewer every startup.
I don't even know if it is working correctly.

virtualizado commented Feb 6, 2017

Still not solved.
It worked on my win 7 64 bits machines, the service autostart began to fail with the secondary dns version.
Maybe incompatibility with Comodo? Or ADVANCED SYSTEM CARE? I use those 2.
It happens on both host machines as inside virtual machines. I need to manually open the program and start the services before i have DNS.

image

image

image

I get those errors in windows event viewer every startup.
I don't even know if it is working correctly.

@FaPrivatliv

This comment has been minimized.

Show comment
Hide comment
@FaPrivatliv

FaPrivatliv Feb 16, 2017

dnscrypt gui status
Hello All,

I just installed version 0.4.1 on my Windows 10 64 laptop and when I click the first network connection connecting directly to my ISP (whose DNS servers I want to replace), it remains grayed out. I don't seen anything in the error logs indicating a problem with this application. I'm not sure what to do next. Below is a screenshot of the GUI. Please let me know what I should do to get this working. Thank you.

FaPrivatliv commented Feb 16, 2017

dnscrypt gui status
Hello All,

I just installed version 0.4.1 on my Windows 10 64 laptop and when I click the first network connection connecting directly to my ISP (whose DNS servers I want to replace), it remains grayed out. I don't seen anything in the error logs indicating a problem with this application. I'm not sure what to do next. Below is a screenshot of the GUI. Please let me know what I should do to get this working. Thank you.

@truthsword

This comment has been minimized.

Show comment
Hide comment
@truthsword

truthsword Apr 4, 2017

Same issue as virtualizado commented on Jan 13, except Win 8.1-64. Each Windows restart I have no connectivity since Primary DNS service button is "off" I checked services and dnscrypt-proxy is set to automatic (and is running).

Also, like virtualizado commented on Feb 6, I have errors (3) in Event Viewer with every restart:

Faulting application name: dnscrypt-proxy.exe, version: 0.0.0.0, time stamp: 0x0003ca00
Faulting module name: dnscrypt-proxy.exe, version: 0.0.0.0, time stamp: 0x0003ca00
Exception code: 0xc0000005
Fault offset: 0x0001d94c
Faulting process id: 0x9e4
Faulting application start time: 0x01d2ad4bb3920081
Faulting application path: D:\Program Files (x86)Simple DNSCrypt\dnscrypt-proxy\dnscrypt-proxy.exe
Faulting module path: D:\Program Files (x86)Simple DNSCrypt\dnscrypt-proxy\dnscrypt-proxy.exe
Report Id: 3999e839-193f-11e7-88cd-6c71d932922e
Faulting package full name:
Faulting package-relative application ID:

If I call up the GUI and switch on Primary DNS service button, then all is well.

I need this to autostart with login.

Same issue as virtualizado commented on Jan 13, except Win 8.1-64. Each Windows restart I have no connectivity since Primary DNS service button is "off" I checked services and dnscrypt-proxy is set to automatic (and is running).

Also, like virtualizado commented on Feb 6, I have errors (3) in Event Viewer with every restart:

Faulting application name: dnscrypt-proxy.exe, version: 0.0.0.0, time stamp: 0x0003ca00
Faulting module name: dnscrypt-proxy.exe, version: 0.0.0.0, time stamp: 0x0003ca00
Exception code: 0xc0000005
Fault offset: 0x0001d94c
Faulting process id: 0x9e4
Faulting application start time: 0x01d2ad4bb3920081
Faulting application path: D:\Program Files (x86)Simple DNSCrypt\dnscrypt-proxy\dnscrypt-proxy.exe
Faulting module path: D:\Program Files (x86)Simple DNSCrypt\dnscrypt-proxy\dnscrypt-proxy.exe
Report Id: 3999e839-193f-11e7-88cd-6c71d932922e
Faulting package full name:
Faulting package-relative application ID:

If I call up the GUI and switch on Primary DNS service button, then all is well.

I need this to autostart with login.

@yidc9

This comment has been minimized.

Show comment
Hide comment
@yidc9

yidc9 Apr 5, 2017

I can not install the SimpleDNSCrypt. The error that I encounter when I am at the middle of setup is:
"A program required for this install to complete could not be run. Contact your support personnel or package vendor."
I have also installed .NET Framework 4.6.2 and am using Windows 8.

yidc9 commented Apr 5, 2017

I can not install the SimpleDNSCrypt. The error that I encounter when I am at the middle of setup is:
"A program required for this install to complete could not be run. Contact your support personnel or package vendor."
I have also installed .NET Framework 4.6.2 and am using Windows 8.

@glnzglnz

This comment has been minimized.

Show comment
Hide comment
@glnzglnz

glnzglnz Apr 10, 2017

Just installed on Win 7 Pro 64-bit and seems to be working.
But is there a manual or guide to the settings? I'm just a real estate lawyer, not a tech wizard like yourself.
EDIT: Also, I went to dnsleaktest.com on both (1) this machine with Simple DNSCrypt and (2) a different machine without. Since I already had the two OpenDNS IPs in my modem-router as static DNS for WAN, and since my choice of Primary Resolver in Simple DNSCrypt is Cisco OpenDNS, the results on both machines are the same: both dnsleaktest.com tests point to an IP owned by OpenDNS. That's certainly good, but how can I test whether Simple DNSCrypt is working? Change the Primary Resolver to something else? Sorry for dumb question.
(By the way, I am surprised that Cisco OpenDNS is not DNSSEC.)
EDIT: FYI - My Visual C++ Redistributables (x86) are 2013 and 2017; I don't have 2015.
EDIT: As noted, my Win 7 Pro is 64-bit. Is there a 64-bit version of Simple DNSCrypt?
Many thanks !!

glnzglnz commented Apr 10, 2017

Just installed on Win 7 Pro 64-bit and seems to be working.
But is there a manual or guide to the settings? I'm just a real estate lawyer, not a tech wizard like yourself.
EDIT: Also, I went to dnsleaktest.com on both (1) this machine with Simple DNSCrypt and (2) a different machine without. Since I already had the two OpenDNS IPs in my modem-router as static DNS for WAN, and since my choice of Primary Resolver in Simple DNSCrypt is Cisco OpenDNS, the results on both machines are the same: both dnsleaktest.com tests point to an IP owned by OpenDNS. That's certainly good, but how can I test whether Simple DNSCrypt is working? Change the Primary Resolver to something else? Sorry for dumb question.
(By the way, I am surprised that Cisco OpenDNS is not DNSSEC.)
EDIT: FYI - My Visual C++ Redistributables (x86) are 2013 and 2017; I don't have 2015.
EDIT: As noted, my Win 7 Pro is 64-bit. Is there a 64-bit version of Simple DNSCrypt?
Many thanks !!

@Zenith-Nadir

This comment has been minimized.

Show comment
Hide comment
@Zenith-Nadir

Zenith-Nadir Apr 30, 2017

Great News with IPv6 in SimpleDnsCrypt ver. 0.4.2; Windows 10 x64, anniversary edition. SUCCESS!
described in the link below showing as "#1":
#1
Zenith-Nadir

Great News with IPv6 in SimpleDnsCrypt ver. 0.4.2; Windows 10 x64, anniversary edition. SUCCESS!
described in the link below showing as "#1":
#1
Zenith-Nadir

@Isabelxxx

This comment has been minimized.

Show comment
Hide comment
@Isabelxxx

Isabelxxx May 8, 2017

"not all the necessary files in dnscrypt proxy folder are found reinstalling the application is recommended"

Net Framework 4.6.2 and Microsoft C++ 2015 x64/x86 (+ older) installed, clean install within VM box.

"not all the necessary files in dnscrypt proxy folder are found reinstalling the application is recommended"

Net Framework 4.6.2 and Microsoft C++ 2015 x64/x86 (+ older) installed, clean install within VM box.

@spamkutu

This comment has been minimized.

Show comment
Hide comment
@spamkutu

spamkutu Nov 1, 2017

Windows 8 support needs, Its not work after 0.4.2 Simple DNSCrypt Instlled with coco so not sure if its possible to install again with coco if deleteted this one and its always ask upgrade but it cannot possible becouse of new requirment .net 4.6.2 ths installed windows 8 support for this latest 4.6.1.

So could you make .net 4.6.1 ver available for the windows 8 (not for 8.1 just for 8) thanks..

spamkutu commented Nov 1, 2017

Windows 8 support needs, Its not work after 0.4.2 Simple DNSCrypt Instlled with coco so not sure if its possible to install again with coco if deleteted this one and its always ask upgrade but it cannot possible becouse of new requirment .net 4.6.2 ths installed windows 8 support for this latest 4.6.1.

So could you make .net 4.6.1 ver available for the windows 8 (not for 8.1 just for 8) thanks..

@spamkutu

This comment has been minimized.

Show comment
Hide comment
@spamkutu

spamkutu Nov 3, 2017

Is is possible to make new version suitable to .net version 4.6.1 or do you know how to install a way to install 4.6.2 or 4.7.1 to windows 8 waiting still and need that much thanks..

spamkutu commented Nov 3, 2017

Is is possible to make new version suitable to .net version 4.6.1 or do you know how to install a way to install 4.6.2 or 4.7.1 to windows 8 waiting still and need that much thanks..

@inserm94

This comment has been minimized.

Show comment
Hide comment
@inserm94

inserm94 Nov 5, 2017

You have to install before an windows update to clean register (Framework) and install Net-Framework 4.6.2. You can also uninstall old Net-Framework and install new Framework here https://support.microsoft.com/en-us/help/3151802/the--net-framework-4-6-2-web-installer-for-windows

inserm94 commented Nov 5, 2017

You have to install before an windows update to clean register (Framework) and install Net-Framework 4.6.2. You can also uninstall old Net-Framework and install new Framework here https://support.microsoft.com/en-us/help/3151802/the--net-framework-4-6-2-web-installer-for-windows

@spamkutu

This comment has been minimized.

Show comment
Hide comment
@spamkutu

spamkutu Nov 7, 2017

Nope its support latest one is 4.6.1 as official way. I heard an noofficial way to install it over windows 8 but dont know how to do if realy existed a way. Currently windows 8 support until 4.6.1 so we couln't install new versions with .net 4.6.2 and up.

spamkutu commented Nov 7, 2017

Nope its support latest one is 4.6.1 as official way. I heard an noofficial way to install it over windows 8 but dont know how to do if realy existed a way. Currently windows 8 support until 4.6.1 so we couln't install new versions with .net 4.6.2 and up.

@mafiozio

This comment has been minimized.

Show comment
Hide comment
@mafiozio

mafiozio Dec 9, 2017

New version 0.4.3 releaed few days ago has stopped working for me. I started to get an error message. I used 0.4.2 before under Win7x64Pro. Here is a screenshot:

https://www.screencast.com/t/62hPWf4h

I installed also "Microsoft Visual C++ Redistributable für Visual Studio 2017", but it does not help.

Any ideas how to solve it?

mafiozio commented Dec 9, 2017

New version 0.4.3 releaed few days ago has stopped working for me. I started to get an error message. I used 0.4.2 before under Win7x64Pro. Here is a screenshot:

https://www.screencast.com/t/62hPWf4h

I installed also "Microsoft Visual C++ Redistributable für Visual Studio 2017", but it does not help.

Any ideas how to solve it?

@lrayze

This comment has been minimized.

Show comment
Hide comment
@lrayze

lrayze Dec 9, 2017

It was working fine but not anymore since yesterday on my Windows 10 Pro Version 1709 Build 16299.64 64 bit.

imagen

lrayze commented Dec 9, 2017

It was working fine but not anymore since yesterday on my Windows 10 Pro Version 1709 Build 16299.64 64 bit.

imagen

@MadScript77

This comment has been minimized.

Show comment
Hide comment
@MadScript77

MadScript77 Dec 19, 2017

The "Block & Blacklist" feature seems to be broken. I tried adding Easylist to it. It said something like 10113 entries were blocked (that seemed odd, since Easylist has around 75K sites listed). So, when I enabled it, I started having problems loading some sites, including Google. I ended up having to reinstall the app to resolve the problem. I am running Windows 7 x64, and I tried both the x86 and x64 builds. They both seem to be exhibiting the same behavior.

The "Block & Blacklist" feature seems to be broken. I tried adding Easylist to it. It said something like 10113 entries were blocked (that seemed odd, since Easylist has around 75K sites listed). So, when I enabled it, I started having problems loading some sites, including Google. I ended up having to reinstall the app to resolve the problem. I am running Windows 7 x64, and I tried both the x86 and x64 builds. They both seem to be exhibiting the same behavior.

@arif-excell

This comment has been minimized.

Show comment
Hide comment
@arif-excell

arif-excell Jan 14, 2018

Please update the url of public resolver list, there is a /v1/ on the new url.
Refer to this : https://github.com/DNSCrypt/dnscrypt-resolvers/blob/master/v1/dnscrypt-resolvers.csv

Please update the url of public resolver list, there is a /v1/ on the new url.
Refer to this : https://github.com/DNSCrypt/dnscrypt-resolvers/blob/master/v1/dnscrypt-resolvers.csv

@bitbeans bitbeans closed this Jan 26, 2018

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment