Skip to content
SteppIR serial controller interface
Python
Branch: master
Clone or download
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Type Name Latest commit message Commit time
Failed to load latest commit information.
LICENSE
README.md
setup.py
steppir.py

README.md

Python interface for SteppIR controller

Control your SDA100 controller using Python!

Build/install instructions

The Python module is installed locally by:

python3 setup.py install --user

Hardware usage instructions

Hook up the computer to the Data OUT port on the controller. See "SDA 100 Controller Operators Manual" (https://consumer.steppir.com/wp-content/uploads/2011/10/operations-manual-SDA-100-rev-2-dec-12.pdf) for details. The controller must be in auto track mode.

Software usage instructions

Set a new frequency and get the current frequency:

import steppir
step = steppir.SteppIR('/dev/ttyUSB0', 9600)
step.set_frequency(14020000)
print(step.get_frequency())
You can’t perform that action at this time.