Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with HTTPS or Subversion.

Download ZIP
Fetching contributors…

Cannot retrieve contributors at this time

988 lines (843 sloc) 34.319 kb
#
# %CopyrightBegin%
#
# Copyright Ericsson AB 1998-2011. All Rights Reserved.
#
# The contents of this file are subject to the Erlang Public License,
# Version 1.1, (the "License"); you may not use this file except in
# compliance with the License. You should have received a copy of the
# Erlang Public License along with this software. If not, it can be
# retrieved online at http://www.erlang.org/.
#
# Software distributed under the License is distributed on an "AS IS"
# basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
# the License for the specific language governing rights and limitations
# under the License.
#
# %CopyrightEnd%
# Toplevel makefile for building the Erlang system
#
.NOTPARALLEL:
# ----------------------------------------------------------------------
# And you'd think that this would be obvious... :-)
SHELL = /bin/sh
# The top directory in which Erlang is unpacked
ERL_TOP = @ERL_TOP@
# OTP release
OTP = OTP-@OTP_REL@
# erts (Erlang RunTime System) version
ERTS = erts-@ERTS_VSN@
# ----------------------------------------------------------------------
#
# The variables below control where Erlang is installed. They are
# configurable (unless otherwise stated). Some of them are best
# changed by giving special arguments to configure instead of changing
# them in this file. Note: If you change them in Makefile, instead of
# Makefile.in your changes will be lost the next time you run
# configure.
#
# prefix from configure, default is /usr/local (must be an absolute path)
prefix = @prefix@
exec_prefix = @exec_prefix@
# Locations where we should install according to configure. These location
# may be prefixed by $(DESTDIR) and/or $(EXTRA_PREFIX) (see below).
bindir = @bindir@
libdir = @libdir@
# Where Erlang/OTP is located
libdir_suffix = /erlang
erlang_libdir = $(libdir)$(libdir_suffix)
erlang_bindir = $(erlang_libdir)/bin
#
# By default we install relative symbolic links for $(ERL_BASE_PUB_FILES)
# from $(bindir) to $(erlang_bindir) as long as they are both prefixed
# by $(exec_prefix) (and are otherwise reasonable). This behavior can be
# overridden by passing BINDIR_SYMLINKS=<HOW>, where <HOW> is either
# absolute or relative.
#
# $ make DESTDIR=<...> install
#
# DESTDIR can be set in case you want to install Erlang in a different
# location than where you have configured it to run. This can be
# useful, e.g. when installing on a server that stores the files with a
# different path than where the clients access them, when building
# rpms, or cross compiling, etc. DESTDIR will prefix the actual
# installation which will only be able to run once the DESTDIR prefix
# has disappeard, e.g. the part after DESTDIR has been packed and
# unpacked without DESTDIR. The name DESTDIR have been chosen since it
# is the GNU coding standard way of doing it.
#
# If INSTALL_PREFIX is set but not DESTDIR, DESTDIR will be set to
# INSTALL_PREFIX. INSTALL_PREFIX has been buggy for a long time. It was
# initially intended to have the same effect as DESTDIR. This effect was,
# however, lost even before it was first released :-( In all released OTP
# versions up to R13B03, INSTALL_PREFIX has behaved as EXTRA_PREFIX do
# today (see below).
ifeq ($(DESTDIR),)
ifneq ($(INSTALL_PREFIX),)
DESTDIR=$(INSTALL_PREFIX)
endif
else
ifneq ($(INSTALL_PREFIX),)
ifneq ($(DESTDIR),$(INSTALL_PREFIX))
$(error Both DESTDIR="$(DESTDIR)" and INSTALL_PREFIX="$(INSTALL_PREFIX)" have been set and have been set differently! Please, only set one of them)
endif
endif
endif
# $ make EXTRA_PREFIX=<...> install
#
# EXTRA_PREFIX behaves exactly as the buggy INSTALL_PREFIX behaved in
# pre R13B04 releases. It adds a prefix to all installation paths which
# will be used by the actuall installation. That is, the installation
# needs to be located at this location when run. This is useful if you
# want to try out the system, running test suites, etc, before doing the
# real install using the configuration you have set up using `configure'.
# A similar thing can be done by overriding `prefix' if only default
# installation directories are used. However, the installation can get
# sprawled out all over the place if the user use `--bindir', `--libdir',
# etc, and it is possible that `prefix' wont have any effect at all. That
# is, it is not at all the same thing as using EXTRA_PREFIX in the
# general case. It is also nice to be able to supply this feature if
# someone should have relied on the old buggy INSTALL_PREFIX.
# The directory in which user executables (ERL_BASE_PUB_FILES) are installed
BINDIR = $(DESTDIR)$(EXTRA_PREFIX)$(bindir)
#
# Erlang base public files
#
ERL_BASE_PUB_FILES=erl erlc epmd run_erl to_erl dialyzer typer escript run_test
# ERLANG_INST_LIBDIR is the top directory where the Erlang installation
# will be located when running.
ERLANG_INST_LIBDIR=$(EXTRA_PREFIX)$(erlang_libdir)
ERLANG_INST_BINDIR= $(ERLANG_INST_LIBDIR)/bin
# ERLANG_LIBDIR is the top directory where the Erlang installation is copied
# during installation. If DESTDIR != "", it cannot be run from this location.
ERLANG_LIBDIR = $(DESTDIR)$(ERLANG_INST_LIBDIR)
# ----------------------------------------------------------------------
# This functionality has been lost along the way... :(
# It could perhaps be nice to reintroduce some day; therefore,
# it is not removed just commented out.
## # The directory in which man pages for above executables are put
## ERL_MAN1DIR = $(DESTDIR)$(EXTRA_PREFIX)@mandir@/man1
## ERL_MAN1EXT = 1
## # The directory in which Erlang private man pages are put. In order
## # not to clutter up the man namespace these are by default put in the
## # Erlang private directory $(ERLANG_LIBDIR)/man (\@erl_mandir\@ is set
## # to $(erlang_libdir)/man). If you want to install the man pages
## # together with the rest give the argument "--disable-erlang-mandir"
## # when you run configure, which will set \@erl_mandir\@ to \@mandir\@.
## # If you want a special suffix on the manpages set ERL_MANEXT to
## # this suffix, e.g. "erl"
## ERL_MANDIR = $(DESTDIR)$(EXTRA_PREFIX)@erl_mandir@
## ERL_MANEXT =
# ----------------------------------------------------------------------
# Must be GNU make!
MAKE = @MAKE_PROG@
# This should be set to the target "arch-vendor-os"
TARGET := @TARGET@
include $(ERL_TOP)/make/target.mk
export TARGET
BOOTSTRAP_ONLY = @BOOTSTRAP_ONLY@
CROSS_COMPILING = @CROSS_COMPILING@
ifeq ($(CROSS_COMPILING),yes)
INSTALL_CROSS = -cross
else
ifneq ($(DESTDIR),)
INSTALL_CROSS = -cross
else
INSTALL_CROSS =
endif
endif
# A BSD compatible install program
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
MKSUBDIRS = ${INSTALL} -d
# Program to create symbolic links
LN_S = @LN_S@
# Ranlib program, if not needed set to e.g. ":"
RANLIB = @RANLIB@
# ----------------------------------------------------------------------
# By default we require an Erlang/OTP of the same release as the one
# we cross compile.
ERL_XCOMP_FORCE_DIFFERENT_OTP = no
# ----------------------------------------------------------------------
#
# The directory where at least the primary bootstrap is placed under.
#
# We need to build to view private files in case we are in clearcase;
# therefore, we don't want BOOTSTRAP_TOP changed.
#
# PRIMARY_BOOTSTRAP_TOP would perhaps have been a better name...
#
override BOOTSTRAP_TOP = $(ERL_TOP)/bootstrap
# BOOTSTRAP_SRC_TOP is normally the same as BOOTSTRAP_TOP but
# it is allowed to be changed
BOOTSTRAP_SRC_TOP = $(BOOTSTRAP_TOP)
# Where to install the bootstrap directory.
#
# Typically one might want to set this to a fast local filesystem, or,
# the default, as ERL_TOP
BOOTSTRAP_ROOT = $(ERL_TOP)
# Directories which you need in the path if you wish to run the
# locally built system. (This can be put in front or back of the path
# depending on which system is preferred.)
LOCAL_PATH = $(ERL_TOP)/erts/bin/$(TARGET):$(ERL_TOP)/erts/bin
ifeq ($(TARGET),win32)
BOOT_PREFIX=$(WIN32_WRAPPER_PATH):$(BOOTSTRAP_ROOT)/bootstrap/bin:
else
BOOT_PREFIX=$(BOOTSTRAP_ROOT)/bootstrap/bin:
endif
# ----------------------------------------------------------------------
# The following is currently only used for determining what to prevent
# usage of during strict install or release.
include $(ERL_TOP)/make/$(TARGET)/otp_ded.mk
CC = @CC@
LD = @LD@
CXX = @CXX@
IBIN_DIR = $(ERL_TOP)/ibin
#
# If $(OTP_STRICT_INSTALL) equals `yes' we prefix the PATH with $(IBIN_DIR)
# when doing `release' or `install'. This directory contains `erlc', `gcc',
# `ld' etc, that unconditionally will fail if used. This is used during the
# daily builds in order to pick up on things being erroneously built during
# the `release' and `install' phases.
#
INST_FORBID = gcc g++ cc c++ cxx cl gcc.sh cc.sh ld ld.sh
INST_FORBID += javac.sh javac guavac gcj jikes bock
INST_FORBID += $(notdir $(CC)) $(notdir $(LD)) $(notdir $(CXX))
INST_FORBID += $(notdir $(DED_CC)) $(notdir $(DED_LD))
INST_FORBID += $(ERL_BASE_PUB_FILES)
IBIN_FILES = $(addprefix $(IBIN_DIR)/,$(sort $(INST_FORBID))) # sort will
# remove
# duplicates
ifeq ($(OTP_STRICT_INSTALL),yes)
INST_PATH_PREFIX=$(IBIN_DIR):
INST_DEP = strict_install
ifneq ($(CROSS_COMPILING),yes)
INST_DEP += strict_install_all_bootstraps
endif
else # --- Normal case, i.e., not strict install ---
#
# By default we allow build during install and release phase; therefore,
# make sure that the bootstrap system is available in the path.
#
INST_PATH_PREFIX=$(BOOT_PREFIX)
# If cross compiling `erlc', in path might have be used; therefore,
# avoid triggering a bootstrap build...
INST_DEP =
ifneq ($(CROSS_COMPILING),yes)
INST_DEP += all_bootstraps
endif
endif # --- Normal case, i.e., not strict install ---
# ----------------------------------------------------------------------
# Fix up RELEASE_ROOT/TESTROOT havoc
ifeq ($(RELEASE_ROOT),)
ifneq ($(TESTROOT),)
RELEASE_ROOT = $(TESTROOT)
endif
endif
# ----------------------------------------------------------------------
# A default for the release_tests, not same target dir as release.
# More TESTROOT havoc...
ifeq ($(TESTSUITE_ROOT),)
ifneq ($(TESTROOT),)
TESTSUITE_ROOT = $(TESTROOT)
else
TESTSUITE_ROOT = $(ERL_TOP)/release/tests
endif
endif
#
# The steps to build a working system are:
# * build an emulator
# * setup the erl and erlc program in bootstrap/bin
# * build additional compilers and copy them into bootstrap/lib
# * use the bootstrap erl and erlc to build all the libs
#
.PHONY: all bootstrap all_bootstraps
ifneq ($(CROSS_COMPILING),yes)
# Not cross compiling
ifeq ($(BOOTSTRAP_ONLY),yes)
all: bootstrap
else
# The normal case; not cross compiling, and not bootstrap only build.
all: bootstrap libs local_setup
endif
else
# Cross compiling
all: cross_check_erl depend emulator libs start_scripts
endif
cross_check_erl:
@PATH=$(BOOT_PREFIX)$${PATH} $(ERL_TOP)/make/cross_check_erl \
-target $(TARGET) -otp $(OTP) -erl_top $(ERL_TOP) \
-force $(ERL_XCOMP_FORCE_DIFFERENT_OTP)
is_cross_configured:
@echo @CROSS_COMPILING@
target_configured:
@echo @TARGET@
bootstrap: depend all_bootstraps
ifeq ($(OTP_STRICT_INSTALL),yes)
.PHONY: strict_install_all_bootstraps
strict_install_all_bootstraps:
$(MAKE) BOOT_PREFIX=$(INST_PATH_PREFIX) OTP_STRICT_INSTALL=$(OTP_STRICT_INSTALL) all_bootstraps
endif
# With all bootstraps we mean all bootstrapping that is done when
# the system is delivered in open source, the primary
# bootstrap is not included, it requires a pre built emulator...
all_bootstraps: emulator \
bootstrap_setup \
secondary_bootstrap_build secondary_bootstrap_copy \
tertiary_bootstrap_build tertiary_bootstrap_copy
#
# Use these targets when you want to use the erl and erlc
# binaries in your PATH instead of those created from the
# pre-compiled Erlang modules under bootstrap/.
#
noboot:
$(MAKE) BOOT_PREFIX= emulator libs local_setup
noboot_install:
$(MAKE) BOOT_PREFIX= install
.PHONY: release release_docs
release: $(INST_DEP)
ifeq ($(OTP_SMALL_BUILD),true)
cd $(ERL_TOP)/lib && \
ERL_TOP=$(ERL_TOP) PATH=$(INST_PATH_PREFIX)$${PATH} \
$(MAKE) TESTROOT=$(RELEASE_ROOT) release
else
cd $(ERL_TOP)/lib && \
ERL_TOP=$(ERL_TOP) PATH=$(INST_PATH_PREFIX)$${PATH} \
$(MAKE) BUILD_ALL=1 TESTROOT=$(RELEASE_ROOT) release
endif
cd $(ERL_TOP)/erts && \
ERL_TOP=$(ERL_TOP) PATH=$(INST_PATH_PREFIX)$${PATH} \
$(MAKE) BUILD_ALL=1 TESTROOT=$(RELEASE_ROOT) release
# ---------------------------------------------------------------
# Target only used when building commercial ERTS patches
# ---------------------------------------------------------------
release_docs docs: mod2app
ifeq ($(OTP_SMALL_BUILD),true)
cd $(ERL_TOP)/lib && \
PATH=$(ERL_TOP)/bin:$${PATH} ERL_TOP=$(ERL_TOP) \
$(MAKE) TESTROOT=$(RELEASE_ROOT) $@
else
cd $(ERL_TOP)/lib && \
PATH=$(ERL_TOP)/bin:$${PATH} ERL_TOP=$(ERL_TOP) \
$(MAKE) BUILD_ALL=1 TESTROOT=$(RELEASE_ROOT) $@
endif
cd $(ERL_TOP)/erts && \
PATH=$(ERL_TOP)/bin:$${PATH} ERL_TOP=$(ERL_TOP) \
$(MAKE) BUILD_ALL=1 TESTROOT=$(RELEASE_ROOT) $@
cd $(ERL_TOP)/system/doc && \
PATH=$(ERL_TOP)/bin:$${PATH} \
ERL_TOP=$(ERL_TOP) $(MAKE) TESTROOT=$(RELEASE_ROOT) $@
mod2app:
PATH=$(ERL_TOP)/bin:$${PATH} escript $(ERL_TOP)/lib/erl_docgen/priv/bin/xref_mod_app.escript -topdir $(ERL_TOP) -outfile $(ERL_TOP)/make/$(TARGET)/mod2app.xml
# ----------------------------------------------------------------------
ERLANG_EARS=$(BOOTSTRAP_ROOT)/bootstrap/erts
ELINK=$(BOOTSTRAP_ROOT)/bootstrap/erts/bin/elink
BOOT_BINDIR=$(BOOTSTRAP_ROOT)/bootstrap/erts/bin
BEAM_EVM=$(ERL_TOP)/bin/$(TARGET)/beam_evm
BOOTSTRAP_COMPILER = $(BOOTSTRAP_TOP)/primary_compiler
.PHONY: emulator libs kernel stdlib compiler hipe typer syntax_tools preloaded
emulator:
cd erts && ERL_TOP=$(ERL_TOP) $(MAKE) NO_START_SCRIPTS=true $(TYPE) FLAVOR=$(FLAVOR)
libs:
ifeq ($(OTP_SMALL_BUILD),true)
cd lib && \
ERL_TOP=$(ERL_TOP) PATH=$(BOOT_PREFIX)$${PATH} \
$(MAKE) opt
else
cd lib && \
ERL_TOP=$(ERL_TOP) PATH=$(BOOT_PREFIX)$${PATH} \
$(MAKE) opt BUILD_ALL=true
endif
kernel:
cd lib/kernel && \
ERL_TOP=$(ERL_TOP) PATH=$(BOOT_PREFIX)$${PATH} \
$(MAKE) opt BUILD_ALL=true
stdlib:
cd lib/stdlib && \
ERL_TOP=$(ERL_TOP) PATH=$(BOOT_PREFIX)$${PATH} \
$(MAKE) opt BUILD_ALL=true
compiler:
cd lib/compiler && \
ERL_TOP=$(ERL_TOP) PATH=$(BOOT_PREFIX)$${PATH} \
$(MAKE) opt BUILD_ALL=true
hipe:
cd lib/hipe && \
ERL_TOP=$(ERL_TOP) PATH=$(BOOT_PREFIX)$${PATH} \
$(MAKE) opt BUILD_ALL=true
typer:
cd lib/typer && \
ERL_TOP=$(ERL_TOP) PATH=$(BOOT_PREFIX)$${PATH} \
$(MAKE) opt BUILD_ALL=true
syntax_tools:
cd lib/syntax_tools && \
ERL_TOP=$(ERL_TOP) PATH=$(BOOT_PREFIX)$${PATH} \
$(MAKE) opt BUILD_ALL=true
preloaded:
cd erts/preloaded/src && \
ERL_TOP=$(ERL_TOP) PATH=$(BOOT_PREFIX)$${PATH} \
$(MAKE) opt BUILD_ALL=true
dep depend:
test X"$$ERTS_SKIP_DEPEND" = X"true" || (cd erts/emulator && ERL_TOP=$(ERL_TOP) $(MAKE) generate)
test X"$$ERTS_SKIP_DEPEND" = X"true" || (cd erts/emulator && ERL_TOP=$(ERL_TOP) $(MAKE) depend)
test X"$$ERTS_SKIP_DEPEND" = X"true" || (cd erts/lib_src && ERL_TOP=$(ERL_TOP) $(MAKE) depend)
# Creates "erl" and "erlc" in bootstrap/bin which uses the precompiled
# libraries in the bootstrap directory
.PHONY: bootstrap_setup_target
# ----------------------------------------------------------------------
# Bootstraps...
# ----------------------------------------------------------------------
ifeq ($(TARGET),win32)
bootstrap_setup: check_recreate_primary_bootstrap bootstrap_setup_target
@rm -f $(BOOTSTRAP_ROOT)/bootstrap/bin/erl.exe \
$(BOOTSTRAP_ROOT)/bootstrap/bin/erlc.exe \
$(BOOTSTRAP_ROOT)/bootstrap/bin/escript.exe \
$(BOOTSTRAP_ROOT)/bootstrap/bin/erl.ini \
$(BOOTSTRAP_ROOT)/bootstrap/bin/beam.dll
make_bootstrap_ini.sh $(BOOTSTRAP_ROOT)/bootstrap \
$(ERL_TOP)/bin/$(TARGET)
@cp $(ERL_TOP)/bin/$(TARGET)/erlc.exe \
$(BOOTSTRAP_ROOT)/bootstrap/bin/erlc.exe
@cp $(ERL_TOP)/bin/$(TARGET)/erl.exe \
$(BOOTSTRAP_ROOT)/bootstrap/bin/erl.exe
@cp $(ERL_TOP)/bin/$(TARGET)/escript.exe \
$(BOOTSTRAP_ROOT)/bootstrap/bin/escript.exe
else
bootstrap_setup: check_recreate_primary_bootstrap bootstrap_setup_target $(BOOTSTRAP_ROOT)/bootstrap/bin/erl $(BOOTSTRAP_ROOT)/bootstrap/bin/erlc $(BOOTSTRAP_ROOT)/bootstrap/bin/escript
$(BOOTSTRAP_ROOT)/bootstrap/bin/erl: $(ERL_TOP)/erts/etc/unix/erl.src.src $(BOOTSTRAP_ROOT)/bootstrap/target
@rm -f $(BOOTSTRAP_ROOT)/bootstrap/bin/erl
@sed -e "s;%FINAL_ROOTDIR%;$(BOOTSTRAP_ROOT)/bootstrap;" \
-e "s;\$$ROOTDIR/erts-.*/bin;$(ERL_TOP)/bin/$(TARGET);" \
-e "s;EMU=.*;EMU=beam$(TYPEMARKER);" \
$(ERL_TOP)/erts/etc/unix/erl.src.src > \
$(BOOTSTRAP_ROOT)/bootstrap/bin/erl
@chmod 755 $(BOOTSTRAP_ROOT)/bootstrap/bin/erl
$(BOOTSTRAP_ROOT)/bootstrap/bin/erlc: $(ERL_TOP)/bin/$(TARGET)/erlc $(BOOTSTRAP_ROOT)/bootstrap/target
@rm -f $(BOOTSTRAP_ROOT)/bootstrap/bin/erlc
@cp $(ERL_TOP)/bin/$(TARGET)/erlc $(BOOTSTRAP_ROOT)/bootstrap/bin/erlc
@chmod 755 $(BOOTSTRAP_ROOT)/bootstrap/bin/erlc
$(BOOTSTRAP_ROOT)/bootstrap/bin/escript: $(ERL_TOP)/bin/$(TARGET)/escript $(BOOTSTRAP_ROOT)/bootstrap/target
@rm -f $(BOOTSTRAP_ROOT)/bootstrap/bin/escript
@cp $(ERL_TOP)/bin/$(TARGET)/escript $(BOOTSTRAP_ROOT)/bootstrap/bin/escript
@chmod 755 $(BOOTSTRAP_ROOT)/bootstrap/bin/escript
endif
bootstrap_setup_target:
@{ test -r $(BOOTSTRAP_ROOT)/bootstrap/target && \
test $(TARGET) = `cat $(BOOTSTRAP_ROOT)/bootstrap/target`; } || \
echo $(TARGET) > $(BOOTSTRAP_ROOT)/bootstrap/target
secondary_bootstrap_build:
cd lib && \
ERL_TOP=$(ERL_TOP) PATH=$(BOOT_PREFIX)$${PATH} \
$(MAKE) opt SECONDARY_BOOTSTRAP=true
secondary_bootstrap_copy:
if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/hipe ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/hipe ; fi
if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/hipe/ebin ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/hipe/ebin ; fi
for x in lib/hipe/ebin/*.beam; do \
BN=`basename $$x`; \
TF=$(BOOTSTRAP_ROOT)/bootstrap/lib/hipe/ebin/$$BN; \
test -f $$TF && \
test '!' -z "`find $$x -newer $$TF -print`" && \
cp $$x $$TF; \
test '!' -f $$TF && \
cp $$x $$TF; \
true; \
done
# if test -f lib/hipe/ebin/hipe.beam ; then cp lib/hipe/ebin/*.beam $(BOOTSTRAP_ROOT)/bootstrap/lib/hipe/ebin; fi
if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/parsetools ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/parsetools ; fi
if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/parsetools/ebin ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/parsetools/ebin ; fi
if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/parsetools/include ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/parsetools/include ; fi
if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/orber ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/orber ; fi
if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/orber/include ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/orber/include ; fi
for x in lib/parsetools/ebin/*.beam; do \
BN=`basename $$x`; \
TF=$(BOOTSTRAP_ROOT)/bootstrap/lib/parsetools/ebin/$$BN; \
test -f $$TF && \
test '!' -z "`find $$x -newer $$TF -print`" && \
cp $$x $$TF; \
test '!' -f $$TF && \
cp $$x $$TF; \
true; \
done
# cp lib/parsetools/ebin/*.beam $(BOOTSTRAP_ROOT)/bootstrap/lib/parsetools/ebin
for x in lib/parsetools/include/*.hrl; do \
BN=`basename $$x`; \
TF=$(BOOTSTRAP_ROOT)/bootstrap/lib/parsetools/include/$$BN; \
test -f $$TF && \
test '!' -z "`find $$x -newer $$TF -print`" && \
cp $$x $$TF; \
test '!' -f $$TF && \
cp $$x $$TF; \
true; \
done
# cp -f lib/parsetools/include/*.hrl $(BOOTSTRAP_ROOT)/bootstrap/lib/parsetools/include
if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/asn1 ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/asn1 ; fi
if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/asn1/ebin ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/asn1/ebin ; fi
if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/asn1/src ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/asn1/src ; fi
for x in lib/asn1/ebin/*.beam; do \
BN=`basename $$x`; \
TF=$(BOOTSTRAP_ROOT)/bootstrap/lib/asn1/ebin/$$BN; \
test -f $$TF && \
test '!' -z "`find $$x -newer $$TF -print`" && \
cp $$x $$TF; \
test '!' -f $$TF && \
cp $$x $$TF; \
true; \
done
# cp lib/asn1/ebin/*.beam $(BOOTSTRAP_ROOT)/bootstrap/lib/asn1/ebin
for x in lib/asn1/src/*.[eh]rl; do \
BN=`basename $$x`; \
TF=$(BOOTSTRAP_ROOT)/bootstrap/lib/asn1/src/$$BN; \
test -f $$TF && \
test '!' -z "`find $$x -newer $$TF -print`" && \
cp $$x $$TF; \
test '!' -f $$TF && \
cp $$x $$TF; \
true; \
done
# cp -f lib/asn1/src/*.erl lib/asn1/src/*.hrl $(BOOTSTRAP_ROOT)/bootstrap/lib/asn1/src
for x in lib/orber/include/*.hrl; do \
BN=`basename $$x`; \
TF=$(BOOTSTRAP_ROOT)/bootstrap/lib/orber/include/$$BN; \
test -f $$TF && \
test '!' -z "`find $$x -newer $$TF -print`" && \
cp $$x $$TF; \
test '!' -f $$TF && \
cp $$x $$TF; \
true; \
done
tertiary_bootstrap_build:
cd lib && \
ERL_TOP=$(ERL_TOP) PATH=$(BOOT_PREFIX)$${PATH} \
$(MAKE) opt TERTIARY_BOOTSTRAP=true
tertiary_bootstrap_copy:
if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/snmp ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/snmp ; fi
if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/snmp/ebin ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/snmp/ebin ; fi
if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/snmp/include ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/snmp/include ; fi
for x in lib/snmp/ebin/*.beam; do \
BN=`basename $$x`; \
TF=$(BOOTSTRAP_ROOT)/bootstrap/lib/snmp/ebin/$$BN; \
test -f $$TF && \
test '!' -z "`find $$x -newer $$TF -print`" && \
cp $$x $$TF; \
test '!' -f $$TF && \
cp $$x $$TF; \
true; \
done
# cp lib/snmp/ebin/*.beam $(BOOTSTRAP_ROOT)/bootstrap/lib/snmp/ebin
if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/sasl ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/sasl ; fi
if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/sasl/ebin ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/sasl/ebin ; fi
if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/sasl/include ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/sasl/include ; fi
if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/ic ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/ic ; fi
if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/ic/ebin ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/ic/ebin ; fi
if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/ic/include ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/ic/include ; fi
if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/wx ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/wx ; fi
if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/wx/ebin ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/wx/ebin ; fi
if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/wx/include ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/wx/include ; fi
if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/test_server ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/test_server ; fi
if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/test_server/include ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/test_server/include ; fi
for x in lib/ic/ebin/*.beam; do \
BN=`basename $$x`; \
TF=$(BOOTSTRAP_ROOT)/bootstrap/lib/ic/ebin/$$BN; \
test -f $$TF && \
test '!' -z "`find $$x -newer $$TF -print`" && \
cp $$x $$TF; \
test '!' -f $$TF && \
cp $$x $$TF; \
true; \
done
# cp lib/ic/ebin/*.beam $(BOOTSTRAP_ROOT)/bootstrap/lib/ic/ebin
for x in lib/ic/include/*.idl; do \
BN=`basename $$x`; \
TF=$(BOOTSTRAP_ROOT)/bootstrap/lib/ic/include/$$BN; \
test -f $$TF && \
test '!' -z "`find $$x -newer $$TF -print`" && \
cp $$x $$TF; \
test '!' -f $$TF && \
cp $$x $$TF; \
true; \
done
for x in lib/ic/include/*.h; do \
BN=`basename $$x`; \
TF=$(BOOTSTRAP_ROOT)/bootstrap/lib/ic/include/$$BN; \
test -f $$TF && \
test '!' -z "`find $$x -newer $$TF -print`" && \
cp $$x $$TF; \
test '!' -f $$TF && \
cp $$x $$TF; \
true; \
done
# cp -f lib/ic/include/*.idl lib/ic/include/*.h $(BOOTSTRAP_ROOT)/bootstrap/lib/ic/include
for x in lib/sasl/ebin/*.beam; do \
BN=`basename $$x`; \
TF=$(BOOTSTRAP_ROOT)/bootstrap/lib/sasl/ebin/$$BN; \
test -f $$TF && \
test '!' -z "`find $$x -newer $$TF -print`" && \
cp $$x $$TF; \
test '!' -f $$TF && \
cp $$x $$TF; \
true; \
done
# cp lib/sasl/ebin/*.beam $(BOOTSTRAP_ROOT)/bootstrap/lib/sasl/ebin
if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/syntax_tools ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/syntax_tools ; fi
if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/syntax_tools/ebin ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/syntax_tools/ebin ; fi
for x in lib/syntax_tools/ebin/*.beam; do \
BN=`basename $$x`; \
TF=$(BOOTSTRAP_ROOT)/bootstrap/lib/syntax_tools/ebin/$$BN; \
test -f $$TF && \
test '!' -z "`find $$x -newer $$TF -print`" && \
cp $$x $$TF; \
test '!' -f $$TF && \
cp $$x $$TF; \
true; \
done
for x in lib/wx/include/*.hrl; do \
BN=`basename $$x`; \
TF=$(BOOTSTRAP_ROOT)/bootstrap/lib/wx/include/$$BN; \
test -f $$TF && \
test '!' -z "`find $$x -newer $$TF -print`" && \
cp $$x $$TF; \
test '!' -f $$TF && \
cp $$x $$TF; \
true; \
done
# copy wx_object to remove undef behaviour warnings
for x in lib/wx/ebin/wx_object.beam; do \
BN=`basename $$x`; \
TF=$(BOOTSTRAP_ROOT)/bootstrap/lib/wx/ebin/$$BN; \
test -f $$TF && \
test '!' -z "`find $$x -newer $$TF -print`" && \
cp $$x $$TF; \
test '!' -f $$TF && \
cp $$x $$TF; \
true; \
done
for x in lib/test_server/include/*.hrl; do \
BN=`basename $$x`; \
TF=$(BOOTSTRAP_ROOT)/bootstrap/lib/test_server/include/$$BN; \
test -f $$TF && \
test '!' -z "`find $$x -newer $$TF -print`" && \
cp $$x $$TF; \
test '!' -f $$TF && \
cp $$x $$TF; \
true; \
done
# cp lib/syntax_tools/ebin/*.beam $(BOOTSTRAP_ROOT)/bootstrap/lib/syntax_tools/ebin
.PHONY: check_recreate_primary_bootstrap recreate_primary_bootstrap
#
# If the source is a prebuilt delivery, no $(ERL_TOP)/bootstrap/lib
# directory will exist. All applications part of the primary bootstrap
# are delivered prebuilt though. If it is a prebuilt delivery we need
# to recreate the primary bootstrap, from the prebuilt result.
#
# A prebuild delivery always contain a $(ERL_TOP)/prebuilt.files file.
# If no such file exists, we wont try to recreate the primary bootstrap,
# since it will just fail producing anything useful.
#
check_recreate_primary_bootstrap:
@if test -f $(ERL_TOP)/prebuilt.files ; then \
if test ! -d $(ERL_TOP)/bootstrap/lib ; then \
$(ERL_TOP)/otp_build save_bootstrap ; \
fi ; \
fi
#
# recreate_primary_bootstrap assumes that if $(ERL_TOP)/prebuilt.files
# exist, all build results needed already exist in the application specific
# directories of all applications part of the primary bootstrap.
#
recreate_primary_bootstrap:
$(ERL_TOP)/otp_build save_bootstrap
# The first bootstrap build is rarely (never) used in open source, it's
# used to build the shipped bootstrap directory. The Open source bootstrap
# stages start with secondary bootstrap.
#
# These are the ones used, the other ones (prefixed with old_) are for BC.
# These modules should stay in the kernel directory to make building
# of the emulator possible
.PHONY: primary_bootstrap \
primary_bootstrap_build \
primary_bootstrap_compiler \
primary_bootstrap_mkdirs \
primary_bootstrap_copy
primary_bootstrap:
@echo "=== Building a bootstrap compiler in $(BOOTSTRAP_ROOT)/bootstrap"
$(MAKE) BOOTSTRAP_ROOT=$(BOOTSTRAP_ROOT) \
ERL_TOP=$(ERL_TOP) \
bootstrap_clean
cd $(ERL_TOP) && \
$(MAKE) TESTROOT=$(BOOTSTRAP_TOP) \
BOOTSTRAP_TOP=$(BOOTSTRAP_TOP) \
primary_bootstrap_build
cd $(ERL_TOP) && \
$(MAKE) TESTROOT=$(BOOTSTRAP_TOP) \
BOOTSTRAP_TOP=$(BOOTSTRAP_TOP) \
primary_bootstrap_copy
cd $(ERL_TOP)/erts/start_scripts && \
$(MAKE) TESTROOT=$(BOOTSTRAP_TOP) \
BOOTSTRAP_TOP=$(BOOTSTRAP_TOP) bootstrap_scripts
test $(BOOTSTRAP_ROOT) = $(ERL_TOP) \
|| $(ERL_TOP)/otp_build \
copy_primary_bootstrap \
$(BOOTSTRAP_TOP) \
$(BOOTSTRAP_ROOT)
primary_bootstrap_build: primary_bootstrap_mkdirs primary_bootstrap_compiler \
primary_bootstrap_stdlib
cd lib && $(MAKE) ERLC_FLAGS='-pa $(BOOTSTRAP_COMPILER)/ebin' \
BOOTSTRAP_TOP=$(BOOTSTRAP_TOP) \
BOOTSTRAP=1 opt
primary_bootstrap_compiler:
cd lib/compiler && $(MAKE) \
BOOTSTRAP_TOP=$(BOOTSTRAP_TOP) \
BOOTSTRAP_COMPILER=$(BOOTSTRAP_COMPILER) \
BOOTSTRAP=1 \
opt
primary_bootstrap_stdlib:
cd lib/stdlib/src && $(MAKE) \
BOOTSTRAP_COMPILER=$(BOOTSTRAP_COMPILER) \
primary_bootstrap_compiler
primary_bootstrap_mkdirs:
test -d $(BOOTSTRAP_COMPILER)/egen \
|| mkdir -p $(BOOTSTRAP_COMPILER)/egen
test -d $(BOOTSTRAP_COMPILER)/ebin \
|| mkdir -p $(BOOTSTRAP_COMPILER)/ebin
test -d $(BOOTSTRAP_TOP)/lib/kernel/egen \
|| mkdir -p $(BOOTSTRAP_TOP)/lib/kernel/egen
test -d $(BOOTSTRAP_TOP)/lib/kernel/ebin \
|| mkdir -p $(BOOTSTRAP_TOP)/lib/kernel/ebin
test -d $(BOOTSTRAP_TOP)/lib/kernel/include \
|| mkdir -p $(BOOTSTRAP_TOP)/lib/kernel/include
test -d $(BOOTSTRAP_TOP)/lib/stdlib/egen \
|| mkdir -p $(BOOTSTRAP_TOP)/lib/stdlib/egen
test -d $(BOOTSTRAP_TOP)/lib/stdlib/ebin \
|| mkdir -p $(BOOTSTRAP_TOP)/lib/stdlib/ebin
test -d $(BOOTSTRAP_TOP)/lib/stdlib/include \
|| mkdir -p $(BOOTSTRAP_TOP)/lib/stdlib/include
test -d $(BOOTSTRAP_TOP)/lib/compiler/egen \
|| mkdir -p $(BOOTSTRAP_TOP)/lib/compiler/egen
test -d $(BOOTSTRAP_TOP)/lib/compiler/ebin \
|| mkdir -p $(BOOTSTRAP_TOP)/lib/compiler/ebin
test -d $(BOOTSTRAP_TOP)/lib/orber/include \
|| mkdir -p $(BOOTSTRAP_TOP)/lib/orber/include
primary_bootstrap_copy:
cp -f lib/kernel/include/*.hrl $(BOOTSTRAP_TOP)/lib/kernel/include
cp -f lib/stdlib/include/*.hrl $(BOOTSTRAP_TOP)/lib/stdlib/include
cp -f lib/orber/include/* $(BOOTSTRAP_TOP)/lib/orber/include
# To remove modules left by the bootstrap building, but leave (restore)
# the modules in kernel which are needed for an emulator build
KERNEL_PRELOAD = otp_ring0 init erl_prim_loader prim_inet prim_file zlib prim_zip erlang
KERNEL_PRELOAD_BEAMS=$(KERNEL_PRELOAD:%=$(BOOTSTRAP_TOP)/lib/kernel/ebin/%.beam)
start_scripts:
@cd erts/start_scripts \
&& ERL_TOP=$(ERL_TOP) PATH=$(BOOT_PREFIX)$${PATH} $(MAKE) script
# Creates "erl" and "erlc" scripts in bin/erl which uses the libraries in lib
local_setup:
@rm -f bin/erl bin/erlc bin/cerl
@cd erts && \
ERL_TOP=$(ERL_TOP) PATH=$(BOOT_PREFIX)$${PATH} \
$(MAKE) local_setup
# ----------------------------------------------------------------------
# Build tests
# ---------------------------------------------------------------------
TEST_DIRS := \
lib/test_server \
$(wildcard lib/*/test) \
erts/test \
erts/epmd/test \
erts/emulator/test
.PHONY: tests release_tests $(TEST_DIRS)
tests release_tests: $(TEST_DIRS)
$(TEST_DIRS):
if test -f $@/Makefile; then \
(cd $@; $(MAKE) TESTROOT=$(TESTSUITE_ROOT) \
PATH=$(ERL_TOP)/bin:$(BOOT_PREFIX)$${PATH} release_tests) || exit $$?; \
fi
#
# Install
#
# Order is important here, don't change it!
#
INST_DEP += install.dirs install.emulator install.libs install.Install install.bin
install: $(INST_DEP)
install-docs:
ERL_TOP=$(ERL_TOP) INSTALLROOT=$(ERLANG_LIBDIR) PATH=$(BOOT_PREFIX)$${PATH} \
$(MAKE) RELEASE_ROOT=$(ERLANG_LIBDIR) release_docs
install.emulator:
cd erts && \
ERL_TOP=$(ERL_TOP) PATH=$(INST_PATH_PREFIX)$${PATH} \
$(MAKE) TESTROOT=$(ERLANG_LIBDIR) release
install.libs:
ifeq ($(OTP_SMALL_BUILD),true)
cd lib && \
ERL_TOP=$(ERL_TOP) PATH=$(INST_PATH_PREFIX)$${PATH} \
$(MAKE) TESTROOT=$(ERLANG_LIBDIR) release
else
cd lib && \
ERL_TOP=$(ERL_TOP) PATH=$(INST_PATH_PREFIX)$${PATH} \
$(MAKE) TESTROOT=$(ERLANG_LIBDIR) BUILD_ALL=true release
endif
install.Install:
(cd $(ERLANG_LIBDIR) \
&& ./Install $(INSTALL_CROSS) -minimal $(ERLANG_INST_LIBDIR))
#
# Install erlang base public files
#
install.bin:
@ DESTDIR="$(DESTDIR)" EXTRA_PREFIX="$(EXTRA_PREFIX)" \
LN_S="$(LN_S)" BINDIR_SYMLINKS="$(BINDIR_SYMLINKS)" \
$(ERL_TOP)/make/install_bin \
--bindir "$(bindir)" \
--erlang-bindir "$(erlang_bindir)" \
--exec-prefix "$(exec_prefix)" \
$(ERL_BASE_PUB_FILES)
#
# Directories needed before we can install
#
install.dirs:
test -d $(BINDIR) || ${MKSUBDIRS} $(BINDIR)
${MKSUBDIRS} $(ERLANG_LIBDIR)
${MKSUBDIRS} $(ERLANG_LIBDIR)/usr/lib
.PHONY: strict_install
strict_install: $(IBIN_DIR) $(IBIN_FILES)
$(IBIN_FILES): $(ERL_TOP)/make/unexpected_use
rm -f $@
(cd $(dir $@) && $(LN_S) $(ERL_TOP)/make/unexpected_use $(notdir $@))
$(IBIN_DIR):
$(MKSUBDIRS) $@
# ----------------------------------------------------------------------
.PHONY: clean eclean bootstrap_root_clean bootstrap_clean
#
# Clean targets
#
clean: check_recreate_primary_bootstrap
rm -f *~ *.bak config.log config.status prebuilt.files ibin/*
find . -type f -name SKIP -print | xargs $(RM)
cd erts && ERL_TOP=$(ERL_TOP) $(MAKE) clean
cd lib && ERL_TOP=$(ERL_TOP) $(MAKE) clean BUILD_ALL=true
#
# Just wipe out emulator, not libraries
#
eclean:
cd erts && ERL_TOP=$(ERL_TOP) $(MAKE) clean
#
# Clean up bootstrap
#
bootstrap_root_clean:
rm -f $(BOOTSTRAP_ROOT)/bootstrap/lib/*/ebin/*.beam
rm -f $(BOOTSTRAP_ROOT)/bootstrap/lib/*/include/*.hrl
rm -f $(BOOTSTRAP_ROOT)/bootstrap/bin/*.*
# $(ERL_TOP)/bootstrap *should* equal $(BOOTSTRAP_TOP)
#
# We use $(ERL_TOP)/bootstrap instead of $(BOOTSTRAP_TOP) here as an
# extra safety precaution (we would really make a mess if
# $(BOOTSTRAP_TOP) for some reason should be empty).
bootstrap_clean:
rm -f $(ERL_TOP)/bootstrap/lib/*/ebin/*.beam
rm -f $(ERL_TOP)/bootstrap/lib/*/ebin/*.app
rm -f $(ERL_TOP)/bootstrap/lib/*/egen/*
rm -f $(ERL_TOP)/bootstrap/lib/*/include/*.hrl
rm -f $(ERL_TOP)/bootstrap/primary_compiler/ebin/*
rm -f $(ERL_TOP)/bootstrap/primary_compiler/egen/*
rm -f $(ERL_TOP)/bootstrap/bin/*.*
rm -f $(KERNEL_PRELOAD:%=$(ERL_TOP)/lib/kernel/ebin/%.beam)
test $(BOOTSTRAP_ROOT) = $(ERL_TOP) \
|| $(MAKE) BOOTSTRAP_ROOT=$(BOOTSTRAP_ROOT) bootstrap_root_clean
# ----------------------------------------------------------------------
Jump to Line
Something went wrong with that request. Please try again.