From c29ffbe7c87abb7b6b998849165039106caea350 Mon Sep 17 00:00:00 2001 From: Christian Javellana Date: Sun, 20 Sep 2015 07:43:58 -0400 Subject: [PATCH 1/2] Added problem description --- problems/skiing-in-singapore/README.md | 35 ++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) create mode 100644 problems/skiing-in-singapore/README.md diff --git a/problems/skiing-in-singapore/README.md b/problems/skiing-in-singapore/README.md new file mode 100644 index 0000000..757cde1 --- /dev/null +++ b/problems/skiing-in-singapore/README.md @@ -0,0 +1,35 @@ +# Skiing in Singapore +I came across this programming excercise from redmart that caught my interest. At the same time im in the midst of the harvard's cs50 course which i took through edx as a refresher. So I thought of taking up the programming excercise challenge and try to implement it using c. So without further ado, the challenge description goes like this: + +==================== + +Sometimes it's nice to take a break and code up a solution to a small, fun problem. Here is one some of our engineers enjoyed recently called Skiing In Singapore. + +Well you can’t really ski in Singapore. But let’s say you hopped on a flight to the Niseko ski resort in Japan. Being a software engineer you can’t help but value efficiency, so naturally you want to ski as long as possible and as fast as possible without having to ride back up on the ski lift. So you take a look at the map of the mountain and try to find the longest ski run down. + +In digital form the map looks like the number grid below. + +4 4 +4 8 7 3 +2 5 9 3 +6 3 2 5 +4 4 1 6 + +The first line (4 4) indicates that this is a 4x4 map. Each number represents the elevation of that area of the mountain. From each area (i.e. box) in the grid you can go north, south, east, west - but only if the elevation of the area you are going into is less than the one you are in. I.e. you can only ski downhill. You can start anywhere on the map and you are looking for a starting point with the longest possible path down as measured by the number of boxes you visit. And if there +are several paths down of the same length, you want to take the one with the steepest vertical drop, i.e. the largest difference between your starting elevation and your ending elevation. + +On this particular map the longest path down is of length=5 and it’s highlighted in bold below: 9-5-3-2-1. + +4 4 +4 8 7 3 +2 5 9 3 +6 3 2 5 +4 4 1 6 + +There is another path that is also length five: 8-5-3-2-1. However the tie is broken by the first path being steeper, dropping from 9 to 1, a drop of 8, rather than just 8 to 1, a drop of 7. + +Your challenge is to write a program in your favorite programming language to find the longest (and then steepest) path on this map specified in the format above. It’s 1000x1000 in size, and all the numbers on it are between 0 and 1500. + +Send your code or a github link (and a resume if you like) to [?????? at redmart dot com], replacing “??????” with the concatenation of the length of the longest path with the largest drop, and the size of the drop. So in the simple example above length=5, drop=8, so the email address would be [58 at redmart dot com]. If your e-mail gets through - you got the right answer. + +Good luck and have fun! From 988466e6d6933c67462f2d438e88ac2b7db7e12c Mon Sep 17 00:00:00 2001 From: Christian Javellana Date: Sun, 20 Sep 2015 11:30:18 -0400 Subject: [PATCH 2/2] Added solution to skiing in singapore problem --- solutions/c/sgski.c | 262 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 262 insertions(+) create mode 100644 solutions/c/sgski.c diff --git a/solutions/c/sgski.c b/solutions/c/sgski.c new file mode 100644 index 0000000..2bb6f82 --- /dev/null +++ b/solutions/c/sgski.c @@ -0,0 +1,262 @@ +// required; otherwise clang will complain that getline has not been declared +#define _XOPEN_SOURCE 700 +#include +#include +#include +#include + +typedef struct { + int **matrix; + int rowCount; + int colCount; +} matrix; + +typedef struct { + char* solution; + int distance; + int drop; +} solution; + +typedef struct { + int row; + int col; +} cellIndex; + +// input file reading routines +void readfile(matrix *m, FILE* fp); +void initMatrix(matrix *m, char* line); +void readline(matrix *m, char* line, int rowIndex); + +// solution finder +void findSkiPath(matrix *m, solution *sol); +void checkAdjacentCells(const char* path, matrix *m, cellIndex index, solution *sol, int currentValue); +void evaluateSolution(solution *sol, const char* path); + +// miscellaneous routines +void showContents(matrix *m); + +int main(int argc, char* argv[]) { + + if(argc != 2) { + printf("usage: sgski \n"); + exit(1); + } + + char* filename = argv[1]; + FILE *ifp = fopen(filename, "r"); + if (ifp == NULL) { + printf("Unable to open input file %s\n", filename); + exit(EXIT_FAILURE); + } + + // initialize the solution structure + solution *sol = malloc(sizeof(solution)); + sol->solution = malloc(sizeof(char) * 100); + sol->distance = 0; + sol->drop = 0; + + matrix *m = malloc(sizeof(matrix)); + + // read the input file into the matrix + readfile(m, ifp); + + // close file after reading + fclose(ifp); + + findSkiPath(m, sol); + + printf("Ski Path: %s; Distance: %d; Drop: %d\n", sol->solution, sol->distance, sol->drop); + + // release resources + free(sol); + free(m); + + return 0; +} + +void findSkiPath(matrix *m, solution *sol) { + for (int i = 0; i < m->rowCount; i++) { + for (int j = 0; j < m->colCount; j++) { + int value = m->matrix[i][j]; + char* path = malloc(sizeof(char) * 6); + sprintf(path, "%d ", value); + + cellIndex index; + + // check east + index.row = i; + index.col = j + 1; + checkAdjacentCells(path, m, index, sol, value); + + // check west + index.row = i; + index.col = j - 1; + checkAdjacentCells(path, m, index, sol, value); + + // check north + index.row = i - 1; + index.col = j; + checkAdjacentCells(path, m, index, sol, value); + + // check south + index.row = i + 1; + index.col = j; + checkAdjacentCells(path, m, index, sol, value); + } + } +} + +void checkAdjacentCells(const char* path, matrix *m, cellIndex index, solution *sol, int currentValue) { + + // The base case - If we go beyond the limits of the matrix + if(index.row < 0 || index.row > (m->rowCount - 1) + || index.col < 0 || index.col > (m->colCount - 1)) { + evaluateSolution(sol, path); + return; + } + + // check if the next cell has a lower value than the current cell + int val = m->matrix[index.row][index.col]; + if(val < currentValue) { + char* newPath = malloc(sizeof(char) * (strlen(path) + 4 + 1 + 1)); // the 4-digit value + space + \0 + strcpy(newPath, path); + + char *ch = malloc(sizeof(char) * (5 + 1)); // support upto 4-digit value and \0 (string terminator) + if(ch == NULL) { + printf("Unable to allocate memory\n"); + exit(EXIT_FAILURE); + } + sprintf(ch, "%d ", val); + strcat(newPath, ch); + free(ch); + + int r = index.row, c = index.col; + + // check east + index.row = r; + index.col = c + 1; + checkAdjacentCells((const char*) newPath, m, index, sol, val); + + // check west + index.row = r; + index.col = c - 1; + checkAdjacentCells((const char*) newPath, m, index, sol, val); + + // check north + index.row = r - 1; + index.col = c; + checkAdjacentCells((const char*) newPath, m, index, sol, val); + + // check south + index.row = r + 1; + index.col = c; + checkAdjacentCells((const char*) newPath, m, index, sol, val); + + free(newPath); + } + + // all ajacent cells have bigger value then the current cell + evaluateSolution(sol, path); + return; +} + +/** + * Checks if the longest path with the steepest drop has been found. + */ +void evaluateSolution(solution *sol, const char* path) { + // split the string by the space delimiter + int distance = 1; + char *dropTemp[2]; + dropTemp[0] = strtok(strdup(path), " "); + char* end = dropTemp[1] = strdup(dropTemp[0]); + + while ((end = strtok(NULL, " ")) != NULL) { + dropTemp[1] = end; + distance++; + } + + if(distance < sol->distance) { + return; + } + + int drop = atoi(dropTemp[0]) - atoi(dropTemp[1]); + if(distance > sol->distance || drop > sol->drop) { + strcpy(sol->solution, path); + sol->distance = distance; + sol->drop = drop; + } +} + +void readfile(matrix *m, FILE* fp) { + int rowIndex = 0; + size_t len = 0; + size_t read = -1; + char *line; + + while ((read = getline(&line, &len, fp) != -1)) { + if (rowIndex == 0) { + // the first row of the input file + // contains the size of the matrix. + initMatrix(m, line); + } else { + readline(m, line, rowIndex); + } + + rowIndex++; + } +} + +/** + * Reads the size of the matrix from the first line of the input file and + * sets the row and column counts into the parameters rowCount and colCount + * attributes of matrix m. + * + * This function is to be called on the first line of the input file. + */ +void initMatrix(matrix *m, char* line) { + + // reads the row count - the first value on the line string + char *ch = strtok(line, " "); + m->rowCount = atoi(ch); + + // reads the column count - the second value on the line string + ch = strtok(NULL, " "); + m->colCount = atoi(ch); + + // initialize a two-dimentional array of size rowCount * columnCount + int** matrix = (int **) malloc(sizeof(int *) * m->rowCount); + for(int i = 0; i < m->rowCount; i++) { + matrix[i] = (int *) malloc(sizeof(int) * m->colCount); + } + + m->matrix = matrix; +} + +void readline(matrix *m, char* line, int rowIndex) { + int colIndex = 0; + char *ch = strtok(line, " "); + + while(ch != NULL) { + int val = atoi(ch); + if(val > 9999) { + printf("Invalid input file. Cannot have value greater than 9999\n"); + exit(EXIT_FAILURE); + } + + m->matrix[rowIndex - 1][colIndex] = atoi(ch); + ch = strtok(NULL, " "); + colIndex++; + } +} + +/** + * Prints the contents of the matrix into the console + */ +void showContents(matrix *m) { + for(int i = 0; i < m->rowCount; i++) { + for (int j = 0; j < m->colCount; j++) { + printf("%d ", m->matrix[i][j]); + } + printf("\n"); + } +}