Skip to content
Permalink
Branch: master
Find file Copy path
Find file Copy path
Fetching contributors…
Cannot retrieve contributors at this time
165 lines (144 sloc) 4.81 KB
/* Copyright (c) 2014 Sam Sykes, Gordon Williams. See the file LICENSE for copying permission. */
/*
Module for the SSD1306 OLED controller in displays like the Crius CO-16
```
function go(){
// write some text
g.drawString("Hello World!",2,2);
// write to the screen
g.flip();
}
// I2C
I2C1.setup({scl:B6,sda:B7});
var g = require("SSD1306").connect(I2C1, go);
// or
var g = require("SSD1306").connect(I2C1, go, { address: 0x3C });
// SPI
var s = new SPI();
s.setup({mosi: B6, sck:B5});
var g = require("SSD1306").connectSPI(s, A8, B7, go);
```
*/
var C = {
OLED_WIDTH : 128,
OLED_CHAR : 0x40,
OLED_CHUNK : 128
};
// commands sent when initialising the display
var extVcc=false; // if true, don't start charge pump
var initCmds = new Uint8Array([
0xAE, // 0 disp off
0xD5, // 1 clk div
0x80, // 2 suggested ratio
0xA8, 63, // 3 set multiplex, height-1
0xD3,0x0, // 5 display offset
0x40, // 7 start line
0x8D, extVcc?0x10:0x14, // 8 charge pump (need 0x14)
0x20, 0x00, // 10 memory mode
0xA1, // 12 seg remap 1 (screen orientation)
0xC8, // 13 comscandec () screen orientation change to INC to flip)
0xDA, 0x12, // 14 set compins, height==64 ? 0x12:0x02,
0x81, extVcc?0x9F:0xCF, // 16 set contrast //0x8F
0xD9, extVcc?0x22:0xF1, // 18 set precharge
0xDB, 0x40, // 20 set vcom detect
0xA4, // 22 display all on
0xA6, // 23 display normal (non-inverted)
0xAF // 24 disp on
]);
// commands sent when sending data to the display
var flipCmds = [
0x21, // columns
0, C.OLED_WIDTH-1,
0x22, // pages
0, 7 /* (height>>3)-1 */];
function update(options) {
if (options) {
if (options.height) {
initCmds[4] = options.height-1;
initCmds[15] = options.height==64 || options.height== 48 ? 0x12 : 0x02;
flipCmds[5] = (options.height>>3)-1;
}
if (options.contrast!==undefined) initCmds[17] = options.contrast;
}
}
exports.connect = function(i2c, callback, options) {
update(options);
var oled = Graphics.createArrayBuffer(C.OLED_WIDTH,initCmds[4]+1,1,{vertical_byte : true});
var addr = 0x3C;
if(options) {
if (options.address) addr = options.address;
// reset display if 'rst' is part of options
if (options.rst) digitalPulse(options.rst, 0, 10);
}
setTimeout(function() {
// configure the OLED
initCmds.forEach(function(d) {i2c.writeTo(addr, [0,d]);});
}, 50);
// if there is a callback, call it now(ish)
if (callback !== undefined) setTimeout(callback, 100);
// write to the screen
oled.flip = function() {
// set how the data is to be sent (whole screen)
flipCmds.forEach(function(d) {i2c.writeTo(addr, [0,d]);});
var chunk = new Uint8Array(C.OLED_CHUNK+1);
chunk[0] = C.OLED_CHAR;
for (var p=0; p<this.buffer.length; p+=C.OLED_CHUNK) {
chunk.set(new Uint8Array(this.buffer,p,C.OLED_CHUNK), 1);
i2c.writeTo(addr, chunk);
}
};
// set contrast, 0..255
oled.setContrast = function(c) { i2c.writeTo(addr, 0, 0x81, c); };
// set off
oled.off = function() { i2c.writeTo(addr, 0, 0xAE); }
// set on
oled.on = function() { i2c.writeTo(addr, 0, 0xAF); }
// return graphics
return oled;
};
exports.connectSPI = function(spi, dc, rst, callback, options) {
update(options);
var cs = options?options.cs:undefined;
var oled = Graphics.createArrayBuffer(C.OLED_WIDTH,initCmds[4]+1,1,{vertical_byte : true});
if (rst) digitalPulse(rst,0,10);
setTimeout(function() {
if (cs) digitalWrite(cs,0);
// configure the OLED
digitalWrite(dc,0); // command
spi.write(initCmds);
digitalWrite(dc,1); // data
if (cs) digitalWrite(cs,10);
// if there is a callback, call it now(ish)
if (callback !== undefined) setTimeout(callback, 10);
}, 50);
// write to the screen
oled.flip = function() {
// set how the data is to be sent (whole screen)
if (cs) digitalWrite(cs,0);
digitalWrite(dc,0);// command
spi.write(flipCmds);
digitalWrite(dc,1);// data
spi.write(this.buffer);
if (cs) digitalWrite(cs,1);
};
// set contrast, 0..255
oled.setContrast = function(c) {
if (cs) cs.reset();
spi.write(0x81,c,dc);
if (cs) cs.set();
};
// set off
oled.off = function() {
if (cs) cs.reset();
spi.write(0xAE,dc);
if (cs) cs.set();
};
// set on
oled.on = function() {
if (cs) cs.reset();
spi.write(0xAF,dc);
if (cs) cs.set();
};
// return graphics
return oled;
};
You can’t perform that action at this time.