BondingShouldBeFree bonding solution based on Multipath TCP (MPTCP) is a set of programmes that utilises MPTCP, providing advanced network aggregation and redundancy capabilities.
This project leverages an upstream kernel and is currently focused on supporting conventional Linux distributions and all OpenWrt-supported devices.
The main goal of BSBF bonding is to combine multiple internet connections into a single connection to improve both bandwidth throughput and network reliability. By aggregating multiple internet breakouts, users can achieve better performance and maintain connectivity as long as there is one working connection.
Head here.
Head here.
- Discord: For usage, projects, discussions and hardware advice.
Replace the server IPv4 address, server port, and UUID with yours below. Then run the command below. This command can be re-run to change the server and/or upgrade the solution.
curl -fsSL https://github.com/bondingshouldbefree/bsbf-resources/raw/main/resources-client/bsbf-client-installer.sh \
| sudo sh -s -- --server-ipv4 25.0.0.1 --server-port 16384 --uuid 60d210ef-7271-4dc9-9b93-01563608bf90
To uninstall, run the command below.
sudo bsbf-bonding --uninstall
Replace the server IPv4 address, server port, and UUID with yours below. Then run the command below. This command can be re-run to change the server and/or upgrade the solution.
apk add curl && curl -fsSL https://github.com/bondingshouldbefree/bsbf-resources/raw/main/resources-client/bsbf-client-openwrt-installer.sh \
| sh -s -- --server-ipv4 25.0.0.1 --server-port 16384 --uuid 60d210ef-7271-4dc9-9b93-01563608bf90
If the device runs out of storage at install, you can try to build an image instead by following the steps below.
Head to the BondingShouldBeFree firmware selector. Put in your OpenWrt-supported device model. Put in your server IPv4 address, server port, and UUID. Then download the generated image for your device.
The network interface with the biggest number at the end, such as lan5, will be made LAN. If there are no interfaces with a number at the end, the first found LAN network interface will be used instead. Other interfaces will be made WAN.
To uninstall, run the command below. This will not revert the changes made to the network configuration.
bsbf-bonding --uninstall
Run the command below. This command can be re-run to upgrade the solution.
curl -fsSL https://github.com/bondingshouldbefree/bsbf-resources/raw/main/resources-server/bsbf-server-installer.sh | sudo sh
Add a client with 50 Mbps download and upload limit. To add one without download or upload limit, specify 0 instead. The command will return the UUID and server port:
sudo bsbf-add-client 50
16384 60d210ef-7271-4dc9-9b93-01563608bf90
Remove a client with a given port, port range, or UUID:
sudo bsbf-remove-client 16384
sudo bsbf-remove-client 16384-16400
sudo bsbf-remove-client 60d210ef-7271-4dc9-9b93-01563608bf90
To uninstall, run the command below.
curl -fsSL https://github.com/bondingshouldbefree/bsbf-resources/raw/main/resources-server/bsbf-server-installer.sh \
| sudo sh -s -- --uninstall
