Permalink
Commits on May 8, 2012
  1. bcm2708: update for 3.2 kernel

    bootc committed May 8, 2012
    Signed-off-by: Chris Boot <bootc@bootc.net>
  2. sound/arm/bcm2835.c: add linux/module.h include

    bootc committed May 8, 2012
    Signed-off-by: Chris Boot <bootc@bootc.net>
  3. smsc95xx: mark link down on startup and let PHY interrupt deal with c…

    Paolo Pisati authored and bootc committed Apr 23, 2012
    …arrier changes
    
    Without this patch sysfs reports the cable as present
    
    flag@flag-desktop:~$ cat /sys/class/net/eth0/carrier
    1
    
    while it's not:
    
    flag@flag-desktop:~$ sudo mii-tool eth0
    eth0: no link
    
    Tested on my Beagle XM.
    
    v2: added mantainer to the list of recipient
    
    Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
    Acked-by: Steve Glendinning <steve.glendinning@shawell.net>
    Signed-off-by: David S. Miller <davem@davemloft.net>
  4. net: usb: smsc95xx: fix mtu

    fillods authored and bootc committed Apr 20, 2012
    Make smsc95xx recalculate the hard_mtu after adjusting the
    hard_header_len.
    
    Without this, usbnet adjusts the MTU down to 1488 bytes, and the host is
    unable to receive standard 1500-byte frames from the device.
    
    Inspired by same fix on cdc_eem 78fb72f.
    
    Tested on ARM/Beagle.
    
    Signed-off-by: Stephane Fillod <fillods@users.sf.net>
    Signed-off-by: David S. Miller <davem@davemloft.net>
  5. mach-bcm2708: fix mach/debug-macro.S so that early printk works

    bootc committed May 7, 2012
    Not sure what the original code was trying to do as it was completely
    wrong on many levels. This patch fixes the macro to return the correct
    physical and virtual addresses of the PL011 UART on the RPi.
    
    Note that you need to boot the compressed kernel (zImage) so that the
    UART is configured at boot, or your kernel will hang when it tries to
    access the UART.
    
    Signed-off-by: Chris Boot <bootc@bootc.net>
  6. mach-bcm2708: Fix UART code in mach/uncompress.h

    bootc committed May 7, 2012
    The UART code was completely broken and caused the RPi to hang at boot
    when trying to decompress the kernel. This patch also adds code to set
    up the UART at 115200 baud, which is the default speed for the console
    later on in the boot process, as it is not set up by the bootloader.
    
    Signed-off-by: Chris Boot <bootc@bootc.net>
  7. mach-bcm2708: Move AMBA clock constant to mach/platform.h

    bootc committed May 7, 2012
    We'll be using this in future patches for setting up the UART early.
    
    Signed-off-by: Chris Boot <bootc@bootc.net>
  8. Remove some patch backup files

    bootc committed May 7, 2012
    Signed-off-by: Chris Boot <bootc@bootc.net>
  9. arm: remove divdi3, it's not necessary at all

    bootc committed May 7, 2012
    This was added for the DWC OTG driver in commit d5ef856. As we've
    removed the dead code from that driver that depends on this, it is no
    longer required at all.
    
    Signed-off-by: Chris Boot <bootc@bootc.net>
  10. dwc_otg: Use atomic memory allocations where necessary

    bootc committed May 7, 2012
    With CONFIG_DEBUG_ATOMIC_SLEEP enabled the USB code complains about 2
    callsites of kmalloc without GFP_ATOMIC. Fix this.
    
    Signed-off-by: Chris Boot <bootc@bootc.net>
  11. dwc_{common_port,otg}: remove documentation from the source tree

    bootc committed May 7, 2012
    There is lots of doxygen-generated bundled source documentation in the
    tree. As this is in the source code, remove this redundant copy.
    
    Singed-off-by: Chris Boot <bootc@bootc.net>
  12. dwc_common_port: remove unused cruft with onerous dependencies

    bootc committed May 7, 2012
    The dwc_common_port library used by the dwc_otg includes bignumber and
    crypto functions which require 64x64 multiplication functions. Remove
    this dead code.
    
    Signed-off-by: Chris Boot <bootc@bootc.net>
  13. added support for TT in the USB driver. Thanks Naren

    Dom Cobley authored and bootc committed Apr 30, 2012
  14. Whitespace tidy. Thanks Roger

    popcornmix authored and bootc committed Apr 26, 2012
  15. Fix (hopefully) for DWC_MEMCPY kernel panics. Thanks to Naren Sankar …

    popcornmix authored and bootc committed Apr 26, 2012
    …for finding this
  16. Replace #if 1 sections by local configuration #defines (tidy)

    Gray Girling authored and bootc committed Apr 16, 2012
  17. Fix harmless base/size typo

    popcornmix authored and bootc committed Apr 16, 2012
  18. Remove most of the alsa debug messages

    popcornmix authored and bootc committed Apr 3, 2012
  19. Add missing header file update for vc_mem iocts

    Dom Cobley authored and bootc committed Mar 29, 2012
  20. Add new ioctl to match latest vc side code

    Dom Cobley authored and bootc committed Mar 26, 2012
  21. Cast to avoid warning

    Dom Cobley authored and bootc committed Mar 26, 2012
  22. Fix problem with dma that could corrupt sdcard, especially when L2 en…

    Dom Cobley authored and bootc committed Mar 20, 2012
    …abled
  23. Enable high resolution timers

    popcornmix authored and bootc committed Mar 17, 2012