Because of lack of time, i must discontinue this project. It will stay online, it will probably work out of the box. Maybe someone can take over development for this project?! Feel free to fork it.
Control GPIOs with a webinterface. Simple, powerful
A easy to use webinterface to control all GPIO in/outputs of your raspberry pi or other device. Enable and disable GPIO just with one button directly with your smartphone, tablet or desktop browser.
- Define GPIOs and watch the status
- Enable/Disable GPIOs with just one click
- Responsive design - Great for desktop, smartphone or tablets
How to contribute
Feel free to send pull requests. Create an issue for a new feature BEFORE you do some coding. We should talk about that before. Translations are pretty straight forward, you can just add them without an issue.
Third Party Requirements
This interface requires
wiringPi to be installed. The command
gpio must be available. It's super easy to install, goto http://wiringpi.com/download-and-install/
It is strongly recommended to use it just with the php command line. Maybe it will not work when running with a webserver like apache or nginx. Just use it as described bellow. Only PHP is required. It is also PHP7 compatible. Try all, depending on your system some packages are not available but that is no problem.
sudo apt-get install php-cli sudo apt-get install php-mbstring sudo apt-get install php5-cli sudo apt-get install php5-mbstring
Download/Clone/Unpack the whole script to a folder you like. Create a php webserver listening on port 4322, you can change the port to whatever you want. Start this with the same user that can execute the
gpio executable. Please do not use apache or other server's to run the php script, it will probably not work.
php -S 0.0.0.0:4322 -t YOURPATHTSCRIPTFOLDER > /dev/null 2>&1 &
Open the webpage with http://IPTOYOURPI:4322
To enable autostart on reboot just add the following line to your crontab. Do this with the same user that can execute the
gpio executable. No
Add the following line to crontab with
crontab -e to start the simple php webserver on reboot
@reboot php -S 0.0.0.0:4322 -t YOURPATHTSCRIPTFOLDER > /dev/null 2>&1 &
- If you have troubles with write permissions just give the
tmpfolder the 777 permission.