Permalink
Switch branches/tags
Nothing to show
Commits on Nov 3, 2011
  1. i2c unlocked

    bticino committed Nov 3, 2011
    This modification allows to use i2c-tools w/o problems.
    
    Raffaele Recalcati <raffaele.recalcati@bticino.it>
Commits on Oct 28, 2011
  1. DaVinci: Basi Board: enabled CONFIG_MODVERSIONS

    agre committed Oct 28, 2011
    Signed-off-by: Simone Agresta <simone.agresta@bticino.it>
  2. DaVinci: Dingo Board: enabled CONFIG_MODVERSIONS

    agre committed Oct 28, 2011
    Signed-off-by: Simone Agresta <simone.agresta@bticino.it>
Commits on Oct 27, 2011
  1. DaVinci: Dingo Board: enabled CONFIG_LOCALVERSION_AUTO

    agre committed Oct 27, 2011
    Signed-off-by: Simone Agresta <simone.agresta@bticino.it>
Commits on Oct 13, 2011
  1. ASoC: zl38005: register caching supported

    bticino authored and sources committed Oct 13, 2011
    Signed-off-by: Raffaele Recalcati <raffaele.recalcati@bticino.it>
  2. ASoC: Davinci: Basi board: reducing absorption

    bticino authored and sources committed Oct 13, 2011
    * pm_loss supported
    	* ext amp powerdown (zarlink zl38005)
    	* ext circuit powerdown (en_audio)
    
    Signed-off-by: Raffaele Recalcati <raffaele.recalcati@bticino.it>
  3. DaVinci: Basi board (audio): reducing absorption

    bticino authored and sources committed Oct 13, 2011
    Signed-off-by: Raffaele Recalcati <raffaele.recalcati@bticino.it>
  4. DaVinci: dm365: added mux setting for gio46

    bticino authored and sources committed Oct 13, 2011
    Signed-off-by: Raffaele Recalcati <raffaele.recalcati@bticino.it>
  5. Davinci: Basi board: enabling IPV6 as module

    bticino authored and sources committed Oct 13, 2011
    Signed-off-by: Fabio Mauri <fabio.mauri@bticino.it>
    Signed-off-by: Raffaele Recalcati <raffaele.recalcati@bticino.it>
  6. Davinci: Dingo board: added 100 usec delay after phy reset

    bticino authored and sources committed Oct 6, 2011
    In the "Reset Timing" paragraph of KSZ8041NL manual is declared that
    "After the de-assertion of reset, it is recommended to wait a minimum
    of 100 us before starting programming on the MIIM (MDC/MDIO) Interface."
    
    Signed-off-by: Raffaele Recalcati <raffaele.recalcati@bticino.it>
  7. Davinci: Basi board: added 100 usec delay after phy reset

    bticino authored and sources committed Oct 5, 2011
    In the "Reset Timing" paragraph of KSZ8041NL manual is declared that
    "After the de-assertion of reset, it is recommended to wait a minimum
    of 100 us before starting programming on the MIIM (MDC/MDIO) Interface."
    
    Signed-off-by: Raffaele Recalcati <raffaele.recalcati@bticino.it>
  8. TI DaVinci EMAC: Added MII register read features

    bticino authored and sources committed Oct 6, 2011
    Signed-off-by: Raffaele Recalcati <raffaele.recalcati@bticino.it>
Commits on Sep 16, 2011
  1. ASoC: Davinci: Basi board: zl38005 write register fail not blocking

    bticino authored and sources committed Sep 16, 2011
    In case of write fails, that seems to be possible during init startup,
    the zl38005 control are added anyway to ASoC interface.
    It is possible that some registers are not initialized in the correct way.
    
    Signed-off-by: Raffaele Recalcati <raffaele.recalcati@bticino.it>
  2. PM loss: ASoC: removed debugging messages

    bticino authored and sources committed Sep 16, 2011
    Signed-off-by: Raffaele Recalcati <raffaele.recalcati@bticino.it>
Commits on Sep 15, 2011
  1. zl38005: Oops bug fix

    bticino authored and sources committed Sep 14, 2011
    With some previous commits the memory allocation needed for reading
    registers is 32bit.
    Even if we need to read 16 bits it is mandatory to allocate an int variable,
    because it is used by the lower levels to write 32 bits of data.
    
    Signed-off-by: Raffaele Recalcati <raffaele.recalcati@bticino.it>
  2. Davinci: Vpbe_encoder: faster clock for NON-STANDARD option

    dabonfa8 authored and sources committed Sep 7, 2011
    Signed-off-by: Davide Bonfanti <davide.bonfanti@bticino.it>
    Signed-off-by: Raffaele Recalcati <raffaele.recalcati@bticino.it>
  3. char: zl38005: firmware update support added

    simocn77 authored and sources committed Jul 25, 2011
    Bug fix in  zl38005_rd_ctrl_reg routine.
    
    Signed-off-by: simone.cianni <simone.cianni@bticino.it>
  4. char: zl38005: Add read and write Imem registers support

    simocn77 authored and sources committed Jul 25, 2011
    Signed-off-by: simone.cianni <simone.cianni@bticino.it>
  5. char: zl38005: 32bit read and write registers support

    simocn77 authored and sources committed Jul 25, 2011
    Signed-off-by: simone.cianni <simone.cianni@bticino.it>
  6. Revert "ASoC: zl38005: workaround to fix the read"

    sources
    sources committed Sep 15, 2011
    The following patches fixes this bug:
    
    commit 88c6893cca02af41484d2296a62a2f175e9c3eff
    Author: Raffaele Recalcati <raffaele.recalcati@bticino.it>
    Date:   Wed Sep 14 02:57:51 2011 +0200
    
        zl38005: Oops bug fix
    
        With some previous commits the memory allocation needed for reading
        registers is 32bit.
        Even if we need to read 16 bits it is mandatory to allocate an int variable,
        because it is used by the lower levels to write 32 bits of data.
    
        Signed-off-by: Raffaele Recalcati <raffaele.recalcati@bticino.it>
    
    commit 5b5f89f29bd25ec3c7ac12dc233262dac36654d9
    Author: simone.cianni <simone.cianni@bticino.it>
    Date:   Mon Jul 25 11:51:47 2011 +0200
    
        char: zl38005: firmware update support added
    
        Bug fix in  zl38005_rd_ctrl_reg routine.
    
        Signed-off-by: simone.cianni <simone.cianni@bticino.it>
    
    commit c8f83f6687e3bdcf5f1d909beddd6f10001198cc
    Author: simone.cianni <simone.cianni@bticino.it>
    Date:   Mon Jul 25 11:51:46 2011 +0200
    
        char: zl38005: Add read and write Imem registers support
    
        Signed-off-by: simone.cianni <simone.cianni@bticino.it>
    
    commit cf934c3a4fe8ee24367da907983b80fa5eefaa70
    Author: simone.cianni <simone.cianni@bticino.it>
    Date:   Mon Jul 25 11:51:45 2011 +0200
    
        char: zl38005: 32bit read and write registers support
    
        Signed-off-by: simone.cianni <simone.cianni@bticino.it>
    
    This reverts commit a412254.
    
    Signed-off-by: Raffaele Recalcati <raffaele.recalcati@bticino.it>
Commits on Sep 2, 2011
  1. DaVinci: Dingo Board: set Hardware Revision in /proc/cpuinfo

    Davide Bonfanti sources
    Davide Bonfanti authored and sources committed Sep 1, 2011
    Signed-off-by: Davide Bonfanti <davide.bonfnati@bticino.it>
  2. DaVinci: Dingo Board: fixed syntax inaccuracy

    Davide Bonfanti sources
    Davide Bonfanti authored and sources committed Sep 1, 2011
    Signed-off-by: Davide Bonfanti <davide.bonfnati@bticino.it>
  3. DaVinci: Dingo Board: passing from tsc2046 to ads7843

    Davide Bonfanti sources
    Davide Bonfanti authored and sources committed Sep 1, 2011
    Signed-off-by: Davide Bonfanti <davide.bonfnati@bticino.it>
Commits on Sep 1, 2011
  1. DM365_IPIPE: messages put under debug conditional config

    bticino authored and sources committed Sep 1, 2011
    Signed-off-by: Raffaele Recalcati <raffaele.recalcati@bticino.it>
Commits on Jul 29, 2011
  1. ASoC: zl38005: workaround to fix the read

    bticino authored and sources committed Jul 29, 2011
    Is necessary at the moment to read twice in order to
    get the right value.
    
    Signed-off-by: Raffaele Recalcati <raffaele.recalcati@bticino.it>
Commits on Jul 28, 2011
  1. ASoC: davinci: add missing break statement

    Rajashekhara, Sudhakar sources
    Rajashekhara, Sudhakar authored and sources committed Jul 20, 2011
    In davinci_vcif_trigger() function, a break() statement was missing
    causing the davinci_vcif_stop() function to be called as a fallback
    after calling davinci_vcif_start().
    
    Signed-off-by: Rajashekhara, Sudhakar <sudhakar.raj@ti.com>
  2. ASoC: davinci: fix codec start and stop functions

    Rajashekhara, Sudhakar sources
    Rajashekhara, Sudhakar authored and sources committed Jul 20, 2011
    According to DM365 voice codec data sheet at [1], before starting
    recording or playback, ADC/DAC modules should follow a reset and
    enable cycle. Writing a 1 to the ADC/DAC bit in the register resets
    the module and clearing the bit to 0 will enable the module. But the
    driver seems to be doing the reverse of it.
    
    [1] http://focus.ti.com/lit/ug/sprufi9b/sprufi9b.pdf
    
    Signed-off-by: Rajashekhara, Sudhakar <sudhakar.raj@ti.com>
    Acked-by: Liam Girdwood <lrg@ti.com>
  3. ASoC: uda1334: fixed syntax bug

    dabonfa8 authored and sources committed Jul 22, 2011
    Signed-off-by: Davide Bonfanti <davide.bonfanti@bticino.it>
  4. DaVinci: Dingo Board: EN_AUDIO not driven by the kernel

    dabonfa8 authored and sources committed Jul 22, 2011
    Signed-off-by: Davide Bonfanti <davide.bonfanti@bticino.it>
    
    ----
    EN_AUDIO must remain on betweeen the play of a song and another so it must
    be set in user space.
  5. DaVinci: Dingo Board: modifyed defconfig

    dabonfa8 authored and sources committed Jul 22, 2011
    Signed-off-by: Davide Bonfanti <davide.bonfanti@bticino.it>
    
    ----
    Added USB-HDRC support and other change in order to make defconfig more similar
    to Basi Board one.
  6. DaVinci: Basi board: tvp5151 reset fix

    bticino authored and sources committed Jul 27, 2011
    This fix allows to read the correct i2c address selection
    for the tvp5151 device.
    
    Signed-off-by: Raffaele Recalcati <raffaele.recalcati@bticino.it>
  7. V4L2: Davinci vpfe: removed useless debug messages

    bticino authored and sources committed Jul 26, 2011
    Signed-off-by: Raffaele Recalcati <raffaele.recalcati@bticino.it>
  8. ASoC: DaVinci Basi board: not disabling EN_AUDIO

    bticino authored and sources committed Jul 26, 2011
    Only Zarling mute used, in order to avoid click
    at the end of playback.
    
    Signed-off-by: Raffaele Recalcati <raffaele.recalcati@bticino.it>
  9. Basi Board: config update

    bticino authored and sources committed Jul 21, 2011
    	* ZL38005 ASoC codec support added
    	* LED gpio support added
    
    Signed-off-by: Raffaele Recalcati <raffaele.recalcati@bticino.it>
  10. DaVinci: Basi board: added led support

    bticino authored and sources committed Jul 21, 2011
    Signed-off-by: Raffaele Recalcati <raffaele.recalcati@bticino.it>