Permalink
Switch branches/tags
Nothing to show
Commits on Jul 31, 2012
Commits on Jul 17, 2012
  1. update omap3_buglabs_defconfig for compat-wireless

    GNUtoo committed Jul 17, 2012
    Without that fix compat wireless can't be built against that
      kernel, resulting in:
      *** "ERROR: your kernel has CONFIG_CFG80211=y, you should have it CONFIG_CFG80211=m if you want to use this thing.".  Stop.
      from compat-wireless.
    
    Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Commits on Jun 27, 2012
  1. Merge pull request #8 from GNUtoo/master

    theterg committed Jun 27, 2012
    Fix unaligned access with newer GCC
Commits on Jun 18, 2012
  1. ARM: 7150/1: Allow kernel unaligned accesses on ARMv6+ processors

    ctmarinas committed with GNUtoo Nov 7, 2011
    Recent gcc versions generate unaligned accesses by default on ARMv6 and
    later processors. This patch ensures that the SCTLR.A bit is always
    cleared on such processors to avoid kernel traping before
    alignment_init() is called.
    
    Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
    Tested-by: John Linn <John.Linn@xilinx.com>
    Acked-by: Nicolas Pitre <nico@linaro.org>
    Cc: stable@vger.kernel.org
    Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Commits on Jun 12, 2012
  1. Merge remote-tracking branch 'dirjud/master'

    theterg committed Jun 12, 2012
    Conflicts:
    	arch/arm/configs/omap3_buglabs_defconfig
    	drivers/bmi/pims/Kconfig
    	drivers/bmi/pims/Makefile
    	include/linux/bmi-ids.h
    	include/linux/bmi/bmi_ioctl.h
Commits on May 24, 2012
Commits on May 11, 2012
  1. simplified battery and rfid module support

    theterg committed May 11, 2012
    -Battery does not yet attempt to load fuel gauges
    -Battery presence not tested
    (Battery effectively only enables charge on the battery slot)
    
    -RFID is a very simple driver, just sets GPIO
    (Everything else for RFID done via userland serial)
  2. add RNDIS_HOST for DOCSIS

    theterg committed May 11, 2012
Commits on Jan 18, 2012
  1. enable hiddev and hidraw by default.

    John Connolly committed Jan 18, 2012
Commits on Nov 8, 2011
  1. DLNA Media (ViXS) BMI Module

    dirjud committed Oct 28, 2011
Commits on Oct 31, 2011
  1. RI #1532: Accelerometer should not be enabled on probe.

    Matt Isaacs committed Oct 31, 2011
    Signed-off-by: Matt Isaacs <izzy@buglabs.net>
Commits on Oct 28, 2011
  1. DECT BMI driver

    dirjud committed with Matt Isaacs Oct 17, 2011
  2. BUGrf4ce driver, now with sysfs reset ability!

    theterg committed with Matt Isaacs Oct 26, 2011
Commits on Oct 7, 2011
  1. add pl2303 to default defconfig (=M)

    John Connolly committed Oct 7, 2011
Commits on Sep 7, 2011
Commits on Aug 17, 2011
  1. add HID_ORTEK to default defconfig

    John E. Connolly committed Aug 17, 2011
Commits on Aug 12, 2011
  1. cleanup of Ortek commit for 2.6.35

    John E. Connolly committed Aug 12, 2011
Commits on Aug 11, 2011
  1. HID: add support for Skycable 0x3f07 wireless presenter

    Jiri Kosina committed with John E. Connolly Mar 21, 2011
    This device contains the very same bug in report descriptor as the
    Ortek ones do (i.e. LogicalMinimum == 1, which is wrong for the key
    array).
    
    As we have more reports for the Ortek devices, we are keeping the driver
    name for now. Apparently there is a chip producer which sells chip with
    this buggy descriptor to multiple vendors. Thus if such reports start
    to come at highger frequency, we'll either have to rename the driver
    accordingly, or come up with more generic workaround.
    
    Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Commits on Aug 1, 2011
  1. Fix input event generation for jacks and volume knobs.

    hanshuebner committed with Matt Isaacs Jul 29, 2011
    The previous version did not actually work.
    
    With this patch, the driver generates keyboard input events
    (KEY_VOLUMEUP and KEY_VOLUMEDOWN) for the volume buttons.  The jacks
    are reported as switches (Line in: SW_JACK_PHYSICAL_INSERT, Mic in:
    SW_MICROPHONE_INSERT, Line out: SW_LINEOUT_INSERT, Headphones:
    SW_HEADPHONE_INSERT).
  2. oh my, the clock used really is CORE_96M_FCLK

    hanshuebner committed with Matt Isaacs Jul 28, 2011
    ... but that also explains why 8000 kHz sample rate does not work.
    Added a check to make sure that the clock divisor is in range.
  3. clean up white space, remove unused code

    hanshuebner committed with Matt Isaacs Jul 27, 2011
  4. Fix clocking of bmi_audio_driver

    hanshuebner committed with Matt Isaacs Jul 27, 2011
    Previously, the bmi_audio driver generated audio only on one channel.
    This was a result of the fact that the bit clock to frame clock ratio
    was wrong.
    
    Due to hardware constraints, the I2S port must be clocked by McBSP, and
    the clock must be derived from the 48Mhz functional clock.  This patch
    changes clock generation and clock divisor calculation so that (almost)
    the right bit clock is generated.
Commits on Jul 21, 2011
  1. bugduino is well tested, adding to buglabs defconfig

    Far McKon committed Jul 21, 2011
Commits on Jul 12, 2011
  1. cleaned up device table a bit for readability

    Far McKon committed with haveahennessy Jul 11, 2011
  2. updated device table. Still tweaking. figured out how to get MODULE_A…

    Far McKon committed with haveahennessy Jul 11, 2011
    …LIAS generated
  3. added bugduino module coe to the kernel build

    Far McKon committed with haveahennessy Jul 1, 2011
Commits on Jun 20, 2011
  1. NAND partition size fixes for Bug Labs Base.

    Matt Isaacs committed Jun 20, 2011
    Signed-off-by: Matt Isaacs <izzy@buglabs.net>
Commits on Jun 17, 2011
  1. NAND initialization fixes for Bug Labs Base.

    Matt Isaacs committed Jun 17, 2011
    Signed-off-by: Matt Isaacs <izzy@buglabs.net>
Commits on Jun 9, 2011
  1. added extended EDID info to sysfs entries vga_edid and dvi_edid for d…

    Far McKon committed with haveahennessy May 31, 2011
    …ebugging monitor problems
Commits on May 27, 2011
  1. BMI: Keep present PIM powered, even if invalid EEPROM is encountered.

    Matt Isaacs committed May 27, 2011
    Signed-off-by: Matt Isaacs <izzy@buglabs.net>
Commits on May 23, 2011
  1. change USB_SUSPEND=y to =N.

    John E. Connolly committed May 23, 2011