Permalink
Switch branches/tags
Nothing to show
Commits on Jun 7, 2013
  1. Merge pull request #10 from GNUtoo/master

    theterg committed Jun 7, 2013
    USB Gadget debug interface
  2. USB: musb: forward debug mode feature to gadget

    sduverger authored and GNUtoo committed Jul 12, 2010
    This is a patch for the musb usb controller.
    
    It allows forwarding of the debug mode feature to its gadget in order
    to be able to act as an ehci debug device.
    
    This patch has been tested on an IGEPv2 board running a 2.6.35-rc1
    kernel.
    
    Signed-off-by: Stephane Duverger <stephane.duverger@gmail.com>
    Cc: Felipe Balbi <felipe.balbi@nokia.com>
    Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
  3. USB: dbpg gadget: dont mask out direction bit

    Sven Schnelle authored and GNUtoo committed Mar 23, 2011
    Stripping the direction bit off will produce an
    invalid descriptor.
    
    Signed-off-by: Sven Schnelle <svens@stackframe.org>
    Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
  4. USB: dbgp gadget: set MaxpacketSize0

    Sven Schnelle authored and GNUtoo committed Mar 23, 2011
    The current code doesn't set it, so linux complains about
    it when connected, and ignores the device:
    
    [104611.068082] usb 1-5: new high speed USB device using ehci_hcd and address 127
    [104611.088368] usb 1-5: Invalid ep0 maxpacket: 0
    
    Signed-off-by: Sven Schnelle <svens@stackframe.org>
    Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
  5. USB: dbgp gadget: fix return value of dbgp_setup

    Sven Schnelle authored and GNUtoo committed Mar 23, 2011
    Current code returns 0 even if it can't handle the request.
    This leads to timeouts when an unhandled request is sent:
    
    Bus 001 Device 003: ID 0525:c0de Netchip Technology, Inc.
    Device Descriptor:
    [..]
    can't get device qualifier: Connection timed out
    [..]
    
    change the code to return EOPNOTSUPP in such cases.
    
    Signed-off-by: Sven Schnelle <svens@stackframe.org>
    Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
  6. USB: g_serial: fix compilation.

    GNUtoo committed Jun 6, 2013
    Without that fix we have errors like:
       u_serial.c:368:4: error: 'TASK_INTERRUPTIBLE' undeclared
    when selecting CONFIG_USB_G_DBGP_SERIAL.
    
    Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
  7. USB: EHCI Debug Port Device Gadget

    sduverger authored and GNUtoo committed Jul 12, 2010
    This is a patch that implements an USB EHCI Debug Device using the
    Gadget API. This patch applies to a 2.6.35-rc3 kernel.
    
    The gadget needs a compliant usb controller that forwards the
    USB_DEVICE_DEBUG_MODE feature to its gadget.
    
    The gadget provides two configuration modes, one that only printk() the
    received data, and one that exposes a serial device to userland
    (/dev/ttyGSxxx).
    
    The gadget has been tested on an IGEPv2 board running a 2.6.35-rc1
    kernel. The debug port was fed on the host side by a 2.6.34 kernel.
    
    Signed-off-by: Stephane Duverger <stephane.duverger@gmail.com>
    Cc: David Brownell <dbrownell@users.sourceforge.net>
    Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Commits on Jul 31, 2012
Commits on Jul 17, 2012
  1. update omap3_buglabs_defconfig for compat-wireless

    GNUtoo committed Jul 17, 2012
    Without that fix compat wireless can't be built against that
      kernel, resulting in:
      *** "ERROR: your kernel has CONFIG_CFG80211=y, you should have it CONFIG_CFG80211=m if you want to use this thing.".  Stop.
      from compat-wireless.
    
    Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Commits on Jun 27, 2012
  1. Merge pull request #8 from GNUtoo/master

    theterg committed Jun 27, 2012
    Fix unaligned access with newer GCC
Commits on Jun 18, 2012
  1. ARM: 7150/1: Allow kernel unaligned accesses on ARMv6+ processors

    ctmarinas authored and GNUtoo committed Nov 7, 2011
    Recent gcc versions generate unaligned accesses by default on ARMv6 and
    later processors. This patch ensures that the SCTLR.A bit is always
    cleared on such processors to avoid kernel traping before
    alignment_init() is called.
    
    Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
    Tested-by: John Linn <John.Linn@xilinx.com>
    Acked-by: Nicolas Pitre <nico@linaro.org>
    Cc: stable@vger.kernel.org
    Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Commits on Jun 12, 2012
  1. Merge remote-tracking branch 'dirjud/master'

    theterg committed Jun 12, 2012
    Conflicts:
    	arch/arm/configs/omap3_buglabs_defconfig
    	drivers/bmi/pims/Kconfig
    	drivers/bmi/pims/Makefile
    	include/linux/bmi-ids.h
    	include/linux/bmi/bmi_ioctl.h
Commits on May 24, 2012
Commits on May 11, 2012
  1. simplified battery and rfid module support

    theterg committed May 11, 2012
    -Battery does not yet attempt to load fuel gauges
    -Battery presence not tested
    (Battery effectively only enables charge on the battery slot)
    
    -RFID is a very simple driver, just sets GPIO
    (Everything else for RFID done via userland serial)
  2. add RNDIS_HOST for DOCSIS

    theterg committed May 11, 2012
Commits on Jan 18, 2012
  1. enable hiddev and hidraw by default.

    John Connolly
    John Connolly committed Jan 18, 2012
Commits on Nov 8, 2011
  1. DLNA Media (ViXS) BMI Module

    dirjud committed Oct 28, 2011
Commits on Oct 31, 2011
  1. RI #1532: Accelerometer should not be enabled on probe.

    Matt Isaacs
    Matt Isaacs committed Oct 31, 2011
    Signed-off-by: Matt Isaacs <izzy@buglabs.net>
Commits on Oct 28, 2011
  1. DECT BMI driver

    dirjud authored and Matt Isaacs committed Oct 17, 2011
  2. BUGrf4ce driver, now with sysfs reset ability!

    theterg authored and Matt Isaacs committed Oct 26, 2011
Commits on Oct 7, 2011
  1. add pl2303 to default defconfig (=M)

    John Connolly
    John Connolly committed Oct 7, 2011
Commits on Sep 7, 2011
Commits on Aug 17, 2011
  1. add HID_ORTEK to default defconfig

    John E. Connolly
    John E. Connolly committed Aug 17, 2011
Commits on Aug 12, 2011
  1. cleanup of Ortek commit for 2.6.35

    John E. Connolly
    John E. Connolly committed Aug 12, 2011
Commits on Aug 11, 2011
  1. HID: add support for Skycable 0x3f07 wireless presenter

    Jiri Kosina John E. Connolly
    Jiri Kosina authored and John E. Connolly committed Mar 21, 2011
    This device contains the very same bug in report descriptor as the
    Ortek ones do (i.e. LogicalMinimum == 1, which is wrong for the key
    array).
    
    As we have more reports for the Ortek devices, we are keeping the driver
    name for now. Apparently there is a chip producer which sells chip with
    this buggy descriptor to multiple vendors. Thus if such reports start
    to come at highger frequency, we'll either have to rename the driver
    accordingly, or come up with more generic workaround.
    
    Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Commits on Aug 1, 2011
  1. Fix input event generation for jacks and volume knobs.

    hanshuebner authored and Matt Isaacs committed Jul 29, 2011
    The previous version did not actually work.
    
    With this patch, the driver generates keyboard input events
    (KEY_VOLUMEUP and KEY_VOLUMEDOWN) for the volume buttons.  The jacks
    are reported as switches (Line in: SW_JACK_PHYSICAL_INSERT, Mic in:
    SW_MICROPHONE_INSERT, Line out: SW_LINEOUT_INSERT, Headphones:
    SW_HEADPHONE_INSERT).
  2. oh my, the clock used really is CORE_96M_FCLK

    hanshuebner authored and Matt Isaacs committed Jul 28, 2011
    ... but that also explains why 8000 kHz sample rate does not work.
    Added a check to make sure that the clock divisor is in range.
  3. clean up white space, remove unused code

    hanshuebner authored and Matt Isaacs committed Jul 27, 2011
  4. Fix clocking of bmi_audio_driver

    hanshuebner authored and Matt Isaacs committed Jul 27, 2011
    Previously, the bmi_audio driver generated audio only on one channel.
    This was a result of the fact that the bit clock to frame clock ratio
    was wrong.
    
    Due to hardware constraints, the I2S port must be clocked by McBSP, and
    the clock must be derived from the 48Mhz functional clock.  This patch
    changes clock generation and clock divisor calculation so that (almost)
    the right bit clock is generated.
Commits on Jul 21, 2011
  1. bugduino is well tested, adding to buglabs defconfig

    Far McKon Far McKon
    Far McKon authored and Far McKon committed Jul 21, 2011
Commits on Jul 12, 2011
  1. cleaned up device table a bit for readability

    Far McKon authored and haveahennessy committed Jul 11, 2011