Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with
or
.
Download ZIP
Browse files

Updated the README with parts list and hookup instructions

  • Loading branch information...
commit ffdec0f8e522477305dde03aad48e05e5a616f35 1 parent 29a7779
@cannikin authored
Showing with 41 additions and 8 deletions.
  1. +41 −8 README.rdoc
View
49 README.rdoc
@@ -1,25 +1,58 @@
-Here's a simple sketch for writing text to a SparkFun SerLCD:
+== Introduction
+
+This sketch will write two lines to the display, one character at a time
+and then blank the screen and start over.
+
+There are several helper methods for you to use, take a look at the code
+for a description of what each does and how to use it.
+
+== Parts
+
+First you'll need an Arduino:
+
+http://www.sparkfun.com/commerce/product_info.php?products_id=666
+
+And the reason we're here, a SparkFun SerLCD:
http://www.sparkfun.com/commerce/product_info.php?products_id=9395
-See it working here:
+And you'll need the Arudino programming environment to get this code
+onto your Arduino:
+
+http://www.arduino.cc/playground/Main/DevelopmentTools
+
+== Connection
+
+_Note: SparkFun sells both a 5V and 3.3V version of the SerLCD. These
+instructions are for the 5V version. If you get the 3.3V version just
+connection the 3V3 pin instead of the 5V pin listed below._
+
+Connect the 5V pin of your Arduino to the VDD pin on the SerLCD. Connect
+GND on the Arduino to GND on the SerLCD. Finally, connect digital pin 1
+(labeled TX on the Arduino) to the RX pin on the SerLCD.
+
+Once everything is hooked up and running, here is what we should see:
http://www.youtube.com/watch?v=5dL57NjfmYM&fmt=22
+== Notice
+
Since you're using the default serial output pin that Arduino also uses
when it's being programmed, a bunch of random characters will be sent to
-the SerLCD, including possibly a control character and then a meaningful
+the SerLCD, including possibly a control character (used to change the
+settings of the display, like the backlight brightness) and then a meaningful
character that will change a setting in the display. Therefore it's usually
best to unhook the LCD, upload your sketch and then plug it back in. The
text may get picked up in the middle of the display, but after a couple of
seconds you'll be in business.
-This sketch will write two lines to the display, one character at a time
-and then blank the screen and start over.
+== Running
-There are several helper methods for you to use, take a look at the code
-for a description of what each does and how to use it.
+Start the Arduino IDE, open up this sketch and click the Upload icon. If
+you followed the instructions above then the SerLCD is not hooked up yet.
+After the RX and TX LEDs stop blinking your code is installed and running.
+Hook up your SerLCD and you should start seeing letters!
-== Thanks
+== Credits
This sketch uses code from http://www.arduino.cc/playground/Learning/SparkFunSerLCD
Please sign in to comment.
Something went wrong with that request. Please try again.