Skip to content
This repository
Fetching contributors…

Octocat-spinner-32-eaf2f5

Cannot retrieve contributors at this time

file 632 lines (312 sloc) 25.089 kb
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631
*2.4.0 Preview Release #1* (2.3.101) June 5, 2008

* Only make deploy:start, deploy:stop, and deploy:restart try sudo as :runner. The other sudo-enabled tasks (deploy:setup, deploy:cleanup, etc.) will now use the :admin_runner user (which by default is unset). [Jamis Buck]

* Make sure triggers defined as a block inherit the scope of the task they are attached to, instead of the task they were called from [Jamis Buck]

* Make deploy:upload use the upload() helper for more efficient directory processing [Jamis Buck]

* Make deploy:upload accept globs [Mark Imbriaco]

* Make sure the host is reported with the output from scm_run [Jamis Buck]

* Make git SCM honor the :scm_verbose option [Jamis Buck]

* Don't follow symlinks when using :copy_cache [Jamis Buck]

* If :mode is given to upload() helper, do a chmod after to set the mode [Jamis Buck]

* Fix load_from_file method for windows users [Neil Wilson]

* Display a deprecation error if a remote git branch is specified [Tim Harper]

* Fix deployment recipes to use the updated sudo helper [Jamis Buck]

* Enhance the sudo helper so it can be used to return the command, instead of executing it [Jamis Buck]

* Revert "make sudo helper play nicely with complex command chains", since it broke stuff [Jamis Buck]

* Make set(:default_shell, false) work for not using a shell on a per-command basis [Ryan McGeary]

* Improved test coverage [Ryan McGeary]

* Fixed "coverage" take task [Ryan McGeary]

* Use upload() instead of put() with the copy strategy [Jamis Buck]

* Revert the "git fetch --tags" change, since it didn't work as expected [Jamis Buck]

* Fix deploy:pending when using git SCM [Ryan McGeary]

* Make sure deploy:check works with :none scm (which has no default command) [Jamis Buck]

* Add debug switch for enabling conditional execution of commands [Mark Imbriaco]


*2.3.0* May 2, 2008

* Make deploy:setup obey the :use_sudo and :runner directives, and generalize the :use_sudo and :runner options into a try_sudo() helper method [Jamis Buck]

* Make sudo helper play nicely with complex command chains [Jamis Buck]

* Expand file-transfer options with new upload() and download() helpers. [Jamis Buck]

* Allow SCP transfers in addition to SFTP. [Jamis Buck]

* Use Net::SSH v2 and Net::SSH::Gateway. [Jamis Buck]

* Added #export method for git SCM [Phillip Goldenburg]

* For query_revision, git SCM used git-rev-parse on the repo hosting the Capfile, which may NOT be the same tree as the actual source reposistory. Use git-ls-remote instead to resolve the revision for checkout. [Robin H. Johnson]

* Allow :ssh_options hash to be specified per server [Jesse Newland]

* Added support for depend :remote, :file to test for existence of a specific file [Andrew Carter]

* Ensure that the default run options are mixed into the command options when executing a command from the cap shell [Ken Collins]

* Added :none SCM module for deploying a specific directory's contents [Jamis Buck]

* Improved "copy" strategy supports local caching and pattern exclusion (via :copy_cache and :copy_exclude variables) [Jamis Buck]


*2.2.0* February 27, 2008

* Fix git submodule support to init on sync [halorgium]

* Add alternative server-centric role definition method [James Duncan Davidson]

* Add support for password prompts from the Mercurial SCM [ches]

* Add support for :max_hosts option in task definition or run() [Rob Holland <rob@inversepath.com>]

* Distributed git support for better operability with remote_cache strategy [voidlock]

* Use a default line length in help text if line length is otherwise too small [Jamis Buck]

* Fix incorrect reference to the 'setup' task in task documentation [rajeshduggal]

* Don't try to kill the spawner process on deploy:stop if no spawner process exists [Jamis Buck]

* Dynamic roles (e.g. role(:app) { "host.name" }) [dmasover]

* Implement Bzr#next_revision so that pending changes can be reported correctly [casret]

* Use a proper export command for bzr SCM [drudru]

* Use checkout instead of merge for git SCM [nuttycom]

* Fix typo in Subversion SCM module, encountered when an update fails [kemiller]

* Fix documentation typo in upload.rb [evolving_jerk]

* Added test case to show that the :scm_command is honored by the git SCM module [grempe]

* Fail gracefully when double-colons are used to delimit namespaces [richie]

* Add support for :git_enable_submodules variable, to enable submodules with the git SCM [halorgium]

* If subversion asks for a password, prompt as a last resort [Jamis Buck]

* Use checkout --lightweight for bzr checkout, instead of branch [michiels]

* Make sure bzr SCM works when revision is head (or unspecified) [michiels]

* Support p4sync_flags and p4client_root variables for Perforce [gseidman]

* Prepare for Net::SSH v2 by making sure Capistrano only tries to load Net::SSH versions less than 1.99.0 [Jamis Buck]


*2.1.0* October 14, 2007

* Default to 0664 instead of 0660 on upload [Jamis Buck]

* Fix deploy:pending to query SCM for the subsequent revision so that it does not include the last deployed change [Jamis Buck]

* Prefer 'Last Changed Rev' over 'Revision' when querying latest revision via Subversion [Jamis Buck]

* Explicitly require 'stringio' in copy_test [mislav]

* When Subversion#query_revision fails, give a more sane error [Jamis Buck]

* Don't run the upgrade:revisions task on non-release servers [Jamis Buck]

* Fix cap shell to properly recognize sudo prompt [Mark Imbriaco, barnaby, Jamis Buck]

* Git SCM module [Garry Dolley, Geoffrey Grosenbach, Scott Chacon]

* Use the --password switch for subversion by default, but add :scm_prefer_prompt variable (defaults to false) [Jamis Buck]


*2.0.100 (2.1 Preview 1)* September 1, 2007

* capify-generated Capfile will autoload all recipes from vendor/plugins/*/recipes/*.rb [Graeme Mathieson]

* Use sudo -p switch to set sudo password prompt to something predictable [Mike Bailey]

* Allow independent configurations to require the same recipe file [Jamis Buck]

* Set :shell to false to run a command without wrapping it in "sh -c" [Jamis Buck]

* Don't request a pty by default [Jamis Buck]

* Add a "match" remote dependency method [Adam Greene]

* Allow auth-caching of subversion credentials to be enabled via :scm_auth_cache [tsmith]

* Don't let a task trigger itself when used as the source for an "on" hook [Jamis Buck]

* Avoid using the --password switch with subversion for security purposes [sentinel]

* Add version_dir, current_dir, and shared_dir variables for naming the directories used in deployment [drinkingbird]

* Use Windows-safe binary reads for reading file contents [Ladislav Martincik]

* Add Accurev SCM support [Doug Barth]

* Use the :runner variable to determine who to sudo as for deploy:restart [Graham Ashton]

* Add Namespaces#top to always return a reference to the topmost namespace [Jamis Buck]

* Change the "-h" output so that it does not say that "-q" is the default [Jamis Buck]


*2.0.0* July 21, 2007

* Make the "no matching servers" error more sane [halorgium]

* Make sure the invoke task gives a sane error when the COMMAND value is omitted [halorgium]

* Make sure variables are conditionally set in the deploy recipes, so as not to clobber values set elsewhere [Jamis Buck]

* Fix "input stream is empty" errors from HighLine on prompt [Jamis Buck]

* Added "synchronous_connect" setting to try and work around SFTP hangs for certain users [Jamis Buck]

* Auto-require the SSH shell service, to avoid race conditions [Jamis Buck]

* Add a millisecond sleep in upload to reduce CPU impact [Jamis Buck]

* Allow the logger to be set via Configuration#logger= [Jamis Buck]

* Allow $CAPISTRANO:HOST$ to be used in filenames to the put command [Jamis Buck]

* Allow execute_on_servers to be called without a current task again [Jamis Buck]

* Put $stdout in sync mode, so that Net::SSH prompts are displayed [Jamis Buck]

* Make sure deploy:check aborts if it fails [Jamis Buck]

* Spelling corrections in docs [Tim Carey-Smith, Giles Bowkett]


*1.99.3 (2.0 Preview 4)* June 28, 2007

* Don't break task descriptions on a period that appears in the middle of a sentence [Jamis Buck]

* Added support for :on_error => :continue in task definitions, allowing tasks to effectively ignore connection and execution errors that occur as they run [Rob Holland]

* Use correct parameters for Logger constructor in the SCM and Strategy base initializers [Jamis Buck]

* Set LC_ALL=C before querying the revision, to make sure the output is in a predictable locale and can be parsed predictably [via Leandro Nunes dos Santos]

* Add :copy_remote_dir variable for the :copy strategy, to indicate where the archive should be copied to on the remote servers [Jamis Buck]

* Make the awk use in the dependencies code work with POSIX awk [mcornick]

* Make variable accesses thread safe [via Adrian Danieli]

* Make user input for yes/no prompts work correctly in the Mercurial module [Matthew Elder]

* Use single quotes to escape semicolon in find command, instead of a backslash [via michael.italia@gmail.com]

* Better quoting of reserved characters in commands [Jamis Buck]

* Make sure Net::SSH versions prior to 1.1.0 still work [Jamis Buck]

* Allow the :hosts and :roles keys to accept lambdas, which will be evaluated lazily to allow runtime selection of hosts and roles in tasks [Jamis Buck]

* Use `which' to test whether a command exists in the remote path, instead of `test -p' [Jamis Buck]

* Make sure the connection factory is established synchronously, to avoid multiple gateway instances being spawned [Jamis Buck]

* Make sure symlink and finalize_update tasks reference the most recent release when called by themselves [Jamis Buck]


*1.99.2 (2.0 Preview 3)* June 15, 2007
 
* CVS SCM module [Brian Phillips]

* Fix typo in Perforce SCM module [Chris Bailey]

* ssh_options < server options when connecting [Jamis Buck]

* Logger defaults to $stderr instead of STDERR [lhartley]

* Use cp -RPp instead of -a in the remote cache strategy

* Make the UploadError exception include an array of the hosts that failed [rob@inversepath.com]

* Allow "empty" roles to be declared [Jamis Buck]

* Mercurial SCM module [Tobias Luetke, Matthew Elder]

* Invoke all commands via sh (customizable via :default_shell) [Jamis Buck]

* Make sure all directories exist on each deploy which are necessary for subsequent commands to succeed, since some SCM's won't save empty directories [Matthew Elder]

* Add :default_environment variable, which is applied to every command


*1.99.1 (2.0 Preview 2)* May 10, 2007

* Fix some documentation typos [eventualbuddha]

* Don't retry failed connections if an explicit auth_methods list is given [Chris Farms]

* Added support for load and exit callbacks, which get invoked when all recipes have been loaded and when all requested tasks have been executed [Jamis Buck]

* Added support for start and finish callbacks, which get invoked when any task is called via the command-line [Jamis Buck]

* Make `capify' understand simple command-line switches [Jamis Buck]

* Make the server definition itself available to SSH channels, rather than just the host name [Jamis Buck]

* Identify servers by their complete credentials in logs, rather than simply by hostname [Jamis Buck]

* Uniquely identify servers based on hostname, port, and username, instead of merely on hostname [Jamis Buck]

* Allow (e.g.) scm_command and local_scm_command to be set in the event of different paths to the scm command on local vs. remote hosts. [Jamis Buck]

* Kill the "deploy:app" namespace and move those tasks into deploy, directly. [Jamis Buck]

* Make sure 'desc' applies to the next defined task, in any namespace. [Jamis Buck]

* Fix shell so that servers for a task are correctly discovered. [Jamis Buck]

* Added before(), after(), and on() callback creation methods. [Jamis Buck]

* Fix broken check! method for some deployment strategies. [Jamis Buck]

* deploy:cold should also run migrations before starting the app [Jamis Buck]

* Make the copy strategy check out to a temporary directory [Jamis Buck]


*1.99.0 (2.0 Preview 1)* April 24, 2007

* Add `capify' script to make it easier to prepare a project for deployment using cap [Jamis Buck]

* Make sure the sudo helper understands the SuSE dialect of the sudo password prompt [Steven Wisener]

* Fix synchronization issue with Gateway initialization [Doug Barth]

* Added opt-in "compat" and "upgrade" recipes for tasks to aid in the upgrade process to Capistrano 2 [Jamis Buck]

* The deployment recipes are now opt-in. Just do 'load "deploy"' in your recipe script. [Jamis Buck]

* Added $CAPISTRANO:HOST$ placeholder in commands, which will be replaced with the name of the host on which the command is executing [Jamis Buck]

* Added -e switch to explain specific task. Added -X to extend -x. Made -h much briefer. Added -T to list known tasks. [Jamis Buck]

* Added namespaces for tasks [Jamis Buck]

* Merged the Configuration and Actor classes, performed various other massive refactorings of the code [Jamis Buck]


*1.4.1* (February 24, 2007)

* Use the no-auth-cache option with subversion so that username/password tokens do not get cached by capistrano usage [jonathan]

* Deprecated upper-cased variables [Jamis Buck]

* Make sure Actor#get does not close the SFTP channel (so subsequent SFTP operations work) [Dov Murik]

* Add :env option to 'run' (and friends) so that you can specify environment variables to be injected into the new process' environment [Mathieu Lajugie]


*1.4.0* (February 3, 2007)

* Use the auth info for subversion more consistently [Jamis Buck]

* Add a "capture" helper, for capturing the stdout of a remote command and returning it as a string [Jamis Buck]

* Add a "get" helper, to pull a file from a remote server to the localhost [bmihelac]

* Fix gateway to actually increment local_port if a port is in use, so that multiple capistrano instances can run at the same time [Mark Imbriaco]

* Refactor the permissions tweaking in update_code to a separate task so that people on shared hosts can override it as necessary [jaw6]

* Set umask during the setup task, so that intermediate directories are created with the proper permissions [NeilW]

* Removed -c/--caprc switch, since the new load order renders it meaningless (just use -f now) [Mike Bailey]

* Make sure the standard recipe loads first, so that .caprc and friends can override what it defines. [Mike Bailey]

* Add support for a system-wide capistrano config file [Mike Bailey]

* Make cold_deploy call update instead of deploy (to avoid invoking the restart task).

* Make the touch command run by update_code set the TZ to UTC, for consistent setting of asset timestamps. [NeilW]

* Fix off-by-one bug in show_tasks width-computation [NeilW]


*1.3.1* (January 5, 2007)

* Fix connection problems when using gateways [Ezra Zygmuntowicz]


*1.3.0* (December 23, 2006)

* Deprecate rake integration in favor of invoking `cap' directly [Jamis Buck]

* Make sure the CVS module references the repository explicitly in cvs_log [weyus@att.net]

* Remove trace messages when loading a file [Jamis Buck]

* Cleaner error messages for authentication failures and command errors [Jamis Buck]

* Added support for ~/.caprc, also -x and -c switches. [Jamis Buck]

* Updated migrate action to use db:migrate task in Rails instead of the deprecated migrate task [DHH]

* Allow SSH user and port to be encoded in the hostname strings [Ezra Zygmuntowicz]

* Fixed that new checkouts were not group-writable [DHH, Jamis Buck]

* Fixed that cap setup would use 755 on the deploy_to and shared directory roots instead of 775 [DHH]

* Don't run the cleanup task on servers marked no_release [Jamis Buck]

* Fix typo in default_io_proc so it correctly checks the stream parameter to see if it is the error stream [Stephen Haberman]

* Make sure assets in images, javascripts, and stylesheets are touched after updating the code, to ensure the asset timestamping feature of rails works correctly [Jamis Buck]

* Added warning if password is prompted for and termios is not installed [John Labovitz]

* Added :as option to sudo, so you can specify who the command is executed as [Mark Imbriaco]


*1.2.0* (September 14, 2006)

* Add experimental 'shell' task [Jamis Buck]

* Display file for external configurations, rather than inspected proc. [Jamis Buck]

* Connect to multiple servers in parallel, rather than serially. [Jamis Buck]

* Add SCM module for Mercurial (closes #4150) [Matthew Elder]

* Remove unused line in SCM::Base (closes #5619) [chris@seagul.co.uk]

* More efficient "svn log" usage (closes #5620) [Anatol Pomozov]

* Better support for key passphrases in the SVN module (closes #5920) [llasram@gmail.com]

* Fix missing default for :local in cvs.rb (closes #3645) [jeremy@hinegardner.org]

* Fix awkward spacing in gemspec file (closes #3888) [grant@antiflux.org]

* Add support for :sudo variable to specify path to sudo (closes #4578) [timothee.peignier@tryphon.org]

* Make previous_release return nil if there are no previous releases (closes #4959) [bdabney@cavoksolutions.com]

* Uncache releases list after update_code is called so that newly released dir is included (closes #3766) [Jamis Buck]

* Allow the subversion scm to accept HTTPS certificates (closes #4792) [Jamis Buck]

* Make sure rollbacks occur within the scope of the task that triggered them [Jamis Buck]

* Fixed the default recipe to work with setups that haven't yet gone pids [DHH]

* Symlink and setup for shared/pids to tmp/pids [DHH]

* Fix some incorrect usage text (closes #4507) [gerry_shaw@yahoo.com]

* Added Actor#stream method that makes it easy to create cross-server streams [DHH]. Example:

    desc "Run a tail on multiple log files at the same time"
    task :tail_fcgi, :roles => :app do
      stream "tail -f #{shared_path}/log/fastcgi.crash.log"
    end

* Make update_code and symlink a macro task under the name "update" for easy of deploy to servers that does not run fcgis [DHH]

* Changed setup, update_code, rollback_code, and symlink to work on all servers instead of only those in the :app, :web, and :db roles. A server can opt out of being part of the release deployment by setting :no_release => true [DHH]

* Added support for :except on task declarations as the opposite of :only [DHH]. Example:

    role :app, "192.168.0.2"
    role :file, "192.168.0.3", :no_release => true

    task :symlink, :except => { :no_release => true } do
      on_rollback { run "ln -nfs #{previous_release} #{current_path}" }
      run "ln -nfs #{current_release} #{current_path}"
    end
    
    cap symlink # will not run on 192.168.0.3

* Deprecate the -r/--recipe switch in favor of -f/--file (for more make/rake-like semantics) [Jamis Buck]

* Fix gemspec to include a dependency on rake 0.7 [Jamis Buck]

* Added respect for ENV["HOSTS"] that'll be used instead of the roles specified in the task definition [DHH]. Example:

    HOSTS=192.168.0.1 cap setup # one-off setup for that server, doesn't need to be prespecified in the recipes file

* Added respect for ENV["ROLES"] that'll be used instead of the roles specified in the task definition [DHH]. Example:

    task :setup, :roles => [ :app, :web, :db ]
      # normally this would run every where
    end
    
    ROLES=app cap setup # this will only run for the app role, overwritting the default declaration

* Added :hosts option to task definition that allows you to specify cross-cutting tasks [DHH]. Example:

    task :setup, :hosts => [ "06.example.com", "01.example.com" ] do
      # this task will happen on 06 and 01 regardless of which roles they belong to
    end

* Fix operator precedence problem in script for touching the revisions.log #3223 [jason.garber@emu.edu]


*1.1.0* (March 6th, 2006)

* Simplify the generated capistrano.rake file, and make it easier to customize

* Use rake-like command-line semantics ("cap deploy", in addition to "cap -a deploy")

* Rename to capistrano

* Make the generated capistrano.rake file use rake namespaces, and include all default tasks

* Look for config/deploy.rb, capfile, and Capfile by default


*1.0.1* (February 20th, 2006)

* Fix broken switchtower_invoke function in switchtower.rake (missing require statement)


*1.0.0* (Feburary 18th, 2006)

* Make CVS module's :local value default to "."

* Add "invoke" task for executing one-off commands

* Make port selection smarter for gateway connections

* Add extension mechanism for custom ST operations and third-party task libraries

* Make ST rails rake tasks more configurable

* Add Actor#current_task and simplify Task#servers

* Add Actor#connect! method for working around lazy connection establishing

* Make sure IO::TRUNC is specified for Net::SFTP uploads (#3510)

* Add branch support to CVS [jeremy@hinegardner.org] (#3596)

* Add bazaar-ng SCM module [Damien Merenne]

* Add optional :svn_username and :svn_password variables

* Allow Proc-valued variables to be set more conveniently (set(:foo) { "bar" })

* Add perforce SCM module [Richard McMahon]

* Add bazaar (v1) SCM module [Edd Dumbill] (#3533)

* Fix stftime format string used in CVS module to be Windows-compatible (fixes #3383)

* Add an better error when a task is run and no servers match the required conditions

* Add default spinner and cold_deploy tasks, and spinner_user variable

* Changed restart_via variable to (boolean) use_sudo

* Only chmod when the revisions.log file is first created

* Make UPPERCASE variables work

* Added rails_env variable (defaults to production) for use by tasks that employ the RAILS_ENV environment variable

* Added Actor.default_io_proc

* Set :actor key on SSH channel instances


*0.10.0* (January 2nd, 2006)

* Handle ssh password prompts like "someone's password:"

* Make CLI#echo available as a class method.

* Add CLI#with_echo.

* Make the default password prompt available as a class method.

# Add documentation for the CLI class.

* Add a sanity check to make sure the correct versions of Net::SSH and Net::SFTP are installed.

* Added a cleanup task to remove unused releases from the deployment directory

* Allow password to be reentered on sudo if it was entered incorrectly

* Use && as the command separator for the checkouts, so that errors are caught early.

* Ping each SSH connection every 1s during command processing so that long-running commands don't cause the connection to timeout.

* Add a 0.01s sleep during the command loop so that the CPU doesn't go ballistic while ST is doing its thing.

* Add :restart_via variable for specifying whether restart ought to use :sudo (default, use sudo)

* Use SFTP for file transfers (if available).

* Add an "update_current" task that will do an svn up on the current release

* Use the :checkout variable to determine what operation to use for svn checkouts (instead of co, like "export").

* The Rails rake tasks now load ST directly, instead of invoking it via system

* Added ssh_options variable to configure the SSH connection parameters #2734 [jerrett@bravenet.com]

* Require Net::SSH 1.0.5


*0.9.0* (October 18th, 2005)

* Use process reaper instead of custom reap script for restarting

* Use -S switch to set variables before reading recipe files #2242

* Have setup.rb create a switchtower.cmd file on Win32 platforms #2402

* Add diff_from_last_deploy to the rails switchtower rakefile template

* Add diff_from_last_deploy task (currently only works with subversion)

* Add deploy_with_migrations task.

* Make the migrate task more customizable.

* If no password is given with the -p switch, prompt for password immediately.

* Do not install a switchtower stub in the script directory. Assume the switchtower executable is in the path.

* Remove trailing newlines from commands to prevent trailing backslash #2141

* Default parameters work correctly with the generator #2218 [Scott Barron]

* Attempt to require 'rubygems' explicitly when running the switchtower utility #2134

* Make default tasks work only on app/db/web roles, so that additional roles may be created for boxes with specific needs without needing to (for instance) deploy the app to those boxes

* Default the application name to "Application" when using --apply-to

* Show the help screen instead of an error when no arguments are given

* Make SwitchTower easier to invoke programmatically via SwitchTower::CLI

* Specify the revision to release via the :revision variable (defaults to latest revision)

* Allow variables to be set via the cli using the -s switch

* Log checkouts to a "revisions.log" file

* Changed behavior of checkout to use the timestamp as the release name, instead of the revision number

* Added CVS module (very very experimental!)

* Works with public keys now, for passwordless deployment

* Subversion module recognizes the password prompt for HTTP authentication

* Preserve +x on scripts when using darcs #1929 [Scott Barron]

* When executing multiline commands, use a backslash to escape the newline
Something went wrong with that request. Please try again.