Skip to content
Find file
Fetching contributors…
Cannot retrieve contributors at this time
108 lines (74 sloc) 3.11 KB
If you read this file _as_is_, just ignore the funny characters you
see. It is written in the POD format (see perlpod manpage) which is
specially designed to be readable as is.
=head1 NAME
perluts - Perl under UTS
This document can be read I<as is>: as F<README.uts>, or you
can read it after you build your package using "man perluts".
The purpose is to help you build Perl for UTS, which, if you
follow these instructions, should be easy, and result in
a solidly working installation.
Perl 5.7.2 (Developmental) or Perl 5.8.x (forthcoming) for UTS
NOTE: Some sites have redefined the way uname works, and if yours
does this, special steps must be taken so that Configure can
recognize your system as a UTS system. To see if you are in
this category, issue the command "uname -a". It should look
something like:
uts juno 4 4.4 9672 370
At any rate, the first field should be "uts". If this is not
the case; supposing it is, say telcoUTS, create a script, uts/uname
(i.e. uname, in the subdirectory "uts" of the main Perl source dir):
# uname
/usr/bin/uname "$@" | sed -e 's/^telcoUTS/uts/'
and when you execute Configure, do it as below, except for adding
PATH=uts:$PATH as a prefix. I.e. do:
PATH=uts:$PATH ./Configure ...
There is no need to do an interactive configure, just type
./Configure -de [-Dusedevel] [-Doptimize=-g ] 2>&1 | tee Conf.out
"-Dusedevel" may be required to configure Perl 5.7.2 non-interactively.
Use -Doptimize=-g if you want to run Perl under sdb or gdb, OR
if you want to be able to use the -D command line flags to perl,
which are occasionally useful in debugging perl scripts.
In this and the following steps, the "2>&1 | tee XXX.out" records all
output from the process, which will be useful if anything unexpected
goes wrong.
Then do the compilation with
make 2>&1 | tee make.out
Finally, test using
make test 2>&1 | tee make-test.out
In the output, the only failures you should see should look like:
lib/Math/BigInt/t/bigfltpm.........Use of uninitialized value ...
FAILED at test 57
lib/Math/BigInt/t/bigintpm.........FAILED at test 204
lib/Math/BigInt/t/mbimbf...........Use of uninitialized value ...
Illegal division by zero at ../lib/Math/BigInt/ line 314.
FAILED at test 71
lib/Math/Complex...................exp: OVERFLOW
FAILED at test 250
lib/Math/Trig......................exp: OVERFLOW
lib/Net/servent....................FAILED at test 0
This means that everything passes except for some problems in the
packages "Math::BigInt", "Math::Complex", and "Math::Trig".
The lib/Net/servent failure seems to be a bug in the test
program. To confirm this, from the main Perl source dir, do:
LD_LIBRARY_PATH=`pwd` ./perl -Ilib lib/Net/servent.t
and it should output
ok 1
ok 2
ok 3
=head1 Installing the built perl on UTS
Run the command "make install"
=head1 AUTHOR
Hal Morris
UTS Global LLC
Something went wrong with that request. Please try again.