Switch branches/tags
Nothing to show
Find file
Fetching contributors…
Cannot retrieve contributors at this time
204 lines (154 sloc) 7.37 KB


Kelxquoia is an esoteric programming language designed by Chris Pressey on December 23, 2010. It is a self-modifying, in fact self-destroying, language which combines grid-rewriting with remotely fungeoid playfield traversal.

Program State

There is an instruction pointer (IP) with a location and a direction in an unbounded, two-dimensional Cartesian grid of symbols. As the IP passes over symbols, it executes them and erases them from the playfield (overwrites them with blanks). The program ends when the IP travels off into space, never to return.

There is a stack. The stack may contain objects of two types, grids and rows. Instructions expect certain types of objects to be present on the stack; if the types are incorrect, or insufficient elements are on the stack, the instruction has no effect. (That means that the state of the stack, too, is unchanged by the instruction.)


If the IP passes over any symbol x, and there is a ' symbol to the right of the IP's line of travel, a row is popped from the stack, the symbol x is appended (to the rightmost position) of that row, and the new row is pushed back onto the stack. The symbol x is erased, but the ' is not.

The instruction - pushes an empty row onto the stack.

The instruction + pushes an empty grid onto the stack.

The instruction * pops a row, pops a grid, appends the row to the bottom of the grid, then pushes the new grid. Note that the left-hand edges of every row in a grid line up, but their right-hand edges need not do that. When considered as a grid, all unused squares in the grid are considered to contain blanks.

The instruction ? pops a row from the stack, appends a wildcard to it, and pushes the new row back onto the stack.

The instruction / pops a grid called the replacement, then pops a grid called the pattern, then replaces all non-overlapping occurrences of the pattern in the playfield with the replacement. All overlapping occurrences are untouched, to avoid ambiguity. A few things to note:

  • The replacement must not be any larger than the pattern. If it is, the two grids remain popped but the instruction otherwise has no effect.
  • If the replacement is smaller than the pattern, it is padded with blanks (to the bottom and to the right.)
  • There can be at most one wildcard in the pattern. If there are no wildcards in the pattern, there should be none in the replacement. If either of these conditions does not hold, the two grids remain popped but the instruction otherwise has no effect.
  • Any symbol in the playfield may match the wildcard in the pattern. Where-ever there is a wildcard in the replacement, the symbol that matched the wildcard in the pattern is substituted instead.
  • If the executed / instruction itself is replaced by something during this process, whatever it was replaced with will not be erased.
  • If the pattern consists only of blanks, or only wildcards, the implementation may choose to halt the program rather than filling the entire playfield with replacement.

The instructions >, <, ^, and v cause the IP to begin travelling east, west, north, and south, respectively.

The instruction ! clears the stack.

Executing any other symbol as an instruction has no effect.

The symbol $ indicates the initial position of the IP. The initial direction of the IP is always east. If there are multiple $ symbols in the source code, it is an error and the program is not executed.

Computational Class

The author believes Kelxquoia to be Turing-complete because:

  • Repeated use of the / instruction can be used to implement non-overlapping grid-rewriting, which can simulate an arbitrary Turing machine; see below.
  • Assuming all instructions that have been erased after execution can be restored, the IP can travel in a loop, to indefinitely apply the / rewrites.
  • Instructions that have been erased after execution can be restored by further rewrites of a certain, fixed form.
  • To effect a conditional halt, a critical direction-changing instruction can be selectively not restored to the playfield.

Simulating a Turing Machine with non-Overlapping Grid-Rewriting

In this section we show how a Turing machine can be simulated with grid-rewriting where we can match only non-overlapping instances of a pattern. (The addition of wildcards does not add any computational power, but does add some expressivity, as it can reduce the number of rewrites that need to be made.) The tape symbols of our machine will be the digits 0-9, and the states of the finite control will be labeled with the lowercase letters a-z. In addition we will use the . symbol to depict whitespace, for clarity.

We can depict each tape cell with the following 2x2 grid of symbols:


We arrange the tape cells horizontally in the playfield, and we make sure there is only one such tape:


We have rewriting rules that extend the tape in either direction, as needed:

?T..  ->  ?T0T
T+..      T+T+

..?T  ->  0T?T
..T+      T+T+

We situate the tape head directly below the cell of the tape we wish to affect, and again we make sure there is only one such head. The tape head looks like the following 2x2 grid:


The upper-left corner contains the finite control label, and the lower-right corner contains a "movement indicator". When the head is ready to move, the movement indicator is changed, and we have the following two rewrite rules implement the move:

?H..  ->  ..?H
HR..      ..HN

..?H  ->  ?H..
..HL      HN..

Now, for each transition rule in the Turing machine, we can compose a grid-rewriting rule which implements it. For example, "In state f, if there is a 5 on the tape, write a 7 and move left" corresponds to the rule:

5T  ->  7T
T+      T+
fH      fH
HN      HL

From this description it should be fairly evident that this both simulates a Turing machine (not quite arbitrary, but certainly with sufficient symbols and states to be universal) and that the non-overlapping condition poses no obstacle (if the tape and head are arranged as described, these patterns will never match overlapping instances of the playfield).


The following example replaces the words WOW and POP, at the bottom of the program, with BOB and MOM:

   '  '   '  '

The state of the playfield at the end of the program would be:

   '  '   '  '

The following example rewrites some stuff then restores the instructions that did the rewriting:

 +-0 0*+-1*/+-?*-R*- *+-?*-R*-?*/
$+-0 0*+-1*/+-?*-R*- *+-?*-R*-?*/
   ' '   '       '  '      '   

 00 00 00 00

The following example extends the previous example to an infinite loop:

 >+-0 0*+-1*/+-?*-R*- *+-?*-R*-?*/v
$>+-0 0*+-1*/+-?*-R*- *+-?*-R*-?*/v
    ' '   '       '  '      '   
             '         '  '     
 ^      /*?-*P-*?-+*?-*P-* -+     <
 ^      /*?-*P-*?-+*?-*P-* -+     <

 00 00 00 00


The contents of this document were taken from the Kelxquoia article on the wiki, which is in the public domain.