Skip to content
Read telemetry from a QuadCopter FlightControl CC3D via UAVTalk protocol
Branch: master
Clone or download
cdaller Merge pull request #3 from kochge/master
removed simpleTimer and used SerialEvent for reading data
Latest commit c2b1149 Aug 25, 2015
Permalink
Type Name Latest commit message Commit time
Failed to load latest commit information.
UAVTalk * removed simpleTimer Aug 25, 2015
LICENSE
README.md

README.md

Arduino-UAVTalk-Blinkenlights

Read telemetry from a QuadCopter FlightControl CC3D via UAVTalk protocol

The communication between CC3D and Arduino is copied from minoposd project (https://code.google.com/p/minoposd/) - Thanks a lot!

Hardware

We are using a Arduino Nano, so I guess the source will run on any other Arduino as well.

Wiring

Configure the main port of CC3D to send telemetry on 57600 baud (default setting) and connect the green/yellow cable (in my case) to the RX/TX port of the arduino. We powered the arduino directly with the 3S LiPo from the copter (raw VIn).

You can’t perform that action at this time.