Skip to content
Permalink
Branch: master
Find file Copy path
Find file Copy path
Fetching contributors…
Cannot retrieve contributors at this time
279 lines (113 sloc) 8.02 KB

alt text alt text

trSEQ : tr style 16 steps SEQ with trig input per step

  main functions : cf. Fundamental/SEQ3

  steps :   each step can be turned on/off manually by clicking it or can be automated

              and/or externally controlled thru its own trig input

              you can use an external keyboard, pad controller, or third party app to use your computer keyboard

              as a midi keyboard, via Core/midi-trigger-to-CV or Core/midi-to-CV

              or any CV/trigger source/modifier like Audible/Bernouilli's gate for randomness

  tap in :  input notes by clicking on the pad or sending trigs or sustained gates to the corresponding input

              (cf. steps)

  clear :   same as "tap in" but for deleting notes

alt text

alt text

alt text

STEPS : variable quantiser

    originally conceived as a companion for PLAYER,

    used between a LFO or a SEQ CV out and PLAYER's start input

    it will quantize 0 to 10 Volts CV to regular steps,

    allowing for regular slicing of breakbeat loops or anything else

alt text

alt text

PLAYER : sampler [mod from Bidoo's OUAIve]

  use right click menu to select a .wav or .aif sample (some hi-res or compressed ones won't open)

  gate :      the sample will be played while the gate is open (i.e. input > 0 V.)

                try retrigger mode (right click menu) with most seq's

                or use an enveloppe or ML gate delay to have a correct gate for your needs

  start :     use knob to choose start point and/or attenuverted CV input

                (don't forget to "open" the attenuverter)

  speed :   same as start but for speed, very low setting will play reverse (from start point)

  trick :     use a square fast LFO on gate input and a saw LFO on start input to get dirty time stretch

alt text

alt text

PEAK : Peak limiter

  threshold :   turn it down from 10 V. to 0 V. until it lights up as the limiter acts

  make up :    turn it up to adjust gain, lights up when signal gets over 10 V.

  trick :     if input is unplugged, PEAK will output screen's voltage

                it can also be use as an attenu/amp.

alt text

alt text

CUBE : a blank panel turned weird module

  inputs :  each input receives CV to controle the rotation speed on a different axis

              modulate with a LFO, or any other signal

  output :  is Z coordinate of one of the points of the cube

              found it quite unpredictable, especially when inputs are modulated

              Pretty and experimental :)

alt text

FOUR : 4 trigged solos/mutes

  each signal "line" can be turned on/off or soloed, manually and/or triggered thru its own trig input

              you can use an external keyboard, pad controller, or third party app to use your computer keyboard

              as a midi keyboard, via Core/midi-trigger-to-CV or Core/midi-to-CV

              or any CV/trigger source/modifier like Audible/Bernouilli's gate for randomness

alt text

alt text

alt text

MONO STEREO MASTER : modular mixer

  you can use them in combination to make a mixer

  with any number of mono and/or stereo channels, sub groups, etc.

  in :        gets your mono or stero signal in

  out :       on MONO, duplicates the signal post gain, post on and solo,

                for redirection to an FX (reverb, delay, ...) or any other use

  gain :      multiplies the in signal by 0 to 2, 1 is at 12 o'clock/reset position

                beware of your levels, a red light will bright up over 10 V.

  gain input : over-rides gain knob and turns 0 to 10 V. input

                into 0 to 2 multiplier (1 being 5 V.)

                for automation and/or external control

  on :        switches the signal of this channel on/off

  on input :  inverts on state on trig

                for automation and/or external control

  solo :      turns off un-soloed channels in a solo-group, cf. solo-link

  solo input : inverts solo state on trig

                for automation and/or external control

  pan :       attenuates one side of the stereo signal

  pan input : over-rides pan knob and turns 0 to 10 V. input into left to right (5 being center)

                for automation and/or external control

  stereo bus : stereo signal gets in

                adds gained & pan'ed input signal

                stereo signal gets out to next channel or master

  S-L :       solo link, make a solo group so that solo'ing a channel or many will turn off others

                by linking them so they can communicate,

                don't forget to link the last to the first.

alt text

METRO : master clock and metronome

  BPM :        sets the beat per minute tempo

  BPM input :   over-rides BPM knob

                 turns 0 to 10 V. into 0 to 300 bpm

  on :         turns METRO on/off, starts on first beat (most of the times)

  on input :    turns METRO on/off on trig

  reset :      sets METRO back to 1st beat without stoping it

                 use to reset dividers and seqs on the fly

  mes. light : will light up on 1st beat out of 4

  beat light : will light up on every beat

  head speaker : outputs audio metronome

                 TOC-toc-toc-toc-TOC-toc-toc-toc-TOC-toc...

  start :      will output a trig on start or reset

  x 12 :      will output 12 trigs per beat

EACH : clock divider

  left circuit 'start' will receive and duplicate

               start/reset trigs to its ouputs

  right circuit 'x 12' will receive and duplicate

               trigs stream ('x 12' from METRO) to its output

               and 1 out of DIV. (knob/screen) trig to the middle output

               allow sync'ing of seqs

               3 will give you 1/4 of beat, 4 triolets, 6 half beat and so on

  DIV. input : over-rides DIV. knob

               turns 0 to 10 V. to 1 to 12 divs

  trick :    chain EACHs to trig events every mesure, 4 mesures or 16 mesures

alt text

PATCH : patch bay

  mainly here to take cables out of the view

  signals follow the lines between inputs and outputs

DAVE : blank panel

please, DONATE so i can buy other devs'modules, and thanks to those who already did :)

You can’t perform that action at this time.