Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with
or
.
Download ZIP
Fetching contributors…

Cannot retrieve contributors at this time

144 lines (111 sloc) 5.506 kB
== link:index.html[Index] -> link:cookbook.html[Cookbook]
///////////////////////////////////////////////////////////////////
Last checked:
* Cherokee 0.99.25
* phpMyAdmin 3.1.2
///////////////////////////////////////////////////////////////////
Cookbook: Setting up phpMyAdmin
-------------------------------
Setting up link:http://www.phpmyadmin.net[phpMyAdmin] to work with
Cherokee is trivial, as Cherokee already provides everything that is
needed to work.
According to phpMyAdmin's documentation, the software requirements
are just:
* PHP:
- You need PHP 5.2.0 or newer, with session support and the
Standard PHP Library (SPL) extension.
- To support uploading of ZIP files, you need the PHP zip
extension.
- For proper support of multibyte strings (eg. UTF-8, which is
currently default), you should install mbstring and ctype
extensions.
- You need GD2 support in PHP to display inline thumbnails of
JPEGs ("image/jpeg: inline") with their original aspect ratio
- When using the "cookie" authentication method, the mcrypt
extension is strongly suggested for most users and is required
for 64–bit machines. Not using mcrypt will cause phpMyAdmin to
load pages significantly slower.
* MySQL 5.0 or newer (details);
* Web browser with cookies enabled.
This means that you don't need to modify Cherokee at all provided you
have PHP with MySQL support.
Simply use Cherokee-Admin's phpMyAdmin Wizard, located under the
`Database` category. It checks for the presence of phpMyAdmin, so you
better have the package installed prior to using the Wizard, or else
the Wizard will not let you proceed.
Express setup
~~~~~~~~~~~~~
The only thing you need to do is make phpMyAdmin accessible by
Cherokee and all the script files must have permissions suitable for
the user running Cherokee.
Most platforms provide packages with all that you need. For Debian
based Linux distributions, You can issue the following commands as
root (or through sudo) and the whole installation will take a matter
of seconds.
.Debian installation
-----
# apt-get install php5-cgi php5-mysql mysql-server-5.0 phpmyadmin
-----
Since Cherokee doesn't appear in the list of web servers provided by
the package installation script, select any of them to proceed with
phpMyAdmin's configuration.
The commands above assume you are running Cherokee as `root` and that
your web server's `document root` is `/var/www`.
If you were to run it as `www-data`, simply change the script's
owner:
.Script owner
-----
# chown -R www-data:www-data /usr/share/phpmyadmin
-----
Now point your web browser to `http://localhost/phpmyadmin`, and use
the MySQL user information to access the databases.
.phpMyAdmin in action
image::media/images/cookbook_phpmyadmin.png[phpMyAdmin in action!]
Generic setup
~~~~~~~~~~~~~
If your platform doesn't provide phpMyAdmin, download it from the
link:http://www.phpmyadmin.net/home_page/downloads.php[main download
site] and follow the `Quick Install` notes in the
link:http://www.phpmyadmin.net/documentation/[phpMyAdmin
documentation]. As before, you simply need to make the program
accessible to your web server, so simply use the Wizard and fill in
the required information. Alternatively you can either install
directly under your `document root` or make a symbolic link.
[[wizard]]
Configuring with the Wizard
~~~~~~~~~~~~~~~~~~~~~~~~~~~
There is also a wizard to assist you with your configuration. Once
phpMyAdmin is installed, simply access one of your virtual servers in
`Cherokee-Admin`. Then, access the `Behavior` tab and trigger the
`Rule panel` by clicking on the `Rule Management` button. Once in
there, use the `Add` button at the top of the panel to see the
available wizards, and choose the phpMyAdmin wizard that can be found
under the `Web Applications` category.
Considerations
~~~~~~~~~~~~~~
* Cherokee's default setup encodes the output of PHP with gzip, which
in turn improves the server's performance. You will get garbled
output if you also enable phpMyAdmin's gzip compression, since your
web browser will be receiving content encoded twice.
* If you are using the auth_type `config`, it is suggested that you
protect the phpMyAdmin installation directory because using config
does not require a user to enter a password to access the phpMyAdmin
installation. Use of an alternate authentication method is
recommended, either by switching to using auth_type cookie or http,
or alternatively by using Cherokee's authentication features. Refer
to the link:http://www.phpmyadmin.net/documentation/[phpMyAdmin
documentation] for more details on the former, or to our
link:cookbook_authentication.html[authentication recipe] for the
latter.
* It is generally good idea to protect public phpMyAdmin installation
against access by robots as they usually can not do anything good
there. You can do this using robots.txt file in root.
* The Wizard already takes care of this, but if you have installed it
manually you should deny access to the `./libraries` and `./setup/lib`
subfolders in Cherokee's configuration. Such configuration prevents
from possible path exposure and cross side scripting vulnerabilities
that might happen to be found in that code. To do so, configure
directory-type rules for those and manage them with the `HTTP Error`
handler.
.Handler HTTP Error
image::media/images/cookbook_phpmyadmin_denied.png[Protected directories]
Jump to Line
Something went wrong with that request. Please try again.