New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

LimeSDR Mini and CubicSDR #692

Open
righthalfplane opened this Issue Dec 5, 2018 · 3 comments

Comments

Projects
None yet
2 participants
@righthalfplane
Copy link

righthalfplane commented Dec 5, 2018

Good News - LimeSDR Mini works with CubicSDR-0.2.5-Darwin.dmg on MacOS Sierra -
- it is missing some features, but that is libLimeSuite's fault.

Bad News - CubicSDR-0.2.5-x86_64.AppImage crashed with the LimeSDR Mini on ubuntu 16.04

Good News - CubicSDR-0.2.3 works with LimeSDR Mini after using after installing LimeSuite-master.zip on ubuntu 16.04

Good News - CubicSDR-0.2.4 works with LimeSDR Mini after using after installing LimeSuite-master.zip on on MacOS Sierra and MacOS High Sierra

A Side Note - gqrx works with LimeSDR Mini on ubuntu 16.04 and has more features.

@cjcliffe cjcliffe self-assigned this Jan 3, 2019

@righthalfplane

This comment has been minimized.

Copy link
Author

righthalfplane commented Jan 9, 2019

LimeSDR Mini works with CubicSDR-0.2.4-win64.exe on windows 7 after installing the driver - https://wiki.myriadrf.org/LimeSDR-Mini_driver_installation. This installation process did not work for me and I had to start at "Printers and Devices" and do a install from disk for the LimeSDR Mini. The only problem with CubicSDR-0.2.4-win64 seem to be it would not turn anything below about 30 MHZ. The LimeSDR Mini is supposed to go down to 10MHZ.

@righthalfplane

This comment has been minimized.

Copy link
Author

righthalfplane commented Jan 9, 2019

CubicSDR-0.2.5-Darwin.dmg has two problems on MacOS Sierra. It generates out of range error messages for any frequency below about 30 MHZ and it gives warnings about usb pipes not being closed. I have another programs that uses SoapySDR and it has no problem tuning below 30 MHZ with no problem, but it does give the warning message "libusb: warning [libusb_exit] application left some devices open"


CubicSDR output -

ERROR] SetFrequencySXR(29.1833 MHz) - required VCO frequency is out of range [3800-7714] MHz
[ERROR] SetFrequencySXR(28.1833 MHz) - required VCO frequency is out of range [3800-7714] MHz
Terminating SDR thread..
SDRThread::readStream(): 3.1 iqDataOutQueue output queue is full, discard processing of the batch...
readLoop() ended.
libusb: warning [darwin_abort_transfers] aborting all transactions on interface 1 pipe 4
libusb: warning [darwin_abort_transfers] aborting all transactions on interface 1 pipe 4
libusb: warning [darwin_abort_transfers] aborting all transactions on interface 1 pipe 4
libusb: warning [darwin_abort_transfers] aborting all transactions on interface 1 pipe 4
device deinit()
SDR thread done.
Terminating SDR post-processing thread..
Terminating All Demodulators..
Terminating Visual Processor threads..
Garbage collected demodulator instance '28.183'...
Application termination complete.
libusb: warning [libusb_exit] application left some devices open

@cjcliffe

This comment has been minimized.

Copy link
Owner

cjcliffe commented Jan 21, 2019

@righthalfplane thanks for the reports; I'll try building against the latest limesuite for the next build

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment