Skip to content
Permalink
Fetching contributors…
Cannot retrieve contributors at this time
132 lines (84 sloc) 3.85 KB

|CL-ATTR| on Parallels* Desktop for Mac*

This page explains how to run |CL| Server in :abbr:`CLI (command-line interface)` mode as a guest OS in Parallels Desktop 14 for Mac.

Parallels Desktop for Mac is virtualization software that allows other operating systems, such as Linux, to run side-by-side with macOS*.

Prerequisites

  • Install Parallels Desktop 14 for Mac.

Download ISO image

  1. Download a live-server ISO installation file from https://clearlinux.org/downloads. This guide uses |CL| Server 30140 as its example.

  2. Unzip the ISO image with the command:

    gunzip clear-30140-live-server.iso.xz

Initialize new VM

Start Parallels and initialize your :abbr:`VM (Virtual Machine)` with the following steps.

  1. Go to :menuselection:`File > New`.

  2. In the opening dialog window, select :guilabel:`Install Windows or another OS from a DVD or image`, then click :guilabel:`Continue`. (See Figure 1.)

    Parallels opening dialog

    Figure 1: Parallels opening dialog

  3. On the next screen, select :guilabel:`Image File`, then click :guilabel:`Select a file...` as shown in Figure 2.

    Dialog to select source for VM

    Figure 2: Dialog to select source for VM

  4. Select your ISO file. The system displays the warning message "Unable to detect operating system", as shown in Figure 3. This message is expected and can be ignored. Click :guilabel:`Continue`.

    Warning that OS is not detected

    Figure 3: Warning that OS is not detected

  5. You are prompted to select your OS, as shown in Figure 4. Select :menuselection:`More Linux > Other Linux` from the drop-down menu and click :guilabel:`Continue`.

    Select OS from drop-down menu

    Figure 4: Select OS from drop-down menu

  6. Name your VM and check :guilabel:`Customize settings before installation`. (See Figure 5.)

    Name and Location screen

    Figure 5: Name and Location screen

  7. Click :guilabel:`Create`. The Configuration window for the new VM opens, as shown in Figure 6.

    Select :menuselection:`Hardware > Boot Order`.

    VM Configuration window

    Figure 6: VM Configuration window

  8. Expand :guilabel:`Advanced Settings`. Set :guilabel:`BIOS` to “EFI 64-bit” and in the :guilabel:`Boot flags` field, enter “vm.bios.efi=1” as shown in Figure 7.

    Advanced configuration settings

    Figure 7: Advanced configuration settings

  9. Close the Configuration window and click :guilabel:`Continue`.

    If camera and microphone access restriction warnings are displayed, you can ignore them.

Install |CL| on VM

  1. Follow the prompts and install |CL| using the text-based installer as shown in Figure 8.

    Refer to :ref:`bare-metal-install-server` for additional installation instructions.

    On screen instructions from text-based installer

    Figure 8: On screen instructions from text-based installer

  2. After installation, reboot the VM. You are prompted to log in, as shown in Figure 9. Log in with the credentials you used when you installed |CL| on the VM.

    Log in prompt

    Figure 9: Log in prompt

Congratulations! You have successfully set up a |CL| VM using Parallels Desktop for Mac.

You can’t perform that action at this time.