diff --git a/docs_robots/outdoor_robots/husky/a300/user_manual_husky.mdx b/docs_robots/outdoor_robots/husky/a300/user_manual_husky.mdx
index 6f92f484..8d9e0185 100644
--- a/docs_robots/outdoor_robots/husky/a300/user_manual_husky.mdx
+++ b/docs_robots/outdoor_robots/husky/a300/user_manual_husky.mdx
@@ -1701,7 +1701,27 @@ See [Husky A300 Troubleshooting](troubleshooting_husky) for details on Husky tro
 
 ---
 
-## Declarations
+## Standards Compliance
+
+- CE-marked
+   - EN 61326-1:2013
+   - EN 301 489-1 V1.9.2
+   - EN 61010-1:2010, EN 61010-1:2010/A1:2019/AC:2019-04, EN 61010-1:2010/A1:2019
+   - EN 301 489-1 V1.9.2
+   - EN 301 893 V2.1.1
+   - EN 300 328 V2.2.2
+- FCC Part 15 Subpart B
+- FCC Part 18
+- ICES-002
+- ICES-003
+
+### Declarations
+
+This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
+(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
+including interference that may cause undesired operation.
+
+CAN ICES-003(A) / NMB-003(A)
 
 :::note
 
@@ -1711,86 +1731,6 @@ invalidate the markings and may require additional conformity assessments.
 
 :::
 
-### FCC Supplier's Declaration of Conformity
-
-**47 CFR § 2.1077 Compliance Information**
-
-**Husky A300**
-
-**Responsible Party**
-
-Rockwell Automation, Inc.
-1201 South Second Street
-Milwaukee, Wisconsin
-53204-2410
-
-**Point of Contact**
-
-Ryan Gariepy, CTO (OTTO Motors and Clearpath Robotics)<br/>
-ryan.gariepy@rockwellautomation.com<br/>
-1-844-733-6886
-
-This device complies with Part 15 of the FCC Rules.
-
-Operation is subject to the following two conditions: (1) this device may
-not cause harmful interference, and (2) this device must accept any
-interference received, including interference that may cause undesired operation.
-
-Contains Transmitter Module FCC ID: PD9AX210NG
-
-Changes or modifications not expressly approved by Clearpath Robotics Inc. could void
-the user's authority to operate the equipment.
-
-This equipment has been tested and found to comply with the limits for a Class A
-digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
-reasonable protection against harmful interference when the equipment is operated in a
-commercial environment. This product generates, uses, and can radiate radio frequency
-energy and, if not installed and used in accordance with the manufacturer's instruction
-manual, may cause harmful interference with radio communications. Operation of this
-product in a residential area is likely to cause harmful interference, in which case you will
-be required to correct the interference at your own expense.
-
-These limits are designed to provide reasonable protection against harmful interference in
-a non-residential installation. However, there is no guarantee that interference will not
-occur in a particular installation.
-If this equipment does cause harmful interference to radio or television reception, which can
-be determined by turning the equipment off and on, the user is encouraged to try to correct
-the interference by one or more of the following measures:
-  - Reorient or relocate the receiving antenna.
-  - Increase the separation between the equipment and receiver.
-  - Connect the equipment into an outlet on a circuit different from that which the receiver is connected.
-  - Consult the dealer or an experienced radio/TV technician for help.
-
-FCC Radiation Exposure Statement: This product complies with FCC §2.1091(b) for mobile RF exposure limits,
-set forth for an uncontrolled environment and is safe for the intended operation as described in this manual.
-Per FCC requirements, maintain a distance of more than 8 inches (20 cm) between any person and the host device.
-
-### Innovation, Science and Economic Development Canada (ISED) Compliance Notice
-
-Contains Transmitter Module IC: 1000M-AX210NG
-
-This device contains a license-exempt transmitter/receiver that complies with Innovation,
-Science and Economic Development (ISED) Canada's license-exempt RSS(s). Operation is
-subject to the following 2 conditions: (1) this device may not cause interference, and
-(2) this device must accept any interference, including interference that may cause
-undesired operation of the device.
-
-CAN ICES-003(A) / NMB-003(A)<br/>
-CAN ICES-002(A) / NMB-002(A)
-
-This Class A digital apparatus complies with Canadian ICES-002 and ICES-003.
-
-Under Industry Canada regulations, this radio transmitter many only operate using an
-antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry
-Canada. To reduce potential radio interference to other users, the antenna type and its
-gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is
-not more than the necessary for successful communication.
-
-ISED Radiation Exposure Statement: This product complies with the Canadian Standard
-RSS-102 for portable RF exposure limits, set forth for an uncontrolled environment
-and is safe for the intended operation as described in this manual. Per ISED requirements,
-maintain a distance of more than 8 inches (20 cm) between any person and the host device.
-
 ---
 
 ## Support {#support}