From eb5d890fccc45f661d968e3dcbdcdc11b9e086d6 Mon Sep 17 00:00:00 2001 From: Jason Higgins Date: Fri, 27 Jun 2025 11:29:46 -0400 Subject: [PATCH] Updates standards compliance details --- .../husky/a300/user_manual_husky.mdx | 102 ++++-------------- 1 file changed, 21 insertions(+), 81 deletions(-) diff --git a/docs_robots/outdoor_robots/husky/a300/user_manual_husky.mdx b/docs_robots/outdoor_robots/husky/a300/user_manual_husky.mdx index 6f92f484..8d9e0185 100644 --- a/docs_robots/outdoor_robots/husky/a300/user_manual_husky.mdx +++ b/docs_robots/outdoor_robots/husky/a300/user_manual_husky.mdx @@ -1701,7 +1701,27 @@ See [Husky A300 Troubleshooting](troubleshooting_husky) for details on Husky tro --- -## Declarations +## Standards Compliance + +- CE-marked + - EN 61326-1:2013 + - EN 301 489-1 V1.9.2 + - EN 61010-1:2010, EN 61010-1:2010/A1:2019/AC:2019-04, EN 61010-1:2010/A1:2019 + - EN 301 489-1 V1.9.2 + - EN 301 893 V2.1.1 + - EN 300 328 V2.2.2 +- FCC Part 15 Subpart B +- FCC Part 18 +- ICES-002 +- ICES-003 + +### Declarations + +This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: +(1) This device may not cause harmful interference, and (2) this device must accept any interference received, +including interference that may cause undesired operation. + +CAN ICES-003(A) / NMB-003(A) :::note @@ -1711,86 +1731,6 @@ invalidate the markings and may require additional conformity assessments. ::: -### FCC Supplier's Declaration of Conformity - -**47 CFR § 2.1077 Compliance Information** - -**Husky A300** - -**Responsible Party** - -Rockwell Automation, Inc. -1201 South Second Street -Milwaukee, Wisconsin -53204-2410 - -**Point of Contact** - -Ryan Gariepy, CTO (OTTO Motors and Clearpath Robotics)
-ryan.gariepy@rockwellautomation.com
-1-844-733-6886 - -This device complies with Part 15 of the FCC Rules. - -Operation is subject to the following two conditions: (1) this device may -not cause harmful interference, and (2) this device must accept any -interference received, including interference that may cause undesired operation. - -Contains Transmitter Module FCC ID: PD9AX210NG - -Changes or modifications not expressly approved by Clearpath Robotics Inc. could void -the user's authority to operate the equipment. - -This equipment has been tested and found to comply with the limits for a Class A -digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide -reasonable protection against harmful interference when the equipment is operated in a -commercial environment. This product generates, uses, and can radiate radio frequency -energy and, if not installed and used in accordance with the manufacturer's instruction -manual, may cause harmful interference with radio communications. Operation of this -product in a residential area is likely to cause harmful interference, in which case you will -be required to correct the interference at your own expense. - -These limits are designed to provide reasonable protection against harmful interference in -a non-residential installation. However, there is no guarantee that interference will not -occur in a particular installation. -If this equipment does cause harmful interference to radio or television reception, which can -be determined by turning the equipment off and on, the user is encouraged to try to correct -the interference by one or more of the following measures: - - Reorient or relocate the receiving antenna. - - Increase the separation between the equipment and receiver. - - Connect the equipment into an outlet on a circuit different from that which the receiver is connected. - - Consult the dealer or an experienced radio/TV technician for help. - -FCC Radiation Exposure Statement: This product complies with FCC §2.1091(b) for mobile RF exposure limits, -set forth for an uncontrolled environment and is safe for the intended operation as described in this manual. -Per FCC requirements, maintain a distance of more than 8 inches (20 cm) between any person and the host device. - -### Innovation, Science and Economic Development Canada (ISED) Compliance Notice - -Contains Transmitter Module IC: 1000M-AX210NG - -This device contains a license-exempt transmitter/receiver that complies with Innovation, -Science and Economic Development (ISED) Canada's license-exempt RSS(s). Operation is -subject to the following 2 conditions: (1) this device may not cause interference, and -(2) this device must accept any interference, including interference that may cause -undesired operation of the device. - -CAN ICES-003(A) / NMB-003(A)
-CAN ICES-002(A) / NMB-002(A) - -This Class A digital apparatus complies with Canadian ICES-002 and ICES-003. - -Under Industry Canada regulations, this radio transmitter many only operate using an -antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry -Canada. To reduce potential radio interference to other users, the antenna type and its -gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is -not more than the necessary for successful communication. - -ISED Radiation Exposure Statement: This product complies with the Canadian Standard -RSS-102 for portable RF exposure limits, set forth for an uncontrolled environment -and is safe for the intended operation as described in this manual. Per ISED requirements, -maintain a distance of more than 8 inches (20 cm) between any person and the host device. - --- ## Support {#support}