Cloud Starter Kit for Raspberry PI
Switch branches/tags
Clone or download
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Type Name Latest commit message Commit time
Failed to load latest commit information.
scripts
README.md

README.md

CloudOver Cloud Starter Kit for Raspberry PI

This is set of scripts to prepare management node on Raspberry PI computer. Use it to prepare, install and configure your raspberry into the CoreCluster management with simple storage. This scripts create new templates, define storage and configure networks for CoreCluster

After installation you should be able to connect to the corecluster.pi wire- less network and connect with all your machines in the cloud.

Requirements

To launch your cloud on Raspberry you will need:

  • One Raspberry PI 3
  • SD Card, at least 16GB
  • USB Ethenret adapter
  • Micro USB for powering up the Raspberry PI
  • At least two ethernet cords (Red and green! :)
  • Optionally ethernet switch

... and as many computers as many nodes you want to connect to your cloud.

Preparation

Retreive the Raspbian image and prepare bootable SD card for your Raspberry. Then copy whole directory scripts into the / on the SD card (or to the /boot partition, if you don't have access to the ext4 filesystem)

Installation

Power up your raspberry. When it is ready, log in to the pi account with the raspberry password. Go to your scripts directory: cd /boot/scripts and execute installation script as root: sudo ./install_core.sh At the end of the installation you will be asked for the CoreCluster admini- strator login and password.

Booting

When installation is done, rebot your raspberry. The wireless network corecluster.pi should be available. Connect to it with the password: cloudoverpi CoreUI interface should be available at the address: http://core.pi.cloudover.io

In case of problems feel free to contact us: contact@cloudover.io or use our Google Group: https://groups.google.com/forum/#!forum/cloudover-users