--=======================================--
  Opening AMC with ID gem.shelf03.amc02
--=======================================--


--=======================================--
-> BOARD SYSTEM INFORMATION
--=======================================--

-> board type  : GLIB
-> system type : 20v1
-> version nbr : 1.9.4
-> sys fw date : 23/5/2017
-> ip_addr     : 66.73.76.71
-> hw_addr     : 49:42:47:4c:49:42
-> CPLD bus state : 0x34

-> amc slot #        : 4
-> mac address (ipb) : 42:49:4c:47:42:49
-> mac IP source     : 0x74c

--=======================================--
-> GEM SYSTEM INFORMATION
--=======================================--

TK_LINK_RX_POLARITY 0x00000000
TK_LINK_TX_POLARITY 0x00000000
BOARD_ID            0x0000beef
BOARD_TYPE          0x00000001
RELEASE             0x00010904
NUM_OF_OH           0x0000000c
USE_GBT             0x00000001
USE_TRIG_LINKS      0x00000001

--=======================================--
-> DAQ INFORMATION
--=======================================--

Traceback (most recent call last):
  File "/afs/cern.ch/user/d/dorney/scratch0/CMS_GEM/CMS_GEM_DAQ/cmsgemos/gempython/tests/amc_info_uhal.py", line 91, in <module>
    glibCounters(amc,options.gtx,True)
  File "/afs/cern.ch/user/d/dorney/scratch0/CMS_GEM/CMS_GEM_DAQ/cmsgemos/gempython/tools/amc_user_functions_uhal.py", line 58, in glibCounters
    writeRegister(device,"%s.IPBus.%s.OptoHybrid_%d.Reset"%(baseNode, ipbcnt, gtx),0x1)
  File "/afs/cern.ch/user/d/dorney/scratch0/CMS_GEM/CMS_GEM_DAQ/cmsgemos/gempython/utils/registers_uhal.py", line 192, in writeRegister
    device.getNode(register).getPath(),
uhal._core.exception: No branch found with ID-path "GLIB.COUNTERS.IPBus.Strobe.OptoHybrid_0.Reset" from node "top"
Not even a partial match found for ID-path "GLIB.COUNTERS.IPBus.Strobe.OptoHybrid_0.Reset" from node "top". If this address looks correct, please check for leading, trailing and stray whitespace.