Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Nothing displayed in the port drop down #8

Open
eciramella opened this issue Nov 4, 2018 · 5 comments

Comments

Projects
None yet
3 participants
@eciramella
Copy link

commented Nov 4, 2018

I'm sure it's something I'm doing, but with two pendants loaded (the tiny one for my phone and this one for my rpi touchscreen), the shopfloor one does not show anything in the ports dropdown.

I've successfully connected via the phone pendant and the normal cncjs interface, but for whatever reason, this one shows nothing in the ports drop down.

I'm happy to dig/poke/hack at this, but haven't found anything useful yet.

@eciramella

This comment has been minimized.

Copy link
Author

commented Nov 4, 2018

I regenerated the boilerplate code for the controller and the app and things seem to be working successfully.

@MitchBradley

This comment has been minimized.

Copy link
Collaborator

commented Nov 4, 2018

I hardwired the serial port list so it shows only the one connected to my TingG controller. That keeps me from making silly mistakes that cause problems in the shop. Here is a commit that undoes that change, restoring all the serial ports to the menu.

a22e50e

@qiwalker

This comment has been minimized.

Copy link

commented Feb 3, 2019

Dear Mr. @MitchBradley

can i use this without cncjs sir ?
like standalone web aplication

thanks
Rizki

@MitchBradley

This comment has been minimized.

Copy link
Collaborator

commented Feb 3, 2019

You need the server part of cncjs to run the cncjs-shopfloor-tablet user interface. The full cncjs user interface is not necessary. The server can run on a small computer like a Raspberry Pi. In my setup, I have an Arduino Due running g2core firmware, in the same enclosure as a Raspberry Pi Zero W running the cncjs server, connected via wifi to an Android tablet that displays the cncjs-shopfloor-tablet user interface.

@qiwalker

This comment has been minimized.

Copy link

commented Feb 20, 2019

thanks Mr. @MitchBradley

one more question
how to get list of gcode file sir
i can find anyting in drop down menu gcode file
im sory for my bad english

Regards Rizki

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
You can’t perform that action at this time.