diff --git a/src/current/_includes/v24.1/finalization-required/119894.md b/src/current/_includes/v24.1/finalization-required/119894.md
new file mode 100644
index 00000000000..f2b393c3c0e
--- /dev/null
+++ b/src/current/_includes/v24.1/finalization-required/119894.md
@@ -0,0 +1 @@
+[Splits](https://cockroachlabs.com/docs/{{ include.version }}/architecture/distribution-layer#range-splits) no longer hold [latches](https://cockroachlabs.com/docs/architecture/distribution-layer.#latch-manager) for time proportional to the range size while computing [MVCC](https://cockroachlabs.com/docs/{{ include.version }}/architecture/storage-layer#mvcc) statistics. Instead, MVCC statistics are pre-computed before the critical section of the split. As a side effect, the resulting statistics are no longer 100% accurate because they may correctly distribute writes concurrent with the split. To mitigate against this potential inaccuracy, and to prevent the statistics from drifting after successive splits, the existing stored statistics are re-computed and corrected if needed during the non-critical section of the split. [#119894](https://github.com/cockroachdb/cockroach/pull/119894)
diff --git a/src/current/cockroachcloud/upgrade-to-v23.2.md b/src/current/cockroachcloud/upgrade-to-v23.2.md
index 84828cc4f56..47f44461a97 100644
--- a/src/current/cockroachcloud/upgrade-to-v23.2.md
+++ b/src/current/cockroachcloud/upgrade-to-v23.2.md
@@ -135,7 +135,29 @@ Use the [DB Console]({% link cockroachcloud/tools-page.md %}) or your own toolin
Most {{ page.page_version }} features can be used right away, but some will be enabled only after the upgrade has been finalized. Attempting to use these features before finalization will result in errors:
-For an expanded list of features included in {{ page.page_version }}, temporary limitations, backward-incompatible changes, and deprecated features in the [{{ page.page_version }} release notes](https://www.cockroachlabs.com/docs/releases/{{ page.page_version }}).
+- The coalescing of storage ranges for each table, index, or partition (collectively referred to as "schema objects") into a single range when individual schema objects are smaller than the default configured maximum range size (controlled using zone configs, specifically the `range_max_bytes parameter`). This change improves scalability with respect to the number of schema objects, since the underlying range count is no longer a potential performance bottleneck. After finalizing the upgrade to v23.2, you may observe a round of range merges and snapshot transfers. To disable this optimization, **before finalizing the upgrade**, set the `spanconfig.storage_coalesce_adjacent.enabled` [cluster setting](https://www.cockroachlabs.com/docs/{{ page.version.version }}/cluster-settings) to `false`. Refer to the [v23.1 release notes]({% link releases/v23.1.md %}) for `SHOW RANGES` for more details. [#102961][#102961]
+- The new output log format, which allows configuration of a time zone in log output. Before configuring a time zone, the cluster must be finalized on v23.2. [#104265][#104265]
+- Performance improvements when a node reclaims disk space. [#106177][#106177]
+- The following [admission control](https://www.cockroachlabs.com/docs/{{ page.version.version }}/admission-control#operations-subject-to-admission-control) mechanisms, which help to maintain cluster performance and availability when some nodes experience high load:
- Delete operations
- Replication
[#98308][#98308]
+- Collecting a statement diagnostic bundle for a particular plan. The existing fingerprint-based matching has been extended to also include plan-gist-based matching and "anti-matching" (collecting a bundle for any plan other than the provided plan gist). [#105477][#105477]
+- A new system table, `system.region_liveness`, that tracks the availability and the timestamp of the latest unavailability for each cluster region. [#107903][#107903]
+- The ability of a `WaitPolicy_Error` request to push the timestamp of a transaction with a lower priority. [#108190][#108190]
+- Configuring a changefeed with the `lagging_ranges_threshold` or `lagging_ranges_polling_interval` [changefeed options](https://www.cockroachlabs.com/docs/{{ page.version.version }}/create-changefeed#options). [#110649][#110649]
+- Removal of the upgrade step `grantExecuteToPublicOnAllFunctions`, which is no longer required because post-serialization changes now grant `EXECUTE` on functions to the public role. [#114203][#114203]
+- A fix to a bug that could allow a user to execute a user-defined function without the `EXECUTE` privilege on the function. If a user does not have the privilege, the user-defined function does not run and an error is logged. [#114203][#114203]
+
+[#102961]: https://github.com/cockroachdb/cockroach/pull/102961
+[#104265]: https://github.com/cockroachdb/cockroach/pull/104265
+[#107474]: https://github.com/cockroachdb/cockroach/pull/107474
+[#106177]: https://github.com/cockroachdb/cockroach/pull/106177
+[#98308]: https://github.com/cockroachdb/cockroach/pull/98308
+[#105477]: https://github.com/cockroachdb/cockroach/pull/105477
+[#107903]: https://github.com/cockroachdb/cockroach/pull/107903
+[#108190]: https://github.com/cockroachdb/cockroach/pull/108190
+[#110649]: https://github.com/cockroachdb/cockroach/pull/110649
+[#114203]: https://github.com/cockroachdb/cockroach/pull/114203
+
+For an expanded list of features included in {{ page.page_version }}, temporary limitations, backward-incompatible changes, and deprecated features, refer to the [{{ page.page_version }} release notes](https://www.cockroachlabs.com/docs/releases/{{ page.page_version }}).
### Roll back the upgrade
diff --git a/src/current/cockroachcloud/upgrade-to-v24.1.md b/src/current/cockroachcloud/upgrade-to-v24.1.md
index ff894212a60..1c45f45f3fc 100644
--- a/src/current/cockroachcloud/upgrade-to-v24.1.md
+++ b/src/current/cockroachcloud/upgrade-to-v24.1.md
@@ -134,9 +134,11 @@ Use the [DB Console]({% link cockroachcloud/tools-page.md %}) or your own toolin
### Expect temporary limitations
-Most {{ page.page_version }} features can be used right away, but some will be enabled only after the upgrade has been finalized. Attempting to use these features before finalization will result in errors. {% comment %}TODO: List of temporary limitations for GA{% endcomment %}
+Most {{ page.page_version }} features can be used right away, but some will be enabled only after the upgrade has been finalized. Attempting to use these features before finalization will result in errors.
-For an expanded list of features included in {{ page.page_version }}, temporary limitations, backward-incompatible changes, and deprecated features in the [{{ page.page_version }} release notes](https://www.cockroachlabs.com/docs/releases/{{ page.page_version }}).
+- {% include v24.1/finalization-required/119894.md version="v24.1" %}
+
+For an expanded list of features included in {{ page.page_version }}, temporary limitations, backward-incompatible changes, and deprecated features, refer to the [{{ page.page_version }} release notes](https://www.cockroachlabs.com/docs/releases/{{ page.page_version }}).
### Roll back the upgrade
diff --git a/src/current/v24.1/upgrade-cockroach-version.md b/src/current/v24.1/upgrade-cockroach-version.md
index 59be71b63c9..dc37eec97d4 100644
--- a/src/current/v24.1/upgrade-cockroach-version.md
+++ b/src/current/v24.1/upgrade-cockroach-version.md
@@ -135,18 +135,9 @@ By default, after all nodes are running the new version, the upgrade process wil
When upgrading from {{ previous_version }} to {{ page.version.version }}, certain features and performance improvements will be enabled only after finalizing the upgrade, including but not limited to:
-- The coalescing of storage ranges for each table, index, or partition (collectively referred to as "schema objects") into a single range when individual schema objects are smaller than the default configured maximum range size (controlled using zone configs, specifically the `range_max_bytes parameter`). This change improves scalability with respect to the number of schema objects, since the underlying range count is no longer a potential performance bottleneck. After finalizing the upgrade to v23.2, you may observe a round of range merges and snapshot transfers. To disable this optimization, **before finalizing the upgrade**, set the `spanconfig.storage_coalesce_adjacent.enabled` [cluster setting](https://www.cockroachlabs.com/docs/{{ page.version.version }}/cluster-settings) to `false`. See the [v23.1 release notes]({% link releases/v23.1.md %}) for `SHOW RANGES` for more details. [#102961][#102961]
-- The new output log format, which allows configuration of a time zone in log output. Before configuring a time zone, the cluster must be finalized on v23.2. [#104265][#104265]
-- Performance improvements when a node reclaims disk space. [#106177][#106177]
-- The following [admission control](https://www.cockroachlabs.com/docs/{{ page.version.version }}/admission-control#operations-subject-to-admission-control) mechanisms, which help to maintain cluster performance and availability when some nodes experience high load: - Delete operations
- Replication
[#98308][#98308]
-- Collecting a statement diagnostic bundle for a particular plan. The existing fingerprint-based matching has been extended to also include plan-gist-based matching and "anti-matching" (collecting a bundle for any plan other than the provided plan gist). [#105477][#105477]
-- A new system table, `system.region_liveness`, that tracks the availability and the timestamp of the latest unavailability for each cluster region. [#107903][#107903]
-- The ability of a `WaitPolicy_Error` request to push the timestamp of a transaction with a lower priority. [#108190][#108190]
-- Configuring a changefeed with the `lagging_ranges_threshold` or `lagging_ranges_polling_interval` [changefeed options](https://www.cockroachlabs.com/docs/{{ page.version.version }}/create-changefeed#options). [#110649][#110649]
-- Removal of the upgrade step `grantExecuteToPublicOnAllFunctions`, which is no longer required because post-serialization changes now grant `EXECUTE` on functions to the public role. [#114203][#114203]
-- A fix to a bug that could allow a user to execute a user-defined function without the `EXECUTE` privilege on the function. If a user does not have the privilege, the user-defined function does not run and an error is logged. [#114203][#114203]
-
-For more details about a given feature, refer to the [CockroachDB v23.2.0 release notes](https://www.cockroachlabs.com/docs/releases/v23.2#v23-2-0).
+- {% include v24.1/finalization-required/119894.md version="v24.1" %}
+
+For more details about a given feature, refer to the [CockroachDB v24.1.0 release notes](https://www.cockroachlabs.com/docs/releases/v24.1#v24-1-0).
## Step 4. Perform the rolling upgrade