Skip to content
Remotely control and view SWR graphs of your SARK100 or MINI60 antenna analyzer from your PC
Branch: master
Clone or download
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Type Name Latest commit message Commit time
Failed to load latest commit information.
analyzer
README.md

README.md

NOTE: I am not the original author of this software; this software was originally created by Jeremy Burton, and I have moved these changes here from http://jedi98.uk/antenna_analyzer.php so I can share changes allowing this software to be compiled and executed on OSX.

SARK 100 / MINI 60 Antenna Analyzer GUI

Requirements

  • QT Framework

Installation Instructions

Linux

From the project directory, run the following commands:

mkdir build
cd build
qmake -spec linux-g++-64 -o Makefile ../analyzer/analyzer.pro
make

You can then run this software by running ./analyzer.

OSX

From the project directory, run the following commands:

mkdir build
cd build
qmake -spec macx-g++ -o Makefile ../analyzer/analyzer.pro
make

You can then run the program by running open analyzer.app.

Running a Scan using a SARK100

  1. Turn on your antenna analyzer and connect it to your antenna.
  2. Press the "Config" button until you see the words "PC Link" on your screen, then press the down arrow. Your screen should now show the message "Waiting Link".
  3. Use a USB cable to connect your computer with your antenna analyzer.
  4. Open the Antenna Analyzer app you compiled using the instructions above.
  5. From the Antenna Analyzer app, use the "Link" menu to select your device. You probably have only one option displayed, but if there are multiple options, you may need to perform some experiments to identify which of the listed devices is your Antenna Analyzer.
  6. Use the displayed GUI to select which frequencies you'd like to scan, and press the "Scan" button.
You can’t perform that action at this time.